Determining Ver number on WRT54G for firmware upgrade

I can find no version number in the config or on the box.
How do I determine which version of firmware to use 1.0, 1.1, 2.0, 2.2,  etc
thanks

Found it !
Save a restore file and the name will have a version number in it.
I have a version 1.0

Similar Messages

  • WRT54G ver.6 no WLAN after firmware upgrade

    I just did a manual firmware upgrade for the router (WRT54Gv6 v1.02.2_fw)... when I went to rest it by holding down the rest button for 30 seconds, nothing appeared to happen. The light for the WLAN is now out. When I go to directly connect it to a computer, it says 'limited connectivity' local only. The Power, 1, and Internet lights still blink. I cannot access the web browser utility at 192.168.1.1 (nothing loads). Resetting still doesn't appear to do anything (lights don't flash off or change or anything)... Any ideas?

    Open a DOS window and do "ping 192.168.1.1". If you get replies, there's still a chance. If it times out or any other error message then it can't be helped. If the router is less than 3 years old, call linksys for a replacement.
    The box said windows xp or better... So I installed Linux!

  • WRT54G V8 firmware upgrade, easylink issue

    I was having the typical dropped  connection issues  that these routers seem to be famous for (WRT54G).   The easylink application was installed and working.  I upgraded firmware to the newly released 8.00.4.  After the firmware upgrade the easylink app.  still worked for all functions except for setting wireless security.  For that, any changes had to be input manually through the web based utility or whatever it is called (inputting 162.198.1.1)  in the adress bar. 
    I had a software conflict and had to uninstall the Easylink advisor software and then reinstall it.  After reinstalling,  the easylink will not recognize the router at all.  Message states something to the effect that the router is either an old Linksys not supported by easylink or another brand.  I know this has to be because the easylink has not been updated to work with the new version of the firmware.
    Is there any way to get the Easylink advisor to recognize the router with the new firmware?
    Or, is there a link to the previous firmware version so that I can flash the router with the previous version?  Then I could get the easylink to recognize the router again and will only lose security access after I re-flash with the new firmware.
    Or, is there anything else I can do to get the easylink advisor software to recognize the Router with the new Firmware installed?
    Thanks

    The Easy Link firmware should connects using the new firmware ....
    Reset the router for few seconds ,.......After reset disable all firewall & run Easy link tool .....
    It will work .....

  • Looking for Firmware upgrade for IPOD to play when connected to Onkyo RCVR ?

    Onkyo support tells me their is a Firmware upgrade for my IPOD NANO that will allow it to play when connected to their reciever.  Newer IPODS work fine.  With my the Onkyo recognizes the IPOD, reacts like it is playing but does not play.

    Connect it to your computer and upgrade it in iTunes.

  • Safe boot required for firmware upgrades??

    The two recent firmware upgrades, EFI and SMC, both required me to do a safe boot for the firmware to install. Is this normal behaviour?? Trying to do the firmware install from a normal boot results in in an installation failure.
    Possibly related, the "fixed" version of Parallels crashes the Mac during the install. If I try the same install during a safeboot, it will install. However, the system will panic during a normal boot until Parallels is uninstalled.
    Thoughts?? Advice??? Thanks!
    -Phil

    Safe Mode boot…
    http://docs.info.apple.com/article.html?artnum=107393
    You get updates by running Software Update (System Preferences else it's the 2nd item in the Apple menu).

  • Hard connect for firmware upgrade?

    In my investigations as to what set-up I would llike to use for my wireless network, I noticed that DLink is adamant that their firmware upgrades be done with the router hard wired to the computer, rather than wirelessly.
    I wonder if that is advisable for upgrading Airport Express firmware? I didn't see anything to that effect on the Apple download site for the January, 2006 version of the firmware. The assumption seems to be it's OK to conduct the upgrade wirelessly.
    Can one connect the Airport Express via ethernet to the computer and perform the upgrade that way? Would that remedy the problems some have reported applying the upgrade. Would that require Airport Extreme be turned on? Would any damage be done by trying the upgrade this way?
    Any feedback would be much appreciated.
    Thanks...
    iMac Dual Core; iBook G4 12"   Mac OS X (10.4.7)  

    I think you will find that hooking up with an ethernet cable and hard wireing will always be a little better than downloading updates wireless, for speed and accuracy, That being said in many instances it is not a must.
    The reason some ADSL modem manufactures recommend the hard wired method is to avoid any mistakes, thus making sure of the accuracy of there firmware update.
    Your assumption is in fact correct that it is OK to conduct your upgrades wirelessly. The only time is when the manufacture recommends you do an operation HARD WIRED, they do this for a reason.
    Without going into a lengthy disertation. Some Hardware, Software, etc have verification keys that allow your machine, software and hardware to recognize said applications for the download process.
    So in the real world it is better and faster hardwired, but not a must in most cases.
    Cheers Don

  • WRT54G v6 firmware upgrade under Vista problem

    I'm not sure if this is related to Vista or not.
    I downloaded the correct firmware version for WRT54G v6 and selected upgrade using the web interface. After a few minutes, the browser directed me to a site with the following URL
    http://192.168.1.1/upgrade.tri
    My IE7 had problem displaying this page and the Power LED on the router kept blinking. I tried to connect to the web interface and it was still showing Firmware Version: v1.00.9
    I don't think there is anything wrong with what I did and not sure if the upgrade was successful. Any suggestions?

    I had the same problem. I found the solution here http://www.scorpiontek.org/portal/content/view/27/36/1/3/:
    This could be because you are accessing the router over HTTPS. You cannot upload firmware or settings to a WRT54G v5 over a HTTPS connection unless you have Linksys firmware v1.00.9 or later. Try accessing it using just plain HTTP.
    Enabling and using http instead of https worked for me. No need to reset or reconfigure.
    I upgraded from 1.00.1 (IIRC) to 1.02.2.

  • WRT54GS V6 - Firmware upgrade needed (2.07.1) not available?

    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing?  Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)

    gasnyder3 wrote:
    Trying to Install WRE54G V3 to existing WRT54GS V6.
    According to the WRE help screens, I understand that I need at least 2.07.1 firmware in the router (mine is currently @ 1.50.6)
    However, when I go to download the firmware, the latest version available is 1.52.0
    What am I not understanding/missing? Thanks, George
    P.S> Even though I did download firmware V 1.52, I was not able to 'expand' it as my trial version of Stuffit claimed it could not recognize the file...)
    What is the model number plus version of your router?
    In your heading you say you have GS ...in your message you say you have a
    G router You also say in your message you are upgrading from G V3 to GS
    v6
    If you have a G router you have to update to the latest G firmware not GS and vis versa

  • Need to know serial number and product for serial # upgrade screen

    I have the serial # for the ADobe XI standard product that I purchased, but that product is not available in the dropdown list

    what product are you trying to install and is it an upgrade?  if it's an upgrade what product is being upgraded?

  • Cs5 serial number not allowed for cs6 upgrade?

    hello
    I am trying to install CS6 Design Premium (via CD) and have CS5. However I am denied installation because my CS5 serial number is not allowed (it appears I must have CS5.5).  All phone lines are engaged. As well as frustrating, this would seem a very poor 'stealth' trick. I have countless registered Adobe copies going back years and saw no warning re this possibility prior to purchase. Is installing from CS5 impossible?

    phew! I took your advice and after many dropped phone connections, I was able to speak to Prashant (Adobe service rep in India) who was able to take create a (temporary) support number for me to type in to the registration dialogue via the challenge code procedure. This appeared to bypass the registration dropdown issue and so allowed me to register... at last!
    In retrospect I am very grateful for your help and my good fortune in being able to speak to Prashant who was able to fix the problem over the phone. However I suspect this problem may occur to others and the solution seems far from easy when long phone queues and dropped connections add to the tortuous minefield of what is simply meant to be a registration process!
    best regards in all events
    Simon

  • Why does my cs5 serial number not qualify for an upgrade?

    I input the serial number for my cs5 product in order to quality for the adobe customers special and it doesn't qualify. Any idea why? I wanted to chat with an Adobe representative but was only given the forum as an option.

    What KIND of CS5 do you have... regular or volume license or OEM that came with a computer or education or ???

  • WRT54GS V6 Firmware Upgrade

    I am trying to do a firm ware upgrade to the WRT54GS V6 router.  However, when I go to its web page (192.168.1.1) -  alI get is the layout of the Linksys web page, but no text labels or links.  I can not do anything - any suggestions?

    I used Firefox 2.0.0.2 and IE 7.0 Just this morning without such incident. The problem is definately in you computer.
    I'd imagine that the page loaded improperly the first time and it's now stuck in your browser cookies erroneously. Exit the poorly loaded page, then clear all cookies, browser histories and temporary files, and then close and restart your browser. When you go back to the IP address page it may load properly the second time.
    Hope this helps!

  • Firmware upgrade from 2.1(3a) to 2.1(3b).

    I don't find any documentation on the web for firmware upgrade from 2.1(3a) to 2.1(3b)..
    is it wise to follow this link http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.1/b_UpgradingCiscoUCSFrom1.4To2.1.html
    Any best practices ?

    I would consult
    http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2.1/b_GUI_Firmware_Management_21.pdf
    Cisco UCS B-Series GUI Firmware Management Guide, Release 2.1First Published:
    Last Modified: July 12, 2013November 16, 2012

  • Which one is better for iOS Upgrading Laptos or Desktop PC

    I have used my notebook for upgrading iOS many times.. after long time i used my desktop PC to did that upgrading .. I feel some performance different in my phone... any ideas about that?? or any recopmendation for upgrading .. and whichone is better for firmware upgrading purpose.. i mean notebook or desktop pc??? 

    It makes no difference whatsoever.

  • E70 Firmware Upgrade??

    I have just got a E70 phone, great phone and with python available.
    There were a couple of annoying "bugs" I noticed in using it over the last couple of days (one is mass-storage stops working randomly)
    A mate recomended search for firmware upgrade
    So checking my firmware with *#0000# I get:
    1.0610.05.07
    30-05-06
    RM-10
    Nokia E70
    and looking around I see that version: 2.0618.07.10
    is about
    BUT using the nokia software updater is says no upgrades are available?
    This is a contract phone with Vodaphone (UK) and the code in the battery compartment is: 0531051
    any help apreaciated.
    ps. Nokia suite connection works and all

    I Got a reply from Vodaphone
    Dear Mr. #####,
    Thank you for contacting Vodafone Customer Service about Nokia E70.
    Please can you take your phone to your local Vodafone store so that they can check it and give you the possible resolution.
    Please can you click on the URL (Uniform Resource Locator)
    http://www.europe.nokia.com/softwareupdate
    to get automatic updates.
    If there is anything else we can help you with, please feel free to contact us.
    Kind regards,
    Vodafone Customer Services
    We hope you have found our Email Customer Service helpful and convenient. To contact us please click
    'Contact Us'.
    So basically the E70 *should* be able to auto-update via the program BUT for some reason Nokia are not allowing it?
    edited to remove nameMessage Edited by orinoco on 06-Nov-2006
    12:37 PM

Maybe you are looking for

  • How to display diferent Title by using diferent TC in one Report

    Hi all, Ich have a problem by Implementation: So my Report must be calling from 2 Transactions Transaction 1 call Report 1 --> show title 1 (exp. Windows was called by Transaction 1) (start window - Dynpro screen 1000) Transaction 2 call Report 1 -->

  • Using my 30 inch Cinema display to watch my Comcast Cable?

    Just a thought, my monitor is much larger than my tv. Is there such a way to hook my cinema display into my comcast cable/dvr box? Thanks, Christine

  • Why does my custom HTML newsletters absolute image urls get changed into imap: urls

    I made a custom newsletter email in which all my images are absolute URLS. I use Thunderbird to send it out through my imapped google email account. Once I send it the URLs get changed and for some reason brings my tracking URL into the image URL as

  • Join-types right & full outer join with Datasets

    Hello I use Crystal Reports XI Release 2 with ADO.NET Datasets as datasource. In the "Database-Expert" I try to set the "Link-Options". Unfortunately are the join-types "right outer join" and "full outer join" disabled. - Is this because of the datas

  • Problm making sqlserver2000 dsn

    whenever I am creating DSN in SQL2000,than I recived this msg Connection Failed: SQLState:'01000' SQL Server Error: 53 [Micosoft][ODBC SQL Server Driver][DBNETLIB] ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [M