Determining volume/gapless playback freezes iTunes when using NAS

I finally copied my CD collection onto a NAS/Squeezebox Server but after adding it to my library iTunes freezes trying to determine the volume and gapless playback info. The only thing I use iTunes for is moving songs onto my iPhone so I don't care about gapless playlists or the relative volume.
I've seen this issue in numerous other posts but none of the solutions have worked for me. I've tried to turn off Soundcheck in both properties and the burn menus but it doesn't help.
Any help would be appreciated.

Can you see which song iTunes is hanging on? If you can, before opening iTunes, delete (or move it) from the iTunes music directory. It may be corrupt and causing all your problems.

Similar Messages

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

Our iMac (intel, 11.2) freezes up when using Time Machine for Back Ups. We have 16GB of RAM and the BU drive is 1 TB on firewire.

See Pondini's TM FAQs for starters.

APPLE: PLEASE NOTICE gapless playback crashes iTunes--how to turn it off?

Most of the time when my iTunes starts to "determine gapless playback", it crashes. I have to re-start iTunes and run my sync (10 minutes) over again. VERY FRUSTRATING.
I have tried something I saw on another bulletin board, which was an attempt to turn off Gapless Playback:
--go into iTunes;
--select ALL songs;
--RIGHT click;
--select Get Info;
--it will now ask "Are you sure you want to edit information for all items"...click YES;
--in the lower right-hand corner of "Multiple Item Information", check the box that says NO to gapless playback;
--hit OKAY.
iTunes then goes through and removes gapless playback. PROBLEM with this solution: it doesn't stay. Every time you do anything on iTunes, it reverts to gapless playback.
Has anyone else found a work-around or a way to permanently turn off gapless playback? Or is this an Apple problem that they need to solve in the next iTunes release?
R
Windows XP

As when stopping the play of a song with the music app.
There is a pause button and a fast forward button to the next song above the volume level indicator at the bottom. Select the pause button which will turn to a play button. When wanting to start playing again, press the play button.

IPod freezes iTunes when connected to computer

Whenever I connect my iPod to my Dell laptop iTunes freezes. When this happens, iTunes does not crash, it only freezes. During this time, iTunes will finish the song that it is playing (if doing so), but after the song finishes no further media will play. Also, the iPod does not show up on the sidebar of iTunes at this time (iTunes appears exactly as it was before connecting the iPod).
I am unable to eject the iPod safely at this point as the computer tells me that the system is using the iPod. If I remove the iPod from the computer, the error message: "Unable to sync iPod" comes up in iTunes. At the same time the iPod shows up on the sidebar of the iTunes, but it disappears as soon as I click "Ok" on the error message. At this point, iTunes returns to normal and is no longer frozen, even without restarting.
I have tried using a different computer and the same thing happens. I have also tried a different cable and the same exact thing happens.
Most recently, I have tried putting the iPod into disk mode, but still the same thing happens when I connect it to the computer.
If I go into My Computer (the same thing occurs in or out of disk mode) and click on the iPod, it will take me to the iPod folder, but My Computer will begin to Not Respond and then the only way to close it is to force close the window (ctrl, alt, del). If I right click the iPod, the drop down menu to access properties or to format the iPod comes up, but once again My Computer begins to not respond and I must force close it.
My iPod is an iPod Classic, 120 GB.
My computer is a Dell Laptop, Studio 1558
I have also tried on a Dell Desktop

OK, lets check out the iPod's hard drive...
*Check your iPod with Diagnostics Mode*
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

Has anyone experienced there computer freezing up when useing Photoshop CS4 or SC5

My two computers both freeze up when I am useing Photoshop (working with a large file 82-120 megs with multiple layers, channels and paths) it only ocurred when useing Photoshop. Otherwise the computrs works fine for every day tasks for buseniss and personal use, admittedly, I do not have any other resource intnsive applications other then QuickBooks or maybe a large Excel spreadsheet but I have no problem with these large files. I am not a gamer or I could try a game I hear that they can be resorce intensive.
My first computer is used for personal and business. this computer has a number of programs on it, including Kaspersky internet security but it is not lacking in resorces, It is a Intel based computer, sporting Intel quad core 2.5 GHz CPU. running on a 32 bit Windows 7 operating system, its list of components are 4 gig ram, Nvidia Geforce 9600 GT graphics card (on the Adobe approval list sporting open GL) 4 sata hard drives, 750 watt power supply, Asus P5N-D SLI motherboard, the tower case has 7 fans and the CPU is water cooled.
I run Photoshop CS4 on this unit.
after I experienced this loss of critical files I call the tech support line to see if they could help with recovery of the file and to ask if they had a way to prevent this from occuring again.
They said that I could wave bye bye to the file and the work, additionaly they said if I was working with large files like that, I should be runing a 64 bit system that could utilize additional memory.
I really like working with the large files so I bit the bullet and spent the money for the 2nd computer that I would use as a dedicated Photoshop workstation.
the second system has many of the same components because they have worked admirably. the key difference is as followes. 8gig ram, 64 bit Windows 7 operating system, Photoshop CS5 and the only other software is the drivers for the wacom intos4 tablet. I desided not to install any type of antivirus program because I will not be useing it on the internet except when it needs to connect to Adobe for whatever. my decision not to install antivirus can be reversed but I did not want any questions about it slowing up the computer.
This system with Photoshop CS5, freezes up faster then the CS4 system.
When I say Freezes up what I am referring to is the mouse and keyboard will not respond. Control/alt/delete will not bring up the task manager. Eventually I give up and have to force a shut down by pushing and holding the case start button for about 5 to 8 seconds.
when I restart the system I check the file that I have been working and several times the file that I was working on is corrupted beyond Photoshops ability to open.
I have used the windows 7, on board, memory diagnostics and it claims that all of the memory is fine I have reviewed the event logs and the only critacal errors are about the system being improperly shuting down. I even went to the trouble to click on the link for each error that will take you to Microsofts website and will serch for anything they have about that event and they had no help on the event.
People with mac computers have had a similar problem that had to do with there fonts and plugins, but I do not have a mac and I have not installed any plugins. The CS5 is as it came from the factory and the Mac people kicked me out telling me to get over on my side of the street where the rest of the windows outcast are but that was only after they thought they had there problen solved. Its so funny, but losing these files is not, Please Help

Thanks everyone for jumping in with both feet.
Let me review what I have already done.
(1). I have already witnessed how the wround driver for the tablet will wrack havoc. when I first started the 64 bit version of CS5 it would not recognize any PSD files at all and if you went to the file and right clicked looking for the (open with) dialog box forget-about-it the option for Photoshop was not an option.
I called Adobe tech support and they told me that I was not going to be able to use the Wacom tablet with the 64 bit versionof Photoshop. I found that a little suspicious seeing how Wacom tablets are the most preferred pen tablets for professional illustrators.
I contacted Wacom and they explained that I needed to uninstall the Wacom tablet, reboot the computer, go to the website, download the new 64 bit drivers and then reinstall the tablet. after I did that. Photoshop found all of my files and opened just fine.It was only then that I found out about the freezing proplem with the 64 Bit version.
A number of the helpful people here have tried to advise this to me but I have already be down tha road.
(2). I have the latest drivers for the BFG Nvidia Geforce 9600 Gt, released in April of this year and I had already new that the were necessary for the open GL so this is one of the first things that I tried.
Some one from our cousin Mac's side of the famaly and (Noel just suggested) that I try turning off the open GL. As soon as cousin Mac asked us to try this I did it (Them being famaly and all).
I was able to give it a try on the 32 bit system on Thursday 7/8/2010.
I was able to work on a very large file with a multitude of layers, channels and paths for about 5 hours before if froze. after the reboot I found that the file was fine and retained everything up to my last save.
But this test is only good as circumstantial evidence because the freezes are somwhat random. They mosly happen after I have been working with a large file for quite some time but some times it can happen very quickly, maybe 25 or 30 minutes.
Bye the way I really enjoy the humor, the Mac people are very serious people.
the Mac users are just grouchy because they expect their computers to "just work", and of course they don't.
We PC users have been given no such expecatations. THANKS NOEL
Oh, don't worry about them mean old grumpy PC wanna be Mac peoples. Gota luv it THANKS dec9
and Eight thousand dollar papper weight says it all. THANKS $8000paperweight.
(3) the memory, CPU and mother board can not be ruled out completly, just yet
As for the memory I have used the on board windows 7 diagnostics and it passed. but this is a unreliable test for hevy-resource dependent applications and a load or stress test would need to be done to be confidend.
I have a number of computers with the same kind of ram but after swaping them around I can not say that I have had any lasting results and it is compecated by experiences like what happened to me after turning off the open GL. What if I had of only worked for 4 hours? I would of thought that the problem was solved thats what would of happened
Do any of you work with files like I have been talking about? and if so do you experience any problems?
The motherboard can not be rulled out by any tests that I know of other then process of elimination which is at the heart of all sound diagnostics.
I downloaded a utility that is helpful called (Cupid Z) that gives real time monitoring and idenification of components.All the voltages seem fine.A.
I hope I will be able to up load the screen shots so you all can have a look see.
The CPH is more than likely not the problem.
I do have the option to install Photoshop on a third computer that has most of the same components but has a different Intel CPU. this would rull out any compatability issues (CPU with the Board) but if that were the case I dought that every other progrem under the sun works fine except Photoshop.
dec9, I did delete the prefs on the 32bit system but I have not had time to test the operation of Photoshop as of yet.
Lastly I will try to upload the screen shots of (Cupid Z) you will see that the latencys and the frequency are correct. Under the SPDscreen the plausible timinigs for verious common frequencies are given,, all seem to be with in range. The lantency are inside the spec.given by Corsair;s website
Asus provides a utility that allows you to monitor Temptures and voltages and I hope to send you a screen shot of this and you can see that they all are correct.
I would like to send the event log but I am not sure how to do that if someone could give me the 411 on how to do this I will send them to you I have saved the errors in several file formats but I cant see how you cold read them on this little page Thanks again POBOX119 signing off

My ipod has stopped working since the laptop turned off during synching.it shows no music and wont play games also is slower,constantly resets and freezes itunes when connected to computer.if i switch it off a spinning wheel appears till batt dies.help?

My Ipod has stopped working properly since the laptop shut down during synching.
My ipod is being slower and wont show any music. when I go into general settings it says the music and videos are loading..
It wont let me into settings all of the time either.
My applications and games have become slow or unresponsive.
The ipod keeps resetting itself, I have tried resetting it to no avail.
I tried plugging it into itunes but it freezes itunes and wont show up on my computer.
When I switch off the ipod it shows a spinning wheel until the battery dies, which could be nearly 2 hours!!
does anyone have any advice as to what to do?
currently ive reset it - nothing has happened
ive let the battery drain itself then recharged it to see if that would make a difference - no difference
Help ASAP needed

Try restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.
If still problem make an appointment at the Genius Bar of an Apple store. If your iPod is with in the one-year warrranty, not abused and defective Apple will replace it.

Ipod freezing itunes when being plugged in and not recognised

hi,
can anyone help me... i have an 30gb ipod and have tried everything to get it working with itunes. It works fine with others computers but with mine it just freezes itunes. As soon as i plug my pod in it freezes itunes. Sometimes if i'm lucky it starts to update it but then after 5 minutes it freezes itunes again. I have tried the 5 r's. I have installed the latest SMTP driver for xp. I have tried everything that apple have suggested on there sopport pages and nothing has helped. I have even reformatted my laptop just to get it to work but no luck.
If someone could please help me it would be much appreiated. It was a christmas present from someone close to me and don't wanna give up on it because have all ready spent many late nights on it.
Thanks

I get exactly what your describing and I noticed we are using the same laptop!!
I did not notice originally as I've got an old 40gb click wheel, about 3/4 years old. The battery is not great so assumed it may have been that but even fully charged I'm getting no luck.
I also followed the 5 r's and all the other suggestions for Ipod in My compute but not in itunes but nothing has worked. I cannot get my laptop to recognised my ipod via Itunes but it see's it fine via My Computer.
Both the Ipod and Itunes work fine without each other, Ipod plays songs fine etc and Itunes downloads music from cd etc and still performs all the usual functions but nothing else works.
I'm desperate for help as I run every day and buy a new cd each week and at this rate I'm going to have to dig out my old CD player!
Also just a point of note I looked the price to get my Ipod serviced as I figured this may help but the price quoted from apple was £160+...you can get a new 30gb for less...talk about customer explotation!!

IPhone not recognized in iTunes when using WiFi sync

I have found that my iPhone is frequently not recognized when using WiFi sync. The only way to sync my phone when that happens is to use the old fashioned way--connect it to my computer via USB. Then the phone is recognized and syncs fine. The device shows even when I take my iPhone off power. But when I close iPhone and later reopen it and plug in my iPhone to power, often it is not recognized. I've tried everything I can think of but nothing works.
Any ideas?
talbryn

I am having the same problem. It was working just fine and then just mysteriously stopped showing up in iTunes (my iPad still shows up & syncs via wifi just fine--it is just my iPhone). Someone please reply soon, this is driving me nuts! Thanks in advance!!

IPhone freezes ITunes when connected

HELP!!! (please)
My iPhone wilnot show up in iTunes and when I connect it, it freezes iTunes.

Welcome to the discussions,
check this article "iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues"
http://support.apple.com/kb/TS1421

Firefox freezes up when using facebook

computer freezing up when in facebook
== URL of affected sites ==
http://facebook.com

To fix computer freezes or facebook freezes problem, follow these guidelines to fix it:
* First, small size of RAM makes computer slow.
* Secondly, corrupt windows registry causes freezing in computer.
* The third most important thing that you can do to optimize your Facebook is to optimize your internet connection.
* So it is recommended you use a system utilities software that provides the feature of internet optimizer.
* Also remove unwanted add-ons/extensions from your browser.
* It is also recommended to clean system junk and browsers junk.
The above guidelines allow you to Avoid Facebook Freezing and keep your Windows properly maintained.
I got some help from this article to avoid '''[http://ezinearticles.com/?Facebook-Freezes---Why-Does-Facebook-Freeze?-And-How-to-Fix-It&id=3978935 Facebook Freezes]'''.
Hope it works for you also.

IPhone 6 does not show in iTunes when using WiFi

My iPhone 6+ shows up in iTunes when connected via USB. But if I disconnect the cable and turn off iTunes and then come back later it does not show up like my iPhone 5 did using OS 7.
I have the option selected in iTunes to "automatically connect using WiFi".
I have tried turning off my phone and restarting iTunes but it does not help.
Any suggestions?

Greetings Paul,
It sounds as though you are attempting to sync with iTunes via WiFi, and are running into some complications. After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes WiFi sync:
Sync using Wi-Fi
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable.
Click the Device button in the upper-right corner. (If viewing the iTunes Store, click the Library button first.) If you don't see your device, choose View > Hide Sidebar.
In the Summary tab, select "Sync with this [device] over Wi-Fi."
When the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when the following conditions are true:
The iOS device is charging.
iTunes is open on the computer.
The iOS device and the computer are on the same Wi-Fi network.
While the iOS device is in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device doesn't appear in the Devices section or you can't sync, please try these steps.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

ISO5.1 in iPad freezes iTunes when syncing

ISO5.0.1 in iPad freezes iTunes on my computer when syncing, how do i roll my iPad Firmware back to ISO5.0?

Glad to help, but not what you wanted to hear though.

MBP2013: itunes playback skips when using NAS

Hi,
I have a Late-2013 MBP with 16MB RAM. When i listen to music from my NAS (WD MYBOOK DUO) I frequently experience skips/gaps in the playback.
I listen to the same files on my iphone without issue, and also access them from a second computer (windows, old laptop) over the same network without issues.
I can only conclude it's something to do with the way my MBP access and/or buffers the songs for playback.
All software is up to date.
I'd appreciate any assistance, because the current situation is obviously untenable.
Thanks,
James

1) I put the two of the files I've been having trouble with on the desktop, added them to itunes and they played flawlessly. I should mention I've been having this issue consistently since trying to play music on the NAS across a range of, but not all, songs. The issue seems to be with larger (ALAC) rather than smaller (AAC) files, but I haven't tested this definitively.
2) The MBP is connected to the NAS wirelessly. I have an airport extreme router (the last version before they went to the tour. The NAS is wired to the router.
3) I use itunes on the MBP to listen to music. On my old windows laptop I used jrmc and itunes, both played with nil issues in the same wireless configuration as the MBP is in. The old laptop continues to access the NAS with nil skipping.
My hypothesis is that there's some issue with buffering the large (all?) files on the MBP. I haven't changed any settings from the factory defaults.
Any assistance to solve this would be sincerely appreciated.
James

My ipod shuffle freezes Itunes when trying to sync on my pc but it works on my sons computer?

Can someone help me, I was given a 4th gen shuffle and tried to sync music to it on my computer but when I go to sync music itunes freezes, not my computer just itunes? I have no problems with my younger sons ipod 4 8gig? When we tried to sync music from my older sons mac it worked no problem? Very strange itunes is obviously identical yet for some reason will not work on my computer? I tried all kinds of way I found in other forums but nothing has worked. I have restored the shuffle I have even unistalled itunes and re installed on my computer? Nothing is working yet my sons mac no worries? Anyone have this issue? Apple will not assist as no warranty left so assistance cost $$. Desperate please help I love the shuffle but do not want to rely on my sons computer. Thanks.
Oh yeah I am using Windows 7

I had something similar a couple of week ago, it would scroll then stop, scroll then stop.
At some point the porblem went away.
Try unpowering and restarting your AppleTV. Rsetart iTunes too.

Error messages in iTunes when using multiple libraries

Hi there -- my boyfriend got a new iPod yesterday, a 5th generation 30G. I have a 4th generation 20G that I've been using for about half a year. After some difficulty getting it set up, thanks to extra editions of iPod software on the computer conflicting with iTunes 7, we finally got the iTunes recognizing his new iPod.
I created a seperate library for him (like you can in iPhoto, where you press shift when you start the program to choose your library). When I plug the 30G iPod in, iTunes recognizes it and starts updating. It gets about halfway through the songs that need to be updated, and then an error popup shows up that says something like "iPod cannot continue updating because the file or folder is corrupted." It's not stopping on a particular song or album; it seems to stop about halfway through the list of songs it's updating, whether it's adding 10 songs or 50. If I click "OK" (the only option), it continues updating; when it's done I get the "iPod has finished updating" message.
Then, if I press eject I get another error: "iPod cannot eject because it is being used by another program." The iPod still has the "Do Not Disconnect" symbol at this time, instead of switching to charging like it should once it's done updating. I have to pull the USB cord from the computer or shut down iTunes to get it to stop.
The iPod will update and seems to work fine, but this makes me worry that there's a problem that will only get worse with time, and I'd rather deal with it now. I also don't know if I should keep disconnecting the iPod when it's tell me not to even though it's updated, if I can help it.
Is it the software on the iPod (fully updated)? Or perhaps having two libraries (the one with the problems is not the original one)? iTunes was deleted and reinstalled last night with the help of Apple's phone support, so it's new.
For the record, my 4th generation iPod updates fine with my library, with no error messages, and ejects as it should. I haven't tried it with the second library; I also haven't tried using the 5th generation iPod with a new library or my existing, original one.

Latest problem now with iTunes is that I can't connect to the iTunes store or update art work. Freezes up. Clearly they nerfed old iTunes to make us upgrade to an inferior version. So frustrating.

Determining volume/gapless playback freezes iTunes when using NAS

Similar Messages

Maybe you are looking for