Determining Which Transaction Launcher is used

Hi,
      I have a requirement to change a Standard Transaction Launcher. My question is how do I determine which Transaction launcher is being used?
     If you go to the following menu path: SPRO --> Customer Relationship Management -->UI Framework --> Technical Role Definition --> Transaction Launcher --> Copy/ Delete Launch Transactions, you will see many standard Transaction Launchers already defined. See screen shot below:
   The question is this: I am at the Standard order screen in SAP CRM CIC. There are numerous hyperlinks at the "Transaction History" tab that launch various Transaction Launchers (launching different Transactions-parameters), how do I determine which Transaction Launcher is being used for each hyperlink?
      See the screen shot below of the Transaction Launcher (hyperlinks). I need to find the Transaction Launcher that is used in these hyperlinks (I know it is not the same Transaction Launcher for all because each launches a different transaction in ECC). How do I do this?
   Thanks for your help in advance.

Hello,
Go to class CL_UICMP_LT_ABOXEXECUTION_IMPL, put debuger in method IP_INBOUNDPLUG( )
once the transaction launchr is executed me->handler will give the information you want.
GV_ID indicate the LTX id. Hope it helps,
Regards,
Ashik

Similar Messages

What is a customizing object? Which transaction do I use to edit one!!!!

What is a customizing object? Which transaction do I use to edit one!!!!

Hi
Before customers can run an R/3 System, several system parameters must be set in Customizing for the applications. The settings of application objects form one business unit. It makes sense to maintain the relevant parameters in a single step. To do this, you use transaction SOBJ to define Customizing objects. Although the parameters of these objects may be distributed among many database tables, they can easily be maintained using maintenance views. To make usage of these maintenance views consistent, a standardized table maintenance transaction is available. This transaction is called Extended Table Maintenance ( SM30 ).
To ensure that you can make the settings in a structured way, IMG activities are provided that take you to extended table maintenance. To do this, the system calls a parameterized transaction that starts the table maintenance transaction.
Transaction OY01 (change country global parameters) starts transaction SM30 with maintenance view V_T005 . This Customizing object does not have an address.
Many Customizing objects have an address which is maintained together with the other settings. These addresses are also called Customizing addresses.
Hope this`ll give you some help .
Thanks
Customizing object Change plants (transaction OX10 ) has an address and uses maintenance view V_T001W .

How can I determine which programs/files are using disc space?

A question for the professionals:
What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it. Thank you in advance to any helpful solutions.
Matthew

activity monitor for RAM (its already in your utilities folder) http://support.apple.com/kb/HT1342. OmniDiscSweeper for hard drive http://www.omnigroup.com/products/omnidisksweeper/ (needs to be downloaded)

SharePoint Databases - How to determine which ones are being used and which ones aren't

I am not sure where to exactly post this question. On the SQL Server side or on a SharePoint side.
I am a SQL Server Database Administrator who is monitoring some SharePoint databases. On a daily basis it seems that they are creating new databases but don't delete the databases that they are no longer using. For example, they might be testing
on a development server and if things aren't working properly instead of asking that the databases be deleted they just go ahead and create new databases to do what ever they need to do. Is there a way on the SQL Server side to determine which SharePoint
databases are being used and which ones aren't being used? Or does one determine this information through the SharePoint Central Administration console?
lcerni

Hello,
The following query gives you the databases now in use.
SELECT
DISTINCT d.name
FROM
sys.dm_tran_locks
tl INNER
JOIN sys.databases
d
ON
tl.resource_database_id
= d.database_id
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to determine which configuration is being used within a page/view?.

If I click on the little cog icon to take me into the AET for a given assignment block, how do I know which configuration is being used?. Usually one is highlighted, but the case of the Accounts main address assignment block these details are not shown. As there probably 30 of them I though there must be a quick way to determine which is being used from within the view/page.
Anyone
Jas

Hi Jason, (great performance at the Transporter, but go easy on the steroids )
There are 2 ways to know that:
1. put your focus (not in the configuration mode) on one of the fields that are on the block. then press F2. Here you get a popup where there is the configuration searched for and the configuration found.
2. Within the configuration, when there is no configuration with the configuration key linked to your business role present, the system takes the <DEFAULT> one. there should at least one be highlighted, otherwise you get a dump NO_CONFIG_FOUND.
When you just press the copy button on the configurations tab, you get your configuration defaulted, this being, the configuration key linked to your business role + the search for component, usage, and subcomponent. here you see what was searched for.
Hopefully this helps you out a bit.
KR,
Micha
Edited by: Micha Van Nijen on Apr 20, 2010 3:03 PM
Edited by: Micha Van Nijen on Apr 20, 2010 3:07 PM

How to determine which adapter to be used in a scenario

Hi All,
I am new to XI and have some very basic knowledge about it.
I wish to know if I need to send data from a legacy(system A) to SAp (system B) how do I know what adapter to use. Should I use file, idoc ,JMS etc adapter.
Is there a specific guide which I can use to know which adapter should be used in which conditions.
Appreciate if you could guide me to some relavent weblog/steps.
Thanks
Shirin

Hi Shirin,
Before u start developing the objects in SAP-XI,kindly go through the below mentioned blogs which would definitely help u in the road ahead.These blogs are meant for the freshers to XI like u...
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
These would definitely give u a good start into the world of SAP-XI
Regards,
Lokesh
PS:Reward points if useful

Determining which NAC Agent to use for ISE

We are planning an upgrade to our ISE environment from 1.1.4 to 1.2. I have downloaded the agent that is recommended for 1.2 (NAC Agent 4.9.4.3) to begin testing with it. Unfortunately the first test I run is using that client against our ISE 1.1.4 servers. It doesn't work! It runs sporadically at best, taking up to 3 minutes to pop up and posture the system. Other times, I give up, after 20 minutes of waiting, and it never runs. This is quite a spot, I do not want to upgrade the ISE system to 1.2, then run into an issue and have to mass upgrade over 2000 clients all at once to get them running. My hope was to upgrade to the NAC Agent prior to the ISE upgrade but unfortunately that has been short circuited.
So my question is, has anyone run ISE 1.2 with NAC Agent 4.9.1.6? That is what we are currently using, as it runs well against both ISE 1.1.4, and NAC 4.9.1 (which is still used for our wired environment). We need to find an agent we can use to bridge us from the time we upgrade ISE to 1.2, and the time we bring our wired environment into the ISE fold and remove NAC appliance. I should note, ironically, that 4.9.4.3 NAC Agent runs flawlessly against the NAC 4.9.1 appliance. The issue is running that NAC Agent against ISE 1.1.4. That is ecactly the opposite of what I would have guessed! Please help!
Jeff

Yes sir, I am aware of that recommendation, however once I downloaded and started testing several clients with that version, none of them run well, if at all, against 1.1.4 which is the current production version we run in our environment. So I would have to either upgrade all 2000 clients immediately after we upgrade or ISE system to 1.2, or take a chance that our current agent (4.9.1.6) will run against ISE 1.2. I was hoping to find a recommendation of an agent version that runs well against both ISE 1.1.4 and ISE 1.2 so we could upgrade the clients at a controlled rate prior to upgrading ISE to 1.2

DW CS3 - How to determine which CSS stylesheet to use at runtime ?

I'm building a website that can be used by different
companies. I want to use CSS so that when a user from Company_123
logs in, then they see a website in the style of Company_123's
corporate colours. However if a user from Company_ABC logs in, then
they see a website in the style of Company_ABC's corporate colours.
The site will potentially be used by dozens of different
companies so if possible I'd rather avoid having to implement a
sort of multiple "if company = 123 use this CSS, if company = ABC
use this CSS, etc, etc" at the top of every single web page I
produce.
Whats the best way to implement this ?
As far as I can see, when I create a new external CSS in DW
CS3, there is nothing dynamic in its title that allows anything to
be determined at runtime ?
Thanks in advance........Gav.

Different sizes of what? If screens then it's a wasted
effort.... You can
know my screen size but you have no idea of my browser
viewport size.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"newlinp" <[email protected]> wrote in
message
news:fvsa5b$87o$[email protected]..
>I would suggest using a stylesheet switcher...
>
>
http://www.alistapart.com/stories/alternate/
>
> Ive used it at
http://churchillretirement.co.uk
website to switch CSS for
> different sizes - I reckon you could do much the same
here..
>

Determine which wifi network to use as default

How can I tell my ipad2 which available wifi network to use as the default?

I don't see that model number. Are you sure it's correct? If it is, it might not be a US model. This site only supports the US region.
- Peter

How to determine which fallback bundle was used?

Hello,
I have built a component that uses singleton factory classes to cache localized objects in that same factory. In the end the singleton factory either builds a new one or pulls from cache. The cached objects can be cached by keys like myObjectEN or myObjectENUS. If I use user locale to create these keys fallback situations are not handled properly. Example:
1.) I am only providing a _en bundle.
2.) A user who's locale is en generates an object twith en translations that us cached by key myObjectEN.
3.) A user who's locale is en_US falls back to en & generates an object with en translations that is cached by key myObjectENUS if I use the users locale, which isn't correct.
This results in the same object with english translations being cached twice by two different keys. I need my key to be drived from the resource bundle being used, and not the users locale, to cover fallback situations. Is there any way to do this?
Thanks!
Message was edited by:
DougSteckel

Thanks Marius.
The wdController.getApplication method doesn't exist, but if found that this did work:
wdComponentAPI.getApplication().getName()
thanks for send me off in the right direction.
Cheers,
faB
Message was edited by: faB

How to determine which Factory Calendar to use in BI - Help!

Hello,
Need some help? Any input would be much appreciated.
Basically I am creating a query in BI 7.0 based on Utilisation for a particular business Unit. However, I need to define or incorporate somewhere, to use the GB Factory Calendar.
I have done the normal SCAL maintenance and transferred Global settings from R/3. So all the Factory calendars have been transferred over. Our BI system is picking up the default factory Calendar as 'DE'.
How do I now tell BI I want to use specific Factory Calendar 'GB' (Great Britain) at ALL TIMES since this is the only one we will use.
Do we need to use a particular info object in query?
0CALMONTH to check working days as opposed to 0FISCPER
Many thanks in advance
Kuljit

Try tcode RSRHIERARCHYVIRT customizing setting - specify your factory calendar and check if it works.

How do I determine which Firmware version to use?

Should I upgrade? I have the WRT54G version 1.1 The current Firmware installed (reported after I log in with the web browser) is 4.30. How do I decide if I should stay with firmware 4.x or should I move up to 5.x or 6.x. Thanks for the help

use this link to upgrade the router's firmware ..

Possible to determine which FIFO layers used on an Invoice

Hi,
Is it possible to determine which FIFO layers were used when satisfying an invoice?
Thanks
Greig

The information regarding the FIFO cost price exists in the OINM
(Warehouse Journal) table under the fields Calculated Price and
Open Quantity.
check this if it helps :
SELECT T0.ItemCode FROM OINM T0 INNER JOIN OITM T1 ON T0.ItemCode = T1.ItemCode WHERE T0.CalcPrice = '0' and T1.EvalSystem ='F'
Regards,

Which transaction code may i use

Hi,
i have created a new sapscript form to print out but i dont know which transaction i will use to use my sapscript instead of the sap's standard form, i want to change the forms.
Thanks.

Very basic, please search for available information, also use correct sub-forum when posting again.
Thread locked.
Thomas

What determines which NLS_LANG registry key is used?

I have a vb application that uses the MSDAORA.1 OLEDB provider. I have the app and the Oracle 8i (8.1.7) driver client installed on two PC's. One PC the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\NLS_LANG (AMERICA_AMERICA.WE8ISO8859P1) key is used and the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0\NLS_LANG key is ignored. I know because if I change the value to "NA" or something else the app chokes with error ORA-12705 (invalid or unknown NLS parameter . . .). On the second PC the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0\NLS_LANG key is used, and the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\NLS_LANG is ignored. The Oracle client was installed a little differently on the two PC's one from the CD, and another from an MSI package that contains the Oracle client install. Both PC's only have one home which is HOME0. Both PC's have the same directory names and structures for the Oracle client. I compared the registry settings between the two PC's are they are essentially identical. Where is it determined which NLS_LANG key is used? And what is the purpose of the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\NLS_LANG key as opposed to the HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0\NLS_LANG key? Thanks, Brian Grear

see if this helps: http://www.uwgb.edu/compserv/ehelp/macos/Excel_Shortcuts_Mac.pdf

Determining Which Transaction Launcher is used

Similar Messages

Maybe you are looking for