Detialed log (about my error msg: service sapmsNSP time out)
Error:connection to host packadBell, service Sapd00 time out
release 46D
component:NI (network interface)
version 34
return code -12
module nixxi.C
détails niPconnect
counter 1
the description of the ID event(42) in the source (Sapgui) can't be find.the localhost
machine has not maybe the registry informations or the library required to screen(show) the message coming from a remote machine.
(I have setup a mini sap Basis system on my Lap.
when I try to logon with a user already created I got this error message
received a message from your sap system NSP
Error:connect to host packard Bell (name of my hostname laptop),service SapmsNSP time out
I have already fill system ID field =NSP
message server=packardBell (my hostname machine where Sap is installed)
Hi
Check if your sap system is up and running.
Make sure that you have also filled system number detail.
If you have already done it and still error persists send a detialed log
Reward points if usefull
Similar Messages
-
Error : 907 invalid COD time out
Hello, kindly assist me, I like to download series via my browser but lately I cant download when I do it will give me error: 907 invalid COD time out. I use a blackberry curve 7 9320. I cant even use my blackberry world. Please I need help and I have enough Data on my fone to download. Also I use MTN network. Thank you.
Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Hi,
I am trying to establish connectivity between OBIEE 11g to Teradata DB 13.10.6.1. obiee running on Linux OS 64bit. i installed Teradata odbc drivers 13.10.0.10 .. when i try to access data from obiee online i am getting error msg "Not enough information to log on." error
Per the documentation i configured odbc.ini and user.sh . (ld_library_path).. ODBCini parameter also set.
The teradata connection working ok when i ran a sample program .. /opt/teradta/client/13.10/odbc_64/samples/C++.. exceuted ./adhoc and i am able to connect using same datasource name/credentials that listed in odbc.ini.
any thing i am missing in Teradata config side?.. or obiee config side.. and troubleshooting/trace advice?... Thanks for your help
Kashhttp://www.symantec.com/security_response/writeup.jsp?docid=2010-011922-0125-99& tabid=2
The story goes on. I am sharing this with other users for information only based on my experience with the product. I've owned a MAC since they were first introduced in 1984 and have used Norton for years. If the virus Bloodhound was real, and not just a false heuristic positive (which is totally possible) it came in on the heels of my downloading a free PDF OCR X (before reinstalling the updated version of Norton for 10.8.3) and using it to convert .jpgs > PDF OCR X text >MS Word > Adobe .pdf as that virus (Bloodhound.PDF.20 is known for exploiting weaknesses in Acrobat and Adobe .pdfs). I have never been happy having to use the MS Office suite of office products for MAC, but EXCEL on a PC is only compatibile with EXCEL on a MAC.
When I got the Bloodhound warning after running a quick scan, I ran a full scan (1,050,660 files) with the same result. I looked at my terminal - nothing happening. I called Norton, who in turn convinced me to purchase an $89.98 subscription + $19.95/month for their spyware and virus removal service (the same sales pitch I've heard from other security providers who sell services through panic). The tech, who said it was probably false, played around with my computer via remote login, and then signed off, saying everything was okay. I reran a full scan and there was the virus again. Called tech support again. Finally got the virus quarantined and tossed it. The reality is that there was a 50/50 chance that it was something because of the way MS Word was behaving when I tried to save the file created from the ocr'd jpgs (error message: disk full- when I have 250GB of free disk space). I had to resave the files with a different name and place them in alternating folders. That havoc is now gone, but I will not be keeping the subscription. Just FYI. -
About Sun Fire E25K I2c read time out error
Hi,
Can anybody give me a breif explaination about the following errors
which capatured by Sun Fire E25K System Controller:
Nov 7 08:16:36 2006 E25K-ORADR-sc0 hwad[11914]: [1123
20621355893934396 ERR I2cComm.cc 410] I2c read time out - bus: 10,
address: 21
Nov 7 08:16:36 2006 E25K-ORADR-sc0 hwad[11914]: [1128
20621356152372741 ERR SelectPll.cc 292] Reading bus failed in address
0, ecode=1123
Nov 7 18:45:40 2006 E25K-ORADR-sc0 hwad[11914]: [1123
20659099583593289 ERR I2cComm.cc 410] I2c read time out - bus: 10,
address: 21
Nov 7 18:45:40 2006 E25K-ORADR-sc0 hwad[11914]: [1128
20659099584735868 ERR SelectPll.cc 138] Reading bus failed in address
0, ecode=1123
Nov 8 02:15:01 2006 E25K-ORADR-sc0 hwad[11914]: [1124
20686060070434628 ERR I2cComm.cc 1095] I2c write time out - bus: 10,
address: 21
Nov 8 02:15:01 2006 E25K-ORADR-sc0 hwad[11914]: [1129
20686060083304777 ERR SelectPll.cc 181] Writing bus failed in address
0, ecode=1124
What is the reason to cause "I2c read time out" ?
TIA.
Rgds,
SimonHello Simon,
these forums are user-to-user. The Fire E25K is definetely beyond the scope of these forums (too expensive, too critical for your business, too complex).
This system should be under Spectrum coverage (Platinum/Gold).
Open a service case !
Let's if you get any response to your posting on the Sun Managers mailing list.
Michael
Message was edited by:
MAALATFT -
While updating i receive error msg saying connection timed out?
i receive an error msg while updating versions, ( Network connection timed out ) i never had any troubles with my connection!! whats the solution:(
plz email me at [email protected]I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option. -
My Intel iMac with 4 ext daisy chained drives freezes up sometimes. If I unplug all drives there is no problem. Also Disk Warrior gives me the error msg (2154) that in Time Machine, (which is on a lg.(1TB ext. HD only 1/4 used space) error msg me that there is not enough memory. I am using Lion 10.7.2.
My Intel iMac with 4 ext daisy chained drives freezes up sometimes. If I unplug all drives there is no problem. Also Disk Warrior gives me the error msg (2154) that in Time Machine, (which is on a lg.(1TB ext. HD only 1/4 used space) error msg me that there is not enough memory. I am using Lion 10.7.2.
-
whenever i tried to update my iphone through itunes it gives the server connection time out error and i am unable to update my software throught the iphone
Hello ujl,
The articles linked below provides steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
Sun corba service set time out
Hi im coding a corba client service using sun default library(without using any 3rd lib. e.g jacorb /visibroker). Is there anyway to set client timeout. This is to solve when server is down then my client won't hog the thread and keep the connection active. As of now if the host is down, i will wait forever, the timeout from sun is very unconsistence
Thanks a lot for your reply, I guess im kinda confusing. Maybe you can help me and enlighten me a bit. my problem here is i need to set timeout. With weblogic default timeout. THe time out is actually not consistence, from 0- 50 minute.
below is my snippet of code.
If im not setting any properties or system variable then the system will run default
code set 1.
myOrb = org.omg.CORBA.ORB.init(args, null);
System.out.println("After System org.omg.CORBA.ORBClass:"+System.getProperty("org.omg.CORBA.ORBClass"));
System.out.println("After System org.omg.CORBA.ORBSingletonClass:"+System.getProperty("org.omg.CORBA.ORBSingletonClass"));
-- print line result.
After System org.omg.CORBA.ORBClass:weblogic.corba.orb.ORB
After System org.omg.CORBA.ORBSingletonClass:weblogic.corba.orb.ORB
it still print weblogic.
code set 2.
Properties prop = new Properties();
prop.put("org.omg.CORBA.ORBClass", "com.sun.corba.se.impl.orb.ORBImpl");
prop.put("org.omg.CORBA.ORBSingletonClass", "com.sun.corba.se.impl.orb.ORBSingleton");
//prop.put("com.sun.CORBA.transport.ORBTCPReadTimeouts);
myOrb = org.omg.CORBA.ORB.init(args, prop);
-- print line result.
After System org.omg.CORBA.ORBClass:weblogic.corba.orb.ORB
After System org.omg.CORBA.ORBSingletonClass:weblogic.corba.orb.ORB -
Mail Services connection times out after 10.5.8 - 10.6.4 upgrade
I have been running a mail server on my macosxserver02.binghamton.edu (128.226.xx.x) for Podcast Producer email notifications only. The mail service has been running fine until I recently upgraded the server to Apple's latest server software: Snow Leopard Server (10.6.4).
After the upgrade I'm no longer able to receive mail to the mail server from outside it's domain (macosxserver02.binghamton.edu). I can send and receive mail locally from within that domain. I can send mail outside of the domain without any trouble to my personal email account [email protected], but not my work account: [email protected]. If I try to send from outside the domain -- say with my Binghamton Univ account -- the mail bounces back with this message:
Delivery to the following recipient has been delayed:
[email protected]
Message will be retried for 2 more day(s)
Technical details of temporary failure:
The recipient server did not accept our requests to connect. Learn more at http://mail.google.com/support/bin/answer.py?answer=7720
[macosxserver02.binghamton.edu (1): Connection timed out]
---- Original message -----
Received: by 10.224.102.202 with SMTP id h10mr6012071qao.49.1277903965341;
Wed, 30 Jun 2010 06:19:25 -0700 (PDT)
Return-Path: <[email protected]>
Received: from [128.226.62.7] ([128.226.62.7])
by mx.google.com with ESMTPS id v20sm41975621qce.46.2010.06.30.06.19.24
(version=TLSv1/SSLv3 cipher=RC4-MD5);
Wed, 30 Jun 2010 06:19:24 -0700 (PDT)
From: Cheryl Tarbox <[email protected]>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Subject: another attempt
Date: Wed, 30 Jun 2010 09:19:22 -0400
Message-Id: <[email protected]>
To: [email protected],
[email protected]
Mime-Version: 1.0 (Apple Message framework v1078)
X-Mailer: Apple Mail (2.1078)
One thing to note about the .binghamton.edu domain is that we recently switched to Google Mail and .binghamton.edu is our branded domain within google.com.
DNS is managed on another server. I had an MX record added to my server this morning.
I have these ports open on my firewall: 143, 993, 25, 587 (POP is not enabled)
In ServerAdmin>Mail>Settings>Relay 'Accept SMTP relays only from these hosts and networks' is checked with
127.0.0.0/8
128.226.62.0/26 (my local subnet)
In ServerAdmin>Mail>Settings>Filters Junk Mail and Virus filtering is not enabled, so greylisting should not be a problem. I did confirm this line in main.cf: smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reje ct_unauth_destination permit
10MB quota is set, Mailing Lists not enabled, Logging set at Information
In ServerAdmin>Mail>Settings>Advanced>Security I am not using SSL. I do have a valid certificate that I would like to use after I get this back up and running.
In ServerAdmin>Mail>Settings>Hosting 'Include server's domain as local host alias' is checked with
localhost
binghamton.edu
Virtual hosting is not enabled.
Here is the output of: postconf -n:
macosxserver02:~ academic$ postconf -n
2bounce_notice_recipient = postmaster
access_map_reject_code = 554
address_verify_default_transport = $default_transport
address_verify_local_transport = $local_transport
address_verify_map =
address_verify_negative_cache = yes
address_verify_negative_expire_time = 3d
address_verify_negative_refresh_time = 3h
address_verify_poll_count = 3
address_verify_poll_delay = 3s
address_verify_positive_expire_time = 31d
address_verify_positive_refresh_time = 7d
address_verify_relay_transport = $relay_transport
address_verify_relayhost = $relayhost
address_verify_sender = $double_bounce_sender
address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
address_verify_service_name = verify
address_verify_transport_maps = $transport_maps
address_verify_virtual_transport = $virtual_transport
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
allow_mail_to_commands = alias, forward
allow_mail_to_files = alias, forward
always_bcc =
anvil_rate_time_unit = 60s
anvil_status_update_time = 600s
application_event_drain_time = 100s
authorized_flush_users = static:anyone
authorized_mailq_users = static:anyone
authorized_submit_users = static:anyone
backwards_bounce_logfile_compatibility = yes
berkeley_db_create_buffer_size = 16777216
berkeley_db_read_buffer_size = 131072
best_mx_transport =
body_checks_size_limit = 51200
bounce_notice_recipient = postmaster
bounce_queue_lifetime = 5d
bounce_service_name = bounce
bounce_size_limit = 50000
bounce_template_file =
canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
check_for_od_forward = yes
cleanup_service_name = cleanup
command_directory = /usr/sbin
command_execution_directory =
command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
command_time_limit = 1000s
config_directory = /etc/postfix
connection_cache_protocol_timeout = 5s
connection_cache_service_name = scache
connection_cache_status_update_time = 600s
connection_cache_ttl_limit = 2s
content_filter =
cyrus_sasl_config_path =
daemon_directory = /usr/libexec/postfix
daemon_timeout = 18000s
data_directory = /var/lib/postfix
debug_peer_level = 2
debug_peer_list =
default_database_type = hash
default_delivery_slot_cost = 5
default_delivery_slot_discount = 50
default_delivery_slot_loan = 3
default_destination_concurrency_failed_cohort_limit = 1
default_destination_concurrency_limit = 20
default_destination_concurrency_negative_feedback = 1
default_destination_concurrency_positive_feedback = 1
default_destination_rate_delay = 0s
default_destination_recipient_limit = 50
default_extra_recipient_limit = 1000
default_minimum_delivery_slots = 3
default_privs = nobody
default_process_limit = 100
default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
default_recipient_limit = 20000
default_recipient_refill_delay = 5s
default_recipient_refill_limit = 100
default_transport = smtp
default_verp_delimiters = +=
defer_code = 450
defer_service_name = defer
defer_transports =
delay_logging_resolution_limit = 2
delay_notice_recipient = postmaster
delay_warning_time = 0h
deliver_lock_attempts = 20
deliver_lock_delay = 1s
destination_concurrency_feedback_debug = no
detect_8bit_encoding_header = yes
dont_remove = 0
double_bounce_sender = double-bounce
duplicate_filter_limit = 1000
empty_address_recipient = MAILER-DAEMON
empty_address_relayhost_maps_lookup_key =
enable_original_recipient = yes
enable_server_options = yes
error_notice_recipient = postmaster
error_service_name = error
execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
export_environment = TZ MAIL_CONFIG LANG
fallback_transport =
fallback_transport_maps =
fast_flush_domains = $relay_domains
fast_flush_purge_time = 7d
fast_flush_refresh_time = 12h
fault_injection_code = 0
flush_service_name = flush
fork_attempts = 5
fork_delay = 1s
forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
frozen_delivered_to = yes
hash_queue_depth = 1
hash_queue_names = deferred,defer
header_address_token_limit = 10240
header_checks =
header_size_limit = 102400
hopcount_limit = 50
html_directory = no
import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
in_flow_delay = 1s
inet_interfaces = all
inet_protocols = ipv4
initial_destination_concurrency = 5
internal_mail_filter_classes =
invalid_hostname_reject_code = 501
ipc_idle = 5s
ipc_timeout = 3600s
ipc_ttl = 1000s
line_length_limit = 2048
lmtp_bind_address =
lmtp_bind_address6 =
lmtp_body_checks =
lmtp_cname_overrides_servername = no
lmtp_connect_timeout = 0s
lmtp_connection_cache_destinations =
lmtp_connection_cache_on_demand = yes
lmtp_connection_cache_time_limit = 2s
lmtp_connection_reuse_time_limit = 300s
lmtp_data_done_timeout = 600s
lmtp_data_init_timeout = 120s
lmtp_data_xfer_timeout = 180s
lmtp_defer_if_no_mx_address_found = no
lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
lmtp_destination_rate_delay = $default_destination_rate_delay
lmtp_destination_recipient_limit = $default_destination_recipient_limit
lmtp_discard_lhlo_keyword_address_maps =
lmtp_discard_lhlo_keywords =
lmtp_enforce_tls = no
lmtp_generic_maps =
lmtp_header_checks =
lmtp_host_lookup = dns
lmtp_initial_destination_concurrency = $initial_destination_concurrency
lmtp_lhlo_name = $myhostname
lmtp_lhlo_timeout = 300s
lmtp_line_length_limit = 990
lmtp_mail_timeout = 300s
lmtp_mime_header_checks =
lmtp_mx_address_limit = 5
lmtp_mx_session_limit = 2
lmtp_nested_header_checks =
lmtp_pix_workaround_delay_time = 10s
lmtp_pix_workaround_maps =
lmtp_pix_workaround_threshold_time = 500s
lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
lmtp_quit_timeout = 300s
lmtp_quote_rfc821_envelope = yes
lmtp_randomize_addresses = yes
lmtp_rcpt_timeout = 300s
lmtp_rset_timeout = 20s
lmtp_sasl_auth_cache_name =
lmtp_sasl_auth_cache_time = 90d
lmtp_sasl_auth_soft_bounce = yes
lmtp_sasl_mechanism_filter =
lmtp_sasl_path =
lmtp_sasl_security_options = noplaintext, noanonymous
lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
lmtp_sasl_type = cyrus
lmtp_send_xforward_command = no
lmtp_sender_dependent_authentication = no
lmtp_skip_5xx_greeting = yes
lmtp_starttls_timeout = 300s
lmtp_tcp_port = 24
lmtp_tls_CAfile =
lmtp_tls_CApath =
lmtp_tls_cert_file =
lmtp_tls_dcert_file =
lmtp_tls_dkey_file = $lmtp_tls_dcert_file
lmtp_tls_enforce_peername = yes
lmtp_tls_exclude_ciphers =
lmtp_tls_fingerprint_cert_match =
lmtp_tls_fingerprint_digest = md5
lmtp_tls_key_file = $lmtp_tls_cert_file
lmtp_tls_loglevel = 0
lmtp_tls_mandatory_ciphers = medium
lmtp_tls_mandatory_exclude_ciphers =
lmtp_tls_mandatory_protocols = SSLv3, TLSv1
lmtp_tls_note_starttls_offer = no
lmtp_tls_per_site =
lmtp_tls_policy_maps =
lmtp_tls_scert_verifydepth = 9
lmtp_tls_secure_cert_match = nexthop
lmtp_tls_security_level =
lmtp_tls_session_cache_database =
lmtp_tls_session_cache_timeout = 3600s
lmtp_tls_verify_cert_match = hostname
lmtp_use_tls = no
lmtp_xforward_timeout = 300s
local_command_shell =
local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
local_destination_concurrency_limit = 2
local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
local_destination_rate_delay = $default_destination_rate_delay
local_destination_recipient_limit = 1
local_header_rewrite_clients = permit_inet_interfaces
local_initial_destination_concurrency = $initial_destination_concurrency
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_transport = local:$myhostname
luser_relay = pcastadmin
mail_name = Postfix
mail_owner = _postfix
mail_release_date = 20080902
mail_spool_directory = /var/mail
mail_version = 2.5.5
mailbox_command =
mailbox_command_maps =
mailbox_delivery_lock = flock, dotlock
mailbox_size_limit = 0
mailbox_transport = dovecot
mailbox_transport_maps =
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maps_rbl_reject_code = 554
masquerade_classes = envelope_sender, header_sender, header_recipient
masquerade_domains =
masquerade_exceptions =
max_idle = 100s
max_use = 100
maximal_backoff_time = 4000s
maximal_queue_lifetime = 5d
message_reject_characters =
message_size_limit = 10485760
message_strip_characters =
milter_command_timeout = 30s
milter_connect_macros = j {daemon_name} v
milter_connect_timeout = 30s
milter_content_timeout = 300s
milter_data_macros = i
milter_default_action = tempfail
milter_end_of_data_macros = i
milter_end_of_header_macros = i
milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
milter_macro_daemon_name = $myhostname
milter_macro_v = $mail_name $mail_version
milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr}
milter_protocol = 2
milter_rcpt_macros = i {rcpt_addr}
milter_unknown_command_macros =
mime_boundary_length_limit = 2048
mime_header_checks = $header_checks
mime_nesting_limit = 100
minimal_backoff_time = 300s
multi_recipient_bounce_reject_code = 550
mydestination = $myhostname, localhost.$mydomain, localhost, binghamton.edu, $mydomain
mydomain = binghamton.edu
mydomain_fallback = localhost
myhostname = macosxserver02.binghamton.edu
mynetworks = 127.0.0.0/8,128.226.62.0/26
mynetworks_style = subnet
myorigin = $myhostname
nested_header_checks = $header_checks
newaliases_path = /usr/bin/newaliases
non_fqdn_reject_code = 504
non_smtpd_milters =
notify_classes = resource, software
parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
permit_mx_backup_networks =
pickup_service_name = pickup
plaintext_reject_code = 450
prepend_delivered_header = command, file, forward
process_id_directory = pid
propagate_unmatched_extensions = canonical, virtual
proxy_interfaces =
proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
qmgr_clog_warn_time = 300s
qmgr_fudge_factor = 100
qmgr_message_active_limit = 20000
qmgr_message_recipient_limit = 20000
qmgr_message_recipient_minimum = 10
qmqpd_authorized_clients =
qmqpd_client_port_logging = no
qmqpd_error_delay = 1s
qmqpd_timeout = 300s
queue_directory = /private/var/spool/postfix
queue_file_attribute_count_limit = 100
queue_minfree = 0
queue_run_delay = 300s
queue_service_name = qmgr
rbl_reply_maps =
readme_directory = /usr/share/doc/postfix
receive_override_options =
recipient_bcc_maps =
recipient_canonical_classes = envelope_recipient, header_recipient
reject_code = 554
relay_clientcerts =
relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
relay_destination_concurrency_limit = $default_destination_concurrency_limit
relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
relay_destination_rate_delay = $default_destination_rate_delay
relay_destination_recipient_limit = $default_destination_recipient_limit
relay_domains = $mydestination
relay_domains_reject_code = 554
relay_initial_destination_concurrency = $initial_destination_concurrency
relay_recipient_maps =
relay_transport = relay
relayhost =
relocated_maps =
remote_header_rewrite_domain =
resolve_null_domain = no
resolve_numeric_domain = no
rewrite_service_name = rewrite
sample_directory = /usr/share/doc/postfix/examples
send_cyrus_sasl_authzid = no
sender_bcc_maps =
sender_canonical_classes = envelope_sender, header_sender
sender_canonical_maps =
sender_dependent_relayhost_maps =
sendmail_path = /usr/sbin/sendmail
service_throttle_time = 60s
setgid_group = _postdrop
showq_service_name = showq
smtp_bind_address6 =
smtp_body_checks =
smtp_cname_overrides_servername = no
smtp_connect_timeout = 30s
smtp_connection_cache_destinations =
smtp_connection_cache_on_demand = yes
smtp_connection_cache_time_limit = 2s
smtp_connection_reuse_time_limit = 300s
smtp_data_done_timeout = 600s
smtp_data_init_timeout = 120s
smtp_data_xfer_timeout = 180s
smtp_defer_if_no_mx_address_found = no
smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
smtp_destination_concurrency_limit = $default_destination_concurrency_limit
smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
smtp_destination_rate_delay = $default_destination_rate_delay
smtp_destination_recipient_limit = $default_destination_recipient_limit
smtp_discard_ehlo_keyword_address_maps =
smtp_discard_ehlo_keywords =
smtp_enforce_tls = no
smtp_fallback_relay = $fallback_relay
smtp_generic_maps =
smtp_header_checks =
smtp_helo_name = $myhostname
smtp_helo_timeout = 300s
smtp_host_lookup = dns
smtp_initial_destination_concurrency = $initial_destination_concurrency
smtp_line_length_limit = 990
smtp_mail_timeout = 300s
smtp_mime_header_checks =
smtp_mx_address_limit = 5
smtp_mx_session_limit = 2
smtp_nested_header_checks =
smtp_pix_workaround_delay_time = 10s
smtp_pix_workaround_maps =
smtp_pix_workaround_threshold_time = 500s
smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
smtp_quit_timeout = 300s
smtp_quote_rfc821_envelope = yes
smtp_rcpt_timeout = 300s
smtp_rset_timeout = 20s
smtp_sasl_auth_cache_name =
smtp_sasl_auth_cache_time = 90d
smtp_sasl_auth_soft_bounce = yes
smtp_sasl_mechanism_filter =
smtp_sasl_password_maps =
smtp_sasl_path =
smtp_sasl_security_options = noplaintext, noanonymous
smtp_sasl_tls_security_options = $smtp_sasl_security_options
smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
smtp_sasl_type = cyrus
smtp_send_xforward_command = no
smtp_sender_dependent_authentication = no
smtp_starttls_timeout = 300s
smtp_tls_CAfile =
smtp_tls_CApath =
smtp_tls_cert_file =
smtp_tls_dcert_file =
smtp_tls_dkey_file = $smtp_tls_dcert_file
smtp_tls_enforce_peername = yes
smtp_tls_exclude_ciphers =
smtp_tls_fingerprint_cert_match =
smtp_tls_fingerprint_digest = md5
smtp_tls_key_file = $smtp_tls_cert_file
smtp_tls_loglevel = 0
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers =
smtp_tls_mandatory_protocols = SSLv3, TLSv1
smtp_tls_note_starttls_offer = no
smtp_tls_per_site =
smtp_tls_policy_maps =
smtp_tls_scert_verifydepth = 9
smtp_tls_secure_cert_match = nexthop, dot-nexthop
smtp_tls_security_level =
smtp_tls_session_cache_database =
smtp_tls_session_cache_timeout = 3600s
smtp_tls_verify_cert_match = hostname
smtp_use_tls = no
smtp_xforward_timeout = 300s
smtpd_authorized_verp_clients = $authorized_verp_clients
smtpd_authorized_xclient_hosts =
smtpd_authorized_xforward_hosts =
smtpd_banner = $myhostname ESMTP $mail_name
smtpd_client_connection_count_limit = 50
smtpd_client_connection_rate_limit = 0
smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
smtpd_client_message_rate_limit = 0
smtpd_client_new_tls_session_rate_limit = 0
smtpd_client_port_logging = no
smtpd_client_recipient_rate_limit = 0
smtpd_client_restrictions =
smtpd_data_restrictions =
smtpd_delay_open_until_valid_rcpt = yes
smtpd_discard_ehlo_keyword_address_maps =
smtpd_discard_ehlo_keywords =
smtpd_end_of_data_restrictions =
smtpd_enforce_tls = no
smtpd_error_sleep_time = 1s
smtpd_etrn_restrictions =
smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
smtpd_forbidden_commands = CONNECT GET POST
smtpd_hard_error_limit = 20
smtpd_helo_required = no
smtpd_helo_restrictions =
smtpd_history_flush_threshold = 100
smtpd_junk_command_limit = 100
smtpd_milters =
smtpd_noop_commands =
smtpd_null_access_lookup_key =
smtpd_peername_lookup = yes
smtpd_policy_service_max_idle = 300s
smtpd_policy_service_max_ttl = 1000s
smtpd_policy_service_timeout = 100s
smtpd_proxy_ehlo = $myhostname
smtpd_proxy_filter =
smtpd_proxy_timeout = 100s
smtpd_pw_server_security_options = login,plain
smtpd_recipient_limit = 1000
smtpd_recipient_overshoot_limit = 1000
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination permit
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = no
smtpd_restriction_classes =
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_exceptions_networks =
smtpd_sasl_path = smtpd
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = cyrus
smtpd_sender_login_maps =
smtpd_sender_restrictions =
smtpd_soft_error_limit = 10
smtpd_starttls_timeout = 300s
smtpd_timeout = 300s
smtpd_tls_CAfile = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cha in.pem
smtpd_tls_CApath =
smtpd_tls_always_issue_session_ids = yes
smtpd_tls_ask_ccert = no
smtpd_tls_auth_only = no
smtpd_tls_ccert_verifydepth = 9
smtpd_tls_cert_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.cer t.pem
smtpd_tls_dcert_file =
smtpd_tls_dh1024_param_file =
smtpd_tls_dh512_param_file =
smtpd_tls_dkey_file = $smtpd_tls_dcert_file
smtpd_tls_exclude_ciphers =
smtpd_tls_fingerprint_digest = md5
smtpd_tls_key_file = /etc/certificates/*.binghamton.edu.1C15A00CCD190A0295A8587B951BA187BFD560ED.key .pem
smtpd_tls_loglevel = 0
smtpd_tls_mandatory_ciphers = medium
smtpd_tls_mandatory_exclude_ciphers =
smtpd_tls_mandatory_protocols = SSLv3, TLSv1
smtpd_tls_received_header = no
smtpd_tls_req_ccert = no
smtpd_tls_security_level =
smtpd_tls_session_cache_database =
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_wrappermode = no
smtpd_use_pw_server = yes
smtpd_use_tls = no
stale_lock_time = 500s
stress =
strict_mailbox_ownership = yes
syslog_facility = mail
syslog_name = postfix
tls_daemon_random_bytes = 32
tls_export_cipherlist = ALL:+RC4:@STRENGTH
tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
tls_null_cipherlist = eNULL:!aNULL
tls_random_bytes = 32
tls_random_exchange_name = ${data_directory}/prng_exch
tls_random_prng_update_period = 3600s
tls_random_reseed_period = 3600s
tls_random_source = dev:/dev/urandom
trace_service_name = trace
transport_maps =
transport_retry_time = 60s
trigger_timeout = 10s
undisclosed_recipients_header = To: undisclosed-recipients:;
unknown_address_reject_code = 450
unknown_client_reject_code = 450
unknown_hostname_reject_code = 450
unknown_local_recipient_reject_code = 550
unknown_relay_recipient_reject_code = 550
unknown_virtual_alias_reject_code = 550
unknown_virtual_mailbox_reject_code = 550
unverified_recipient_reject_code = 450
unverified_sender_reject_code = 450
use_getpwnam_ext = yes
use_od_delivery_path = no
verp_delimiter_filter = -=+
virtual_alias_domains = $virtual_alias_maps
virtual_alias_expansion_limit = 1000
virtual_alias_maps =
virtual_alias_recursion_limit = 1000
virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
virtual_destination_concurrency_limit = $default_destination_concurrency_limit
virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
virtual_destination_rate_delay = $default_destination_rate_delay
virtual_destination_recipient_limit = $default_destination_recipient_limit
virtual_gid_maps =
virtual_initial_destination_concurrency = $initial_destination_concurrency
virtual_mailbox_base =
virtual_mailbox_domains = $virtual_mailbox_maps
virtual_mailbox_limit = 51200000
virtual_mailbox_lock = fcntl, dotlock
virtual_mailbox_maps =
virtual_minimum_uid = 100
virtual_transport = virtual
virtual_uid_maps =
macosxserver02:~ academic$
Could someone please help me figure out what is wrong?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University
[email protected]I found two things that were causing my troubles.
First, port 25 on the switch going to the server was blocked. After this was opened I was able to receive mail to macosxserver02.binghamton.edu. Since this mail server is only used for Podcast Producer notifications, I'm hoping to have this port closed back down after I get Pcast Producer back up and running and fully tested.
Second, when the upgrade from 10.5 -> 10.6 was performed, in ServerAdmin>Mail>Settings>Domain Name, only the .binghamton.edu was populated in this field, not the full domain name of macosxserver02.binghamton.edu. This was preventing me sending mail to our Google branded .binghamton.edu email addresses. Apparently 10.6 was looking locally for all the .binghamton.edu email addresses.
A big thank you to Gordon for looking into this and helping me get this resolved.
Cheryl -
Aftr updating s/w - told to reinstall itunes. Error msg Service Apple Mobile Device failed to start. Vertify that you have suff privileges to start system services
Please give me some solution on above issue.....
-
How to get Error Msg from A step in TestStand into a variable (with Record Result disable)
I have disable "Record Result" in a step (action) that call a Labview VI (Minimise memory usage during long run).
But I want to capture the error msg and put it in a local variable (locals.log).
So in the "Post Expression" of that step, I add:
locals.log = step.result.error.msg
But it always an empty string, Is the post expression executed when the there is an error in the step ?
So How can I capture it ?Hi,
The trouble is that when a step errors, the Post Expression doesn't get executed.
Try using one of the Override callbacks - SequenceFilePostStepRuntimeError, ProcessModelPostStepRuntimeError or StationPostStepRuntimeError.
There is an example in the Examples\Callbacks.
The Step properties are passed as a parameter to the callback so you can get the error message and do your logging.
Hope this helps
Ray Farmer
Regards
Ray Farmer -
So I began having trouble connecting to the iTunes store with my computer about a month ago. It was working fine, I purchased and downloaded some music, and then the next day I got this message when I clicked on the iTunes Store: "We could not complete your iTunes Store request. An unknown error occurred (-50). There was an error in the iTunes Store. Please try again later."
Some basic facts about my computer:
Mac OS X 10.7.3, purchased in May '12.
iTunes is updated to the latest 10.6.3 version.
I have Sophos Anti-Virus (newly installed in the last two weeks).
No firewalls are set up.
Parental controls are not blocking anything (don't have them set up).
Internet connection is fine, no matter how I connect.
I did have an older version of iTunes (the previous version, so it wasn't that old) when the problem began, so I updated to the newest version hoping it would fix it; but it hasn't. I have checked the firewalls per apple community posts. I have checked the network connection. I only just put on an Anti-Virus (and the problem was pre-AV, so it shouldn't be that). I FINALLY figured out how to uninstall iTunes, and then I reinstalled it. The store still won't open, giving me the same message.
A little more research seems to show that the (-50) error is when it times out? But the message appears barely half a second after I click on the iTunes Store icon. It doesn't seem to even try; there isn't enough time to warrant a 'timing out'.
I am at a loss. At this point I am considering taking my computer in and telling them 'fix it, no matter what', but if I can avoid the hassle of being without my one and only computer for at LEAST a week, that would be great.
Does anyone have any ideas?!
Thank you and God bless!
MaryHi Laura-Wedders,
Thanks for visiting Apple Support Communities.
On August 7th, some users may have been unable to make purchases from the App Store, iTunes Store, Mac App Store, or iBookstore. Apple worked quickly to resolve these issues, however you may have experienced them.
To check the current status of these systems please see:
Apple - Support - System Status
http://www.apple.com/support/systemstatus/
If you are still experiencing issues, you may want to troubleshoot with the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
All the best,
Jeremy -
I went to REGEDIT and installed the DWORD key as suggested by ADOBE to fix problem created by security update & it did NOT work!! Attempting to save then open the files gives same error msg. I sent multiple emails from a book scanner at the library with pdf files in quick and searchable formats & neither will open! Someone else that I forwarded the email to was able to open with no problem & he is running version 10. There is no option to load earlier versions!!!! I am running version 11 on Windows XP.
I scanned hundreds of pages using a book scanner @ the law library - the USB port was not working so I had to choose the send by email attachment option. Received 30 emails & NONE (so far) of the pdf attachments will open - the error msg states "Reader could not open "doc" because it is either not a supported file or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)." I forwarded 2 emails to someone else running version 10 - he had no prob opening from email (I have version 11 & then I also reinstalled 9.5 & STILL getting the same error msg)! Used someone elses's computer who is running version 10 & same error msg. Each time I try a fix I then go to a 'new' unopened email & attempt to open an attachment that hasn't been previously downloaded. Adobe supposedly has a fix - from Regedit - create DWORD key @ HKCU/Adobe/Reader/11/AV General "bValidateBytesBeforeHeader" - I did that & restarted computer each time I installed etc - still NO solution! So unless you have another idea I have a THIRD 6 hour roundtrip to the Law Library in KC in my near future!
Drew Davis
Sent from my BlackBerry® powered by Virgin Mobile. -
Xmlviewservice.executeSQLQuery TIME OUT ERROR
Hello OBIEE Experts,
I got stucked with the command line xmlviewservice.executeSQLQuery(...) method of OBIEE as operation time out. Actuall i am writing dot net source code to retrive the xml result by passing the query created in Oracle BI Answer page. This method runs fine when running a very simple query returning only two rows. However when i set to use a query that takes around 10 min running in OBIEE answer section, the above method fails. It returns an error Operation Time out. I have even try setting sawservice & xmlviewservice timeout but no use.
Is there any way to handle sql execution time using OBIEE SAW web service functionality ? Please find below code that i have used.
Imports saw = Obiee_Services.web_Reference
Dim sawservice As New saw.SAWSessionService
Dim sessionid = sawservice.logon("xxx", "xxx")
sawservice.Timeout = 60000
'Dim curUser As String = sawservice.getCurUser(sessionid)
'Dim repref As New saw.ReportRef()
Dim xmlviewservice As New saw.XmlViewService
Dim xmlQueryExecutionOption As New saw.XMLQueryExecutionOptions
xmlQueryExecutionOption.maxRowsPerPage = 10
xmlQueryExecutionOption.refresh = True
Dim repid As String = "Report1"
Dim repParams As New saw.ReportParams
Dim repHtmlOP As New saw.ReportHTMLOptions
Dim QueryResult As New saw.QueryResults
xmlviewservice.Timeout = 60000
QueryResult = xmlviewservice.executeSQLQuery(qry, Obiee_Services.web_Reference.XMLQueryOutputFormat.SAWRowsetData, xmlQueryExecutionOption, sessionid)
Dim rstring As String = QueryResult.rowset
Dim i = WriteToFile("text.xml", rstring)
Regards,
Rajen SinghThank you for the reply.
I do agree that i have omitted logging out command line and WriteToFile() definition. The below executesqlquery command is a syncronous call. I do not think it will be a problem with the next two or three lines. Below mentioned command line will not be released by the compiler until and unless it is completed. MOreover i am sure that the two mentioned command line does not have to do much on the issue becouse the error message is associated with below line and also works fine on simple query.
QueryResult = xmlviewservice.executeSQLQuery(qry, Obiee_Services.web_Reference.XMLQueryOutputFormat.SAWRowsetData, xmlQueryExecutionOption, sessionid)
I have tested other work around to resolve the current error i.e "Operation Time Out" error atleast(applying other configuration setup and increasing timeout properties). Having resolved sucessfully the next issue is on the below line. Blank rowset is returned each time. I can get an ID on QueryResult.QueryId and QueryResult.Finished=false.
Dim rstring As String = QueryResult.rowset
Finally, in OBI Presentation Services, the query runs fine in a specific time. -
PERFORMANCE -TIME OUT ERROR (430) IN ESTABLISHING A DIALOGUE ASYNCHRONOUS
Hi all,
I have created a flow(program) and while executing the same program in the development server i am getting the desired output.
But when i execute the same program in the background mode (it fails in the foreground after 9 or 10 hrs giving the same error message) in the quality server, its giving time-out error 430 ( 00-430 TIME OUT IN ESTABLISHING A DIALOGUE ASYNCHRONOUS ).
Can someone explain me, what this error is all about.
It will be helpful,if you also teach me how to correct the same error.
NOTE : The DataBase tables being used in this program has fewer entries in the Development Server (in between 100 and 200 entries in each of the tables) whereas in the Quality server its much more (almost 3crore entries in each of the tables).
Regards,
YOGESH BABU K
Edited by: YogeshKS on Jun 13, 2011 11:37 AM
Edited by: YogeshKS on Jun 13, 2011 11:39 AMHi all,
I have created a flow(program) and while executing the same program in the development server i am getting the desired output.
But when i execute the same program in the background mode (it fails in the foreground after 9 or 10 hrs giving the same error message) in the quality server, its giving time-out error 430 ( 00-430 TIME OUT IN ESTABLISHING A DIALOGUE ASYNCHRONOUS ).
Can someone explain me, what this error is all about.
It will be helpful,if you also teach me how to correct the same error.
NOTE : The DataBase tables being used in this program has fewer entries in the Development Server (in between 100 and 200 entries in each of the tables) whereas in the Quality server its much more (almost 3crore entries in each of the tables).
Regards,
YOGESH BABU K
Edited by: YogeshKS on Jun 13, 2011 11:37 AM
Edited by: YogeshKS on Jun 13, 2011 11:39 AM
Maybe you are looking for
-
Crédito do PIS e COFINS do Ativo Imobilizado
Bom dia a todos! Terei que parametrizar um novo cenário onde a base de cálculo para crédito de PIS/COFINS nos IVA's de Ativo Imobilizado deverá ser formada excluindo o ICMS. Já tenho em mente as configurações que precisarei fazer no esquema de calcul
-
Hi everyone. I am working with a DB2 Data Base connected to PI 7.1, there is a standard Packed Data Type and I have to take it to PI to make some conversions on PI. Do someone know if there is a way to handle DB2 Packed Data Type on PI 7.1?? Thanks
-
I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.
-
Test ACS SE / Remote Agents
We are deploying two new ACS SE's using RA's talking to AD. These will be used for PEAP authentication of wireless users. I was wondering if there is an easy way to test user authentication so that I can verify the Remote Agent is talking properly to
-
We were able to get away from the .local domain with a new build of a .corp domain. I have placed only a dozen of Apples on the new domain for testing purposes. (Making sure everything is functioning correctly, before going global with the new domain