Detonator drivers displaying wrong memory amount

Richard was already helping me in another thread, but I decided to open a new one so more people can help me.
This is my problem: I recently bought a MSI GF4 Ti4200 128 MB card (MS-8870, VGA/DVI/S-Video outputs). I have uninstalled my previous card driver (a GF4 MX440) then powered down my system and replaced the old card with the new one. After booting, I've installed the MSI 41.07 drivers (from the website) and for my surprise, the nVidia tab on the Display Properties shows my card as a 64 MB one. Most weird, the MSI tab shows the correct amount of memory. After running Riva Tuner RC 12.2, I have received the following report:
$ffffffffff ---------------------------------------------------
$ffffffffff Northbridge information
$ffffffffff ---------------------------------------------------
$0400000000 Description : Intel i815 Solano
$0400000001 Vendor ID : 8086 (Intel)
$0400000002 Device ID : 1130
$0400000003 AGP bus : revision 2.0
$0400000004 AGP status : enabled
$0400000005 AGP rate : 1x 2x 4x supported, 4x selected
$0400000006 AGP SBA : supported, enabled
$0400000007 AGP FW : not supported
$ffffffffff ---------------------------------------------------
$ffffffffff Display adapter information
$ffffffffff ---------------------------------------------------
$0000000000 Description : NVIDIA GeForce4 Ti 4200
$0000000001 Vendor ID : 10de (NVIDIA)
$0000000002 Device ID : 0253
$0000000003 Location : bus 2, device 0, function 0
$0000000004 Bus type : AGP revision 2.0
$0000000005 AGP status : enabled
$0000000006 AGP rate : 1x 2x 4x supported, 4x selected
$0000000007 AGP SBA : supported, enabled
$0000000008 AGP FW : supported, disabled
$0000000009 Base address 0 : fd000000 (memory range)
$000000000a Base address 1 : e8000000 (memory range)
$000000000b Base address 2 : f4780000 (memory range)
$000000000c Base address 3 : none
$000000000d Base address 4 : none
$000000000e Base address 5 : none
$ffffffffff ---------------------------------------------------
$ffffffffff NVIDIA specific display adapter information
$ffffffffff ---------------------------------------------------
$0100000000 Graphics core : NV25 revision A3
$0100000001 Hardwired ID : 0253
$0100000002 Memory bus : 128-bit
$0100000003 Memory type : DDR (RAM configuration 0b)
$0100000004 Memory amount : 131072KB
$0100000005 Core clock : 249.750MHz
$0100000006 Memory clock : 249.750MHz (499.500MHz effective)
$0100000007 Reference clock : 27.000MHz
$0100000008 Maximum Fvco : 900.000MHz
$0100000009 Core PLL Fvco : 499.500MHz
$010000000a Memory PLL Fvco : 499.500MHz
I have already tried another drivers (MSI 30.00, nVidia 40.72 WHQL, nVidia 41.09 and nVidia 42.70) and the problem is still there. Then I decided to measure the voltages on my VGA memory chips and it's stable at 3.22 V (on idle and full load). The card performance itself is normal: I can play any game or watch to any DVD and it will play fine, no crashes, no blue screens, no slowdowns.
What may be happening here?
Some relevant information:
Processor: PIII 1.2 GHz Tualatin
Motherboard: Intel D815EFVU (chipset Intel 815, supports AGP 4x)
512 MB of NEC SyncMax PC133 RAM
PSU: Maxxtro PD500N (500W PSU, 24A on 3.3V rail, 35A on 5V rail and 18A on 12V rail)
OS: WinXP SP1 and Mandrake Linux 9.0

Just a note: you may find the memory clock weird, but I have overclocked it to its nominal capacity (the memory chips are 4 ns).

Similar Messages

  • AMD Radeon 6770M Displaying Wrong VRAM amount in Bootcamp

    Hi,
    I am an avid gamer and recently I have decided to install Windows 7 on my MacBook Pro (Late 2011) via BootCamp.
    Some of the games run natively on both OSx and Win7, so when I booted up a game on Windows and got significantly worse performance that I did on the Mac OSx side I was concerned.
    I then opened up DiaxDg to view my Display information and got the following;
    Card name: AMD Radeon HD 6770M
           Manufacturer: ATI Technologies Inc.
              Chip type: ATI display adapter (0x6740)
               DAC type: Internal DAC(400MHz)
             Device Key: Enum\PCI\VEN_1002&DEV_6740&SUBSYS_00F8106B&REV_00
        Display Memory: 707 MB
       Dedicated Memory: 1008 MB
          Shared Memory: 3795 MB
           Current Mode: 1680 x 1050 (32 bit) (60Hz)
    On OSx, if I go into about my mac then more details or whatever, it displays the correct 1g amount.
    My question really is this; is my graphics card performing badly/faulty or is it just not displaying the correct VRAM amount? If it is not displaying the correct amount, is this actually effecting performance or is the card functioning with 1g and the performance issues are all in my head?
    I am really clueless about this sort of thing.. Any help would be appreciated.

    You're probably seeing bad performance because you don't have the latest graphics drivers installed. The ones provided by Apple's Windows support software are long out of date. Going to AMD's main website and navigating to the download section won't get you the correct files. This is a direct link to the proper driver.
    http://www2.ati.com/DriverS/mobile/12-10_mobility_vista_win7_win8_64_dd_ccc_whql _net4.exe

  • IPad with retina displaying wrong memory usage amount

    I am using a 4th gen iPad, (iPad with retina and lighting port) and I have the 32gb with cellular version. Right now, my cellular is not active, but I'm with Telus, not sure if that matters. I'm running iOS 7.0.4. A few weeks ago, I realized I was running low on space, so I deleted a bunch of apps on my iPad, deleted tons of photos, etc. It said I had about 3gb of space available before I did that, but after, it only said I had about 6gb left. I have added up the memory usage of each app, and it only comes to about 13gb used, yet the usage says I have used up 21gb, and I only have about 6.5gb free. Even though I should have like 20gb free. I have turned my iPad on an off a few times with no change, I have restarted my iPad by holding down the home and power buttons, and still nothing. This is concerning me as to where this extra 8-9gb is being taken up. I should have a max capacity of 28gb, but my system says I am using up 21gb with 6gb free. Where as my math by adding up each apps usage only adds up to about 13gb or less. I have iTunes Match turned on, by my music app shows only 266mb used.
    Anybody else having this problem? Does anyone have a solution?

    Just a note: you may find the memory clock weird, but I have overclocked it to its nominal capacity (the memory chips are 4 ns).

  • PR05 - amount display wrong

    hi
    in transaction PR05 (travel), when my travel expense is in another currency eg. Ugandan Shilling, the 'amount' field displays wrong amount.  for eg:  if I enter my expense as 100, it displays as 10000 and if i enter 325.50, then it displays as 32550.  Can somebody tell me how to fix this issue.
    thanks.
    K

    hi Ashok,
    I checked SU3.  My default decimal notation is 1,234,456.89. But still this problem persists. 
    May be there is some kind of issue with the prorgram in RPRTEF00 - Travel Expenses standard form.  Does any one know any issue with this program that was doing similar amount display problem as I described.  Pl help.
    thanks
    K

  • Bug report : Navigator display wrong messages in package body

    Just run some code , you can see the Navigator display wrong messages in the package body,but the package work fine in sqlplus / toad or other tools.
    create or replace package SIMPLE AS
    Procedure simple_proc ;
    END;
    create or replace package body SIMPLE AS
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    END;
    Then open the package body in the Navigator (Connection Pane==> Connection Name ==> Packages ==> Simple Body ) , and show the error message:
    Unexpected token
    Missing Expression
    But if I just create the procedure out of the package , it work fine.
    CREATE OR REPLACE
    Procedure simple_proc
    IS
    v_tname varchar2(100);
    begin
    SELECT PERCENTILE_disc(0.5) WITHIN GROUP (ORDER BY tabtype DESC)
              INTO v_tname
              FROM tab;
    END simple_proc;
    /

    This has already been discussed a number of times (see http://forums.oracle.com/forums/search.jspa?objID=f260&q=Unexpected+token).
    As I understand it, it is related to the parser that SQL Developer is using to display the package decomposition in the navigator not coping with the full PL/SQL and SQL syntax (largely analytical functions from memory).

  • NVIDIA Detonator Drivers

    i was just wondering if it was safe to install NVIDIAs Detonator drivers on my MSI G4TI4200, this seems like a stupid question but i just want to make sure if i can use them or not before i try installing them.

    Hello,
    Thx for the replies.  Well I would like to keep the MSI tabs, but if had to could live with out them.  Although I for got about the VIVO and Duel display.  I run 2 monitors and one of the reasons I bought is card was for the VIVO.
    I see got one reply with no VIVO function and one with VIVO.  So guess I would like to know more about any problems you had getting it to work Denis.  Or if there was anything special you need to get to get the Nview, Dual Display and VIVO to work.  Correction on my video card I got, its a G4Ti-4200-VTD64.
    Thx for any info you can help with
    Scorp

  • Keyboard displays wrong character

    Hi,
             my notebook keyboard displays wrong character . MY keyboard language setting is correct .I have tried many solution but none of them works for me. also when i press some key it automatically goes to vairous section of my window.  what is the solution of it.??  thanks.

    @sraban 
    Have you tried a system restore to a point before the problem occured? That can help if there has since been a driver , update or other software installed, either by you, automatically, or by accident, that is the source of the problem.
    Using Microsoft System Restore (Windows 7)
    Here is the driver page for your notebook:  HP Pavilion 15-e034tx Notebook PC Drivers
    Did you try the things in that keyboard troubleshooting page I posted, and if so did you see any change or notice any errors?
    Also, for your convenience, see the: HP Pavilion 15 Notebook PC Maintenance and Service Guide
    With that you can find the part numbers and see instructions on how to remove or replace the keyboard if it is defective. Those same instructions can also help with cleaning.
    Let me know if that helps at all.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Is there a way to create a custom screensaver with pics/slides that display for different amounts of time?

    Is there a way to create a custom screensaver with pics/slides that display for different amounts of time? Or even add a "video slide" into the screensaver?
    My business has 3 TVs displayed in our lobby, each with its own apple TV and they are all linked to the same photo stream. Currently the Atv screensaver displays the photostream pictures of our products for the default 3 seconds. We just added pics/slides that now display messages and useful info for our customers but I want that info to be displayed for a longer period of time than the pictures to give people a chance to read it.
    I tried using flickr and powerpoint as a work around but no luck.  I created a slide in powerpoint with play length of 15 secs and saved it as a wmv file.  I added that file to a "screensaver" set in flickr and pointed the Atv screensaver to that flickr set.  It still displays everything, pics and the wmv file at the default 3 sec.
    I know I can increase the duration of all pics in the screensaver to display for longer but the goal is to have the pics display at 3 secs and the info slides to display at 15 secs.

    Welcome to the Apple Community.
    No that's not possible.
    If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here 

  • Error when modifying VM Memory - "Invalid minimum memory amount"

    Good day,
    I am trying to modify a virtual machine's static memory setting using VMM 2012 R2 with UR 2.  The VM is running on a Hyper-V 2012 R2 host cluster.  Whether I use the VMM GUI or attempt to issue the command via VMM Command Shell, I get the same
    result:
    PS C:\Windows\system32> $VM= Get-SCVirtualMachine -name "SomeVM"
    PS C:\Windows\system32> set-scvirtualmachine -VM $VM -MemoryMB 4096
    set-scvirtualmachine : VMM cannot complete the host operation on the hyperv.domain.com server because of the error: 'SomeVM' failed to modify device 'Memory'. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297)Invalid minimum memory amount assigned for 'SomeVM'. The minimum amount of memory you can assign to a virtual machine is '32' MB. (Virtual machine ID22AD6F9F-E5B6-4B8D-9AB6-6A48A9521297) (Error ID: 12700, Detailed Error:Unknown error (0x8005))
    Resolve the host issue and then try the operation again.
    To restart the job, run the following command:
    PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq"{8301e122-b69e-4ac0-82d7-82c473d99e3a}"})
    At line:1 char:1
    + set-scvirtualmachine -VM $VM -MemoryMB 4096
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~   
    + CategoryInfo          : ReadError: (:) [Set-SCVirtualMachine], CarmineEx   ception   
    + FullyQualifiedErrorId : 12700,Microsoft.SystemCenter.VirtualMachineManag   er.Cmdlets.SetVMCmdlet
    The error indicates that I am attempting to set the VM memory to something less than 32 MB, but as shown above I am actually trying to set it to 4096 MB.  I also get this error when I attempt to modify the value using Hyper-V Manager (or in this case
    the Failover Cluster Manager).  Note that I am not attempting to configure dynamic memory on this VM.
    One more note about this VM - it was migrated from a Hyper-V 2012 host cluster performed by exporting the VM from the old host, and importing it to the new one.
    Not sure if anyone else has experienced this error or if there is a work around.

    Really what the error is not telling you, is that you need to set the value for minimum memory in addition to the value you are setting.
    if dynamic memory is on, you need to set them all: 
    http://technet.microsoft.com/en-us/library/hh801341.aspx
    -MemoryMB<Int32>
    Specifies, in megabytes (MB), the amount of random access memory (RAM) on the host that is allocated to a virtual machine. The default value is 512 MB. For a virtual machine on which dynamic memory is enabled (on a host running Windows Server 2008 R2 SP1
    or later), use MemoryMB to specify the startup memory value.
    I have run into this issue what I had VMs that I migrated to Hyper-V 2012 R2, because the minimum was actually lower.  Or it was empty if the VM had fixed memory.  And now it can no longer be an empty setting.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • PDF export to Excel the decimal point is not displayed in the amount

    When I export a pricelist from pdf to excel then the decimal point is not displayed in the amount. It does'n matter in which language I try
    Anyone kow why?
    So the tool doesn't work for me.

    I have no problem. What is your country setting for the decimal separator?
    Attachments:
    read from csv.png ‏18 KB

  • Images are displayed wrong in firefox

    Hello!
    I am a photographer, uploading images in png to my gallery at deviantart.com. I noticed that the images are displayed wrongly in firefox - but in IE9 and Opera they are shown correctly. I have tried with different color management settings in about:config but none of that has solved the problem. I would like to know why it is that firefox can't show the colours correctly, like opera and IE?
    If it's impossible to fix I will just simply have to stop using firefox which would be a shame when I have been using the browser for many years. The problem has not existed earlier.
    Best regards

    http://kasperarts.deviantart.com/gallery/#/d2to4iq
    That image for instance. And I save them using Adobe RGB since thtat's the colour space I work in, but this has never been a problem before.

  • Mx Components displaying wrong the embedded Font

    Hi, I'm developing with Adobe Flash Builder 4.5 and I have a problem that the mx components displaying wrong the embedded font which is embedded in a css-file. But spark components have no problems with displaying the embedded font.
    thanks

    See the embedded fonts post on my blog.  The MX components default to a
    different embedded font subsystem.
    Alex Harui
    Flex SDK Team
    Adobe System, Inc.
    http://blogs.adobe.com/aharui

  • Fonts display wrong in Final Cut Pro

    One of the other editors in the office put together this piece and now I am making some changes to it on my machine. We're using the font "Baskerville" a common font that comes on the computer, and it is showing up correctly in the Font Book, but it is not showing up correctly in Final Cut Pro.
    There should be other options like regular, bold, semiBold etc, but there's only bold, italic, and bold italic.
    The other strange part is that when I first opened it on my computer it displayed wrong, and I tried reinstalling the fonts, and then it worked fine. I tried reinstalling the font again but it didn't help. I also tried restarting and that didn't help either. I checked in the Library > Fonts folder as well as the fonts folder under my user and the fonts match.
    Any suggestions as to what I could do?

    As far as I remember, Final Cut has always had this issue....
    I believe it has something to do with Final Cut only reading True Type (not Post script) fonts.
    That's why I only use Text for simple things like legals. For all other text uses, I use Photoshop...

  • Link Button Not Display for Tax Amount

    Hi Experts,
    I have one Problem
    I am creating A/R Invoice Document and I have assing Tax Code for Item
    It will show Tax Amount but link button or drill button not display for tax amount
    pls give me solution
    Warm Regards,
    Sandip Kokate

    HI
    How to Clear Chumb
    And I am Selecting Tax Code but still it will not show Tax Amount Link button but Tax Amount is perfectly Match
    Regards,
    Sandip kokate

  • How make display only the amount field in table control(infotype 0008)

    Dear Freinds,
    have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
    i have tried the below coding it is not working in PBO & PAI of the user exit
    ZXPADU01 and ZXPADU02. For the table control is there any othe method??
           loop at screen.
               screen-name  = 'WA_P0008-BET01'.
              screen-input = 0.
              screen-output = 1.
              modify screen.
          endloop.
    i have tried like this as well
           loop at screen.
               screen-name  = 'Q0008-BET01'.
              screen-input = 0.
              screen-output = 1.
              modify screen.
          endloop.
    in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
    regards
    syamla

    Dear Freinds,
    have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
    i have tried the below coding it is not working in PBO & PAI of the user exit
    ZXPADU01 and ZXPADU02. For the table control is there any othe method??
           loop at screen.
               screen-name  = 'WA_P0008-BET01'.
              screen-input = 0.
              screen-output = 1.
              modify screen.
          endloop.
    i have tried like this as well
           loop at screen.
               screen-name  = 'Q0008-BET01'.
              screen-input = 0.
              screen-output = 1.
              modify screen.
          endloop.
    in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
    regards
    syamla

Maybe you are looking for