Dev 6.0 Configuration Wizard
In the documentation Oracle claims the presence of a Wizard to
make easier the installation of Developer Server.
Does anyone know where can we find it ?
TIA
Tullio
null
The last I heard (while writing my Oracle Press book on 6.0), Oracle had decided not to ship the wizard. Sorry.
Similar Messages
-
OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB
I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfullyWhenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin -
Package Configuration Wizard or Project Deployment Model
I am using SQL Server 2012 and I have multiple SSIS packages working in DEV.
My aim is to deploy these to File System for execution by a Windows Service application. Should I therefore using the Package Configuration Wizard for storing DEV and PROD server details?
Is the Project Deployment Model only required when deploying to SQL Server?Hi DarrenOD,
The project deployment model enables you to deploy your projects to the Integration Services server. And there are some features like Parameters, Environment, Environment variables, SSISDB catalog and Catalog stored procedures and views that are available
to projects developed only for the project deployment model.
After converting project deployment model to package deployment model, there are four steps in the package deployment process:
The first optional step is optional and involves creating package configurations that update properties of package elements at run time. The configurations are automatically included when you deploy the packages.
The second step is to build the Integration Services project to create a package deployment utility. The deployment utility for the project contains the packages that you want to deploy.
The third step is to copy the deployment folder that was created when you built the Integration Services project to the target computer.
The fourth step is to run, on the target computer, the Package Installation Wizard to install the packages to the file system.
Reference:
Deployment of Projects and Packages
How to: Deploy a Package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
What may cause Errors.log to be generated from Essentials configuration wizard?
I customized install.wim to handle specific drivers, and while the OS installs properly... during the Essentials Configuration Wizard, the process nearly immediately stops at 0% and generates this file "Errors.log" with the contents:
FATAL: SetFolderPermission:
Is it just a corrupted install.wim, that just so happens to prevent the wizard from working... or did I accidently change permissions on something that would lead to this type of error?Well you finally lost me :) Any data partitions are pretty much irrelevant until after Essentials is done installing
Essentials does not get it "installed", Windows gets Installed, and then Essentials "Configures". As I said part of this configure is to decide where the largest data partition is. The team does not do tons of what if's in
the Dev cycle. I have no clue what that code/logic actually is, but I am certain it went no deeper than a normal standard Server install. They did not test different allocation units, smaller than standard "hidden partitions with drive letters.
This said, I was able to complete the Essentials configuration using my unattend.xml with 100, 350, and 328. I used diskpart to assign letters to the 100 and 350, and formatted a 70 gb "data" partition with the 64k and gave it B: But I am
confused as after Essentials config finished the 100 and 350 did not have drive letters? Also when I assign the letters it was not reflected in diskmgmt.msc. Right click still only showed Help. But File Explorer did.
So my ask would be that you edit your winpe to, 100, 350, and 328, and format the system drive with 4k and see if that works for you. Then we/you could change things one at a time to see what breaks it.
All this said, even if we can figure out what breaks it and I file a bug they may acknowledge it is a bug but will mark it as will not fix in this build, and the next build. If we can explain to the Dev team why it should work this way, that this is
the future of Server installs they may look at changing it in V.next.next t be shipped, who knows when. 3 years from now?
Grey -
PI7.1 Configuration Wizard NetWeaver Initial Setup
Hi,
I have installed PI7.1(XI0) and config the SLD via Configuration Wizard. I want to register to existing remote SLD(DEV) and need to input SLD client user, pls. tell me which system I need to create this client user?
Regards,
JackHi Jie,
I have not carried oyt any PI 7.1 installation, but yes PI 7.0.
In one of the steps of sapinst you are asked for SLD type (local or centralized). And every users needed to connect to SLD are created automatically and with the master password. Is it different in PI 7.1?
When you say vía Configuration Wizard, do you mean sapinst? or postinstallation steps?
Carlos -
In Eclipse Team Explorer, when I try to create TFSBuild.proj via Create Ant Build Configuration Wizard, when I click Finish, I get this error:
Error creating build configuration files: Invalid server path or the archive with the same name already exists on the server.
I also get this error in the Console, plus a couple other messages:
Specified argument was out of the range of valid values.
Parameter name: pathLength
Error creating build configuration files: Invalid server path or the archive with the same name already exists on the server.
I am following the instructions here:
https://www.visualstudio.com/en-us/setup-ci-build-in-eclipse.aspx
I have already successfully created build definitions and queued and run builds using Visual Studio. I'm using that same build agent.
Any ideas?
By the way, I'm using Visual Studio Online with an on-premises build agent.
Update: I also tried to delete my builds, delete the build agent, create a new build agent - still same problem.
I tried this on another dev machine with no visual studio or workspaces previously installed - still same problem.
I tried creating the version control folder where it was trying to store TFSBuild.proj. I tried using a build.xml that was in a shorter path. Still same problem.tomasr2 good evening.
I believe the problem is the same that occurs when we have the name of the files in the build nomento exceeding 250 characters
looking full name of TFSBuild.prj file (file directories +) with how many characters are getting?
For example: $ / Project1 / Solution1 / BuildDefinition1 / TFSBuild.prj => 50 characters.
I hope it helps.
Att
Guilherme Silva Cardoso -
PI 7.11 problem with configuration wizard
hello guys,
during the configuration wizard to use PI functionalty of my PI system I receive a massage regarding the not correct registration of my system into SLD
ABAP technical system 'SID on HOSTNAME\SID' not found . But it's correctly in the abap technical systems.
What could be wrong? Is it related to the fact I performed a NAMED INSTANCE installation with MSSQL ?
anyone of us had the same problem?Hello Bruno,
Please follow the MANUAL wizard from the link below:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/a0/40084136b5f423e10000000a155106/frameset.htm
Perhaps the automatic wizard could lead to a lot of problems.
It should solve the issue with the wizard.
Regards,
Caio Cagnani -
Re-Installing SharePoint Foundation 2010 - Product Configuration Wizard Error
So i recently had to start fresh on my SharePoint development server. My database was left remaining on a different server during this process.
So after re-installing SharePoint 2010, I told it to connect to an existing server farm, and then put my database server name in, from which it was able to retrieve the database name. After this step though i ran into my problems... For some reason it is
saying i don't have the appropriate software installed to finish the Configuration Wizard, when i know i have it.
What can I do to fix this problem?Hi Zipatones,
Honestly, it is difficult to diagnose the cause of your issue since there could be several reasons. The best I can do is give you several options one of which might be the solution.
1) During the configuration I would let SharePoint setup a new Config database. Then setup a new web application with the same URL as your original one. Instead of creating a site collection, detach that database and attach your original database.
2) Do the same for the service applications. Setup new service applications and then detach and attach the original databases. I highly recommend you use powershell for service apps since you need to find the guids of both the application and its proxy.
3) You need to make sure that the new SharePoint app server has the same version of updates (such as hotfixes) installed on your previous farm.
Hope these recommendations help.
Daniel Christian (MCTS) -
System
Provider
[ Name]
SharePoint
Products and Technologies Configuration
Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-11-06T02:03:00.000Z
EventRecordID
11054
Channel
Application
Computer
HZNTPMSWSMOS001.NEO-DIAGEO.com
Security
EventData
Failed
to create the configuration database. An exception of type
System.SystemException was thrown. Additional exception information: The trust
relationship between this workstation and the primary domain failed.
System.SystemException: The trust relationship between this workstation and the
primary domain failed. at
System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
sourceAccounts, Boolean& someFailed) at
System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at
System.Security.Principal.NTAccount.Translate(Type targetType) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
server, Boolean& isMachineAccount) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
identity, SPDatabase database) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
Microsoft.SharePoint.Administration.SPWindowsService.Update() at
Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
administrationContentDatabase, IdentityType identityType, String farmUser,
SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
IdentityType identityType, String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at
Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()Hi,
This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain. use the steps in the below link and try doing your steps again.
https://support.microsoft.com/kb/162797?wa=wsignin1.0
Regards -
OutOfMemoryError when running Oracle BPM Enterprise's Configuration Wizard
Hi,
I was trying to configure Oracle BPM Enterprise via Oracle BPM Admin Center. I left most of the settings to their respective default values; only adding in passwords for the Directory, Engine, etc. However an error was encountered when it is trying to deploy the '01-eng-bpmengine' EAR file. A 'OutOfMemoryError: Java heap space' was logged after running the configuration for a while. Below is the full error log:
AdmCenterConsole.log
FuegoLauncher.main()
fix classpath: C:\OraBPMwlHome\bin;C:\OraBPMwlHome\bin\lax.jar;
new classpath: C:\OraBPMwlHome\bin\lax.jar;FuegoLauncher.main() - 2
arg[0] = C:\OraBPMwlHome\bin\obpmadmcenter.properties
StreamLogOutput: No log file specified in property 'fuego.log.admcenter.file'.
Defaulting to System.err.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\Java\JDK16~1.0_1\jre\bin;C:\Java\JDK16~1.0_1\bin;C:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Java\jdk1.6.0_10\bin;C:\apache-ant-1.6.5\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] Your environment has been set.
[<I> 03/03/09 20:54:12]
[<I> 03/03/09 20:54:12] CLASSPATH=C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Java\JDK16~1.0_1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:13] Initializing WebLogic Scripting Tool (WLST) ...
[<I> 03/03/09 20:54:13]
[<I> 03/03/09 20:54:19] Welcome to WebLogic Server Administration Scripting Shell
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] Type help() for help on available commands
[<I> 03/03/09 20:54:19]
[<I> 03/03/09 20:54:19] t3://SN-06-SHENGYUEN:7001
[<I> 03/03/09 20:54:20] Connecting to t3://SN-06-SHENGYUEN:7001 with userid weblogic ...
[<I> 03/03/09 20:54:22] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'oft'.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Warning: An insecure protocol was used to connect to the
[<I> 03/03/09 20:54:22] server. To ensure on-the-wire security, the SSL port or
[<I> 03/03/09 20:54:22] Admin port should be used instead.
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Location changed to edit tree. This is a writable tree with
[<I> 03/03/09 20:54:22] DomainMBean as the root. To make changes you will need to start
[<I> 03/03/09 20:54:22] an edit session via startEdit().
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] For more help, use help(edit)
[<I> 03/03/09 20:54:22]
[<I> 03/03/09 20:54:22] Starting an edit session ...
[<I> 03/03/09 20:54:22] Started edit session, please be sure to save and activate your
[<I> 03/03/09 20:54:22] changes once you are done.
[<I> 03/03/09 20:54:22] creating mbean of type JMSServer ...
[<I> 03/03/09 20:54:22] creating mbean of type JMSSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type SubDeployment ...
[<I> 03/03/09 20:54:22] creating mbean of type Queue ...
[<I> 03/03/09 20:54:22] creating mbean of type Topic ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type ConnectionFactory ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type JDBCSystemResource ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] creating mbean of type Property ...
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSServer
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type SubDeployment
[<I> 03/03/09 20:54:22] setting attributes for mbean type Queue
[<I> 03/03/09 20:54:22] setting attributes for mbean type Topic
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JMSConnectionFactory
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCXAParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCConnectionPoolParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDriverParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCDataSourceParams
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCSystemResource
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] setting attributes for mbean type JDBCProperty
[<I> 03/03/09 20:54:22] Saving all your changes ...
[<I> 03/03/09 20:54:22] Saved all your changes successfully.
[<I> 03/03/09 20:54:22] Your edit session is not stopped, you can continue your edits.
[<I> 03/03/09 20:54:22] Activating all your changes, this may take a while ...
[<I> 03/03/09 20:54:22] The edit lock associated with this edit session is released
[<I> 03/03/09 20:54:22] once the activation is completed.
[<I> 03/03/09 20:54:23] Activation completed
[<I> 03/03/09 20:54:23] Creating a user ...
[<I> 03/03/09 20:54:23]
[<I> 03/03/09 20:54:23] User already exist
[<I> 03/03/09 20:54:23] Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:23] <Mar 3, 2009 8:54:23 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear], to AdminServer .>
[<I> 03/03/09 20:54:27] .Completed the deployment of Application with status completed
[<I> 03/03/09 20:54:27] Current Status of your Deployment:
[<I> 03/03/09 20:54:27] Deployment command type: deploy
[<I> 03/03/09 20:54:27] Deployment State : completed
[<I> 03/03/09 20:54:27] Deployment Message : no message
[<I> 03/03/09 20:54:27] Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets AdminServer (upload=true) ...
[<I> 03/03/09 20:54:27] <Mar 3, 2009 8:54:27 PM SGT> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear], to AdminServer .>
[<I> 03/03/09 20:54:43] Failed to deploy the application with status failed
[<I> 03/03/09 20:54:43] Current Status of your Deployment:
[<I> 03/03/09 20:54:43] Deployment command type: deploy
[<I> 03/03/09 20:54:43] Deployment State : failed
[<I> 03/03/09 20:54:43] Deployment Message : java.lang.OutOfMemoryError: Java heap space
[<I> 03/03/09 20:54:43] weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] No stack trace available.
[<I> 03/03/09 20:54:43] This Exception occurred at Tue Mar 03 20:54:43 SGT 2009.
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
[<I> 03/03/09 20:54:43] at org.python.core.PyMethod.__call__(PyMethod.java:96)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.__call__(PyObject.java:248)
[<I> 03/03/09 20:54:43] at org.python.core.PyObject.invoke(PyObject.java:2016)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.deploy$8(<iostream>:223)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx17.call_function(<iostream>)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:404)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:184)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:623)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:256)
[<I> 03/03/09 20:54:43] at org.python.core.PyFunction.__call__(PyFunction.java:169)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.f$0(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py:738)
[<I> 03/03/09 20:54:43] at org.python.pycode._pyx16.call_function(C:\Documents and Settings\shengyuen\.configWizard\tmp\config.py)
[<I> 03/03/09 20:54:43] at org.python.core.PyTableCode.call(PyTableCode.java:208)
[<I> 03/03/09 20:54:43] at org.python.core.PyCode.call(PyCode.java:14)
[<I> 03/03/09 20:54:43] at org.python.core.Py.runCode(Py.java:1135)
[<I> 03/03/09 20:54:43] at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] Exiting WebLogic Scripting Tool.
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43]
[<I> 03/03/09 20:54:43] at weblogic.management.scripting.WLST.main(WLST.java:129)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[<I> 03/03/09 20:54:43] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[<I> 03/03/09 20:54:43] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[<I> 03/03/09 20:54:43] at java.lang.reflect.Method.invoke(Method.java:597)
[<I> 03/03/09 20:54:43] at weblogic.WLST.main(WLST.java:29)
[<I> 03/03/09 20:54:43] <Mar 3, 2009 8:54:43 PM SGT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
Is there any way that I can increase the heap size of the Configuration Wizard? If not, is there any solution to this problem?Hi,
It seems to be a Weblogic OOM (OutOfMemory).
Why don't you try increasing the weblogic memory (you have to modify your domain scripts)
I guess that after increasing your WLS domain memory settings you will be able to configure it using the config wizard.
Hope this helps,
Ariel -
Office 2013 license pack does not allow me to activate key within configuration wizard
Hello,
I have a KMS host running Office 2010 activations for our client computers which is running fine. I installed the Office 2013 license pack on the same host. However, in the configuration wizard it doesn't allow me to activate the product key. Is there
a way around this?
My client laptop isn't activating against the KMS host, and I have Office 2013 installed on my laptop. This is what I get when I run
cscript ospp.vbs /act on my client laptop
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd c:\
c:\>cd program files
c:\Program Files>cd microsoft office
c:\Program Files\Microsoft Office>cd office 15
The system cannot find the path specified.
c:\Program Files\Microsoft Office>cd office15
c:\Program Files\Microsoft Office\Office15>ospp.vbs /act
c:\Program Files\Microsoft Office\Office15>cscript ospp.vbs /act
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
---Processing--------------------------
Installed product key detected - attempting to activate the following product:
SKU ID: b13afb38-cd79-4ae5-9f7f-eed058d750ca
LICENSE NAME: Office 15, OfficeStandardVL_KMS_Client edition
LICENSE DESCRIPTION: Office 15, VOLUME_KMSCLIENT channel
Last 5 characters of installed product key: 92CD4
ERROR CODE: 0xC004F038
ERROR DESCRIPTION: The Software Licensing Service reported that the product coul
d not be activated. The count reported by your Key Management Service (KMS) is i
nsufficient. Please contact your system administrator.
---Exiting-----------------------------
c:\Program Files\Microsoft Office\Office15>Hi,
Please check if your KMS host key for Office 2013 is valid and you can try to activate the KMS host by telephone.
To get the key for the Microsoft Office 2013 KMS, sign in to Microsoft Volume Licensing Service Center.
On this page, don’t choose the Key Management Service Host Key. Choose the Office version you are licensed for instead, and look for the KMS key for that version.
http://technet.microsoft.com/en-us/library/dn385356.aspx
To activate an Office KMS host by telephone
http://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_ToactivateanOfficeKMSbytelephone
KMS activation of Office 2013
http://technet.microsoft.com/en-us/library/ee624357.aspx
If issue persists, it is recommended to post the question in Office forums for further troubleshooting.
http://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro&filter=alltypes&sort=lastpostdesc
Hope this helps.
Jeremy Wu
TechNet Community Support -
Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm
Hi All,
I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
Failed to create the configuration database.
An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information: The given key was not present in the dictionary.
System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
Any ideas why this is happening?Hello together,
I get the same error mentioned above while running the configuration wizard.
My Serverenvironment:
- MS Server 2008 R2 Enterprise
- Virtual Machine (Host Machine also R2 Enterprise)
- SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
- Prerequisites installed without error (and current versions)
Error information:
"Failed to create the configuration database"
"An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
The given key was not present in the dictionary"
The logfile has the following entry:
7/2009 10:52:48 9 ERR Task configdb has failed with an unknown exception
12/07/2009 10:52:48 9 ERR Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
at System.ThrowHelper.ThrowKeyNotFoundException()
at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Any suggestions?
Thanks
Christoph -
Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh PainulyPosted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl -
Configuration wizard Weblogic deployment error [Admin Center]
I'm getting an error during the "Executing WLST Script" phase of the configuration wizard.
My environment:
BEA Weblogic Server 10.0 (installed with Workspace Studio 1.1)
Oracle BPM 10g3 (10.3.0.0)
Oracle Database 10g Express
This is what the AdmCenterConsole.log file has:
Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets BPMServer (upload=true) ...
<Jan 28, 2009 11:15:59 AM PST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear, to BPMServer .>
.Completed the deployment of Application with status completed
Current Status of your Deployment:
Deployment command type: deploy
Deployment State : completed
Deployment Message : no message
Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
<Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine -archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear-, to BPMServer .>
WLST-WLS-1233170095995: <Warning> <DeploymentService> <BEA-290003> <Deployment service servlet encountered an exception while handling request of type "app_upload". Exception is: "*Connection reset*".>
Failed to deploy the application with status failed
Current Status of your Deployment:
Deployment command type: deploy
Deployment State : failed
Deployment Message : weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041 Unable to upload 'C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear' to 't3://dmcad00064252:7001'
No stack trace available.
weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:49)
at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:535)
at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:427)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
at org.python.core.PyMethod.__call__(PyMethod.java:96)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.PyObject.invoke(PyObject.java:2016)
at org.python.pycode._pyx19.deploy$8(<iostream>:223)
at org.python.pycode._pyx19.call_function(<iostream>)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:404)
at org.python.core.PyFunction.__call__(PyFunction.java:184)
at org.python.pycode._pyx18.deploy_Applications$61(C:\Documents and Settings\c742323\.configWizard\tmp\config.py:623)
at org.python.pycode._pyx18.call_function(C:\Documents and Settings\c742323\.configWizard\tmp\config.py)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyTableCode.call(PyTableCode.java:256)
at org.python.core.PyFunction.__call__(PyFunction.java:169)
at org.python.pycode._pyx18.f$0(C:\Documents and Settings\c742323\.configWizard\tmp\config.py:738)
at org.python.pycode._pyx18.call_function(C:\Documents and Settings\c742323\.configWizard\tmp\config.py)
at org.python.core.PyTableCode.call(PyTableCode.java:208)
at org.python.core.PyCode.call(PyCode.java:14)
at org.python.core.Py.runCode(Py.java:1135)
at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
at weblogic.management.scripting.WLST.main(WLST.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.WLST.main(WLST.java:29)Hi. I'm having this same exact issue. My AdmCenterConsole.log contains the same error. Additionally, the log file for my BPMDomain log contains this information:
Current Status of your Deployment:
Deployment command type: deploy
Deployment State : failed
Deployment Message : weblogic.management.ManagementException: [Deployer:149003]Unable to access application source information in '[DeploymentService:290003]Deployment service servlet encountered an exception while handling request of type "app_upload". Exception is: "Read timed out".\app\01-eng-albpmengine.ear' for application '01-eng-albpmengine'. The specific error is: No application files exist.
No stack trace available.
This Exception occurred at Sun Apr 19 14:29:13 CDT 2009.
weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
mick3y -- Did you happen to ever get this issue resolved?
Thanks, Alan -
Hi Techys,
Kindly help me to resolve the below issue
"Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
Many Thanks,
MadhuHi,
Follow this link for smooth installation for SP 2010 on Win 7.
http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
Murugesa Pandian.,MCTS|App.Development|Configure
Maybe you are looking for
-
Actual cost of product in COPA
Dear all, I am relatively new to COPA functionality. The requirement is that actual cost of product should be reflected in COPA and not the planned. Kindly give me the background also, as in the integration of COPC and COPA. Thanks in advance
-
No Disks Found! error during install of Solaris10 R10 on OracleVM 3.0.1
Has anybody got Solaris 10 R10 working in OracleVM 3.0.1? I have Linux 6.1 and Solaris11 working fine. But get no disks found during iso install of Solaris10 R10.
-
Why does photoshop cc 2014 stop working when extracting 3D
I recently acquired photoshop cc 2014 and would like to use 3D. When I try to extrude a file, my photoshop stops working. I have an AMD Radeon HD 8400 graphics card.
-
How do i get purchased music from my ipod into my itunes?
I am trying to put the music i just purchased on my Ipod into my Itunes but can't figure it out
-
Hi, I m facing some strange issues in a java file. The requirement is something like, i need to process some business operation , connect to a third party vendor and they need to process some operation in 10 secs and they reverted back with the resul