Dev 6.0 Reports: Error when generating delimited output

It seems there may be a problem when trying to use the generate
delimited output command in Developer 6.0 Reports run-time.
I have a report with a formula column that performs a simple
calculation 'x is what percent of y,' where x and y are fields on
the report. From Report Builder I can preview the report and
generate delimited output without any problems. It is quite
nice. Unfortunately this is not true when using the run-time
exacutable outside of Report Builder.
The report runs without a problem, but when I choose to generate
to a file as delimited output (comma delimited with quotes as
cell wrappers) I receive the error:
'REP-1249 Column <column name> has no PL/SQL formula.' It seems
that summary columns work fine, but if the report contains a
formula column then it fails. If I remove the formula column and
generate to a file as delimited output it works fine.
Does anyone have any suggestions as to how to solve this problem?
Thanks,
Scott H.
null

Scott H. (guest) wrote:
: It seems there may be a problem when trying to use the generate
: delimited output command in Developer 6.0 Reports run-time.
: I have a report with a formula column that performs a simple
: calculation 'x is what percent of y,' where x and y are fields
on
: the report. From Report Builder I can preview the report and
: generate delimited output without any problems. It is quite
: nice. Unfortunately this is not true when using the run-time
: exacutable outside of Report Builder.
: The report runs without a problem, but when I choose to
generate
: to a file as delimited output (comma delimited with quotes as
: cell wrappers) I receive the error:
: 'REP-1249 Column <column name> has no PL/SQL formula.' It
seems
: that summary columns work fine, but if the report contains a
: formula column then it fails. If I remove the formula column
and
: generate to a file as delimited output it works fine.
: Does anyone have any suggestions as to how to solve this
problem?
: Thanks,
: Scott H.
Hi Scott,
could only guess, but try to have your report compiled to a .rep
file instead of using .rdf. Maybe it helps.
null

Similar Messages

PDF Report Error When Distribute the Output?

REP-0069: Internal Error.
REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
REP-50159: Executed successfully but there were some errors when distribute the output.
Approximately 5000 Pages
Distribute PDF File Approximately 1700 Files
How i can resolve this issue?

Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
those patches.
Reference
Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
Regards RZ

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format

We are unable to open pdf reports in Workspace with the following error. It was all working fine and doesn't work now for unknown reasons.
Error 500 Internal Server Error" When Generating Hyperion Financial Reports in PDF Format
We are on 11.1.2.1 environment. Ghost Script 8.54 and Java heap settings xms256m and xmx512m.
Please advice.

hello,
just to clarify
a) the parameter is named DESFORMAT not :DESFORMAT, there is
no : in front of the name, if you submit it via URL !
b) there are some issues with acrobat5 and IE but those are not
only caused by PDFs generated with oracle reports.
regards,
the oracle reports team --pw

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Error when generating program /SAPAPO/TSM141 and Errors in source system

Hello APO Experts!
I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
Do you have any idea of what this could be?
Best Regards
Nik

Hello,
The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
- SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from '/1APO/EXT_STRU'.
- SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
Are the two extraction structures the same or different ?
If they're different, please read the below solutions, otherwise, you can ignore the following.
In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
Please refer to following content from note 549184:
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the structure of the planning areas. That's why the planning area MUST ALWAYS be transported with or before the DataSource.
The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
- Basis - form routines
- Create planning objects
- Planning area extractor
with the flags "Reset generation time stamp" and "Generate" set.
And in order to transfer datasource correctly, please also refer to the consulting note 514524.
Best Regards,
Ada

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when generating master data routines

Hello all,
I´m trying to activate 0BPARTNER but an error appears: Error when generating master data routines, and no more information is provided.
I´m working with BW 7.0.
Has anybody had this problem?
How could I solve it?
Thanks in advance.
Carmen

Hi Carmen,
I'm working with SAP BW 700 and I had also this error during a characteristic activation in my QA system. This happened when I tried to transport the activated characteristic from my DEV system.
I found also message TK425 when I was trying activation through RSDG_IOBJ_ACTIVATE program.
I solved this error message with OSS note 01458319 700SP24: "Transport fails during the impact analysis of DTP".-
I hope this helps.
Best Regards.
AW

Error when generating program /SAPAPO/TSM141

Hello APO Experts!!
I have one infocube for sales history, which has one key figure that contains the sales history values.
First, I was using this key figure in one planning area. This Key Figure Semantics for Read and Write Operations was 002 = Semantics for InfoCube key figures.
Now, I had to include the same key figure in another planning area and with the same configuration Semantics = 002.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" when trying to access the data in the planning books that are created in the first planning area.
For the second planning area, nothing happens, everything is working correctly.
Do you have any idea of what this could be?
Regards
Anglea

Hi
Sounds like a Planning Area extraction problem. First of all check that all your required BW InfoObjects are created for the Planning Areas, then check that the Semantics you mentioned are the same for all Aggregates in the Planning Area.
Also try running program /SAPAPO/TS_PSTRU_GEN to regenerate the planning area extractor.
Delete and recreate the data source.
Hope that helps
Regards
Ian

Error when Generating the Selection Screen?

Hi Guys,
               When i am executing the program with this code .I am getting this type of Error
" Source code   ZUSFICOR00013_MM_ACNT_COSTING                Line     0
Error when generating the selection screen "1000" of report
             I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.

Hi Seshu,
              While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
              I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
               and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
                 I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
     Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi.

Error When generating dataprovider

HI ,
i get an error message while executing a query in rsrt.
"Error When generating dataprovider
Notification Number BRAIN 282 "
require help in this regard,
Rakesh.

By best approach in that case is trial and error.
Copy that query to a new one and change it step by step (creating it simpler, by removing key figures and characteristics) executing it in each step until you don't find the error. There you can see what is causing that error.
Diogo.

Error when generating catalog SRM_EXTRACTED_CTLG

Dear All,
We are trying to transfer product and contract catalogs from SRM server to Catalog authoring tool. The RFC connections were created and scenarios in XI have been imported as per the cookbook. The XI part seems to be working fine and a correct response was received by XI (as per SXMB_MONI), but we find the following error in the SRM application log (tcode: SLG1)
The following exception was raised:
/CCM/CX_OBJECT_CREATION_FAILED
Error when generating catalog SRM_EXTRACTED_CTLG
The exception occurred at the following point:
Program /CCM/CL_CATALOG_MANAGER=======CP
$EXC_CLASS /CCM/CX_OBJECT_NOT_FOUND
The earlier threads seemed to mention applying service packs so we did a check and found everything fairly up to date, as follows:
SRM Server 5.5 (Service Pack 4)
ABAP Rel 7 (Service Pack 7)
CCM Server 2 (Service Pack 4)
As I'm basically an XI person, I'm not sure how to debug this error. Can anyone please help me out on his?
Thanks and Regards
Arun

Hi All,
Just bumping up my question again. Any pointer on this... please?
Best regards,
Arun

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Dev 6.0 Reports: Error when generating delimited output

Similar Messages

Maybe you are looking for