Dev 6.0: Where is Role Editor?

The on-line help topic "Creating database Roles" shows that File-
Administration->Database Roles should bring up a database role editor (for menu security).
Where is it? I'm running Forms Builder 6.0.5.29.4 and it's not
on the menu!!!
TIA
Eric Raskin
null

Some properties has been relocated to the sections Main, Header,
Trailer of Layout Model.
Andrei Kvasyuk (guest) wrote:
: Hi !
: There are no any references to properties
: For Page:
: Width
: Height
: For Report:
: Report Width
: Report Height
: But these was presented in Developer 2000.
: How to change it ?
null

Similar Messages

Where is the editor window in elements 12?

When I open up Elements 12 on my computer or laptop, the options bar that shows quick, guided and expert is not there. Where the hell is it?

Quick, guided and expert are three editors aimed at different abilities. If you are relatively new to photo editing click quick or guided, if you are more experienced click expert.
To load an image directly into the any of the three editors options select File, then Open and then the image you wish to edit.

Where are role and administrator settings saved?

We have had issues in the past that have caused us to have to
re-setup our site, including all administrative settings and all
roles and users. Surely all of this is saved somewhere. If we just
knew where, we could backup the info for an easier restore if
further problems ensue.
Anyone know how to backup site settings?

I got the following reply on a separate forum:
quote:
For a website that has been administered by Contribute
(Publishing server is not enabled), you would find an _mm folder in
the website root on the remove server. This is a contribute
specific folder and it contains the administrative settings, role
information and users.
For CPS managed sites, the _mm folder still holds the
information about the administrative settings and role information.
The user information of the sites are stored in the Database folder
of CPS. The Database folder can be found in the following location,
<CPS Install Path>\Database.

Where the roles are displayed in Visual Administrator

I have created the roles through user admin i.e using
http://<server-name>:50000/useradmin/ . In Visual Administrator where I could see those roles.

hi
Visit the Cluster --> Server --> Services --> Security Provider -->User Management Tab
You may search for your users there and assign/re-assign the roles to them.
Regards
Ak.
Message was edited by: Arunkumar Ravi

Tranport role from Dev to Prod without overwriting role menu

Hi Experts,
We have users who have saved BW workbooks in the roles. They appear as transactions in the role menu. Now when we are transporting the roles the role menu is getting overwritten and all the workbooks are no more in the Role menu and so not visible to the users.
How can we transport the BW roles without overwriting the Role menu ? Please help
Thanks a million
Sunil Kumar

How can we transport the BW roles without overwriting the Role menu ? Please help
I doubt whether this is possible or not.... Well for instant damage control you look in change history to find out what was there in menu before?? And put them back as it was before.
For a permanent solution it is already suggested in earlier posts... that is to have a menu role concept used only for query, work book saving pupose and these are not getting transported in any case.
Arpan

Eclipse WST: where are the editors?

I installed WST plugin for Eclipse but can't find e.g. any XML editor. I also tried the tutorial at http://www.eclipse.org/webtools/testtutorials/M2/xml/XMLWizards.html but I also don't have a "XML Source Page Editor" or "XML Editor" to choose. ?

check the prerequisites. You need to install some other stuff...
namely:
# The EMF driver used in this build is emf-sdo-xsd-SDK-I200506230200.zip
# The GEF driver used in this build is GEF-SDK-3.1RC4.zip
# Java EMF Model Runtime driver used in this build is JEM-SDK-I20050623.zip

Where is Role store in Access Manager ?

Hello,
How i get Role of User from Access Manager .
In Access Manager if i create Role = "Sale Role" and assign User to this Role.
Whare is "Sale Role" store in LDAP tree ?

Try the System Administration Guide: Naming and Directory Services (DNS, NIS, and LDAP) ( http://docs.sun.com/doc/806-4077 ). As mentioned in that doc, you'll need to set up Directory Server before you can use it.
Hope that helps,
Mark

Where is the Editor in Premier Elements + Organizer?

Is there Elements without the Editor? If so, how do I get the editor? I bought and downloaded yesterday.

Welcome to the forum.
No, Premiere Elements IS an editor. It is a Non Linear Editor (NLE) for Video.
What exactly installed for you?
Did you purchase the bundle with PrElements and Photoshop Elements?
Did you also download the file for the Additional Functional Content?
Did you buy directly from Adobe?
Good luck, and please let us know a bit more.
Hunt

Where does Phone Editor store sms on pc?

Does anybody know in which file and which directory Phone Editor stores the sms' when transferred from mobilephone to PC?
I need to format my hard disk and I don't want to loose all the sms I saved during last years.
Thanx,
savo

Phone connected, Open File Manager (Nokia PHone Browser, scroll to phone folder - messages and you will get "meesages" option in Windows Explorer view (upper control bar), select that and select archive your messages.
Note, that means you will have your SMS's archived in your PC (those are not easily transferred back to any phone), but atleast you have them

In asap methodology where the role of abapers will come?

friends let me know ,in project implementation in which phase the abapers are going to
involve ?please provide me in detail?

Hi,
In Project Implementation when the Design Phase will start then the developers come into Picture.
When Function Specification or Blue Print is ready then you require developers and also Technical Lead to be in conference calls or in picture with the client to know the requirement .
Based on that Design Document is prepared beased on developers start the development .
PLease reward if useful.

Transporting a role from DEV to QAS in a Workflow

Hi,
I assigned a Role as the possible agent for a std task in DEV. I transported from DEV to QAS, first the Role (where I see the Std. task to which it is assigned and the corresponding WF template in PFCG for the role) with a Customizing Req. and then transported the WFlow template & associated std.task with a WBench TReq.
The transport is successful without any errors.
But, when I see the agent assignment for the task in QAS, the role is gone. Also, When I see the role Maintenance PFCG for this role, I don't see any WFlow tasks in the Workflow tab.
I tried to trasport this sequence(first role and then the wflow & std. task associated with it) twice, but in vain.
Can somebody pl tell me what's going on with the transport of the roles(that should include the wflow tasks & templates).
Thanks in advance
venu

Mike,
Infact I did first time transport in the sequence of WB req and then Cust. Req. It didn't help and then I tried the other sequence too.
And Could you tell me how to look into the WF configuration of the system to see if it is set to transport the Roles?
Actually, i tried transporting 3 roles under one Cust. Tran.Req, but only one Role got transported correctly and the rest two have been failing.
Pl. tell me if I am doing it correctly...
thank you
venu

Transporting roles from sandbox to a DEV environment

Hi all,
We have some external consultants who have been developing/modifying roles in a sandbox. They have put in a lot of work into this effort and do no want to re-create these roles in the DEV environment. Does SAP best practice allow us to transport these roles from the SANDBOX to the DEV ? or do we insist that the roles be re-created in the DEV box ? Will there be maintenance issues down the road if we do the tranport ?
Thanks,
Denis Louis

Yes, you can download them to your desktop and upload them to the DEV...
PFCG -> Role -> Download and Upload
Regards
Juan

Initiater for Role removal.

Hi,
I need some update/input w.r.t Role removal Initiator. While configuring the role removal is it possible to use the role status in the initiator? If not how to identify this role is only for the role removal.
Normally we use to put only one stage for Role removal. In the config, no where we are having automatic check for the request is only for the Role removal. So we have to trust that particular stage owners. As per the CUP automation check is it possible to validate this?
Thanks in advance.
Regards,
Vasantha Kumar.

Hi Justin
I'm assuming you are involved in or victim of a security access review. I'm usually one of those security guys asking for role or transaction removal and you are the main contact in the business coordinating the changes.
The process of remediation will possibly consist of checking which transactions are causing segregation of duties conflict, if they are used or not and removing one side of the conflict by removing an unused transaction.
It shouldn't require the entire contents of a role to be removed - rather swapping role A for role B without a transaction or two.
Removing transactions that aren't used can have more subtle implications which hopefully are found during UAT but is usually missed until used in anger. This what support is for after go live.
Saying all that and depending on your time and skills, you could ask for access to the security person's test user in dev or qas where they are working to run transaction SUIM on transaction for user following the proposed changes and compare that to the actual access of the real affected user in prod. If you can get access to the informer tab in virsa you can use the standard simulation reports to also check the resulting conflicts which will help you talk to the business and advise on actions available. There should be role owners involved in all this as they have to owner the result: expect a request for these for CUP later on
If you can retain control and approval of the (controlled) changes being made to users you will have a better understanding of what is happening, catch potential errors and mediate between security and the business - you have an important task!
Ask for some basic training in standard SAP reports - the security team should be more than grateful for your input
Crikey that was hard typing on an iPhone!
Cheers
Edited by: David Berry on Jan 11, 2011 8:17 PM

Composite Release Roles Best Practice

I have a question in regards to best practice for utilizing composite release roles.
We had an issue recently where Purchasing Doc Type (M_BEST_BSA - BSART), Release Code (M_EINK_FRG - FRGCO) and Release Group (M_EINK_FRG - FRGCO), which are maintained at the task role were over written with blanks when derived from the template role. The template role has these three fields maintained as blanks. All other data is consisten from the template role to the task role with the exception of the Organizational Levls (ie Plant, Purchasing Org, Purchasing Group). We then have a variety of task roles that make up the composite.
Would it make sense to maintain these three fields as Org Level data at in the task role?
What are our other options?
Thanks for your assistance.

We do have DEV, QA, PRD, Training and Sandbox environments. Our standard practice is to develop in DEV (200) role out to the other DEV clients and then transport to QA for UAT. I have come across on occasion where the roles are not consistant across all DEV clients and if development work was completed on a role in DEV that was not consistant with the production role then we would be fubar. This did occur a few weeks back; however, it was caught in time.
Chain of events went as follows
1. Request submitted to remove a plant value
2. Dev work completed and moved to QA. Based on screen shots of UAT we can see that the three fields were yellow at this point (blank values)
3. End user did not recognize the caution flags as they were only looking at org value to ensure plant was removed.
4. Developer failed to highlight the unmaintained fields
5. Roles moved to production which halted purchasing teams
This hole thing is very confusing
My only guess was the development work was completed on an old role in the wrong dev client. But then this opens up another issue. Why was there an old role as standard practice is to move the new roles to all dev clients once completed.

Set of Roles were deleted across the landscape.

Hi,
The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
SV

>
Sukumar Vempati wrote:
> Hi,
>
> The set of roles were removed or deleted acorss the landscape long back and again i see the same roles in Quality system only not in any other systems.
> As i verified the change documnet of the role and system is hitting the message as "No change documnet found".
> Kindly provide me the solution as how it will re-buold only in quality system not in any other ssytems?
>
> SV
Your Quality system must have been refreshed from the system where the role already existed.
If the roles were removed from Dev -> Qual -> Prod landscape and you are now getting it in Quality again, the possible reason could be your Basis team copying it from someplace where the roles where not deleted. And it is not showing in change document because the change was not done in that system from where it was copied.
Check with the your Basis team if something was done in your quality system recently.

Dev 6.0: Where is Role Editor?

Similar Messages

Maybe you are looking for