Dev alpha c official os update requested

Hi friends
If u get some news about the BlackBerry dev alpha c official Os update, then post here....not the leaked one
Thanku

Ok, looks like I had to do a battery pull and then just keep tapping the 'Try it' button. Eventually it moved me to a screen where I could swipe in an app and perform the tutorial actions. Huge PITA, but I hope I'm the edge case here.
Rion

Similar Messages

  • Upgrade dev alpha to bb os10

    hi, recently i acquired my z10 with the bb os10 software. However, there is a problem with the BBM as it can't connect to server. Then i use the autoloader for bb dev alpha and the bbm works. Now i want to revert back to bb os10 for the official release, is that possible? because i can't access my media features and most features went missing. Please help me with this problems.

    The BBM server issues from the past 24 hours should be remedied by now, and you should have no problems.
    If they persist, you should call your mobile provider and have this issue escalated to RIM's technical support.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Want to Un install the BB Z 10 Dev Alpha

    Dear Team!
    After a recent update to my BB Z10, it shows as Dev Alpha and now my BB Z 10 has got limited functions.
    Please be kind enough to advise how can I go back to my original BB Z 10 software.
    Kind Regards
    Aslam Fidha

    Hey aslamfidha86,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Did you update your software from an official release from your network service provider or was it a different version from the computer?  Also what version did you update to?
    I look forward to your reply.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Q10 10.2.1 OS on a Dev Alpha C?

    Hello,
    I would like to use the "full" 10.2.1 OS release of the Q10 on my Dev Alpha C and not just the Developer OS version of it.
    Would the full Q10 OS work on a DAC?
    If so, where can I download it?

    Yes, two ways.
    I would recommend using the Sachesi install process here.
    Upgrading BB10 OS Using Sachesi
    You can also use this:
    Upgrading OS10 devices using Autoloader
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Setuping BlackBerry Dev Alpha for development

    Hello,
    at first I did not know where to put this, since developer support forums are more code oriented, so I choose this forum, I hope it is okay, otherwise please move it to correct forum.
    I am trying to setup BlackBerry Dev Alpha device for development on my workstation. I am running Windows 8 Pro x64, freshly installed and I installed latest BlackBerry Development Kit and BlackBerry Device Manager. The Alpha device was updated to the latest version. Now I am having trouble connecting to the device in the IDE.
    My question is, why my PC cannot connect ot BlackBerry Dev Alpha device? IDE displays Unable to connect. Check USB cable or WiFi connection.
    The following facts are true:
    - Device is connected with normal MicroUSB cable without hubs
    - Device is detected in BlackBerry Device Manager and IP is displayed
    - Development mode is on, password is set
    - IP of  the device is 169.254.1.1, set in development mode screen (tried also another IP, no effect)
    - Target in Momentics is created manually (autodiscover does not work)
    - Windows Firewall is OFF
    - Pinging the device IP in command prompt returns no reply
    Is there something wrong with the device? Considering I cannot run camera, I might have received bad device.
    Best Regards,
    Legoless

    I got same sometime.
    I'm use action as below to solve.
    1. Check USB Cable
    2. Check Device in Device Manager , you may found UNKNOW Device or device with   yellow "!" sign.
    3.  Remove all unknow device.
    4,  unplug USB Cable and re-plug again
    5.  try detect hardware by scan hardware,
    6, If device not complete ,  Try force install device driver for new hardware that you computer found.
    Hope it help.  
    Sorry for my English.   
    If it helped please click LIKE  for me.
    Thank.
    Tamamaxx

  • Can't access my Dev Alpha (A)

    Hi,
    I just rebooted my Dev Alpha and it says "Thanks for participating" and I can't do anything but to turn it off.
    How to get access to it again?
    Thanks
    P.S. I'm on Windows XP
    Solved!
    Go to Solution.

    The Dev Alpha A is no longer officially supported as of 10.1.0.1485. You can try downloading newer builds on to the divice from here:https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html 
    But it is NOT supported. 
    Hope this was helpful. Happy Coding!
    EK @echotown

  • Q 10 DEV ALPHA SEVER PROBLEM

    I have Q 10, and its Model Number is Dev Alpha and it is imported from UK and i am using this in Pakistan.
    There is a strange issue that it has missing;
    Docs to go
    Movie Maker
    Pictures
    Players
    and few more
    I cant even able to see blackberry protect ...
    it is running with 10.0.0.341 OS, can some one help that why i cant able to see these features in my BB

    To load stock OS (last resort)
    If for some reason the above steps don't work using BlackBerry Link you can always reload the OS using Internet Explorer. These steps are a bit trickier so read through and make sure you understand everything before you get started.
    - Make sure you don't have any BlackBerry software running on your PC (BlackBerry Link and BlackBerry Desktop Software)
    - Detach all BlackBerry smartphones, including the BlackBerry 10 device that you are going to restore.
    - Using Internet Explorer navigate to www.BlackBerry.com/updates then scroll down the page and select the Check for Updates button.
    - Connect the BlackBerry 10 device you want to restore
    - Hold the power button for 10 seconds until the device turns off, then press the power button again so it turns on.
    - A prompt will appear and the BlackBerry smartphone will show in the drop down list on your PC shortly after the LED lights up (it could show up as USB: UNKNOWN or USB: BlackBerry (PIN) – both are normal/fine).
    - Click the OK Button as soon as it becomes enabled - you only have a few seconds to do this!
    - Once the above steps are completed successfully a dialog will be displayed stating Checking for BlackBerry Device Software updates
    - Your device power itself off after two minutes. Shortly after, the device LED should turn green.
    - Continue to wait after the LED turns green and you will be prompted to install BlackBerry Device Software. Follow the prompts to install the BlackBerry Software and finish the software installation
    Note: You need to be running windows again for this.

  • Text messages not working on Dev Alpha

    Hi,
    I recently updated my Dev Alpha B device to the latest OS version (10.0.10 Bundle 263), it includes a text messages app and it also includes text messages in the BlackBerry 10 Hub. As far as I can see none of this works, I can compose a message, but when I tap send the app just reverts to it's original state and the message never gets sent, There's no error message. I can't receive text messages either. The rest of the BlackBerry hub works, the phone app also works, so there's no problem with my cell network connection.
    Is this a known issue? Will we get an update that fixes this?
    Please click the like button if my post helped you! Thank you.

    can you make & receive phone calls?
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Can not update request in data target

    Hi,
    We have a process chain for master data (10 parallel) loads.  One of the load
    failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
    When I checked the InfoPackage
    (a) update: full load
    (b) it has data selection
    (c) processing :PSA and then to data targets
    (d) Data targets: update in all data targets for which active rules exist.
    But I do not see any list of data targets here.
    Can some one please suggest me how do I correct this load failure.
    Thanks

    Hi Wondewossen, NS and Nagesh,
    Thanks for the information. I am in support, and the developer is
    not here now.
    I have checked Header tab in the monitor, in this there
    is a update symbol and infosource name and an -->
    but after arrow there is nothing.
    when I click on this I get a message
    "No active update rules exist".
    Can you please advice me how to I correct this.
    Thanks

  • One or more of the updates requested by Final Cut Server could not be...

    We are getting the warning " One or more of the updates requested by Final Cut Server could not be applied. (one or more replacement file(s) had unexpected track settings.)" when a FCPv6.06 (possibly also FCPv7.0) project file is checked-out of Final Cut Server v1.5.1. The assets linked to the project are cached down successfully (this in not an XSAN environment) but opening the project alerts to some offline media files (not all) and we need to manually relink them to the assets in the Final Cut Server cache. All is good again until the project file is checked-out of FCSvr to another workstation.
    Having a look at the path of the offline files it is referencing the path of the assets as they were on the previous editor's (different) workstation. None of our workstations have the same path to the Final Cut Server cache.
    My understanding and experience is that FCSvr manages the paths for FCP linked assets and modifies the checked-out file's path to point to the workstation's FCSvr cache?
    Can you tell me how I can resolve this issue?

    I may have resolved this issue today or I'm at a stage where I can't replicate it. The problem may have been propagating from a within a template FCP project file we use to start our productions. I assume it was a corruption of the FCP file that FCSvr didn't recognise?

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • Cannot remove an update request in Mac App Store

    A friend used my macbook pro to purchase an app. I no longer wanted that app and deleted it.  However, the Mac App Store keeps asking me to update the app and when I click on 'update' it asks for my friend's App Store ID.  I would like to remove this update request so I can get back to using update all.
    Anyone know which file on my Mac holds these requests?

    Any ideas on what that file is called?
    Yes, it's called a pirated app. Most of the times that folks see an update for Angry Birds and an Apple ID of someone else, it means that they have a pirated app. Angry Birds is not on their Mac, but someone has cracked an app that is sold in the Mac App Store (MAS) with the MAS-receipt from the free Angry Birds app.
    This is the method that I came up with last year when pirated apps first started showing up after the advent of the MAS.
    Finding a pirated app -
    When a stranger's Apple ID appears on your Mac in conjunction with an update for an app that you have never installed, you have a pirated app on your Mac. This pirated app has been cracked with the MAS receipt from the Angry Birds app acquired by the person whose Apple ID you see.
    You may not have realized that it was a pirated app when you installed it. You may have believed that it was a trail version or a "free" version.
    All MAS apps have a MAS receipt in their app bundle. Check any app acquired from the MAS. Right click on the app's icon in your Apps folder and choose Show package contents. In the Contents folder is a _MASReceipt folder and in that folder is the coded MAS receipt. It has the Apple ID of the MAS account that bought/acquired the app from the MAS. It is that receipt that the MAS uses to alert you that an app has an update. There would not be a notice of an update with someone else's Apple ID showing in the MAS on your Mac, if there was not an app with a receipt from this person's account somewhere on your Mac.
    Download the free app FindAnyFile (FAF);
    http://apps.tempel.org/FindAnyFile/
    This app is easier to use and seems to be more powerful than Spotlight. Open FAF and in the box type _MASReceipt and press Find. It should come up with a list of every app on the Mac with a MAS receipt. Compare the apps with receipts in FAF's list with your purchased apps list in the Mac App Store. The odd app out should be the pirated app.

  • Problem with Profile-Update-Request

    I have a problem when I Try to use the profile update request.
    First, I can use the "User-Data-Request" without problems. I use this sentences:
    ->String docSel="sh://sip:[email protected]/IMSPublicIdentity/";
    ->Document doc = psvc.getDocument(docSel);
    But, when I Try to add a new line to modify the document (I send the same document witohout changes it):
    ->psvc.putDocument(docSel, doc)
    I receive this exception:
    java.lang.IllegalArgumentException: Access key invalid for request at com.bea.wcp.diameter.sh.ShSession.createRequest(ShSession.java:40)
    at com.bea.wcp.diameter.sh.ShSession.createPUR (ShSession.java:26)
    at com.bea.wcp.diameter.sh.ShApplication.putDocument(ShApplication.java:147)
    at com.bea.wcp.diameter.sh.WlssShApplication.putDocument(WlssShApplication.java:79)
    at com.bea.wcp.profile.ShProviderDirect.putDocument(ShProviderDirect.java:63)
    at com.bea.wcp.profile.ShProviderCached.putDocument(ShProviderCached.java:65)
    at com.bea.wcp.sip.engine.WlssProfileService.putDocument(WlssProfileService.java:320)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3217)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:1984)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1891)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
    Whats it's the problem?I think that I´m using the correct sentences to
    send the profile, and I don´t know why receive this exception.
    ´Thanks, david.

    I try to use RepositoryData and I obtain an exception too, but it´s different. In this case is:
    ####<13-feb-2008 16H09' CET> <Error> <Kernel> <CANASD-HP> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1202915357551> <BEA-000802> <ExecuteRequest failed
    java.lang.NullPointerException: .
    java.lang.NullPointerException:
         at com.bea.wcp.diameter.Request.sendAnswer(Request.java:197)
         at com.bea.wcp.diameter.Answer.commit(Answer.java:125)
         at com.bea.wcp.diameter.Session.sndMessage(Session.java:232)
         at com.bea.wcp.diameter.Answer.send(Answer.java:118)
         at com.bea.wcp.diameter.Transaction$1.run(Transaction.java:165)
         at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181).
    For the HSS I´m using a simulator called FHoSS. Do you know that this simulator work well with WLSS?
    Thanks.

  • Keep getting Update requests

    I have an HP laptop running Windows 8. While using internet browser I am persistantly bothered with requests to allow Adobe to update the \\\flash \player - this happens every 10 minutes or so. I have installed the requested update but 10 minutes later I get another request for the same update. I have restarted the laptop - still same issue - I have uninstalled and re-installed the latest Adobe version but this issue keeps happening. It is very annoying. How do I stop these annoying update requests.

    If files already have been downloaded then remove the files in the updates and updates\0 folder.
    You can also delete active-update.xml and possibly updates.xml (stores the update history).
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    C:\Documents and Settings\&lt;user&gt;\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
    (%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox)

  • Need file manager for dev alpha b

    can some one give me link to best file manager for my dev alpha b device,as i didnt got it installed from default os

    Try this:
    Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands

Maybe you are looking for