Dev alpha change to normal STL100-1 HELP PLEASE

Hi i did a security wipe on my phone and after batteling to install the os again i finaly have DEV ALPHA installed but there are some stuff missing ive googled and googled and still there is no where to download the original STL100-1 OS that my phone came with 
Please if there is anybody that knows where i can get it please assisst 
Much appriciated 

Check out OSBB at this link here http://opensourcebb.com/2013/01/download-links-for-all-playbook-and-dev-alpha-oses/ I'm not sure where BlackBerry keeps a backlog of these or if they do. But you might want to use your PC / Mac to download whatever the latest OS is from developer.blackberry.com That's what I did before sending it back.

Similar Messages

  • My iphone 4 is stuck in super large screen view. tried rebooting, syncing, restore, shutting down etc. my grandson 'enlarged' the view more than is normally possible. Help please!

    My iphone 4 is stuck in super large screen view. tried rebooting, syncing, restore, shutting down etc. my grandson 'enlarged' the view more than is normally possible. Help please!

    Thank you for the prompt and correct reply, I'm now back in the land of the living and will now cancel my genius bar reservation at my local Apple store. Thanks again R.

  • I'm looking to change my card details, but on my account page, password, username etc ect, it tell you you can edit your payment method, but I have been through the 5 headers and there's no where at all to change it. Can anyone help please

    Where on your profile can you change your card details, got a new card and I need to apply it to my account, I have gone into profile and there is a part on one of the headers that says you can change your payment details but when you do go into it, there's nothing, nowt, nada, not a thing.
    Anybody help me please.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • Overdrive app Library changes wma to mp3 format help please

    I have iPod 5, iPad 4 and iPhone 5. I use Overdrive app to download Library ebooks and audiobooks.  Overdrive has changed from wma format to mp3 format.  Can anyone tell me how to do this? Thank you

    I am confused. You say OverDrive change the format from WMA to mp3. But then you ask how to do that?
    Do what since you said OverDrive did that?
    The iPod can't play WMA files. They have to be converted to a format compatible with the iPod.
    Itunes Help includes:
    Add items from your computer to your iTunes library
    Do either of the following:
    Drag a file or folder from the desktop to the iTunes window.If you add a folder, all the files it contains are added to your library.
    In iTunes, choose File > Add to Library, locate a file or folder, and click Open.
    By default, adding items to your iTunes library places a pointer to each file in the iTunes folder; the original file remains in the current location. For information about copying files to the iTunes folder instead of creating pointers to them, see Change where your iTunes files are stored. If the file is an unprotected WMA file and you have Windows Media Player Series 9 or later installed, iTunes makes a copy of the file and adds it to your iTunes library. The original WMA file remains unchanged. You can’t add protected WMA files or protected WMV files to iTunes.
    You can also get computer apps to do the conversion

  • How change the ncts format?help please!!!!

    PLEASE HELP ME...
    I have an american tape which is in a ncts format and I want to import it into imovie to create a movie but it doesn't work...I need to know how change to format in imovie????
    Thanks a lot for your help.

    Hello Maxime,
    is that an NTSC DV tape? is your camera NTSC or PAL? if the camera is PAL you might not be able to capture the tape, although maybe your camera allows playback on the LCD screen - also: iMovie switches the projects standard automatically when you connect the camera
    anyways...
    in iMovie select iMovie > Preferences from the menu. in the "General" tab at the bottom you'll find the voice "New project frame rate". set that to 29.97 for NTSC. Note that this will apply only for new projects, so you need to create one.
    hope this helps
    mish

  • Changing autofill to manual.  Help please!

    I cannot figure out how to take the autofill off of iTunes. I have read some stuff but can't find what they are telling to click on.
    Help?

    Did you already delete the songs from your computer?
    If not:
    1- Connect your iPod and let it do one last auto-sync.
    2- On the iPod summary page in iTunes, select the option "Manually manage music and video"
    3- Click on the "Apply" button at the bottom-right of iTunes.
    You should now be able to safely connect your iPod to your library (and any other) without it being emptied out.
    +If you have already deleted songs from your computer and your iPod is still set for auto-sync+, then your iPod will be emptied out (to match your library). So you need to prevent an auto-sync before changing to manual mode. To do that, connect your iPod to iTunes and immediately press and hold the Cntrl and Shift keys until your iPod appears in iTunes, then continue holding for a few seconds more. Be sure to hold the Cntrl and Shift keys! If you don't, your iPod will complete an auto-sync and get emptied out. Once you have the iPod recognized by iTunes, perform the 3 steps above to put it in manual.
    Just a comment -- if you're deleting the songs from your computer to save space, don't. The iPod is not meant to be the only source of your media files. All it takes is one little hiccup (which iPods can do) and all your music is lost. If space is a problem, invest in a larger hard drive or get an external drive for your computer.

  • When I change my TIFFs to jpegs, the color and tone are changing as well [was: Need help please!]

    When I change my TIFFs to jpegs, the color and tone are changing as well, any ideas as to what the problem could be?

    You are screwing up the colors by not using color management or at least not keeping an eye what color space/ profiel your source files use anbd what happens when Safe for Web converts them. As a start, perhaps refer to this, then work your way through the Internet wide and far to learn about color management:
    Common Photoshop Issues
    Mylenium

  • I need to change the hard drive, some help please ?

    My sister's G3 iBook hard drive seems to have died. She want me to replace it for her. My question, where can I get a replacement ? I know drives come in different capacities, 10, 20, 250Gigs's etc. But are all notebook drives the same physical size ? So can I buy any make to fit in the iBook, or do I have to get one from Apple ? I'm not 'IT', but work in medical physics, so getting my hands 'dirty' is not the problem.

    Well, John, I have all sorts of links for places to buy hard drives here in the U.S., but I'm not sure they would be of any help to you. You need a "Super Slim" (9.5 mm high) 2.5 inch notebook drive. You don't have to buy it from Apple. You will need to format it with the original system CD's.
    Here are a couple links, so you can print out the lists and shop locally:
    Other World Computing
    Newegg
    Online instructions:
    http://www.pbfixit.com/Guide/50.12.0.html
    http://www.powerbooktech.com/knowledge,name-Hard-Drive,type-6.htm
    Good luck.

  • Why isn't the App Store ID the same as my changed ID in Itunes?  Help please.

    I have a new email address.  I've changed my email address in Itunes and it shows the new address.  When I try to get apps from the App Store it shows my old email address and won't allow me in. Why is the Apple ID in the App store still my old one when I tunes shows my new one?
    Thanks. mpar1985

    Search before posting next time.  Questions regarding the store ID have been asked and answered dozens of times already.

  • I updated to the latest Firefox but now can't make a payment via the PC Tools site. They've given me alternative paths to their checkout but I cannot complete transaction. They have suggested there may be a setting I need change to allow this. Help?

    I am trying to renew my PC Tools Spyware and Antivirus license but when I go to their site and enter all the relevant information I cannot get past the final "Pay Now" button. The button changes colour to show it has recognised my 'click' but does not take me any further. I have conferred with their Customer Service and they have tried very hard to give alternative routes to this final transaction stage but to no avail. The last suggestion was that there may be a setting I have to change within Firefox. Anybody help please?
    I did update to the latest version of Firefox a couple of weeks ago and had no difficulties before then.

    Hi,
    You can try to access the site in a [https://support.mozilla.org/en-US/kb/Managing-profiles?s=profile&r=0&e=sph&as=s new profile]. If the problem persists you can also try to complete the transaction in Internet Explorer.
    [https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

  • Help, please! to stop animation of one symbol from anover or stage

    I'm not a great specialist in jquery, but I've had to deal with it. And have some expirience... But i can't do an elementary thing in edge animate, i guess. So, help me please!))
    I need to stop some child symbols from the timeline of parent symbol(or Stage). On the timeline of stage, i have trigger. At this moment all the child clips have to stop as one...
    I try to insert into trigger this code:
    (child clips names: 'stan', 'bizan', 'bak')
    var stantostop = sym.$("stan");
    stantostop.stop();
    var bizantostop = sym.$("bizan");
    stantostop.stop();
    var baktostop = sym.$("bak");
    stantostop.stop();
    and I'm sure, I'm doing something wrong(!!!), cause nothing changes.
    If you cant help, please advice me some source with a lot of examples of typical operations and commands like this! So thank you for reading!

    Thank you very much for your answer. I,ve started three topics before i,ve got an answer!)
    But I think I have some different problem
    It is in the organization of my clips:
    Stage->Ship_going->Ship_swinging->stan
    Stage->Ship_going->Ship_swinging->bizan
    Stage->Ship_going->Ship_swinging->bak
    Stan(and overs) are the clips wich are looped, and thats why, I think they can,t stop.
    (They are the flags of ship. And the problem is in that fact that when ship stop i want to stop all animation including the loop animation of flags, then I want to deleete all clips, but I cant delete this clips in the same way Icant stop them)
    I can show the example of my clip for you(itis rather amusing)))) and i guess you shall understand what i'm talking about)))
    Can I send you the zip with clip?
    elainefinnell wrote:
    Hi, Strashevsky-
    You don't need to refer to the jQuery object if all you want to do is stop the timeline.  You can simply do this:
    sym.getSymbol("stan").stop();
    OR
    var stantostop = sym.getSymbol("stan");
    stantostop.stop();
    Hope this helps get you pointed in the right direction!
    -Elaine

  • Camera problem in Dev Alpha C

    Hi, my Dev Alpha C Smartphone has a problem with the camera, when I open the camera says that is not possible initiate the camera, and also can't capture screens. I swipe the smartphone and change the OS to different version, but nothing happen, the camera don't respond, is impossible initiate it.
    Please can you tell me a solution?
    Thanks a lot, Carlos Longarela.

    Hi fotodng,
    I have sent you a private message with the steps you need to take regarding your Dev Alpha device.
    Let me know if you have any further questions.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Setuping BlackBerry Dev Alpha for development

    Hello,
    at first I did not know where to put this, since developer support forums are more code oriented, so I choose this forum, I hope it is okay, otherwise please move it to correct forum.
    I am trying to setup BlackBerry Dev Alpha device for development on my workstation. I am running Windows 8 Pro x64, freshly installed and I installed latest BlackBerry Development Kit and BlackBerry Device Manager. The Alpha device was updated to the latest version. Now I am having trouble connecting to the device in the IDE.
    My question is, why my PC cannot connect ot BlackBerry Dev Alpha device? IDE displays Unable to connect. Check USB cable or WiFi connection.
    The following facts are true:
    - Device is connected with normal MicroUSB cable without hubs
    - Device is detected in BlackBerry Device Manager and IP is displayed
    - Development mode is on, password is set
    - IP of  the device is 169.254.1.1, set in development mode screen (tried also another IP, no effect)
    - Target in Momentics is created manually (autodiscover does not work)
    - Windows Firewall is OFF
    - Pinging the device IP in command prompt returns no reply
    Is there something wrong with the device? Considering I cannot run camera, I might have received bad device.
    Best Regards,
    Legoless

    I got same sometime.
    I'm use action as below to solve.
    1. Check USB Cable
    2. Check Device in Device Manager , you may found UNKNOW Device or device with   yellow "!" sign.
    3.  Remove all unknow device.
    4,  unplug USB Cable and re-plug again
    5.  try detect hardware by scan hardware,
    6, If device not complete ,  Try force install device driver for new hardware that you computer found.
    Hope it help.  
    Sorry for my English.   
    If it helped please click LIKE  for me.
    Thank.
    Tamamaxx

  • Q 10 DEV ALPHA SEVER PROBLEM

    I have Q 10, and its Model Number is Dev Alpha and it is imported from UK and i am using this in Pakistan.
    There is a strange issue that it has missing;
    Docs to go
    Movie Maker
    Pictures
    Players
    and few more
    I cant even able to see blackberry protect ...
    it is running with 10.0.0.341 OS, can some one help that why i cant able to see these features in my BB

    To load stock OS (last resort)
    If for some reason the above steps don't work using BlackBerry Link you can always reload the OS using Internet Explorer. These steps are a bit trickier so read through and make sure you understand everything before you get started.
    - Make sure you don't have any BlackBerry software running on your PC (BlackBerry Link and BlackBerry Desktop Software)
    - Detach all BlackBerry smartphones, including the BlackBerry 10 device that you are going to restore.
    - Using Internet Explorer navigate to www.BlackBerry.com/updates then scroll down the page and select the Check for Updates button.
    - Connect the BlackBerry 10 device you want to restore
    - Hold the power button for 10 seconds until the device turns off, then press the power button again so it turns on.
    - A prompt will appear and the BlackBerry smartphone will show in the drop down list on your PC shortly after the LED lights up (it could show up as USB: UNKNOWN or USB: BlackBerry (PIN) – both are normal/fine).
    - Click the OK Button as soon as it becomes enabled - you only have a few seconds to do this!
    - Once the above steps are completed successfully a dialog will be displayed stating Checking for BlackBerry Device Software updates
    - Your device power itself off after two minutes. Shortly after, the device LED should turn green.
    - Continue to wait after the LED turns green and you will be prompted to install BlackBerry Device Software. Follow the prompts to install the BlackBerry Software and finish the software installation
    Note: You need to be running windows again for this.

  • Q10 10.2.1 OS on a Dev Alpha C?

    Hello,
    I would like to use the "full" 10.2.1 OS release of the Q10 on my Dev Alpha C and not just the Developer OS version of it.
    Would the full Q10 OS work on a DAC?
    If so, where can I download it?

    Yes, two ways.
    I would recommend using the Sachesi install process here.
    Upgrading BB10 OS Using Sachesi
    You can also use this:
    Upgrading OS10 devices using Autoloader
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for