/dev/input/mice?

How to get /dev/input/mice device in /dev? I untagged the following lines in /etc/devfsd.conf but doesn't appear.
## Uncomment this to manage USB mouse
# REGISTER        ^input/mouse0$        CFUNCTION GLOBAL mksymlink $devname usbmouse
# UNREGISTER        ^input/mouse0$        CFUNCTION GLOBAL unlink usbmouse
REGISTER        ^input/mice$    CFUNCTION GLOBAL mksymlink $devname usbmouse
UNREGISTER        ^input/mice$    CFUNCTION GLOBAL unlink usbmouse

sarah31 wrote:did you restart the devfs PID ?
/input/mice doesn't appear by re-booting the computer, so how to do it (devfsd ???)?
My experimental hardware detect recognizes the USB mouse and temporary adds the /input/mice in /dev. To run the USB mouse on next boot without hwd, I will have to add the daemon (or whatever) in /etc/rc.local?
For your information (sarah31), I am removing the auto setup options from the hwd. The aim is to make the hwd package to detect only and provide info how to do it manually. Not to install any configs. The aim basis what we said on topic:
http://bbs.archlinux.org/viewtopic.php?t=486

Similar Messages

  • [solved] Set /dev/input/mouse* permission via udev

    Hi, there!
    I have the same problem described here: https://bbs.archlinux.org/viewtopic.php?id=107707
    I also tried to use his udev rules:
    KERNEL=="event?", NAME="input/%k", MODE=660, GROUP="mouse"
    KERNEL=="mouse?", NAME="input/%k", MODE=660, GROUP="mouse"
    KERNEL=="mice", NAME="input/%k", MODE=660, GROUP="mouse"
    But it doesn't work. I saved the rule to "/etc/udev/rules.d/76-mouse.rules" and got this after reboot:
    ls -lisa /dev/input/mouse*
    7974 0 crw-r----- 1 root root 13, 32 24. Jan 10:53 /dev/input/mouse0
    7979 0 crw-r----- 1 root root 13, 33 24. Jan 10:53 /dev/input/mouse1
    9026 0 crw-r----- 1 root root 13, 34 24. Jan 10:53 /dev/input/mouse2
    9028 0 crw-r----- 1 root root 13, 35 24. Jan 10:53 /dev/input/mouse3
    Has anyone an idea how to get the rule working?
    Regards,
    Maribu
    Last edited by maribu8789 (2013-07-30 10:38:57)

    Hi, again!
    I finally got it working:
    $ cat /usr/lib/udev/rules.d/12-mouse.rules
    KERNEL=="mouse?", GROUP="mouse", MODE="660"
    KERNEL=="mice", GROUP="mouse", MODE="660"
    KERNEL=="event?", GROUP="mouse", MODE="660"
    Make sure you name it 12-mouse.rules. I think the high priority (the low number at the beginning) is needed to get it working.
    Regrads,
    Maribu

  • Gridwars settings reset on close + ln -s /dev/input/js0 /dev/js0

    I installed gridwars from aur on x86-64. I also installed the entire lib32 group (although that was for various reasons not only gridwars). Everything seems fine except every time I close the game my high score and my configurations get reset. I was just wondering why this is happening and what I can do to fix it.
    Also the only way to make my gamepad work with gridwars is if I link /dev/input/js0 to /dev/js0, but every time I reboot I have to do it all over again. How could I fix this? I assume there must be a way to make the game use /dev/input/js0 instead, I just don't know where to start.

    Nothing?

  • Audio issue with A605, RE: Input/mic monitor

    I recently purchased a Portege A605-200, with Realtek HD audio and Vista.
    Trying to solve a problem that I've found, in my several days of research, seems quite common with Realtek.  Simply, I cannot monitor my microphone input, realtime, through my headset or onboard speakers.  I can record fine, I just can't hear my voice, as you would be able to in any studio recording environment. This is a feature I need desperately, due to conference call recordings I make, via Skype, and realtime backup recordings I must make to Mini Disk.
    Many solutions I've seen on the net require a registry edit, but I've not found one that works for me.  Not afraid of the registry, just can't find the right edit.
    Things get bleaker as I quote a Realtek technician (level one?) who wrote after several emails back-and-forth:  "I'm sorry. The Microphone A-A Path function had been removed from your system . This is TOSHIBA requirement . So, you can not hear the microphone sound immediately.  Best regards, PC-Tech AT ."
    And I'm wondering "What the heck is the 'A-A Path function'"?  Hardware/wiring issue?  Software?  Something to do with preventing feedback due to the onboard mic and speakers?   Registry edit solution?  Vista issue (never happened with XP)?  Heck if I know.
    I'm at a total loss and quite weary. I'm considering buying a Cakewalk Roland UA-1G USB Audio Interface or some other audio interface to replace the onboard audio.  What else can I do?
    Would NEVER have bought this computer had I suspected it would be impossible to record and monitor the mic input, as I have been able to do with every other computer I've ever had.  I'm just praying somebody can save me some grief and money and provide a solution or suggestion. 
    Thanks much for reading this.
    Rick L.
    PS  Updated the bios and loaded up the latest drivers from Realtek and Vista SP2.  No luck.

    No, I am using my Roland VS 1680. I am inputting audio from this recording unit to final cut using firewire. I can see the volume meter reading the input signal and when I capture, I actually record it onto final cut. Playback after capture is fine.
    The issue is that I am unable to preview my audio stream through the speakers. I have gone to preferences on the apple menu checked off my input as firewire and output as built in audio.
    I have noticed in my LOG AND CAPTURE screen (clip settings) the PREVIEW box is dark and not allowing me to check this off. I am assuming this might be why I cant preview audio.

  • Realtek HD Audio: Output:OK, Input (Mic): NOT WORKING??!?!?!?!?!?!?

    Hi guys,
    I am going to tell you and ask for your advice the wierdest thing happens to my 14-month old Pavilion 6300 series:
    - The PC has Realtek HD Audio built-in (on-board) and having the latest driver (I downloaded off from realtek.tw, latest is 5.10.0.5874)
    - Before I installed that Realtek driver, I had installed Microsoft UAA Bus driver for HD Audio (version 5.10.0.5010)
    - I am running Windows XP Professional SP3
    When I plug in a headset (with mic of course, for skype), strange things start like this:
    1. I can hear the output sound, the jack can detect which plug I plug in
    2. But the INPUT (back or front) which is in my case, the MIC, DOES NOT WORK AT ALL.... Jeeze, it drives me NUT!!!
    3. I have turned on ALL the volume related to "MIC" but to no avail. Even the Recording mic volume is grey-out... really no-hope?
    4. I did the Hardware test, it could not detect the mic (no movement from the sound bar)
    5. The headset works well on other machine!!!!
    Can somebody tell me that the onboard card got a problem and I have to buy another card???
    Thanks a lot in advance guys, really
    James
    Message Edited by Jamesnb on 06-26-2009 12:19 PM

    now what you can try is can try to test the MotherBoard once and if there is any issue with the onboard card then you have to replace the card.
    if there is no issues with the MotherBoard then try entering device manager in safemode and uninstall the drivers once and check if its working.

  • Iphone input mic-olume spectrum

    I'd appreciate any expert's help,
    I'm trying to trigger an event when a user stops speaking.
    My approach is to trace a single input audio volume-level integer and to measure it through time.
    I've looked into the aurioTouch and speakHere example.
    The first utilize an FFT buffer which get parsed every time it is fills - i couldn't see how to determine the volume of the speech from it. The second doesn't do any sound analysis.
    Do you know of a way?
    Is there a mic-incoming-sound-level hidden var?

    If you are still having the problem, this might help.
    I just ran into the problem and it turned out to be lint ....
    http://discussions.apple.com/message.jspa?messageID=9128049#9128049

  • I want to expand analog inputs (mic)

    Hi all!
    I need for a new project more analog mic inputs (incl. phantom power)
    With logic I use the motu 828. I want to use the adat input for extra analog inputs. Can one of you give me some advice which converters there on the market. I know there is a converter from behringer the ADA8000, but several people told me that the pre-amps of this unit are not very good.
    So which converter will work with the motu and logic.
    Thanks and warm regards
    jasja

    Mackie, Presonus and Focusrite all have great products that'll give you 8 channels of pres to ADAT. If you want something cheaper, M-Audio also has one.

  • Any success using 2 input mics at same time on a M...

    I set up an aggregate device successfully (from ios, applications/audio midi setup). Skype even recognizes it, but does not pick up both usb headset mics (or speakers). Really need to pipe in 2 headsets to one Mac, so we can talk to whom we call.

    Hi Uday,
    Do those 2 values have some relation, like if you want the user to enter a month and then get data for the previous month also, then you can use one variable and an offset (here -1)
    Hope this helps...

  • Xorg disables keyboard and mice [solved]

    after last update I cant use the trackpoint and keyboard on my IBM T40 under x, only the touchpad works.
    here is my xorg.conf
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    # Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    Section "InputDevice"
    Identifier "SynapticsMouse1"
    Driver "synaptics"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "MinSpeed" "0.09"
    Option "MaxSpeed" "0.18"
    Option "BottomEdge" "4200"
    Option "SHMConfig" "on"
    Option "FingerLow" "25"
    Option "LeftEdge" "1700"
    Option "MaxTapMove" "220"
    Option "MaxTapTime" "180"
    Option "FingerHigh" "30"
    Option "VertScrollDelta" "100"
    Option "TopEdge" "1700"
    Option "AccelFactor" "0.0015"
    Option "RightEdge" "5300"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "My Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 31.5, 35.15, 35.5
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-70
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    #Section "Device"
    # Identifier "Standard VGA"
    # VendorName "Unknown"
    # BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    ## Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    #EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "** ATI Radeon (generic) [radeon]"
    Driver "radeon"
    Option "DynamicClocks" "on"
    Option "AGPMode" "4"
    Option "RenderAccel" "on"
    Option "EnablePageFlip" "on"
    Option "BIOSHotkeys" "on"
    #VideoRam 65536
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "** ATI Radeon (generic) [radeon]"
    Monitor "My Monitor"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "SynapticsMouse1" "AlwaysCore"
    EndSection
    # Section "DRI"
    # InputDevice "SynapticsMouse1" "AlwaysCore"
    # Mode 0666
    # EndSection
    and the Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH i686
    Current Operating System: Linux t40 2.6.28-ARCH #1 SMP PREEMPT Tue Jan 6 10:26:22 UTC 2009 i686
    Build Date: 17 December 2008 08:20:05PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 12 13:04:51 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "My Monitor"
    (**) | |-->Device "** ATI Radeon (generic) [radeon]"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) |-->Input Device "SynapticsMouse1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x81d5fe0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] rev 0, Mem @ 0xe0000000/0, 0xc0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 6.9.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon RV730 (AGP),
    ATI Radeon RV730 (AGP), ATI RV730XT [Radeon HD 4670],
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
    ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3430, ATI FireMV 2450, ATI FireMV 2260,
    ATI FireMV 2260, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics
    (II) Primary Device is: PCI 01@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) RADEON(0): TOTO SAYS 00000000c0100000
    (II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "AGPMode" "4"
    (**) RADEON(0): Option "EnablePageFlip" "on"
    (**) RADEON(0): Option "RenderAccel" "on"
    (**) RADEON(0): Option "DynamicClocks" "on"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon Mobility M7 LW (AGP)" (ChipID = 0x4c57)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
    (**) RADEON(0): Page Flipping enabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=32768K, accessible=65536K (PCI BAR=131072K)
    (--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2048x1200
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 12000, max_out_pll: 35000, min_in_pll: 40, max_in_pll: 3000, xclk: 18300, sclk: 183.000000, mclk: 260.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
    (II) RADEON(0): Bios Connector table:
    (II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
    (II) RADEON(0): Port1: DDCType-0x64, DACType-2, TMDSType-1, ConnectorType-3
    (II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
    (II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
    (II) RADEON(0): Output VGA-0 using monitor section My Monitor
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): DFP table revision: 2
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): Panel ID string: 1024x768
    (II) RADEON(0): Panel Size from BIOS: 1024x768
    (II) RADEON(0): BIOS provided dividers will be used.
    (WW) RADEON(0): LVDS Info:
    XRes: 1024, YRes: 768, DotClock: 65000
    HBlank: 320, HOverPlus: 16, HSyncWidth: 136
    VBlank: 38, VOverPlus: 2, VSyncWidth: 6
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: NTSC
    (II) RADEON(0): TV standards supported by chip: NTSC PAL NTSC-J
    (II) RADEON(0): Port0:
    Monitor -- AUTO
    Connector -- VGA
    DAC Type -- Primary
    TMDS Type -- None
    DDC Type -- 0x60
    (II) RADEON(0): Port1:
    Monitor -- AUTO
    Connector -- DVI-D
    DAC Type -- None
    TMDS Type -- Internal
    DDC Type -- 0x64
    (II) RADEON(0): Port2:
    Monitor -- AUTO
    Connector -- LVDS
    DAC Type -- None
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): Port3:
    Monitor -- AUTO
    Connector -- STV
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- None
    DDC Type -- 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    finished output detect: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 3
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1024x768
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.2.1
    ABI class: X.Org Video Driver, version 4.1
    (==) RADEON(0): Assuming overlay scaler buffer width is 1536
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    (II) RADEON(0): Dynamic Clock Scaling Enabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x04000000
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 8 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 5 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
    (II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
    (II) RADEON(0): Largest offscreen area available: 1024 x 7165
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x800000
    (II) RADEON(0): Will use depth buffer at offset 0xc00000
    (II) RADEON(0): Will use 16384 kb for textures at offset 0x1000000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (**) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x4c57]
    (II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xd0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb5856000
    (II) RADEON(0): [agp] ring read ptr handle = 0xd0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb803d000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5656000
    (II) RADEON(0): [agp] GART texture map handle = 0xd0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xb5176000
    (II) RADEON(0): [drm] register handle = 0xc0100000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0x1fff0000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 11
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xe3ffe000 is: 0xe3ffe000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xd07fd000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (II) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
    (II) RADEON(0): Largest offscreen area available: 1024 x 7157
    (II) RADEON(0): Detected Radeon Mobility M7, disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    init memmap
    init common
    init crtc1
    init pll1
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xe3ffe000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0xd07fd000
    restore common
    restore crtc1
    restore pll1
    restore LVDS
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (WW) RADEON(0): Option "BIOSHotkeys" is not used
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/radeon_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (II) Synaptics touchpad driver version 0.99.3
    (--) SynapticsMouse1 auto-dev sets device to /dev/input/event8
    (**) Option "Device" "/dev/input/event8"
    (II) SynapticsMouse1: x-axis range 1472 - 5472
    (II) SynapticsMouse1: y-axis range 1408 - 4448
    (II) SynapticsMouse1: pressure range 0 - 255
    (II) SynapticsMouse1: finger width range 0 - 0
    (II) SynapticsMouse1: buttons: left right middle double triple
    (**) Option "SHMConfig" "on"
    (**) Option "LeftEdge" "1700"
    (**) Option "RightEdge" "5300"
    (**) Option "TopEdge" "1700"
    (**) Option "BottomEdge" "4200"
    (**) Option "FingerLow" "25"
    (**) Option "FingerHigh" "30"
    (**) Option "MaxTapTime" "180"
    (**) Option "MaxTapMove" "220"
    (**) Option "VertScrollDelta" "100"
    (--) SynapticsMouse1 touchpad found
    (**) Option "AlwaysCore"
    (**) SynapticsMouse1: always reports core events
    (II) evaluating device (SynapticsMouse1)
    (II) XINPUT: Adding extended input device "SynapticsMouse1" (type: TOUCHPAD)
    (--) SynapticsMouse1 touchpad found
    (II) RADEON(0): Damage tracking initialized for page flipping
    (EE) config/hal: couldn't initialise context: (null) ((null))
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:ddc2" removed.
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:ddc2" removed.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
    in RADEONProbeOutputModes
    (II) RADEON(0): Added native panel mode: 1024x768
    (WW) RADEON(0): Mode 1280x1024 is out of range.
    (WW) RADEON(0): Valid FP modes must be between 320x200-1024x768
    (II) RADEON(0): Adding Screen mode: 800x600
    (II) RADEON(0): Adding Screen mode: 640x480
    (II) RADEON(0): Total number of valid Screen mode(s) added: 2
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) UnloadModule: "synaptics"
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x1fff0000 0xe3ffe000
    (II) RADEON(0): MC_AGP_LOCATION : 0x27ff2000
    finished PLL2
    Entering Restore TV
    Restore TV PLL
    Restore TVHV
    Restore TV Restarts
    Restore Timing Tables
    Restore TV standard
    Leaving Restore TV
    (II) RADEON(0): [drm] removed 1 reserved context for kernel
    (II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf8046000 at 0xb803e000
    (II) RADEON(0): [drm] Closed DRM master.
    Last edited by eg4matze (2009-01-12 12:47:16)

    hal couldnt start, I rebuild it with abs, now everything works

  • No sound other than directly from built-in mic.

    Hello there!
    I've got a problem... I'm using Arch with GNOME 3 and I have a weird problem. My sound is gone. alsamixer doesn't affect the sound at all and Gnome's volume manager (or whatever it's called) doesnt have any sound output (only Dummy - or something similiar, I'm translating from polish interface). But I hear my mic (very loud). I don't even know where to start diagnosing this problem and would be very, very grateful If you'd help me or just point me out the right direction.
    Cheers!
    Last edited by turekpolski (2011-10-27 17:01:46)

    Alsamixer at HDA Intel said, that there are no controls for this device. And as I've mentioned before... everything used to work, and it was possible to 'tune' levels in alsamixer.
    It turned out, that I've got a second laptop (both Toshiba Satellite) which has the same problem. Sound used to work, but now it's gone. Even alsaconf said, there are no sound cards in there. I've found a similiar (quite) problem in here:
    https://bbs.archlinux.org/viewtopic.php?id=26685
    But nothing helped.
    Here are my results:
    # hwd -s
    Kernel : 3.0-ARCH
    CPU & Cache: Processor 0: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz 1995MHz, 1024 KB Cache
    Processor 1: Pentium(R) Dual-Core CPU T4200 @ 2.00GHz 1995MHz, 1024 KB Cache
    Sound(a) : 82801I ICH9 Family HD Audio Controller module: snd-hda-intel
    Video : Mobile 4 Series Chipset Integrated Graphics Controller server: Xorg (vesa)
    Driver : xf86-video-vesa module: -
    Monitor : Generic Monitor H: 28.0-96.0kHz V: 50.0-75.0Hz
    Mouse : Touch Pad xtype: IMPS2 device: /dev/input/mice
    USB2 : 82801I ICH9 Family USB2 EHCI Controller #1 module: ehci_hcd
    Ethernet : RTL8101E/RTL8102E PCI Express Fast Ethernet controller module: r8169
    Ethernet : AR242x / AR542x Wireless Network Adapter PCIExpress module: ath5k
    Network : No wireless card
    Menu : Main menu: hwd
    All : Detect all hardwares: hwd -e
    X sample : Generate X sample: hwd -x
    # lsmod | grep snd
    snd_hda_intel 22122 0
    snd_hda_codec 77927 1 snd_hda_intel
    snd_hwdep 6325 1 snd_hda_codec
    snd_pcm 73952 2 snd_hda_intel,snd_hda_codec
    snd_timer 19416 1 snd_pcm
    snd 57818 5 snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 6146 1 snd
    snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
    # ls -l /dev/snd
    drwxr-xr-x 2 root root 60 10-31 11:05 by-path
    crw-rw----+ 1 root audio 116, 3 10-31 11:05 controlC0
    crw-rw----+ 1 root audio 116, 2 10-31 11:05 hwC0D1
    crw-rw---- 1 root audio 116, 1 10-31 11:05 seq
    crw-rw----+ 1 root audio 116, 33 10-31 11:05 timer
    I am stuck... Any ideas?
    Last edited by turekpolski (2011-10-31 09:25:41)

  • Systemd experience, or "Of Mice and Mounts"

    I cutover to systemd.  Here are my experiences, for better or for worse.  Maybe it will help someone. 
    The wiki's systemd migration page is very good!  I followed it, yet ran into a few problems outside the scope of the page.  I should add here that I want to run in a mixed initscripts/systemd environment fo ease my migration, as the wiki suggests.  My system is a home server, and for external access I run only ssh.
    Mounts -- Systemd hung trying to mount all my drives according to /etc/fstab, especially my ipod. 
    I changed most of them to "noauto" then I was ok.
    Mouse woudn't work under X windows.
    Looks like it was enumerated as /dev/input/mice not /dev/input/mouse0 as before.  Added "mice" as a section in /etc/X11/xorg.conf and then it was fine.
    Netcfg under systemd renamed my two ethernet interfaces from wan and house to wan0 and house0. 
    Ok, this wasn't a problem, but it's not what I expected.
    Cups wouldn't start. 
    I googled and found someone else on the net had this same problem; he replaced the cupsd.socket file and it worked for him.  It also worked for me.
    Postgrey wouldn't start.  It turns out that the postgrey.service file ignores the POSTGREY_ADDR variable in /etc/conf.d/postgrey, so it wasn't starting on the socket which I wanted it to, but on a hard-coded port number.  Oh well. 
    So as I had done for cups, I cloned the default postgrey.service tile in /usr/lib/systemd/system to /etc/systemd/system, and removed the hardcoded port.  Also had to "reenable" the service to make it pick up the new service file.  Now it picks up /etc/conf.d/postgrey as I think it should.
    SSH -- I have it running on a port other than the default. 
    Again, I cloned the sshd.socket file, changed the port, restarted it, and now it's ok.
    Samba is started as a legacy service.  Others are too, probably, like dhcp4.  I suppose I'll have to eventually change the legacy samba service into smbd and nmbd like the old days.
    Laptop -- Cutover to systemd on it too.  Had a few problems like these above, but that's ancient history now (last week!)  What I do like is that the power management functions work better now.  It doesn't always wake up well from sleeping, but I suppose I'll figure that out someday too.
    Last edited by jimbeam (2012-11-10 00:20:53)

    Is there a topic here?
    This seems like it should go to your blog not on the forums.

  • Using two mice simultaneously

    I work on a laptop and HATE using the touchpad,  so whenever I am docked I like to use a
    mouse. I have a lLgitech G5 and a Synaptics touchpad and have attempted to configure them
    with various xorg settings. This used to work for me with xorg 7.1, but now I've updated
    to 7.3 and this is broken. My touchpad works, but the G5 does nothing, although it is
    recognized and therefor I think I have configured it wrong. Also, both the touchpad and
    the G5 work simultaneously without any fancy configuration, but then I do not get a
    scroll thingy on the toughpad and all the buttons on the G5 do not function.
    Here is my xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Mouse1" "AlwaysCore"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "GLcore"
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "record"
    Load "xtrap"
    Load "freetype"
    Load "type1"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse0"
    # Driver "mouse"
    # Option "Protocol" "auto"
    # Option "Device" "/dev/input/mice"
    # Option "ZAxisMapping" "4 5 6 7"
    #EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "synaptics"
    Option "CorePointer"
    Option "Protocol" "auto-dev"
    Option "Device" "/dev/input/mice"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5400"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4400"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "180"
    Option "MaxTapMove" "220"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.12"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0"
    Option "SHMConfig" "on"
    EndSection
    Section "InputDevice"
    Identifier "Mouse1"
    Driver "evdev"
    Option "Name" "Logitech USB Gaming Mouse"
    Option "ZAxisMapping" "4 5 7 6"
    Option "Emulate3Buttons" "false"
    EndSection
    Section "Monitor"
    #DisplaySize 330 210 # mm
    Identifier "Monitor0"
    VendorName "AUO"
    ModelName "2174"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "ColorKey" # <i>
    #Option "CacheLines" # <i>
    #Option "Dac6Bit" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "NoDDC" # [<bool>]
    #Option "ShowCache" # [<bool>]
    #Option "XvMCSurfaces" # <i>
    #Option "PageFlip" # [<bool>]
    Identifier "Card0"
    Driver "intel"
    VendorName "Intel Corporation"
    BoardName "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
    BusID "PCI:0:2:0"
    Option "DRI" "True"
    Option "PageFlip" "True"
    Option "XvMCSurfaces" "True"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection

    Section "ServerLayout"
        Identifier  "Simple Layout"
        Screen "Screen 1"
        InputDevice "Mouse1" "SendCoreEvents"
        InputDevice "Mouse0" "CorePointer"
        InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    thats how I did it on my slacktop
    btw I'm new to arch.. great distro so far.

  • Xf86-input-synaptics 99.1-1

    The update to xf86-input-synaptics 99.1-1 breaks something, and no longer recognises tapping or scrolling.
    I was unable to diagnose the problem (I'm in English class =P) so I just downgraded to 15.2-1.
    For some reason the update was in the extra repositories, instead of testing..

    I had the same problem. I found the answer in the wiki.
    New xorg disables sidescrolling and tapping by default.
    Remove whatever you have in your xorg.conf about synaptics and add this to it. I have the two lines relating to two finger scrolling commented out because you are probbably not used to two finger scrolling if you want sidescrolling. Uncomment them if you see fit.
    Section "InputDevice"
    Identifier "SynapticsTouchpad"
    Driver "synaptics"
    Option "AlwaysCore" "true" # send events to CorePointer
    #Option "Device" "/dev/input/mice"
    Option "Device" "/dev/psaux"
    Option "Protocol" "auto-dev"
    Option "SHMConfig" "false" # configurable at runtime? security risk
    Option "LeftEdge" "1700" # x coord left
    Option "RightEdge" "5300" # x coord right
    Option "TopEdge" "1700" # y coord top
    Option "BottomEdge" "4200" # y coord bottom
    Option "FingerLow" "25" # pressure below this level triggers release
    Option "FingerHigh" "30" # pressure above this level triggers touch
    Option "MaxTapTime" "180" # max time in ms for detecting tap
    Option "VertEdgeScroll" "true" # enable vertical scroll zone
    Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
    Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
    Option "CoastingSpeed" "0.30" # corner coasting speed
    Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
    Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
    Option "MinSpeed" "0.10" # speed factor for low pointer movement
    Option "MaxSpeed" "0.60" # maximum speed factor for fast pointer movement
    Option "AccelFactor" "0.0020" # acceleration factor for normal pointer movements
    #Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
    #Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    EndSection
    EDIT: Oh yeah, this works for me, but this may not be the smartest way to do it. This post describes an alternate method:
    http://bbs.archlinux.org/viewtopic.php? … 88#p456488
    I'm too lazy to do it, but this method is better since it works with the new hotplug feature in xorg. You could read the wiki page about it if you want.
    Last edited by sokuban (2008-12-02 03:24:33)

  • VMWare Workstation 11 - No keyboard input in Xorg

    Hi.
    Mouse is working fine, video works fine, keyboard does not.
    It's a weird error which everyone appears to solve by doing "hwd -x" whatever that does?
    It's on a laptop if that matters, i've installed:
    * xf86-input-keyboard
    * xf86-input-vmmouse
    * xf86-video-vmware
    * mesa
    * open-vm-tools
    * xorg-server
    * xorg-xinit
    Here's my log:
    [ 258.262]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 258.262] X Protocol Version 11, Revision 0
    [ 258.262] Build Operating System: Linux 3.19.2-1-ARCH i686
    [ 258.262] Current Operating System: Linux Victim1 4.0.4-2-ARCH #1 SMP PREEMPT Fri May 22 03:19:32 UTC 2015 i686
    [ 258.262] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ca405305-cd87-4252-8c47-0936d5162b98 rw quiet
    [ 258.262] Build Date: 14 April 2015 10:36:09AM
    [ 258.262]
    [ 258.262] Current version of pixman: 0.32.6
    [ 258.262] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 258.262] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 258.262] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 4 12:18:04 2015
    [ 258.265] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 258.265] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 258.268] (==) ServerLayout "X.org Configured"
    [ 258.268] (**) |-->Screen "Screen0" (0)
    [ 258.268] (**) | |-->Monitor "Monitor0"
    [ 258.268] (**) | |-->Device "Card0"
    [ 258.268] (**) |-->Input Device "Mouse0"
    [ 258.268] (**) |-->Input Device "Keyboard0"
    [ 258.268] (==) Automatically adding devices
    [ 258.268] (==) Automatically enabling devices
    [ 258.268] (==) Automatically adding GPU devices
    [ 258.270] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 258.270] Entry deleted from font path.
    [ 258.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 258.271] Entry deleted from font path.
    [ 258.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 258.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 258.271] Entry deleted from font path.
    [ 258.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 258.271] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 258.271] Entry deleted from font path.
    [ 258.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 258.271] Entry deleted from font path.
    [ 258.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 258.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 258.271] Entry deleted from font path.
    [ 258.271] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 258.271] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/
    [ 258.271] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 258.271] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 258.271] (WW) Disabling Mouse0
    [ 258.271] (WW) Disabling Keyboard0
    [ 258.272] (II) Loader magic: 0x829e700
    [ 258.272] (II) Module ABI versions:
    [ 258.272] X.Org ANSI C Emulation: 0.4
    [ 258.272] X.Org Video Driver: 19.0
    [ 258.272] X.Org XInput driver : 21.0
    [ 258.272] X.Org Server Extension : 9.0
    [ 258.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 258.274] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 258.274] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 258.282] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
    [ 258.282] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 258.283] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 258.283] (II) LoadModule: "glx"
    [ 258.284] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 258.303] (II) Module glx: vendor="X.Org Foundation"
    [ 258.303] compiled for 1.17.1, module version = 1.0.0
    [ 258.303] ABI class: X.Org Server Extension, version 9.0
    [ 258.303] (==) AIGLX enabled
    [ 258.303] (II) LoadModule: "vmware"
    [ 258.303] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
    [ 258.380] (II) Module vmware: vendor="X.Org Foundation"
    [ 258.380] compiled for 1.17.0, module version = 13.1.0
    [ 258.380] Module class: X.Org Video Driver
    [ 258.380] ABI class: X.Org Video Driver, version 19.0
    [ 258.380] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
    [ 258.380] (--) using VT number 2
    [ 258.383] (--) vmware(0): DRM driver version is 2.6.1
    [ 258.383] (EE) vmware(0): Failed to detect device screen object capability.
    [ 258.383] (WW) vmware(0): Disabling 3D support.
    [ 258.383] (WW) vmware(0): Disabling Render Acceleration.
    [ 258.383] (WW) vmware(0): Disabling RandR12+ support.
    [ 258.383] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
    [ 258.383] (II) Loading sub module "vgahw"
    [ 258.383] (II) LoadModule: "vgahw"
    [ 258.383] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 258.384] (II) Module vgahw: vendor="X.Org Foundation"
    [ 258.384] compiled for 1.17.1, module version = 0.1.0
    [ 258.384] ABI class: X.Org Video Driver, version 19.0
    [ 258.429] (--) vmware(0): caps: 0x0DFFC3E2
    [ 258.429] (--) vmware(0): depth: 24
    [ 258.429] (--) vmware(0): bpp: 32
    [ 258.429] (--) vmware(0): vram: 46137344
    [ 258.429] (--) vmware(0): pbase: 0xe8000000
    [ 258.429] (--) vmware(0): mwidt: 3840
    [ 258.429] (--) vmware(0): mheig: 2820
    [ 258.429] (--) vmware(0): depth: 24
    [ 258.429] (--) vmware(0): bpp: 32
    [ 258.429] (--) vmware(0): w.red: 8
    [ 258.429] (--) vmware(0): w.grn: 8
    [ 258.429] (--) vmware(0): w.blu: 8
    [ 258.429] (--) vmware(0): vis: 4
    [ 258.429] (==) vmware(0): Depth 24, (==) framebuffer bpp 32
    [ 258.429] (==) vmware(0): RGB weight 888
    [ 258.429] (==) vmware(0): Default visual is TrueColor
    [ 258.429] (==) vmware(0): Using HW cursor
    [ 258.429] (==) vmware(0): Will set up a driver mode with dimensions 800x600.
    [ 258.429] (==) vmware(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 258.429] (II) vmware(0): Clock range: 0.00 to 400000.00 MHz
    [ 258.430] (II) vmware(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "1024x768i" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "512x384i" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    [ 258.430] (II) vmware(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    [ 258.430] (**) vmware(0): Virtual size is 800x600 (pitch 3840)
    [ 258.430] (**) vmware(0): *Driver mode "vmwlegacy-default-800x600": 36.3 MHz, 36.2 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "vmwlegacy-default-800x600"x60.0 36.25 800 801 802 1002 600 601 602 603 (36.2 kHz ez)
    [ 258.430] (**) vmware(0): Default mode "2048x1536": 388.0 MHz, 137.0 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "2048x1536"x85.0 388.04 2048 2216 2440 2832 1536 1537 1540 1612 -hsync +vsync (137.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "2048x1536": 340.5 MHz, 120.2 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "2048x1536"x75.0 340.48 2048 2216 2440 2832 1536 1537 1540 1603 -hsync +vsync (120.2 kHz d)
    [ 258.430] (**) vmware(0): Default mode "2048x1536": 266.9 MHz, 95.3 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "2048x1536"x60.0 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1920x1440": 341.4 MHz, 128.5 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1920x1440"x85.0 341.35 1920 2072 2288 2656 1440 1441 1444 1512 -hsync +vsync (128.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1920x1440": 297.0 MHz, 112.5 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1920x1440"x75.0 297.00 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync (112.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1920x1440": 234.0 MHz, 90.0 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1856x1392": 288.0 MHz, 112.5 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1856x1392"x75.0 288.00 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync (112.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1856x1392": 218.3 MHz, 86.4 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1856x1392"x60.0 218.30 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1792x1344": 261.0 MHz, 106.3 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1792x1344"x75.0 261.00 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync (106.3 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1792x1344": 204.8 MHz, 83.7 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1792x1344"x60.0 204.80 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1600x1200": 229.5 MHz, 106.2 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1600x1200"x85.0 229.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (106.2 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1600x1200": 189.0 MHz, 87.5 kHz, 70.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1600x1200"x70.0 189.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (87.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1600x1200": 175.5 MHz, 81.2 kHz, 65.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1600x1200": 162.0 MHz, 75.0 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
    [ 258.430] (II) vmware(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
    [ 258.430] (II) vmware(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
    [ 258.430] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 258.430] (**) vmware(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    [ 258.430] (II) vmware(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
    [ 258.430] (**) vmware(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
    [ 258.430] (II) vmware(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz d)
    [ 258.430] (**) vmware(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
    [ 258.430] (II) vmware(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
    [ 258.430] (**) vmware(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    [ 258.430] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
    [ 258.430] (II) vmware(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    [ 258.430] (II) vmware(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
    [ 258.430] (II) vmware(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
    [ 258.430] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 258.430] (**) vmware(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
    [ 258.430] (II) vmware(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
    [ 258.430] (II) vmware(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz d)
    [ 258.430] (**) vmware(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
    [ 258.430] (II) vmware(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz d)
    [ 258.430] (==) vmware(0): DPI set to (96, 96)
    [ 258.430] (II) Loading sub module "fb"
    [ 258.430] (II) LoadModule: "fb"
    [ 258.430] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 258.432] (II) Module fb: vendor="X.Org Foundation"
    [ 258.432] compiled for 1.17.1, module version = 1.0.0
    [ 258.432] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 258.432] (II) Loading sub module "shadowfb"
    [ 258.432] (II) LoadModule: "shadowfb"
    [ 258.432] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 258.432] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 258.432] compiled for 1.17.1, module version = 1.0.0
    [ 258.432] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 258.432] (II) Loading sub module "ramdac"
    [ 258.432] (II) LoadModule: "ramdac"
    [ 258.432] (II) Module "ramdac" already built-in
    [ 258.432] (--) Depth 24 pixmap format is 32 bpp
    [ 258.433] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
    [ 258.433] (II) vmware(0): Initialized VMware Xinerama extension.
    [ 258.433] (II) vmware(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
    [ 258.506] (==) vmware(0): Backing store enabled
    [ 258.506] (==) vmware(0): Silken mouse enabled
    [ 258.508] (II) vmware(0): Initialized VMware Xv extension successfully.
    [ 258.508] (==) RandR enabled
    [ 258.514] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 258.514] (EE) AIGLX: reverting to software rendering
    [ 258.541] (II) AIGLX: Loaded and initialized swrast
    [ 258.541] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 258.605] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 258.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 258.605] (II) LoadModule: "evdev"
    [ 258.605] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 258.609] (II) Module evdev: vendor="X.Org Foundation"
    [ 258.609] compiled for 1.17.1, module version = 2.9.2
    [ 258.609] Module class: X.Org XInput Driver
    [ 258.609] ABI class: X.Org XInput driver, version 21.0
    [ 258.609] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 13 paused 1
    [ 258.609] (II) systemd-logind: releasing fd for 13:65
    [ 258.676] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event3)
    [ 258.676] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall"
    [ 258.738] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 13 paused 1
    [ 258.738] (II) systemd-logind: releasing fd for 13:67
    [ 259.128] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse0)
    [ 259.128] (II) No input driver specified, ignoring this device.
    [ 259.128] (II) This device may have been added with another device file.
    [ 259.129] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 259.129] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 259.129] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 13 paused 1
    [ 259.129] (II) systemd-logind: releasing fd for 13:64
    [ 259.224] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
    [ 259.224] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 259.224] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "vmmouse"
    [ 259.224] (II) LoadModule: "vmmouse"
    [ 259.224] (II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so
    [ 259.227] (II) Module vmmouse: vendor="X.Org Foundation"
    [ 259.227] compiled for 1.16.0, module version = 13.0.0
    [ 259.227] Module class: X.Org XInput Driver
    [ 259.227] ABI class: X.Org XInput driver, version 21.0
    [ 259.227] (II) VMWARE(0): VMMOUSE module was loaded
    [ 259.227] (II) Using input driver 'vmmouse' for 'ImPS/2 Generic Wheel Mouse'
    [ 259.227] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 259.228] (II) VMWARE(0): vmmouse is available
    [ 259.228] (**) Option "Device" "/dev/input/event4"
    [ 259.317] (**) ImPS/2 Generic Wheel Mouse: ZAxisMapping: buttons 4 and 5
    [ 259.317] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
    [ 259.317] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 6)
    [ 259.317] (II) VMWARE(0): VMMOUSE DEVICE_INIT
    [ 259.317] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 259.317] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 259.317] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 259.317] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 259.317] (II) VMWARE(0): VMMOUSE DEVICE_ON
    [ 259.317] (II) VMWARE(0): vmmouse enabled
    [ 259.318] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
    [ 259.318] (II) No input driver specified, ignoring this device.
    [ 259.318] (II) This device may have been added with another device file.
    [ 259.318] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 259.318] (II) No input driver specified, ignoring this device.
    [ 259.318] (II) This device may have been added with another device file.
    (II) VMWARE(0): vmmouse enable absolute mode
    [ 259.402] (II) systemd-logind: got pause for 226:0
    [ 265.277] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
    [ 265.338] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
    [ 265.640] (II) VMWARE(0): VMMouseUnInit
    [ 265.645] (II) vmware(0): Terminating Xv video-stream id:0
    [ 265.710] (II) Server terminated successfully (0). Closing log file.
    And here's my xorg conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "se"
    Option "XkbOptions" "lv3:ralt_switch"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
    ### <percent>: "<f>%"
    ### [arg]: arg optional
    #Option "HWcursor" # [<bool>]
    #Option "Xinerama" # [<bool>]
    #Option "StaticXinerama" # <str>
    #Option "GuiLayout" # <str>
    #Option "AddDefaultMode" # [<bool>]
    #Option "RenderAccel" # [<bool>]
    #Option "DRI" # [<bool>]
    #Option "DirectPresents" # [<bool>]
    #Option "HWPresents" # [<bool>]
    #Option "RenderCheck" # [<bool>]
    Identifier "Card0"
    Driver "vmware"
    BusID "PCI:0:15:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Last edited by Torxed (2015-06-04 13:22:57)

    Turning off hotplug works for the keyboard, but that disables the mouse:
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    Anyone got any ideas why evdev/systemd doesn't detect the keyboard at all, forcing me to use a manually created/autocreated xorg conf via `X :0 -configure`?
    Last edited by Torxed (2015-06-08 11:49:09)

  • Issues with using 3 monitors on 2 external gpu

    Hi,
    I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
    1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
    lspci |grep VGA:
    03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
    xrandr:
    Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
    DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
    1920x1080 60.0*+
    1600x900 60.0
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
    Section "ServerLayout"
    Identifier "X.org Configured"
    #Screen 0 "Screen0" 0 0
    #Screen 1 "Screen1" RightOf "Screen0"
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "DELL"
    Option "Monitor-DVI-I-1" "DVI-I-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor1"
    VendorName "DELL"
    Option "Monitor-DP-1" "DP-1"
    EndSection
    Section "Monitor"
    Identifier "Monitor2"
    VendorName "DELL"
    Option "Monitor-DP-1-2" "DP-1-2"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nouveau"
    BusID "PCI:3:0:0"
    Option "Monitor-DVI-I-1"
    Option "Monitor-DP-1"
    EndSection
    Section "Device"
    Identifier "Card1"
    Driver "nouveau"
    BusID "PCI:34:0:0"
    Option "Monitor-DP-1-2"
    EndSection
    Xorg log (I can see that monitor at time 1767.316):
    [ 1766.959]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1766.960] X Protocol Version 11, Revision 0
    [ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
    [ 1766.961] Build Date: 13 December 2013 03:11:42PM
    [ 1766.962]
    [ 1766.962] Current version of pixman: 0.32.4
    [ 1766.963] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
    [ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
    [ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 1766.966] (==) ServerLayout "X.org Configured"
    [ 1766.966] (==) No screen section available. Using defaults.
    [ 1766.966] (**) |-->Screen "Default Screen Section" (0)
    [ 1766.966] (**) | |-->Monitor "<default monitor>"
    [ 1766.966] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1766.966] (**) | |-->Device "Card0"
    [ 1766.966] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1766.966] (**) |-->Input Device "Mouse0"
    [ 1766.966] (**) |-->Input Device "Keyboard0"
    [ 1766.966] (==) Automatically adding devices
    [ 1766.966] (==) Automatically enabling devices
    [ 1766.966] (==) Automatically adding GPU devices
    [ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.966] Entry deleted from font path.
    [ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 1766.967] Entry deleted from font path.
    [ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 1766.967] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 1766.967] (WW) Disabling Mouse0
    [ 1766.967] (WW) Disabling Keyboard0
    [ 1766.967] (II) Loader magic: 0x7fec20
    [ 1766.967] (II) Module ABI versions:
    [ 1766.967] X.Org ANSI C Emulation: 0.4
    [ 1766.967] X.Org Video Driver: 14.1
    [ 1766.967] X.Org XInput driver : 19.1
    [ 1766.967] X.Org Server Extension : 7.0
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
    [ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
    [ 1767.169] Initializing built-in extension Generic Event Extension
    [ 1767.170] Initializing built-in extension SHAPE
    [ 1767.170] Initializing built-in extension MIT-SHM
    [ 1767.170] Initializing built-in extension XInputExtension
    [ 1767.171] Initializing built-in extension XTEST
    [ 1767.171] Initializing built-in extension BIG-REQUESTS
    [ 1767.172] Initializing built-in extension SYNC
    [ 1767.172] Initializing built-in extension XKEYBOARD
    [ 1767.172] Initializing built-in extension XC-MISC
    [ 1767.173] Initializing built-in extension SECURITY
    [ 1767.173] Initializing built-in extension XINERAMA
    [ 1767.174] Initializing built-in extension XFIXES
    [ 1767.174] Initializing built-in extension RENDER
    [ 1767.174] Initializing built-in extension RANDR
    [ 1767.175] Initializing built-in extension COMPOSITE
    [ 1767.175] Initializing built-in extension DAMAGE
    [ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1767.176] Initializing built-in extension DOUBLE-BUFFER
    [ 1767.176] Initializing built-in extension RECORD
    [ 1767.176] Initializing built-in extension DPMS
    [ 1767.177] Initializing built-in extension X-Resource
    [ 1767.177] Initializing built-in extension XVideo
    [ 1767.177] Initializing built-in extension XVideo-MotionCompensation
    [ 1767.178] Initializing built-in extension XFree86-VidModeExtension
    [ 1767.178] Initializing built-in extension XFree86-DGA
    [ 1767.178] Initializing built-in extension XFree86-DRI
    [ 1767.179] Initializing built-in extension DRI2
    [ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 1767.179] (II) LoadModule: "glx"
    [ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1767.179] (II) Module glx: vendor="X.Org Foundation"
    [ 1767.179] compiled for 1.14.5, module version = 1.0.0
    [ 1767.179] ABI class: X.Org Server Extension, version 7.0
    [ 1767.179] (==) AIGLX enabled
    [ 1767.180] Loading extension GLX
    [ 1767.180] (II) LoadModule: "nouveau"
    [ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1767.180] compiled for 1.14.4, module version = 1.0.10
    [ 1767.180] Module class: X.Org Video Driver
    [ 1767.180] ABI class: X.Org Video Driver, version 14.1
    [ 1767.180] (II) NOUVEAU driver
    [ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1767.180] RIVA TNT (NV04)
    [ 1767.180] RIVA TNT2 (NV05)
    [ 1767.180] GeForce 256 (NV10)
    [ 1767.180] GeForce 2 (NV11, NV15)
    [ 1767.180] GeForce 4MX (NV17, NV18)
    [ 1767.180] GeForce 3 (NV20)
    [ 1767.180] GeForce 4Ti (NV25, NV28)
    [ 1767.180] GeForce FX (NV3x)
    [ 1767.180] GeForce 6 (NV4x)
    [ 1767.180] GeForce 7 (G7x)
    [ 1767.180] GeForce 8 (G8x)
    [ 1767.180] GeForce GTX 200 (NVA0)
    [ 1767.180] GeForce GTX 400 (NVC0)
    [ 1767.180] (--) using VT number 3
    [ 1767.182] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) [drm] nouveau interface version: 1.1.1
    [ 1767.183] (II) Loading sub module "dri2"
    [ 1767.183] (II) LoadModule: "dri2"
    [ 1767.183] (II) Module "dri2" already built-in
    [ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
    [ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1767.183] (==) NOUVEAU(0): RGB weight 888
    [ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1767.183] (==) NOUVEAU(0): Using HW cursor
    [ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1767.183] (==) NOUVEAU(0): Page flipping enabled
    [ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
    [ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1767.265] (II) NOUVEAU(0): Digital Display Input
    [ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.265] (II) NOUVEAU(0): Supported established timings:
    [ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.265] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
    [ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.265] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
    [ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
    [ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
    [ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
    [ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
    [ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
    [ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
    [ 1767.273] (II) NOUVEAU(0): Digital Display Input
    [ 1767.273] (II) NOUVEAU(0): 8 bits per channel
    [ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
    [ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
    [ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
    [ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.273] (II) NOUVEAU(0): Supported established timings:
    [ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
    [ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
    [ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
    [ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
    [ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1767.273] (II) NOUVEAU(0): Supported standard timings:
    [ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
    [ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
    [ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
    [ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.273] (II) NOUVEAU(0): EDID (in hex):
    [ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
    [ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
    [ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
    [ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
    [ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
    [ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
    [ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
    [ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
    [ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1767.274] (II) Loading sub module "fb"
    [ 1767.274] (II) LoadModule: "fb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.274] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "exa"
    [ 1767.274] (II) LoadModule: "exa"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.274] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 2.6.0
    [ 1767.274] ABI class: X.Org Video Driver, version 14.1
    [ 1767.274] (II) Loading sub module "shadowfb"
    [ 1767.274] (II) LoadModule: "shadowfb"
    [ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.274] compiled for 1.14.5, module version = 1.0.0
    [ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.274] (II) Loading sub module "dri2"
    [ 1767.274] (II) LoadModule: "dri2"
    [ 1767.274] (II) Module "dri2" already built-in
    [ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
    [ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1767.275] (==) NOUVEAU(G0): RGB weight 888
    [ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1767.275] (==) NOUVEAU(G0): Using HW cursor
    [ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
    [ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
    [ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
    [ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
    [ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
    [ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
    [ 1767.347] (II) NOUVEAU(G0): Digital Display Input
    [ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
    [ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
    [ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
    [ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
    [ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
    [ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
    [ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
    [ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
    [ 1767.347] (II) NOUVEAU(G0): Supported established timings:
    [ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
    [ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
    [ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
    [ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
    [ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
    [ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
    [ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
    [ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
    [ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
    [ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
    [ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
    [ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
    [ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
    [ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
    [ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
    [ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
    [ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
    [ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1767.348] (II) Loading sub module "fb"
    [ 1767.348] (II) LoadModule: "fb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1767.348] (II) Module fb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (II) Loading sub module "exa"
    [ 1767.348] (II) LoadModule: "exa"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1767.348] (II) Module exa: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 2.6.0
    [ 1767.348] ABI class: X.Org Video Driver, version 14.1
    [ 1767.348] (II) Loading sub module "shadowfb"
    [ 1767.348] (II) LoadModule: "shadowfb"
    [ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1767.348] compiled for 1.14.5, module version = 1.0.0
    [ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1767.348] (--) Depth 24 pixmap format is 32 bpp
    [ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1767.360] (II) EXA(256): Driver registered support for the following operations:
    [ 1767.360] (II) Solid
    [ 1767.360] (II) Copy
    [ 1767.360] (II) Composite (RENDER acceleration)
    [ 1767.360] (II) UploadToScreen
    [ 1767.360] (II) DownloadFromScreen
    [ 1767.360] (==) NOUVEAU(G0): Backing store disabled
    [ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1767.360] (==) NOUVEAU(G0): DPMS enabled
    [ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
    [ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
    [ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1767.366] (II) EXA(0): Driver registered support for the following operations:
    [ 1767.366] (II) Solid
    [ 1767.366] (II) Copy
    [ 1767.366] (II) Composite (RENDER acceleration)
    [ 1767.366] (II) UploadToScreen
    [ 1767.366] (II) DownloadFromScreen
    [ 1767.366] (==) NOUVEAU(0): Backing store disabled
    [ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1767.366] (==) NOUVEAU(0): DPMS enabled
    [ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1767.366] (--) RandR disabled
    [ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1767.389] (II) AIGLX: Loaded and initialized nouveau
    [ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1767.444] resize called 1920 1080
    [ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.479] (II) LoadModule: "evdev"
    [ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
    [ 1767.479] compiled for 1.14.3, module version = 2.8.2
    [ 1767.479] Module class: X.Org XInput Driver
    [ 1767.479] ABI class: X.Org XInput driver, version 19.1
    [ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.479] (**) Power Button: always reports core events
    [ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.479] (--) evdev: Power Button: Found keys
    [ 1767.479] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
    [ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 1767.479] (**) Option "xkb_rules" "evdev"
    [ 1767.479] (**) Option "xkb_model" "pc104"
    [ 1767.479] (**) Option "xkb_layout" "us"
    [ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
    [ 1767.500] (**) Power Button: always reports core events
    [ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
    [ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 1767.500] (--) evdev: Power Button: Found keys
    [ 1767.500] (II) evdev: Power Button: Configuring as keyboard
    [ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
    [ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 1767.500] (**) Option "xkb_rules" "evdev"
    [ 1767.500] (**) Option "xkb_model" "pc104"
    [ 1767.500] (**) Option "xkb_layout" "us"
    [ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
    [ 1767.500] (II) No input driver specified, ignoring this device.
    [ 1767.500] (II) This device may have been added with another device file.
    [ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
    [ 1767.501] (II) No input driver specified, ignoring this device.
    [ 1767.501] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
    [ 1767.502] (II) No input driver specified, ignoring this device.
    [ 1767.502] (II) This device may have been added with another device file.
    [ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
    [ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
    [ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
    [ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
    [ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
    [ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
    [ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
    [ 1767.502] (**) Option "xkb_rules" "evdev"
    [ 1767.502] (**) Option "xkb_model" "pc104"
    [ 1767.502] (**) Option "xkb_layout" "us"
    [ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
    [ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
    [ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
    [ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
    [ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
    [ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1767.503] (II) No input driver specified, ignoring this device.
    [ 1767.503] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1767.504] (II) No input driver specified, ignoring this device.
    [ 1767.504] (II) This device may have been added with another device file.
    [ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
    [ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 1767.504] (**) Option "xkb_rules" "evdev"
    [ 1767.504] (**) Option "xkb_model" "pc104"
    [ 1767.504] (**) Option "xkb_layout" "us"
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
    [ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
    [ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
    [ 1767.505] (**) PS/2 Generic Mouse: always reports core events
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
    [ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
    [ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
    [ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
    [ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
    [ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
    [ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 1767.505] (II) No input driver specified, ignoring this device.
    [ 1767.505] (II) This device may have been added with another device file.
    [ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
    [ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) evdev: Power Button: Close
    [ 1779.499] (II) UnloadModule: "evdev"
    [ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
    [ 1780.500] Error dropping master: -22(Invalid argument)
    [ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
    [ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
    [ 1780.503] (EE) Server terminated successfully (0). Closing log file.
    Thanks for any help!

    I have  a similar issue except with two ATI cards and four monitors.
    I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
    I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
    lspci:
    01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
    My xorg.conf:
    Section "Device"
    Identifier "ATI0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-0"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI1"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "ZaphodHeads" "DVI-1"
    Screen 1
    EndSection
    Section "Device"
    Identifier "ATI2"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-2"
    Screen 0
    EndSection
    Section "Device"
    Identifier "ATI3"
    Driver "radeon"
    BusID "PCI:4:0:0"
    Option "ZaphodHeads" "DVI-3"
    Screen 1
    EndSection
    Section "Monitor"
    Identifier "DVI-0"
    Option "Primary" "On"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-1"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-2"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Monitor"
    Identifier "DVI-3"
    Option "DPMS" "true"
    Option "PreferredMode" "1920x1080"
    Option "TargetRefresh" "60"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "ATI0"
    Monitor "DVI-0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen1"
    Device "ATI1"
    Monitor "DVI-1"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen2"
    Device "ATI2"
    Monitor "DVI-2"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "Screen3"
    Device "ATI3"
    Monitor "DVI-3"
    DefaultDepth 24
    Subsection "Display"
    Depth 24
    Modes "1920x1080"
    EndSubSection
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen "Screen0" 0 0
    Screen "Screen1" RightOf "Screen0"
    Screen "Screen2" Above "Screen1"
    Screen "Screen3" Above "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    Option "Xinerama" "1"
    EndSection
    My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
    I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
    xrandr --listproviders show the two cards as well.
    Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
    "xrandr --setprovideroutputsource 0 1" just plain crashes X

Maybe you are looking for

  • Multiple users on Mail

    Hi - this is probably a silly question. My wife and I share our mac. when we set it up we did not set up multiple accounts as was too complicated to share photos in iphoto, addresses etc. would like though to be able to "split" our use of mail. can e

  • ITunes Library and Time Machine over network

    Hello everyone, I've got a 2008 unibody MacBook running Mountain Lion, I've been using Time Machine on a SeaGate external HDD, in addition to storing my iTunes Media on the drive.  This external drive was always plugged into my computer via USB.  Wel

  • Overall relese for PR

    Hi, Following setting has done for the PR release 1.overall relase for doc type 2. Overall relase for Release group And all setting has done in set up procedure and system shows that  no error re requisns. w. overall release but  while creating PR Re

  • Memory leak in ODBC Driver version 8.1.7.8?

    We have a web application connected to an 8.1.7 database on a MS Windows 2000 SP 2 server. We recently upgraded ODBC driver from 8.1.7.7 to 8.1.7.8 and found that we ran out of virtual memory. On further investigations, a simple refresh of our summar

  • Problem with SD card reader

    I have problem with 4-in-1 card reader in my laptop. When I insert 64 MB microSD (with adapter of course) everything is working fine, but 1024 MB microSD isn't working. dmesg shows mmc0: unrecognised SCR structure version 1 mmc0: error 4 whilst initi