DEV- QAS : Obligatory transport target for business system not found

Hi guys!
I have read all the other threads about this subject, but since I still have no success, I´m feeling obligated to ask you for a help (deadline approaching fast!)
I´m trying to transport a Communication Channel, from DEV environment to QAS. I'm having the 'usual' error:
Import failed because of business system transfer of object Communication Channel * | SIGA | SOAP_SYNC_SENDER: Obligatory transport target for business system SIGA not found in System Landscape Directory
Here were my steps:
Keep in mind that in DEV, everything was up and running: Software Component, Product, Technical System and Business System for this name "SIGA".
1 - In DEV, I created a new Technical System, named "SIGA_QAS", pointing to my QAS server. (Keeping in mind I already had a "SIGA" pointing to my DEV server.)
2 - Still in DEV, I did create two groups: GROUP_DEV and GROUP_QAS, one points to INTEGRATION_SERVER_DX1 (DEV) and the other INTEGRATION_SERVER_QX1 (QAS).
3 - Still in DEV, I created the Business System called "SIGA_QAS" also, pointing to my QAS server.
4 - Still in DEV, I went inside both Business Systems and put: "SIGA_QAS" as TARGET BS of "SIGA" (which automatically puts "SIGA" as SOURCE BS of "SIGA_QAS")
If I look at my QAS SLD, I can see all of these objects already there, since my BASIS team did activate the 'sync' between these two environments. So, I dont need to create anything 'new' in my QAS SLD, all the objects are there, same as DEV SLD.
If I try to EXPORT/IMPORT a simple Communication Channel (using file system or even CTS - I tried both) I get the error mentioned above.
But this is 'wierd' for me, since the error says: "business system SIGA not found in System Landscape Directory", but it is there, in both SLDs.
Am I missing something here?
Thanks!
Ricardo Sancio Lóra
Brazil

Hi,
If you not tried this then try it. Delete the Business System SIGA from Integration Directory in your QAS system and then again import the business system from SLD. Acitvate the changes and then import the CC from Dev to QAS.
Regards,
Sarvesh

Similar Messages

  • Transport target for business system not found in System Landscape Director

    Folks,
    We have new installed new PI 7.1 system and importing interfaces from the OLD XI 3.0 system in to new PID 7.1 system.
    We are getting following error when we try to import an interfaces in to new PID system:
    Import failed because of business system transfer object
    Communication component XID_FileSystem: Obligatory
    transport target for business system XID_FileSystem not found in
    System Landscape Directory
    We are yet to install PIQ system.
    All the interfaces in the old XID system have transport target of XIQ system.  I removed the  transport taget for the interface, but transport target is still showing in the Business system under transport target head.
    How can we overcome this issue as we will not have PIQ system atleast for two weeks.
    Thanks in advance,
    Regards
    Chandu

    Hi,
    You need to maintain Transport Groups and target for business systems while SLD transports between your XI system and PI 7.1
    Illustrated with DEv & PRD here.
    Procedure:
    1) Call Integration Builder screen on DEV Server with http://hostname:J2ee Port/rep
    2) Call SLD (System Landscape Directory) Component from the Integration builder
    Save all the Following .zip files on the Local Desktop
    3) Select the Software Component & say Export that you want to Export from DEV
    Server to Production server and which is going to use in the IR of XI
    4) Also Select the Product of the above SWC and say Export
    5) Select the Technical Systems (TS of XI & TS of the SAP R/3) and say Export
    6) Select the Business System(s) & say Export; those are associated with above Exported
    Technical systems.
    In Production Server
    1) Logon to the SLD of the Production Server.
    2) Create a Technical System and Business system which points to the Production SAP R/3
    3) Go to Administration TAB in the main page of SLD
    4) Select the Import option to Import the SWC , PRD, TS,& BS which we Exported Earlier in DEV Server
    5) Click on Browse and select the .zip files that is to Import into Production Server,
    Which were stored on the local desktop at the time of DEV Server Export
    And say Import Selected File Option
    By this we exported and imported the SLD Objects
    Now we have to create transport groups and transport targets in the Production server of SLD
    Creation of Transport Groups
    Edit GroupsGroup1) Select the Business systems 
    2) Click on New Group and give the name of the group as DEV_group & select the
    Corresponding Development serveru2019s integration Server
    3) Similar way create another group for Production serveru2019s business system as
    PRD_group and select the Production serveru2019s integration Server
    Creation of transport targets
    This is to Define which business systems in two different groups correspond to each other
    1) Select each Business system in the SLD and select transport TAB---click on
    Add/Change Target and select its corresponding target business system.
    For Example:
    If you select the business system of Production XI server means
    In the target you have to select group as DEVGROUP and the business system of Development XI server.
    Like this do the same for other business systems also
    Ex:
    BS_PRD_Integration Server----
    BS_DEV_Inetration Server
    How to create Transport Groups & transport Targets
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
    Regards
    Seshagiri

  • Obligatory transport target for business system SAPR3D not found in System

    HI All ,
    We have installed New PI 7.1 system and stared migrating the interfaces from XI 3.0 to PI 7.1 . in Devlopement system .
    IR object have been successfully deployed but while delopying ID objects got the following error . Obligatory transport target for business system SAPR3D not found in System Landscape Directory.
    When I checked with  business system transport target was not defined ., Please suggest how to go ahead further .
    Thanks ,
    Prakash

    Hi Ravi,
    Please go through below disucssion it is on the same line of your question.
    Transport target for business system not found in System Landscape Director

  • Obligatory transport target for business system BS_DEV in SLD

    Hi all,
       We are moving receiver detrmination from QA to PRD, there we are getting one error
    "com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
    >>>rt failed because of business system transfer of object Receiver Determination   BS_DEV  
    >>>   *   *: Obligatory transport target for business system BS_DEV not found in Sys
    >>>tem Landscape Directory caused by: com.sap.aii.ib.core.transport.api.PostprocessingException: Import
    >>>failed because of business system transfer of object Receiver Determination   BS_DEV  
      *: Obligatory transport target for business system BS_DEV not found in Syste
    >>>m Landscape Directory caused by: com.sap.aii.util.hmi.api.HmiMethodFault: caused by: ClientServerEx
    >>>ception exception:Import failed because of business system transfer of object Receiver Determination
    >>>  BS_DEV      *   *:Obligatory transport target for business system WP
    >>>C_Dev not found in System Landscape Directory caused by: com.sap.aii.ib.core.transport.api.Postproce
    >>>ssingException: Import failed because of businesssystem transfer of object Receiver Determination
    >>>  BS_DEV     *   *: Obligatory transport target for business system BS_
    >>>DEV not found in System Landscape Directory"
    I am moving the same object from development to production, i feels ther is some problem in setting transport target.
    BS_DEV target system is BS_QA, in development sld
    BS_QA source system is BS_DEV anf target system Is BS_PRD in Quality sld
    BS_PRD source system is BS_QA, in production.
    The above error occurs when we are moving same object which i moved from development to quality to production.
    whether i need to take obejct from quality and need to move that one to production, or i can use the same development object to production...?
    Regards
    Pradeep P N

    Hi,
    Even I am facing the same problem.
    we have given the Transports Target as mentioned, but still facing the same error:
    Deployment
    Transport request   : DPIK900141
    System              : QPI
    tp path             : tp
    Version and release: 375.30.25 710
    CTS Deploy Service - Version 0.92 06.03.2007
    ========================================================================
    Deploy Web service destination = CTSDEPLOY
    Directory = /usr/sap/trans/data
    SDM Deploy URL =
    SLD Deploy URL =
    XI Deploy URL = http://sqnpi1.sap.sgroupit:51600
    Double-stack system QPI
    Deploy for XID
    Deploy File = 2f8021d0f9ca11dea81e001a64925608
    Start of Web service log
    Deploy Service called with following parameters:
    CommunicationData-Type:1
    CommunicationData-Address:http://sqnpi1.sap.spoolzgroupit:51600/dir
    CommunicationData-Host:sqnpi1.sap.sgroupit
    CommunicationData-Port:51600
    CommunicationData-User:'filled'
    CommunicationData-Password:'filled'
    Deployable(0)
    Deployable-Type:1
    Deployable-Id:/usr/sap/trans/data/DPIK900041/2f8021d0f9ca11dea81e001a64925608
    com.sap.aii.ibtransportclient.XiTransportException: caused by: ClientServerException exception:Impo
    >>>rt failed because of business system transfer of object Receiver Determination   DPI   SI_POS_CH_SN
    Returncode:'8'
    Deployment
    End date and time : 20100105151741
    Ended with return code:  ===> 8 <===
    Can anyone guide to solve it.

  • Obligatorytransport target for business system not found in SLD

    Dears,
    We implemented CTS+ in our PI three system landscape.
    While implementation we configured local SLD and after that for dev and QAs we configured a central SLD.
    And for Production we have seprate SLD.
    In DEV SLD we have three buisness systems:
    File_Dummy   of type DEv
    File_Dummy_Q of type QAS
    File_Dummy_P of type PRD
    Now in transport target group of File_Dummy I put File_Dummy_Q and in File_Dummy_Q I put File_Dummy_P but for BS File_Dummy_P target group is empty.
    Now I put all these BS into a request and import them in QAS then I get error:
    Obligatorytransport target for business system File_Dummy_P not found in System Landscape Directory
    Now I am not getting what to put in transport target of File_Dummy_P as it is of type.
    I tried to put their File_Dummy_P but we can not put PRD type BS there.
    I also tried with dev and qas BS there but still same error.
    Please suggest how to resolve this error.
    Regards,
    Shivam

    Hi,
          did you transported the associated technical systems of your business systems....?
    Also I assume you have assoicated the targets foryour business systems in SDL..
    like for D targets are Q and P
    for Q source is D and Target is P
    for P sources are D and Q... if not assoicate the same...
    and also make sure the three groups are available for three environments...
    HTH
    Rajesh

  • Transport Error while transporting ID TR (Target Business System not found)

    Hi Gurus,
    We are facing a issue with transports while transporting a ID transport to Prod from QA.(We are using CTS+)
    Its our first transport to PROD and we have checked the configuration for BC Application Server in Administration ->Content Maintenance and all looks good .
    Our SLD is looks as below
    We have shared SLD for Dev and QA and it looks as below
    Dev's BS has target business system of QA BS
    And in Prod Sld looks like as below
    QA's BS has target business system of Prod BS
    When we transport from Dev To QA transport works fine but when we transport from QA to Prod its gives below error and in error its points that target for  Dev business system is not found in Target SLD.
    We thought we should try to point Dev BS ====>>Prod BS may be that might work work but its also giving error same error.
    Below mentioned is the Error
    class java.rmi.RemoteException:
    ClientServerException exception:Import failed because of business system transfer of object Service   BS_ACN_MDH_DEV:Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
    com.sap.aii.ib.core.transport.api.TransportCsException: Import failed because of business systemtransfer of object Service   BS_ACN_MDH_DEV: Obligatory transport target for business system BS_ACN_MDH_DEV not found in System Landscape Directory
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:741)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:205)
    #at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:171)
    #at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90)
    #at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107)
    #atcom.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
    #atcom.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:142)
    #at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:721)
    #at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importXiStream(InternalTransportServiceImpl.java:500)
    #at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importXiStream(TransportServiceImpl.java:265)
    #at com.sap.aii.ib.server.transport.impl.hmi.CmsHmiMethods.process(CmsHmiMethods.java:306)
    #at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169)
    #atcom.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178)
    #at com.sap.aii.utilxi.hmis.sbeans.HmisBeanImpl.process(HmisBeanImpl.java:86)
    #at com.sap.aii.utilxi.hmis.sbeans.HmisLocalLocalObjectImpl1_0.process(HmisLocalLocalObjectImpl1_0.java:144)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:290)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211)
    #at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70)
    #at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496)
    Can you guys please help out in resolving this error.
    Thanks in Advance.

    Hi,
    I assume you have two SLDs(SLD1 - for Dev and QA , SLD2 - for Prod) and PI 7.0 or XI 3.0.
    In this case the ideal solution would be to
    1. set up a SLD bridge between your Dev/QA SLD and Prod SLD. The bridge basically forwards all the Technical system SLD info to Prod. SLD.
    2. Import Dev business systems information into Prod.
    3. Then create transport target,
    Make sure that you have created Business Groups for Dev/QA/Prod properly
    Edited by: Nageshwar Reddy on Mar 17, 2009 8:29 AM

  • How & Where to create the Target Groups and Transport Targets for Business

    Hi Experts,
               I am Transporting the scenarios from Development 500 client XI system to Development 500 client PI7.1 system. I have taken the exports of Technical system and Business System from the DEV XI system and correspondingly have imported the same in the PI7.1 system. I can see the all the business system in the Business system SLD of the PI7.1 system. I would like to assign the Business System Groups and Transport Targets for every business system that I want to transport. How can I do that ? Whether this is to be done in DEV XI system or the DEV PI system? Can somebody elaborate the step by step method to create the Groups and Target system for the every Business system so that I can import the object of the Integration Directory sucessfully................................
    Thanks & Regards
    suk4023
    Edited by: sukande on Aug 17, 2010 8:18 AM

    Hi Supriya,
               Thanks for the reply and good illustration............Still going further after defing the destination for transport in the source SLD Business system ( XI dev server) , then we should export it and subsequently import it in the SLD of the PI 7.1 ie the destination server.  Then we should transport the objects of Integration Repository and Integration Directory to the new PI7.1 server. Is this the right way to proceed.?  Hope that this will not give the error while importing the objects in Integration Directory. An typical which comes while importing the objects in the Integration Directory is as follows:-
    *Import failed because of business system transfer of object Communication Component | PCM: Obligatory transport target for business system PCM not found in System Landscape Directory*
    Pls clarify on this ......
    Thanks & Regards
    suk4023

  • Business system not found in CPACache

    Sceinario was working fine before XI system crash. After the system is reestablished the scenario not working. Giving RFC error "Service: SAPESRI not found in CPACache" in R3 system
    CPAcache refreshed for dela  as well as full
    Adapter specific identifiers are fine
    SLD cache cleared in IR ID
    Business System name is found in CPAcache
    error repeated
    Business System deleted from SLD. New business system Created. Entire scenario reconstructed. All the above are also fine.
    Still error is repeating.
    Can anybody give a solution for this problem please?
    Regards,
    Venkat

    Hi Venkat,
    The subject of the problem & the problem explanation is varing i.e *Business system not found in CPACache*
    However, the problem still lieing with SLD. So, test the SLD and activate the scenario. Also without refreshing CPA cache you will have to perform execution.
    Regards
    Pothana

  • SPROXSET ...Unable to rectify Business systems not found issue..

    Hi,
    On doing a test of my proxy I am frustrated with an error " Business system not found". I have maintained SPROXSET values as IFR_aDDRESS = XI.XYZ.COM, IFR_PORT = 51000, IFR_USER = PIAPPLUSER and IFR_PASSWORD = XIPASS.
    I encounter this error whenever I do a test on SPROXY and I can't see the business systems from the SLD. What am I missing here? My sldcheck , sldapicust are all good. The only error in sldcheck is LCR_SAP_BUSINESS_SYSTEMS gives a retuen code fo 4. Please advise on what I am missing here.
    Teresa

    Check RFC destination
    The below links may be useful
    How do you activate ABAP Proxies?
    How do you activate ABAP Proxies? - Activate Proxy
    ABAP Server Proxies - ABAP Server Proxy
    ABAP Proxies in XI(Client Proxy) - ABAP Client Proxy
    BSP a Developer's Journal Part XIV - Consuming WebServices with ABAP
    File to R/3 via ABAP Proxy - ABAP Proxy
    http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

  • Proxy Runtime for Business System not visible in RWB.

    Hi,
    We are running SAP PI 7.10 SP7.
    The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
    There is Business Systems configure for both the Application systems in the SLD from the registration.
    In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
    Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
    Please can you assist in this matter?
    Regards
    Willie Hugo

    Hi,
    The problem is solved with patches to the following JAVA components.
    MESSAGING 7.19
    SAP_XIAF7.17
    SAP_XITOOL7.14
    Regards
    Willie Hugo

  • Interface on Business System not found

    Hi,
    I have the following scenario:
    RFC --> XI --> Webservcie
    I import the RFC interface and use it directly as interface.
    At the development system it work's fine productively it doesn't work.
    Has anybody a hint for me?
    PS: I compared all.
    Regards Johann

    Johann,
    check the Dev Technical System in SLD. See all the Products that are installed in it.
    Then, go for the Dev Business System in that Technical System, and check which SWCV you have for the installed products.
    One of these SWCV is the one that contains the imported RFC that you uses in your integration. You need to add this SWCV to Prod Business System for the interface to be available in Integration Directory. Check what is the Product which contains this SWCV.
    Now, for the Prod Technical System, check if it has the Product which contains the SWCV you need. If not, add the Product to that Technical System. Then, go for the Prod Business System, mark the newly added Product and select the SWCV you need. Make sure to save the modifications.
    That's all. You should be able to see the interface in Integration Directory (if it was properly transported into Integration Repository).
    Regards,
    Henrique.

  • Business system not found

    What actions should you take if your Business System does not show when attempting to "Transfer from the SLD"?

    Hi,
    The Following things u have to check
    1) Check Whether that BS is already is Assigned to Another Scenario
    2) If it is Assigned to another scenario means, goto Objects TAB -
    Expand Service With out Party
    Business sysemRight click---Add to scenario( Select ur scenario)
    Thie will adds the BS to your scenario also
    3) Do SLD Cache through Envoronment----SLD Cache
    The Process to Assign the BS
    1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
    2) Say Continue-Say Continue Select ur BS
    3) Un check the Check Box Bottom of the Window
    REgards
    Seshagiri

  • Java plugin for business objects not found. When trying to modify a business objects query, it says a plugin is required but none are found. What do I need to do?

    I downloaded firefox 4.0 and attempted to use business objects. A screen comes up saying that a plugin is required but when I click on the screen, it say's no plugin is found. I am using the latest version of Java but it seems that the plugin is not there.

    There is workaround.
    Enter “about:config” in the browser’s address bar.
    Search for “html5.parser.enable”.
    Double-click the row to set the value to “false” (row should also go bold to indicate change).
    There is a possibility that it may cause HTML5 compatibility issues down the road but it solved the issue.

  • Does CTS+ work with SLD transport targets for ID transports?

    Hi,
    does CTS+ work with SLD transport targets for ID transports?
    did any of you ever used it ?
    thank you,
    Regards,
    Michal

    Hi Michal
    I would be interested to find out about this..
    Hopefully this new project will use 7.1 and Basis are doing all the SLD and the CTS+ config..
    I have every faith in them!!!!  :-O
    There is a document about transporting repository and directory objects, but every version I have found is corrupt - or I cannot open in Adobe...
    You may have more luck!
    Change and Transport System
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
    "This How-to Guide explains step–by-step how to set up the enhanced Change and Transport System (CTS) for use in conjunction with usage type Process Integration (PI) of SAP NetWeaver (formerly known as SAP NetWeaver Exchange Infrastructure or SAP NetWeaver XI). CTS introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality."
    Maybe in six weeks I can actually answer this for you!  I'm sure you'll have the answer by then!

  • Role for business system defined in SXMS_CONF_ITEMS'

    hi
    in RWB integration engine status is red in detail it is showing.
    'No role for business system defined in SXMS_CONF_ITEMS'.
    how can i fix this.
    regards,
    krushi

    HI
    Runtime Workbench - Integration Engine
    Are the Roles in SXMS_CONF_ITEMS and the SLD Consistent?
    //***The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
    This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
    extract taken from this thread
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
    Message was edited by:
            Anusha  Ramsiva

Maybe you are looking for