Devastatingly embarrassed- How to adjust CPU Ratio in CBII

Guys,
Just purchased my first ClickBios II board (I ALWAYS and ONLY buy MSI products) and Im running into my first unfun experience as a user.
Ive been away from the game for about 2 years working in remote Alaska, however, I consider myself an advanced user so this is hard for me to ask.
HOW the HECK do you adjust CPU ratio in Click Bios II?
MSI z77IA-e53
k2600
7970 ghz edition
Bios is v10.2
Im *GASP* operating off of OC GENIE right now, god someone help me.

Read the Overclocking threads, they show screenshots and are very helpfull.
https://forum-en.msi.com/index.php?board=27.0

Similar Messages

P67A-GD55: "Adjust CPU Ratio" disables "CPU Phase Control"

I'm using P67A-GD55 (BIOS ver.1.7) and i5-2500K.
I changed "Adjust CPU Ratio" and I found "CPU Phase Control" was disabled automatically.
1. Click "Green Power" and set "CPU Phase Control" to "APS Mode".
2. Click "OC" and set "Adjust CPU Ratio" to "33"
(It's a default value, but please click the number "33").
3. Click "Green Power" and check "CPU Phase Control".
It is changed to "Disabled".
Please keep "CPU Phase Control = APS Mode".

> MSI employees rarely come here and post even more rarely.
Thanks for the info.
I had another account and I reported a BIOS bug a few years ago.
MSI fixed it soon.
I remember that, so I bought the MSI mainboard.
I hope this post would help other P67A-GD55 users and the MSI developers.
Note for users:
MSI will upload the latest BIOS to the Taiwanese site first.
Taiwan - BIOS ver1.7
http://tw.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=2226
Europe - BIOS ver1.6
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=2226
US - BIOS ver1.7
http://us.msi.com/mb/html/P67A-GD55_BIOS.html

BIOS showing 2500K Locked & Cant adjust CPU ratio in Windows.. P67A-GD65

Hello all..
I am not having any stability issues at all with my setup.. It is running great and I love the P67A-GD65..
However I am having an issue w/ CPU ratio adjustment..
I am running the 1.6 BIOS release from the 1.4 the board shipped with.. The issues remained on both BIOS versions..
I noticed in the CPU section the BIOS is seeing my 2500K as "LOCKED".. I can however adjust the CPU ratio manually in the OC section of the BIOS to achieve the overclock I want..
I enabled the "adjust cpu ratio from OS" option.. However the Control Center II software will not show me a dropdown to adjust the ratio in Windows 7 Pro 64bit.. So I have to make manual CPU ratio changes in the BIOS for now.. Control Center II does allow all other options to be changed.. Memory settings etc.. I just can't change the CPU ratio..
I've tried uninstalling/reinstalling the Control Center app.. BIOS upgrade.. CMOS clear.. etc.. I suspect this is just a flaky BIOS issue..
Anyone else experiencing this? This is a minor inconvenience.. I can get everything I need out of the board from the BIOS I would just really like to use Control Center II for everything if possible..
Thanks!!

Quote from: zsde on 12-January-11, 14:10:44
The best I can advise is to delete Control Centre from your PC and attempt changes via the BIOS. IF that fails then MSI technical needs to be advised so that they can try and simulate your hardware combo. If it does work via the BIOS, then MSI technical should be advised irrespective about the Control Centre's inability to perform the functions it should.
My own experience with Control Centre software has been anything but satisfactory. The best way is still to tweak via the BIOS.
Just to confirm, you did do a CMOS reset/clear after the BIOS update? Power cord removed..... the normal procedure?
Yeah I've been working in the BIOS.. Bummer the tool lets me change everything but the CPU ratio..
I cleared CMOS w/ the same process you mentioned a few times prior to be sure..
Just after I made the initial post I opened a tech support tkt so we shall see.. I still think it has something to so w/ the BIOS interpreting my CPU as locked but I could be wrong..
Thanks for your assistance.. I appreciate it..

How do you adjust CPU ratio?

System Specs:
Intel Core 2 Q6600 (G0)
MSI X48 Platinum
BIOS: v2.3 (07/07/2008)
How do you adjust the CPU ratio in the Cell Menu? It is not greyed out, but I can't seem to change it to anything. It talks about Speed stepping technology needing to be disabled, but from what I can tell that is under the DOT Control stuff which I have disabled. Any ideas?

Quote from: snits on 07-August-08, 05:48:43
I just read in another thread that you need an extreme chip or an engineering sample to do this. Is this true?
That is only if you want to apply higher MP than default one.
Quote from: snits on 07-August-08, 05:53:23
I will give it a shot again when I get back home. Thanks

Z77A-GD80 Beta bios 1.2B Cant Adjust CPU Ratio I7 3770K

So I finally got my ram issue fixed (was bad module from Gskill). Now the issue that I am having is that I cant adjust the CPU ratio so I can overclock my I7 3770K! It is on auto and it will not let me use the + or - keys or manually input the ratio I want to use. On the drop down menu all I have is auto. Is this a bug with this bios? What am I doing wrong if anything?

Are you trying to change the multiplier from uefi/ bios or click bios II? Have you tried flashing back to 1.1?
>>Use the MSI HQ Forum USB flasher<<
http://us.msi.com/product/mb/Z77A-GD80.html#/?div=BIOS
If the problem goes away, please report this to msi.
>>How to contact MSI.<<

Cannot adjust CPU ratio on z77 GD55

My computer shut down automatically because of Drmos overheating few hours ago.
After that my max CPU ratio can only adjust to 37 and my ram speed can only set at max 1333mhz
Other than that my computer seems absolutely normal.
What is the problem of my compuer, I will never forget to turn on my case fan when playing Skyrim for 10 hours .....:(
HEEEEELP~~~

Quote
What is the problem of my computer, I will never forget to turn on my case fan when playing Skyrim for 10 hours
What exactly is meant by that? The system should always be properly cooled. Recommend to remove the PSU power cord, remove the battery for awhile, clear CMOS and reset and try again. What kind of CPU cooling solution are using? What kind of air flow does the case normally have running? What were the system OC settings when it all went bad?

P67A-G43 Can't Adjust CPU Ratio or DRAM Voltage After BIOS Upgrade to 5.4

After upgrading in preparation for a 3770K, the new BIOS doesn't let me set the CPU Ratio (it reads Auto without [], and is not adjustable). It also does not let me adjust the DRAM voltage (same thing is shown - Auto without []). This is in "normal" mode, but same thing goes for "eco" mode. If I switch to OCG mode, the ratio adjusts, but I do not have manual control. Prior to BIOS it was fine and adjustable. Any suggestions?

I tried OCG mode (which defaults to 4.2). This also did not work. BIOS shows 4.2 in top left and in ratio, but CPU-Z continues to show 3.4.
Switching to OCG and back to normal also failed to POST, but a CMOS clear and battery removal remedied that.
But even after the reset BIOS shows set ratio, while CPU-Z and benchmarks show stock 3.4.
I'll post a separate topic.

Command Center upgrade to 1.0.0.68 does not adjust CPU Ratio

Hello,
I had a previous version of Command Center. I believe it was 1.0.0.48. I was able to use it to adjust the CPU ratio OK.
However, it kept asking that I upgrade to the latest. I finally did this and now the new version (1.0.0.68) will not adjust the CPU Ratio.
I am using the Z87-GD65 Gaming board, with the 1150 socket, operating in Windows 8.1 64 bit.
I have the i5 4670k cpu.
I would like to revert back to the original version, which I believe is Command Center 1.0.0.48, but I cannot find a link to it anywhere.
Can you please provide a link to it?

I mean that when I set the CPU ratio to say 39 and then I click APPLY, the CPU ratio stays at 34.
Command Center will show it's at 39, but Real Temp still shows it at 34.
When using the older version, I set the CPU ratio to 39, then click APPLY, the CPU ratio goes to 39.
Real Temp will show it's at 39.
Version 1.0.0.68 will not adjust the CPU ratio.
Also, I can install Command Center from the DVD that comes with the MSI board. It is even older than 1.0.0.48 (right now, I cannot remember the version, but it is older). I am able to adjust the CPU ratio to 39, then click APPLY and the CPU ratio is now at 39.
Real Temp will show it's at 39.
Not the case with 1.0.0.68.
Anyway, is there anyway I can get version 1.0.0.48?

How Come My Cpu Ratio Is Locked??

hello.. i really want to over clock my cpu but cpu ratio is locked i can only reach 215 fsb then all crashes.. or i'm just doing the wrong thing hehe
i have a
pentium 4 2.6c HT on
2x256 corsair xms C2 SPD enabled
875P neo-fis2r bios 1.7

All intel CPUs are factory locked unless you get an engieneering sample.
http://www.intel.com/support/processors/sb/cs-001527-prd24.htm

MOVED: BIOS showing 2500K Locked & Cant adjust CPU ratio in Windows.. P67A-GD65

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=144672.0

Quote from: zsde on 12-January-11, 14:10:44
The best I can advise is to delete Control Centre from your PC and attempt changes via the BIOS. IF that fails then MSI technical needs to be advised so that they can try and simulate your hardware combo. If it does work via the BIOS, then MSI technical should be advised irrespective about the Control Centre's inability to perform the functions it should.
My own experience with Control Centre software has been anything but satisfactory. The best way is still to tweak via the BIOS.
Just to confirm, you did do a CMOS reset/clear after the BIOS update? Power cord removed..... the normal procedure?
Yeah I've been working in the BIOS.. Bummer the tool lets me change everything but the CPU ratio..
I cleared CMOS w/ the same process you mentioned a few times prior to be sure..
Just after I made the initial post I opened a tech support tkt so we shall see.. I still think it has something to so w/ the BIOS interpreting my CPU as locked but I could be wrong..
Thanks for your assistance.. I appreciate it..

MOVED: How to adjust CPU NB Multi, or HTT Multi in BIOS on K9N2 SLI Platinum?

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=126239.0

Ok so that setting allows me to adjust the HT Link.... though it does this by multiples of 200... starting at 200; going up as high as 3000+
However I discovered that I can only go up to 1800. If I try to set it at 2000, then my system refuses to POST and I have to clear the CMOS and start over.
I also discovered that, changing this setting, does not seem to have any effect on the CPU-NB setting.
What does have an effect on the North Bridge; is changing the CPU FSB Frequency. However, not only does this adjust the North Bridge mhz, it also overclocks both the CPU and the DRAM frequency at the same time; but I can't get the North Bridge any higher then 2370mhz without again, causing the system to refuse to POST and resulting in me having to reset the CMOS and starting over.
The reason I was asking and trying to do this is; I was told by OCZ, if I can adjust my DRAM to around 1000mhz, and the NB to 2400mhz, then my ram, which refuses to run at 1066 without crashing my system; I was told my RAM would be preforming equivolent or better then 1333 ram. But it seems my K9N2 SLI Plat will not achieve that 2400 without becoming unstable.
The highest I can get it is 2370...

SAPScript: how tu adjust heigh and width of standard text (logo)?

Hi!
how to adjust heigh and width of standard text (logo)?
I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
For now stadard text comes over the window. Here is how I use it:
INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
Will reward,
Mindaugas

Hi Mindaugas,
While uploading using RSTXLDMC. You have to maintain your size of the logo.
Go through below mentioned document.
Upload TIFF files to SAPscript texts
Description
The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
The black and white raster images ( BMON) can be printed using the following printer types:
PCL-5 printer
PostScript printer
Kyocera PRESCRIBE printer
Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
The color raster images (BCOL) can be printed using the following printer types:
PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
Restrictions:
In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
Requirement
The file which is to be uploaded can contain the following formats/ commands:
Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
Parameters of RSTXLDMC
File name
Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
Type
Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
Resolution for TIFF raster images
Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
75 dpi
100 dpi
150 dpi
200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
300 dpi
600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
Graphic Resident on Printer
Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
This parameter can only be used with types "BMON" and "BCOL".
Absolute positioning
Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
Absolute X-position
Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
Absolute Y-position
Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
Reserve height automatically
If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
Reserved height
If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
Shift to right
If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
Unit of measurement for positioning
The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Text title
Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
Line width
Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
Text name
Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
Note: The name of a standard text can be up to 32 characters long !
Text ID
ID of the standard text to be generated. The default value is ST (general standard texts)
Text language
Language key of the standard text to be generated. The default value is the logon language
PostScript scaling
Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
%%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
The flag must be set to 'X' for the import of TIFF files for type POST.
Width according to PS scaling
Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
Height according to PS scaling
Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
Unit of measurement for PS scaling
Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Number of TIFF gray levels
Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
Output
Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
Regards,
Ameer Baba.

How to adjust external monitor brightness / contrast

I just recently bought a MacBook Pro, and I am trying to calibrate my Lacie photon20vision (not mark II) but cannot figure out how to adjust the brightness and contrast. The problem lies in that when using the DVI input on the monitor the on screen adjustments are not available. You are required to use software to adjust the levels when using the DVI on this monitor. In Windows I would just go into the driver properties and adjust and all was fine. On my mac I can choose resolution and err, that's it.

Hi
I am not too sure if I get to the Windows because screen is damaget so much you cannot see anything, but bo matter what I do external monitor is in power safe mode. And I know for sure the monitor is good - tried on different system and it works.
The whole idea is I do not need to use this laptop as portable device, I was planning to connect external monitor, keyboard and mouse and use it as office CPU.

How to increase cpu voltage on A75A-G35?

Please tell me how to increase cpu voltage on A75A-G35(I changed pstates in BIOS but voltage not changed!)? and then tell me range of voltage in 1-7 Pstates?
Thanks.

Quote from: MSI service FAQ
Q: I cannot adjust the CPU Voltage on my A55/A75 motherboard?
A: Due to a hardware limitation on this platform, you cannot adjust the CPU voltage. However, you can adjust the NB voltage which is the same on this platform.
(http://service.msicomputer.com/html/popup/techsup/formviewer.asp?esoformid=2987)
The NB voltage setting is below the "Advanced DRAM Configuration" and the only way to increase a cpu relating voltage on that board.

How to enable cpu fan control and monitor

Just had this new budget PC build:
MSI FM2-A55M-E33 Bundkort micro-ATX Socket FM FM2-A55M-E33
AMD A serie A4-5300 3.4 GHz 2 cores 2 tråde 1 AD5300OKHJBOX
G.Skill ARES Hukommelse 8 GB : 2 x 4 GB DIMM F3-1600C9D-8GAO
Linkworld Mini LC727-10 Black Piano 550W 727-10-C2128 It
Windows 8 Licens og medie 1 PC OEM DVD 64-bit WN7-00401
ZALMAN CNPS 5X Performa Processor-køler CNPS5X PERFORMA
Samsung 840 Series MZ-7TD120 Solid state driv MZ-7TD120BW
Samsung SH-224BB Disk drev DVD±RW (±R DL) / D SH-224BB/BEBE
OS: win 8,64bit
Thing is i dont know how to enable CPU fan control/regulation ifd possible. Doesn't realy see anything anything in the mobo manual except mentioning AMD Cool’n’Quiet.
This fan i have installed is running fine but i thk it runs full speed all the time and that makes a lot of noise - not needed.
Thx for any advice/tip/hint

40 °C is fine. The minimum fan speed can be set is a % of the full capacity.
Start with 12.5% and if the fan needs to adjusts it's fan speed too often and it get's annoying you can raise it to 25% or more.

Devastatingly embarrassed- How to adjust CPU Ratio in CBII

Similar Messages

Maybe you are looking for