Develop Adapter Module locally and deploy it later on the server

Dear friends,
Is it possible to develop Adapter Module for PI 7.11 locally using SAP NWDS on your local PC and when you are finished deploy the EAR files on the server using JSPM?
Thank you and kind regards,
Kamran

There are two ways in which u can deploy EAR files on PI server..
1) Deploy EAR file directly on PI server using NWDS.
or
2) Convert EAR into SDA file and then using JSPM deploy it on PI server..
Re: Creating SDA file using NWCE tool

Similar Messages

Jar files required to develop adapter module in 7.1

Hi,
can any one tell me whether below jar files are enough to develop the adapter modules in 7.1,
u2022 aii_af_cci.jar
u2022 aii_af_mp.jar
u2022 aii_af_ms_api.jar
u2022 aii_af_ms_spi.jar
u2022 aii_af_trace.jar
u2022 aii_af_svc.jar
u2022 aii_af_cpa.jar
if not please let me know set of jar files need to develop adapter module in 7.1.
Thank You,
Madhav

Hi ,
Below Jar files Required to develop Adapter Module in PI7.1
com.sap.aii.af.cpa.svc.api
com.sap.aii.af.lib.mod
com.sap.aii.af.ms.ifc_api
com.sap.aii.af.svc_api
sap.comtcloggingjavaimpl
Regards,
Raj

Developing adapter modules for PI 7.0 using NWDS 7.3

Hello all,
Did someone have already developed adapter modules for PI 7.0 using NWDS 7.3? I can´t find the EJB libraries for Java 1.4.
I'm able to develop mapping programs, but I'm not sure if it is possible to create EJB projects.
Thanks,
Marcos

Hi Marcos,
I haven't tried developing adapter modules in NWDS 7.3 for PI 7.0 myself, but according to the documentation from SAP it is possible to develop J2EE 1.4 compliant applications i.e. EJB 2.1 components, which is used by SAP PI 7.0.
[http://help.sap.com/saphelp_nw73/helpdata/en/48/fc1e73a0ad2637e10000000a42189d/frameset.htm]
Because of this backwards-compatibility I would expect that the EJB libraries for J2EE 1.4 should be available directly in NWDS 7.3 somewhere.
Best regards,
Jacob

SRP521W - Local and Remote Traffic Cannot be the Same Subnet Address

I support an existing VPN infrastructure with PIX, Juniper NS5GT, and Netopia devices used as VPN endpoints. In all cases, I can create a VPN where the location's internal subnet, 10.x.y.0/24 sends traffic to 10.0.0.0/8 out the VPN tunnel. In the case of this 521W that we are evaluating, it appears that I cannot do this. Insteadm when creating the IPSEC policy I get this error "Local and Remote Traffic Cannot be the Same Subnet Address." Which, while strictly true, has never been an issue with all the above devices. Is there a workaround or other methodology to support this?
Thanks.

We have extactly the same problem with the SRP527W. Other Cisco small business products work like.
Cisco RV 120W
http://www.cisco.com/en/US/products/ps10852/index.html
Cisco WRV210
http://www.cisco.com/en/US/products/ps9929/index.html
We need a device with that supports one IPSec VPN and one ADSL interface and is easy to use like these devices.

HT201304 ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you

Hello
ello my little brother has developed lock my iPhone and I could not see the unlocking code Please help and thank you
edited by host

Hi Omar_a983,
If you are having an issue with the passcode on your iPhone, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

Deploying selected projects to the server for testing?

I have an application that is comprised of several self-contained projects. Is there a way to deploy two of the projects within the application without deploying the rest of them?
For example, one of the projects is a stub while the other is the real code. I would like to deploy just the project with the "real" code and not have the stub project be deployed at all. But, I am finding that the jar files from both projects are always deployed to the server. I'd like to be able to turn on/off deployment of individual projects to server for testing. Anyone know how to do this?
Thanks!

Hi,
Can you provide additional information on which version of Workshop you are using. With workshop studio, if you need multiple projects to be deployed simultaneously, you can choose the manual deployment option available in the server configuration process.
Unfortunately in WLW 8.1 this cannot be done. You will need to remove the project from the application to have it undeployed from the server
cheers
Raj

Error trying to validate app using Xcode: "An SSL error has occured and a secure connection to the server cannot be made."

After I have done a last Apple Updated on my computer, can't anymore validate or submit apps usign Xcode, everytime I received this message: "An SSL error has occured and a secure connection to the server cannot be made"
Any ideas?

I had this happen a while ago too when I switched development machines, but I was able to submit it from a friend's house, so I'm pretty sure it is my ISP but this should not be a problem. I am trying to push out another update and I'm having the same problem again. I would be very happy if there was a permanent solution to this problem.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work. Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behavior?

Hi
"Changed group membership in WGM 10.6.3 from the 10.6 server. The change takes overnight to work"
If I've understood you correctly I've never known this or anything else to take that long? What were you trying to do exactly?
"Formerly ran WGM from my 10.6.8 mac (worked perfectly) but now I am at 10.7.5 and must use WGM on the server. Has anyone else seen this behaviour?"
http://support.apple.com/kb/HT1822
HTH?
Tony

Ical "authentication failed. your username and password were rejected by the server"

i've a pretty busy server, fully configured with correct DNS.
running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
then added the iCal service back, and set the data store to this new folder.
authentication is set to digest (to reduce potential kerberos errors), with SSL on.
i then started the service
an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
SO. WHAT IS GOING ON?
this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
help. please. and no comments about DNS. the fact i can get a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
Dare I ask... How many users would you have to remake?
150 users would probably take 2 hours to recreate?
...Have you spent 2 hours on this problem yet? How about 4 or 6?
Perhaps you could have typed up 450 remade users so far!
I have a great idea as to how to change ownership of home folders to users after they're created.
Thoughts on the problem... (but don't spend too much time on it!)
What about crypt vs open directory password?
In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords?
...sometimes that pull-down menu displays OD, but it's not really. Try selecting OD, retype the password there, and save.
See if it works.
What about in server admin.... Select the server in question, click the access button at the top.
Ensure that your services are allowed for all users to use the iCal service.
In the iCal service in Server Admin...
Host name setting? It's a stretch as new users seem to work. Ensure it's correct?
For the sake of argument... Change authentication type to Any Method... If you're running OD on the server, Kerberos is running. I know that certain services require it even though you have the option. Perhaps iCal is being finiky without it?
I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics. It's honestly the best place to start. Seeing as we don't know what you've done, it's the best advice you'll get.
HTH
-Graham

After updating my iPhone 4s to iOS 6.1, Verification Failed: An SSL error has occurred and a secure connection to the server cannot be made. My wifi connection works; the icon is present at the top left. But Internet won't connect, be it Safari, App Store

After updating my iPhone 4s to iOS 6.1, Verification Failed: "An SSL error has occurred and a secure connection to the server cannot be made." My wifi connection works; the icon is present at the top left. But Internet apps won't connect, be it Safari, App Store or Facebook & instagram. Push notifications also work so posts from Facebook and Instagram still pop-up. Does any one have any ideas? Thanks.

I have the same problem. Worked fine on Friday. My VPN or any ssl site do not work on my iPhone 5. Both work perfect on iPhone 4 and 4s

HT4993 How to fix this error an ssl error has occurred and a secure connection to the server cannot be made

an ssl error has occurred and a secure connection to the server cannot be made cant backup to icloud

Hi trenthoskins,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are having issues backing up your iPhone to iCloud, you may find the following article helpful:
iCloud: Troubleshooting creating an iCloud backup
http://support.apple.com/kb/ts3992
Regards,
- Brenden

HT201401 an ssl error has occurred and a secure connection to the server cannot be made

getting this error message "an ssl error has occurred and a secure connection to the server cannot be made" how to fix?

Deleting the servermgrd certificate in Keychain Access > System > Certificates worked for me as well.
It was the only one I had to delete.

What do I do with this Twitter sign in error on my Macbook Air. An SSL error has occurred and a secure connection to the server cannot be made.

When I try to login in to my Twitter, it gives me this error: An SSL error has occurred and a secure connection to the server cannot be made.
What's the solution? Thanks!

Go into your browser preferences and make sure the boxes for ' Use SSL 3.0' and 'Use TLS 1.0' are checked. The settings will be in preferences > advanced > encryption.
You could also try using another browser.

Ios6 update complete but "an SSL error has occurred and a secure connection to the server cannot be made" shows up so I

I updated ios6 this morning nad when it prompts me to put in my apple user id and password, I get this message...
"an SSL error has occurred and a secure connection to the server cannot be made". I'm in a hotel so is there a problem with the server connection? My laptop is working but I went throught the secure hotel internet. My phone was working fine in the room before the update. HELP! I'm far from home and need my phone.
Thanks,
Tammy

Deleting the servermgrd certificate in Keychain Access > System > Certificates worked for me as well.
It was the only one I had to delete.

Develop Adapter Module locally and deploy it later on the server

Similar Messages

Maybe you are looking for