Develop/Library Display Differences

Hi All
First post ever so forgive me if this is an obvious one...I'm using Lightroom 2.1 on windows and find that sometimes when having used the Sharpening & Masking tools that the changes are not reflected in the Develop Module but are when I swap over to the Library module...
Any ideas anyone?
Many thanks!!

Develop only shows sharpening and noise reduction when you are zoomed in at 1:1. The reason for this is that you should only use those tools to sharpen at 1:1 as the sharpening in Develop is a capture sharpening and is ONLY meant to compensate for loss of sharpness because of the demosaic and some lens blur. For output sharpening you should use the sharpening tools in export, Print, and Web.

Similar Messages

  • Creating a Folder Within Form or Document Library & Display the name not in the name column.

    I have created a form library that will used to create folders within that. The folder creation is done using an InfoPath Form that has been uploaded to the Form Library. When the new folder was created the name will be displayed at the Name column within
    the Form Library. I want to change that to another column like documents or suchlike.
    Can it be done using InfoPath 2010 VSTA C# or not? If their are other options available please could you try to inform me!
    Thank You,
    Chiranthaka

    Hi,     
    If you want to show the name of folder in another column, a workaround is that you can create an extra column, then create a SharePoint Designer workflow to set the value of
    this column with the name of folder.
    Here is a link about Create Workflow using SharePoint Designer and set field value for your reference:
    http://www.codeproject.com/Tips/419037/Create-Workflow-using-SharePoint-Designer
    I have seen a similar post from you in the link below:
    http://social.technet.microsoft.com/Forums/en-US/c3ff3f17-dbe2-40f9-86c5-ff7d4b663f09/creating-a-folder-within-form-or-document-library-display-the-name-not-in-the-name-column?forum=sharepointcustomizationprevious
    It's recommended that you post a single question in a single thread which will make it easier to be discussed by others.
    Best regards
    Patrick Liang
    TechNet Community Support

  • Want to display difference between two datetimes

    I want to display difference between time in the below format
    for example for below two dates
    select to_date('02-feb-2011 23:55:55','dd-mon-yyyy hh24:mi:ss') date1 , to_date('03-feb-2011 00:35:00','dd-mon-yyyy hh24:mi:ss') date2 from dual;
    00:45:05
    Edited by: Sun Vth Oracle on Feb 9, 2011 2:09 AM

    00:45:05Really?
    I get:
    SQL> with t as (
      2  select to_date('02-feb-2011 23:55:55','dd-mon-yyyy hh24:mi:ss') date1
      3  ,      to_date('03-feb-2011 00:35:00','dd-mon-yyyy hh24:mi:ss') date2
      4  from   dual
      5  )
      6  --
      7  --
      8  --
      9  select numtodsinterval(date2 - date1, 'day')
    10  ,      substr(numtodsinterval(date2 - date1, 'day'), 12, 8 )
    11  from   t;
    NUMTODSINTERVAL(DATE2-DATE1,'DAY')                                          SUBSTR(N
    +000000000 00:39:04.999999999                                               00:39:04

  • How to return serch results in document library displayed on a webpart on sharepoint 2010

    Hi all, 
    I want to do an search request on a document library displayed in a web part, but i want to return the results on the page where the document library is displayed  not in the original location of the document library 
    Thanks in Advance 

    Hi,
    Yes you can do this by adding search box and search result webpart on Document library Allitems.aspx.You can set scope of search result as document library only.
    Hope this helps you.
    Regards
    Soni K

  • Apple iOS Developer Library for beginner?

    Is Apple iOS Developer Library has the best resources for beginner with no programming knowledge to start with?

    See these...
    iOS Human Interface Guidelines
    iOS Starting Point
    App Development Overview
    ...also...
    Stanford CS193P iOS 5: iTunes U  |  Assignments 
    Stanford CS193P iOS 4: iTunes U  |  Assignments
    ...and...
    iPhone Developer Beginner Resource Guide

  • My itunes music library displays ping

    why does my itunes music library display ping dialog instead of content

    I see, I was not quite clear:
    When I wrote:
    Then select your songs, that are currently in a different folder, ctrl-click the selection, and from the contextual menu select "Consolidate Files":
    I was refererring to selecting the songs in iTunes, not in the Finder: Go to the "Songs" view in iTunes and select the songs you want consolidated, or a playlist containg all albums. It does not matter, if it contains also songs, that do not need consolidating. iTunes will simply skip these songs, if they are already in the correct location.
    If you have many files to consolidate, it might be quicker to use the command "File > Library > Consolidate ..." from iTunes main menu bar instead:

  • IBooks display differences between iOS7 and iOS8

    I work for a music publisher where we build reflowable ePubs that mostly contain music and embedded audio/video files. It is critical that we deliver an eBook that keeps a/v controllers with the title, credits, music etc. and maintains proper spacing throughout. It's critical not only for the overall look but for the readability and usability of the musician. Clearly a user can increase the font size and destroy any well designed layout for ePub, but if the ePub is designed properly, targeting median font settings, our layouts are consistent from tablet to tablet.
    The recent release of iOS 8 has brought changes to iBooks once again and how it displays content. I've noticed differences with A/V controllers displaying more margin, troubles controlling the alignment and overall width of player. I've also noticed additional margin at the top of each "page" in iBooks which wasn't there in iOS 7.
    These changes may seem minor but they completely break our layouts. I have been trying to correct these issues using CSS, but haven't had any luck. What's even more frustrating is that iBooks for Mac on Mavericks doesn't have these issues. In fact, the audio controller has a completely different look and responds to CSS as it should. These small issues are causing major problems for us because we have thousands of ePubs with audio at Apple.
    We've seen changes in the past with our ePubs when iOS 6 went to 7, so we were expecting things like this to happen. But because our CSS modifications don't seem to work on the iOS side, I'm beginning to think that this is a bug or that there are new issues to contend with when developing ePubs for iBooks. If there have been changes, it would be great to have specs from Apple that would help identify what is happening within iBooks. It would also be great to have development tools for iBooks like there are for all modern browsers today.
    If anyone knows anything about these issues or has information as to where I can find the answers, I would be most grateful.

    This has been my headache since day one and a complete swing and a miss by Apple.  I haven't been able to get ANYTHING I have not explicitely purchased from iTunes to sync in iBooks across device.
    For example:  If I load an ePub or PDF into iTunes and "manually" add to a device, this works just fine.
    However, if I open a PDF file on my iPhone into iBooks, it doesn't show up in any of my other devices, including the new iBooks on my iMac with Maverick.  it doesn't matter which device it's added, nothing syncs if it's not purchased from iTunes.
    Please, someone make me a liar and tell me I've completely missed something.
    Apple:  Why or why can't I add PDF files to iBooks on my iMac and have them automagically show up in the collection I created on all my devices?  Because I didn't purchase them from you, you say?  Stupid, stupid, stupid.
    Then don't let me add it in the first place and stop advertising "my content anywhere on any device" because this has been broken from day one.

  • RGraph (html 5 library) displayed fine in 16.0.2, but doesn't display colors or lines in 17.0

    This is a page that we write from a php library (not that it should make any difference). Here is screen of the 16.0.2 version:
    https://dl.dropbox.com/u/56739431/ReportExampleFF16_02.pdf
    and here is a screen shot of the 17.0:
    https://dl.dropbox.com/u/56739431/ReportExampleFF17.pdf
    Any help would be greatly appreciated.

    A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the MozillaZine forum site in order to post at that forum.

  • Develop & library module discrepancy (Lr 4.1)

    I have read about similar issues floating about with previous versions of Lr, and I have now experienced it in 4.1. When moving between the develop and library modules of images with settings applied (noise reduction, lens correction profiles, etc.), the images change in color, noise reduction, highlights, contrast, etc. This occurs at both the "fit" and "fill" views and at all preview quality settings. At 1:1, the images are identical. However – and this is the bit that is most worrying – the .jpg export retains the settings, or lack thereof, in the library module. I have uninstalled Lr (using AppZapper) and reinstalled it, created a new catalog and re-edited the photos from RAW – all to no avail.
    Here are some screen captures:
    Develop module:
    Library module:
    Note specifically the stars – Ursa Major to the upper left of the fence post. The final export retains the characteristics of the library module, which annoys me, greatly. Any help?

    First of all - for judging sharpness you need to look at 1:1, not screen size.
    In Develop you're looking at the file itself (so that will always be the most accurate), while in Library you're looking at rendered jpeg previews. You probably already know this. But you could try to delete the Previews folder - the one that sits next to the .lrcat - and let Lightroom rebuild them.
    What are your Catalog settings for Previews?
    You should set a pixel size that is equal or bigger than the display. Here it's set for 2048 because the monitor is 1920 x 1200. This affects screen size previews - 1:1 previews will be generated in any case.

  • Lightroom 2015 cc Develop module Display issue

    I have just upgraded to Lightroom 2015 cc.
    When I go into the develop module, it will not display the image, I just get a solid blue image.
    I can see the image in the navigator panel and if I go full screen, plus you can see it in the library module.
    I have tried creating a new catalog, but the same thing happens again

    <moved from Creative Cloud Download & Install to Photoshop Lightroom>

  • I have written employee data code in C#..which has add,delete n display employee data...i have written for add...could u pls help me out to develope delete,display code

    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace Employee_data
        class Employee
            public string ename { set; get; }
            public string edpt { set; get; }
            public int eno { set; get; }
        class Program
            int index = 0, menu;
            Employee[] emps = new Employee[100];
            public Program()
                while (true)
                    Console.WriteLine("1.Add Employee");
                    Console.WriteLine("2.Delete Employee");
                    Console.WriteLine("3.Dispaly Employee");
                    Console.WriteLine("Enter your option:");
                    menu = Convert.ToInt32(Console.ReadLine());
                    switch (menu)
                        case 1:
                            Console.WriteLine("Add Employee");
                            Console.WriteLine("Enter Employee name:");
                            string ename = Console.ReadLine();
                            Console.WriteLine("Enter department name:");
                            string edpt = Console.ReadLine();
                            Console.WriteLine("Enter employee id:");
                            int eno = Convert.ToInt32(Console.ReadLine());
                            Employee e = new Employee();
                            e.ename = ename; e.edpt = edpt; e.eno = eno;
                            emps[index] = e;
                            int i = 1;
                            foreach (Employee e1 in emps)
                                if (e1 != null)
                                    Console.WriteLine("----------------------------------");
                                    Console.WriteLine("Sno: {0}", i); i++;
                                    Console.WriteLine("Employee Name: {0}", e1.ename);
                                    Console.WriteLine("Employee Department: {0}", e1.edpt);
                                    Console.WriteLine("Employee Number: {0}", e1.eno);
                                    Console.WriteLine("----------------------------------");
                            index++;
                            break;
                        case 2:
                            Console.WriteLine("Delete Employee");
                            break;
                        case 3:
                            Console.WriteLine("Display Employee");
                            foreach (Employee e1 in emps)
                                if (e1 != null)
                                    Console.WriteLine("----------------------------------");
                                    Console.WriteLine("Sno: {0}", i); i++;
                                    Console.WriteLine("Employee Name: {0}", e1.ename);
                                    Console.WriteLine("Employee Department: {0}", e1.edpt);
                                    Console.WriteLine("Employee Number: {0}", e1.eno);
                                    Console.WriteLine("----------------------------------");
                            index++;
                            break;
                        //default:
                        //    Console.WriteLine("Exit");
                        //    break;
            public void addemply(string name, string dpt, int num)
                //emps[0] = "kotesh";
                //emps[1] = "IT";
                //emps[2] = "31";
            public void delemply(string name, string dpt, int num)
            public void display()
            static void Main(string[] args)
                new Program();
                Console.ReadLine();

    Hello,
    Please do not post requirement as helping develop a function or an application, this forum is used to discuss and ask questions about the C# programming language, IDE, libraries, samples, and tools. You can attempt to do it yourself and if you meet some
    question, you can post it to here.
    For the requirement, it is beyond the scope of our support.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • User Library displays question mark for icon.

    I've added a folder,called My_Library, which contains a labview llb file consisting of contains controls and VIs to the user.lib\_express folder. When want to select a control from the llb file and access it via the ", some of the control icons contain a large question mark as opposed to the controls icon. Why? Also the control is not selectable, yet if you display the controls name, it is displayed.
    The same applies if I'm in the wiring diagram and I select a VI though the same mechanism.
    Yet if I access the control or VI from the the control or VI is selectable and everything is normal.
    Any help would be appreciated.
    Robert

    This usually happens when you moved file or when the files have been moved for you. Or when a folder name was chanded
    If for exemple you first open a VI from a temporary location, then open you library, the path may be internally changed.
    One fast way to rconnect them is to first open the VIs from the good location, then open the VIs that are calling the first ones, then save the modified VIs
    It would be nice if you take the time to rate this answer
    http://www.machinevision.ch

  • Display difference current week to prior week

    Hi everyone,
    I have following question. I need to display in a Report the difference from the current week to the prior week. I need something like this:
    weeks       |      quantity      |    difference to prior week
    30          |     1000           |
    31          |      500           |     -500
    32          |      800           |      300
    33          |     1200           |      400
    34          |     1000           |     -200
    By starting the report the user enters the "start_date" and "end_date".
    For this example the user enters from "19.07.2009" to "22.08.2009"
    Do you have any ideas how to solve this?
    Many thanks in advance
    Mario

    Hi Salah,
    many thanks for your answer but this doesn't work on my side because each week is a summary of many different records from the database. If I work with "previous" it only subtracts the last quantity from the weeks summary, not the last weeks summary from this weeks summary.
    Is it possible to change the formula to something like this:
    sum ({quantity}, {@calendarweek} ) - previous (sum ({quantity}, {@calendarweek} )
    something like this whould help me I think but I receive an error from the "previous" too much parameters
    Now I tried to create a new formula like this:
    @quantity_calenderweek
    = sum ({quantity}, {@calendarweek} )
    and used it with my previous formula:
    {@quantity_calenderweek} - previous ({@quantity_calenderweek})
    but now crystal sais that this field hast no prior or following value...

  • Is it possible to use "c/c++" developed library in java?

    hello all
    i have a convertor. which convert wav to mp3 and it is developed using "c". now i want to use that in java. is it possible? if possible then how?
    i am working in a project where the project (convertor) will be in server and client will access that from the client pc within a network. now i want to use that convertor which is developed using "c".
    anyone can tell me how can i do that??
    thanks
    bashar

    The previous answers are correct - you can do what you need by using JNI.
    However, there are serveral products, so-called "JNI wrappers" that allow you to call any C function from Java without learning JNI.
    Here is link to one of such products, and you can find others in google as well.
    http://www.excelsior-usa.com/xfunction.html
    Library for painless JNI programming

  • Displaying differences between topic versions 

    I need to be able to show what was changed in a Topic and the
    previous version for an audit. Currently Version Control will show
    each version using the Truecode. I will be showing the difference
    to non technical people so I would like to show each version of the
    Topic in an HTML format. Is this possible or do you have any
    alternatives?

    Using RoboSource Control Explorer, you can perform a 'Get'
    for any version of a topic from its History. This gives you a local
    copy of this version, which can be displayed in a browser.
    Two things to keep in mind:
    - Make sure that you don't overwrite the topic in your local
    project folder.
    - Make sure to copy other needed files (style sheets,
    javascripts, etc.) as well.
    Greetings
    ----Dirk Bock

Maybe you are looking for