Develop MDM solution as an vendor

I would like to develop my own MDM solution such a way Airwatch and Mobiliron vendor provides in the market. Could anyone suggest me how to follow the approach or process ?
I have purchased the Server app and able to manage the devices remotely, but I want to provide the MDM solution as a vendor, I need a help from you guys, please help me..

Finally got the solution for creating own MDM server, after alot of dig.

Similar Messages

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010?

Can we develop a solution in Visual Studio 2012 and still deploy it on BizTalk 2010? or Is it that solutions developed in VS 2012 have to be deployed only to BizTalk 2013?
Thanks

BizTalk 2010 projects are not compatible with Visual Studio 2012. To use Visual Studio 2012 with BizTalk 2010 projects, you must install
BizTalk 2013 on the computer that has Visual Studio 2012. The first time you open a BizTalk 2010 project, it is automatically upgraded to the BizTalk 2013/Visual Studio 2012 project system
Refer
this.
Please mark it as Answer if this answers your question
Thanks.
Mo
The contents I write here is my personal views, not the view of my employer and anyone else.

MDM Solution needed for Toshiba Excite Pure 10.1 Tablet

Hello,
One of my clients, a Charter school, recently received 200 Toshiba Excite Pure 10.1 Tablets. Needless to say I need a MDM solution like yesterday for them.
Requirements being:
1) Basic MDM functionally
2) Ability to download software from a single browser to the tablets
3) Ability to sync with existing smart boards
4) Available education software that could be used with the Toshiba Excite Pure 10.1 Tablets.
Any thoughts?

As you already said above, the repair costs would be higher as purchasing a new device.
I think it would be possible to replace the screen but the question is: do you want to spend a high amount of money to fix it?
If I were you, I would not try to fix it. I would try to sell the device on ebay or similar platforms and would try to get good working 2nd device.

MDM Solution Advice

I'm not sure if this is the best category to write this post in, but I didn't see anything better. Long story short I'm looking for an MDM solution. Currently I'm looking at AirWatch and Casper and would like to hear from other IT admins what they're experiences have been with each.
If you're following me so far, you'll probably want some environmental information. Here's the scenario, I work for a hospital that not only deals with technology inside the hospital, but also works in conjunction with 15 remote clinics. Normally that wouldn't be so bad, expect to reach any of these clinics you have to fly by plane. We have to minimize bandwidth usage as much as possible, internet speed is slow, and connections can be intermittent at times. Luckily each clinic is on a central network that's accessible from the main hospital, and allows us to remote into the computers currently installed at those locations.
Not exactly you're typical MDM scenario at a university or school. I need some advice and real world feed back from anyone who's used either AirWatch or Casper. Personally I'm leaning towards Casper, but my boss whats the multiplatform capabilities of AirWatch in case we begin to deploy non Apple mobile devices.
Thanks,
~Joe

Hi Vadim,
Please refer link below to see interaction of MDM With XI and R/3.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2264. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Also In SAP Netweaver Stack SAP MDM fits at Information Integration level.
Thanks and regards,
Sagar Sonje.
Mark Helpful Answers

Export Master Data Model from MDM solution.

Hello,
I have been assigned the requirement to integrate our product with your “Master Data Management” solution. To be more specific, I need to import the Mater Data structure (model), from your companies MDM solution, into our product to build its table/column structure. What I am looking for is technical documentation that will help me make this possible.
Here is a list of some questions I have that technical documentation could address:
•     Does your MDM solution have the capability to export the underlying Master Data structure (model)?
•     What form is the data structure exported (db schema, data dictionary, etc)?
•     What format would the exported information be in (XML, delimited text file, SQL DDL)?
•     If the format is XML, is there an XML Schema that defines what it will look like?
•     Do you have any sample export files that I can work with?
•     Is there technical documentation that would help me make this possible?

If you want to integrate with DRM I would suggest using the API (check out the SDK). This is the preferred and supported way to inject or extract from DRM from an integration standpoint. You can also do imports/exports, for example exporting a hierarchy in XML, to a table, etc.
Directly modifying the tables is not supported or encouraged; the DRM engine enforces many rules like validations, keeps multiple versions, tracks changes in transaction logs, etc, besides the fact that the database structure can change during upgrades. Additionally, due to the dynamic configuration capabilities some things like property values are stored in a one-to-many table that may be pivoted from what you expect.

MDM Solution components

Hi, all!
Considering MDM Solution as a set of software components interacting with each other, can you suggest the most general model of SAP MDM Solution components and their interrelation? I don't mean components of SAP MDM e.g. Import Manager, Syndicator and oth.
That would be nice to see a graphical model of interaction where following components would be represented: SAP MDM, SAP XI, SAP EP, probably CAF, Enrichment Services and other technologies and components used together to provide a complete master data solution.
This would be twice valuable if it would be considered from any integration concept point of view. (<a href="/people/r.eijpe/blog/2006/01/09/road-to-esa-150-the-epi-model-part-1">EPI</a> for example)
Can anyone point me to such scheme?
Thanks,
Vadim

Hi Vadim,
Please refer link below to see interaction of MDM With XI and R/3.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2264. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Also In SAP Netweaver Stack SAP MDM fits at Information Integration level.
Thanks and regards,
Sagar Sonje.
Mark Helpful Answers

Sharepoint 2013 on-premise integration with MDM solution on Mobile

Hi,
Can sharepoint integrate with a MDM solution on the mobile based on device certificates?
Thanks
Naresh

Hi Naresh,
i would like to suggest you to open a thread also at MDM forum, perhaps there is a clue regarding the device certificate: http://social.technet.microsoft.com/Forums/en-US/home?forum=winphonemgmt&announcementId=048fe18a-0606-4079-a1ec-0fc5bd9a1f1d
for more info regarding the certificates you may check at this article:
http://technet.microsoft.com/en-us/library/bb633120.aspx
please correct me if i am wrong, as i know sharepoint may not have the integration to MDM using OOB feature.
if should the certificate able to set at mobile and system center perhaps sharepoint also able to accept it since it may also use SSL.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

MDM 5.5 Material, Vendor, Employee & Customer Repositories

Hi,
MDM 5.5 comes with object repositories for Material, Vendor, Employee & Customer. Can anyone help me in finding a way to synchronize these with R/3 ?
I am able to see Corresponding IDoc names as data sources in Import Manager for these repositories. But, my question is, what are the steps required for synchronizing with R/3 so that I can import/export these data from/to R/3.
Thanks in Advance,
Rajani Kumar K

look at this doc:
MDME 5.5 - ConfigGuide - MD Consolidation & MD Harmonization
at Quick Link:/nw04installation
Kevin

J2EE Development Component - How to change vendor name

Hi,
While creating a new J2EE Development Component, I didn't change vendor name and have created complete application,
Now I want to update vendor name, can you please help me out how vendor name can be changed in existing application.
Thanks

I have not tried it myself, however:
Try updating the references in your application-j2ee-engine.xml.
You may need to rename your project as well.
Good luck, Roelof

Managing the development within solution manager landscape

Hi
We have a development system (SMD) and a production system (SMP). SMP is the domain controller and manages the change requests of R/3 DEV, QAS and PRD. Now we want to start deploying enhancements to the functionality in the solution manager itself. I created a maintenance project in SMP and activated the change request management. The maintenance cycle is generated showing SMD as the Development track and SMP as the production track. The status is changed to development with release along with the normal activating and unlocking of the tracks. A change request is created in SMP with the component as SMP system. When I try to create a transport request or try log onto the system, the system is raising different types of error messages. Ideally, it should have created transport requests in SMD and should have navigated there for us to perform the required configuration/development. The error messages are System SMD, client 110 not found when trying to log onto the system and when trying to create a new transport request, it raises the exception with below detailed description.
"A technical problem occurred when RFC function module /TMWFLOW/TASK_START was accessed
Message no. SOCM_ACTION_LOG 025
Diagnosis
An exception was triggered when an RFC module was called.
The module is /TMWFLOW/TASK_START
System Response
The system terminated processing. The transaction contains errors.
Procedure
Check RFC connection NONE to the Solution Manager.
Procedure for System Administration
To analyze the termination, you can activate the assertions in the socm_rfc checkpoint group.
Additional Information:
Exception CX_SOCM_RFC_SYSTEM_FAILURE occurred (program:
CL_CHM1_INSTANCE==============CP, include:
CL_CHM1_INSTANCE==============CM00C, line: 140).
There is no RFC destination in the specified target"
Our basis person is also unable to troubleshoot this. Any help will be appreciated. Thanks

Hi Srinivas,
1.Check on the RFCs in SMSY for the SMD and SMP.
2.In the SMSY logical component when you click on the transport route is it showing the proper Transport route as you intented?
3.In the transport route is it client specific?
Please checkon the above and revert back for any clarification.
Thanks and Regards,
Avinash.

Looking for work that is commutable from Chelmsford, I am CLAD qualified and have several years experience developing test solutions

Hi
I wondered if anyone new of any job openings that are commutable from Chelmsford Essex on the perm side of things or any contract
roles available?

Hello,
I saw your message & I was wondering if you were still looking at new opportunities.
I have a client on the North Shore who is looking to hire a Certified Labview Developer. The candidate will use Labview to develop test stands and production equipment as well as develop production releases and special purpose test software. I have included a job description below for your convenience.
Essential Responsibilities:
·         Develop or maintain LabVIEW applications to operate the development systems and skids for several product platforms.
·         Employ hardware platforms of National Instruments hardware, off-the-shelf equipment, plus custom hardware. Experience desirable in SCXI, CompaqDAQ, and USB hardware. Write software to control equipment and record data.
·         Perform advanced LabVIEW programming techniques and interaction of the software with the hardware. TCP/IP and CAN interfaces; LabVIEW Real-Time module and LabVIEW FPGA modules.
·         Support, improve and modify existing LabVIEW applications as necessary to support company-wide product development efforts.
·         Interpret and understand wiring schematics and simple control signal test bench wiring.
·         Troubleshoot software, electrical control, and mechanical interface issues and suggest or implement creative solutions.
·         Document all existing and new LabVIEW applications as needed.
Qualifications: (required unless otherwise noted)
Education
Bachelor’s degree in Software, Electrical Engineering or Computer Science. Master’s degree a plus.
Must be a Certified LabVIEW Developer.
Previous Work Experience
2 to 3 years LabVIEW application programming experience. Process control systems experience is a plus.
5-7 years previous experience with software development understanding hardware/software interfaces and the willingness to work in the hardware and process areas.
Special Skills and Abilities
·         Demonstrated excellence with LabVIEW a must.
This is a full-time, permanent position with a growing company. They are offering a competitive salary, bonus potential & full benefits.
If you know anyone who would be interested in this position, please have them send a current, Word-formatted resume to [email protected] and follow up with a phone call (231-518-4066) so we can discuss the details. Thank you in advance for your assistance.
Thank you,
Brad Fields
Permanent Placement Division Manager
Aries Group, Inc.
Direct: 231-518-4066
Toll Free: 877-806-7977, Ext. 272
[email protected]
www.ariesgroupinc.com
www.linkedin.com/pub/brad-fields/4/828/875

Custom development in Solution manager(SolMan)

Hi All.
I need information on possibility of developing custom code in Solution manager(SolMan) environment. Any information on how we can the extract data from different systems and integrate it in Solution manager for reporting using custom code will be helpful.
thanks in advance.

hi,
you can also have a look at my article:
http://www.solutionmanagerexpert.com/article.cfm?session=&id=3513
this may give you some more ideas how solman can be used with XI
Regards,
Michal Krawczyk

Developed a report to generate vendor performance analysis

please give me the details of the related tables and source code

Ravi,
EINE and EINA will give you the purchase info record data, you might want to check out the schedule lines of the PO as well, table EKET
Other PO tables....
EKKO
EKPO
EKKN
EKBE
EKES
u can also use following tables for the same -
ELBK Vendor Evaluation Header Data
ELBM Vendor Evaluation Material Related Item
ELBP Main Criteria for Vendor Evaluation
~~Guduri

Developing a solution for a client with SAP

Hi there,
We're looking to work with a client who is running an SAP based system, and in advance of our next meeting in a month we have pledged to research the SAP platforms and how to interact with them.
The client will be upgrading to SAP 6 in a couple of months so, due to both this and the fact that we have not been selected yet as the final candidate, interacting with their system is not an option.
I have browsed SDN to see if there was a Developer Edition of the platform that we could use to test with, but couldn't find anything. Could anybody point me in the right direction for either a 'trial version' (though I know this is unlikely!) or even an open test system that we could connect to via VPN to test against... or any other ideas!
Thanks in advance,
Tom Groves
[email protected]

Thank you and whoever you copied this from so so much. Having already sent back one new iPod shuffle because after randomly autofilling from my entire music collection depsite following all the troubleshooting tips it just wouldn't let me do anything else, so I conclude it was broken! I then went out and got another new one from a different source only to find I had exactly the same problem. Ok that's too spooky for it to be a hardware problem, but having wasted two evenings of my life trying to sort it out I thankfully came across this post which works!:-) You are my saviour! Come on Apple put a fix out there for this or at least acknowledge there is a problem - otherwise I'm sure you'll end up loosing sales!

Develop MDM Heirarchy table using Webdynpro Tree

Hi
Can anyone let me know how i can build a MDM Heirarchy table using webdynpro tree.
Thanks

Can you be more specific? Is your problem with MDM or Web Dynpro? And what do you mean by "build an MDM Hierarchy Table"?
Walter

Develop MDM solution as an vendor

Similar Messages

Maybe you are looking for