Develop Module and Preset Application

I would love a way to apply my general adjustments to a copy of a photo and reset all adjustment sliders so I can then consistantly apply a Develop Preset.  I have a large number of develop presets that provide me with particular "looks" I use a lot, but these are not "relative" to the global adjustments made correcting the original photo, i.e. exposure, brightness, contrast, etc.  If my photo has these global adjustments made to it and then I apply a preset, it never looks the same as the previous photo I used that preset with.  Even if I make a virtual copy the original slider adjustments are maintained rather than reseting them to a neutral starting point.  Right now, I export my photo as a PSD file to PS and immediately close it and then apply my develop preset to the PSD file to get consistant results.  This is the same reason why people have to develop RAW and JPG presets, which is double the work.

Not sure if you found a solution or an efficient way to "export" your photo to psd (seems like you "edit in photoshop" and just save) but you could build an Export preset with these options
     same folder as original
     check "add to this catalog"
     existing file = choose a new name for the exported file
     filename = custom text + filename (to end up with something like COPY_originalname.psd)
     file settings / format = PSD or TIFF
     rest leave empty (or as per your preference)
If you have a large number of files to export, you can go for a coffee (or a full lunch) while it exports. Then you can apply your develop presets to the new image.
Additionnally you can create a smart collection with filter = filename starts with your custom text (i.e. "COPY_" in the example) to access your copies quickly
Hope this helps

Similar Messages

  • Relative Adjustments in Develop Module and Presets...

    Hi there,
    the new Lightroom 4 beta is great and has some really good improvements inside (e.g. the "new" shadows/highlight or the new possibilities in the adjustment brush).
    But what I really miss is the possibility to make relative adjustments in the Develop Module. Primary this is useful in presets to make steps of correction. I can do very limited relative adjustments for single parameters partially in the Library Module, but it goes not far enough and I can not save any preset from that or even combinations of adjustments.
    An Example:
    I have an image which is nearly perfect. All adjustments are almost done. Now, I want to give the image a +10 in Clarity or -3 in Brightness relative to all current adjustments. Those relative adjustments are perfectly to increase or decrease simple adjustments stepwise, but also really helpful for stepwise bringing in or out more complex adjustments.
    Another Example:
    I have an image with no corrections. No I can push Clarity, Shadows/Highlights, Saturation etc. from a preset which brings in more and more of a complex set of adjustments, which are just right for this type of image.
    I think, a small checkbox behind a slider would be perfect to set relative or absolute adjustments. This settings should be saved within a preset to make some/all adjustments relative to the exisiting ones, or - if deactivated - absolute adjustment, like in the current version of Lightroom.
    What do you think about that? It would be great to see that in future betas or the final Lightroom 4 product.

    If they've been discussed at length, I'm surprised not to see them. Much has been provided that I would have guessed has received less requests.
    And while I understand that Adobe might simply want feedback on what they have provided, what would be the best forum for letting them know what we feel has not yet been provided.

  • I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even

    I have lost my "Basic" panel in the Develop module and can't figure out how to get it back. My right panel goes from the Histogram straight to the Tone Curve panel.  My Basic panel should be below the Histogram.  Any ideas how to get it back.  I have even uninstalled my lightroom and reinstalled it with same issue.  Help!!!

    Right click on or near one of the other headers and a pop-up will appear and you will be able to select the Basic Panel for viewing.

  • Difference between oracle Developer suit and Oracle Application Server???

    Dear all,,
    If any one please tell me the main difference between Developer Suit and Oracle Application Server.
    I will be very thank ful.
    Thank you
    Hina.

    Hi Hina
    can i deploy my application build on oracle 10g using developer suite with db10g and I don't use application server?For individual use and development yes u can using oracle Developer suit after starting OC4J
    but for client use for more than x user to be able to run reports using parameter forms and other forms application u must use Oracle Application Server
    An application server is
    a server program in a computer in a distributed network that provides the business logic for an application program.
    The application server is frequently viewed as part of a three-tier application, consisting of a graphical user interface (GUI) server, an application (business logic) server, and a database and transaction server.
    More descriptively, it can be viewed as dividing an application into:
    --- A first-tier, front-end, Web browser-based---
    1.graphical user interface, usually at a personal computer or workstation
    2.A middle-tier business logic application or set of applications, possibly on a local area network or intranet server
    3.A third-tier, back-end, database and transaction server, sometimes on a mainframe or large server
    Hope this helps,
    Regards,
    Amatu Allah

  • Configure clients to develop essbase and planning applications

    Hi Gurus
    I have installed hyperion on one of the windows server. Now I want to configure the client components on local machine to develop essbase and planning applications. How to do that? My goal is to have multiple clients configured so that multiple developers can work simultaneously.
    Thank you.

    If you have essbase/planning running on a server then you don't really need to install many client components.
    Planning is mainly accessible through the web, you could install smartview or the excel addin for use in excel, there are standalone installers available for this.
    EAS console can be accessed over the web which will save it having to be installed on client machines, it can be accessed by http://<easmachine>:10080/easconsole/console.html
    If you are looking at using financial reporting then you would have to install financial reporting studio, as you only said planning/essbase then you may not be interested.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Lightroom 5.4 64-bit crashes when switching to develop module (and during random other functions)

    This seems to be a new issue that has developed over the past few days. I have been using Lightroom for multiple years without too many issues. Within the last 90 days I have upgraded to Lightroom 5. Today, upon loading up Lightroom (either 3.6 or 5.2) they both crash upon switching over to the develop module. I have upgraded 5.2 to 5.4, uninstalled 3.6, restarted my computer; still crashes with error message: "Adobe Photoshop Lightroom 64-bit has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Which upon clicking "Close Program" it simply closes the program. Any ideas as to why this is happening and a possible fix? This is greatly impacting workflow. Following is a copy of my System info from Lightroom.
    Lightroom version: 5.4 [955652]
    Operating system: Windows 8.1 Home Premium Edition
    Version: 6.3 [9600]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 2.3 GHz
    Built-in memory: 7944.2 MB
    Real memory available to Lightroom: 7944.2 MB
    Real memory used by Lightroom: 298.6 MB (3.7%)
    Virtual memory used by Lightroom: 268.0 MB
    Memory cache size: 103.5 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1920x1080
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.4
    Library Path: C:\Users\Joshuah\Pictures\Lightroom\Lightroom 5 Catalog.lrcat
    Settings Folder: C:\Users\Joshuah\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Behance
    2) Canon Tether Plugin
    3) Facebook
    4) Flickr
    5) Leica Tether Plugin
    6) Nikon Tether Plugin
    Config.lua flags: None
    Adapter #1: Vendor : 8086
        Device : 416
        Subsystem : fa721179
        Revision : 6
        Video Memory : 0
    Adapter #2: Vendor : 1414
        Device : 8c
        Subsystem : 0
        Revision : 0
        Video Memory : 0
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers (Conexant SmartAudio HD)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    CardID: 1046
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: Intel(R) HD Graphics 4600
    ShaderModel: 11.1
    Vendor: Intel
    VendorID: 32902
    Version: 8086:0416:fa721179:0006

    I have had this same issue now. I have been away from my pc for a week or so and now i cannot use the Develop button
    Lightroom version: 5.4 [955652]
    Operating system: Windows 7 Business Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.5 GHz
    Built-in memory: 32651.3 MB
    Real memory available to Lightroom: 32651.3 MB
    Real memory used by Lightroom: 366.3 MB (1.1%)
    Virtual memory used by Lightroom: 328.1 MB
    Memory cache size: 205.9 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: Yes
    Displays: 1) 1920x1080, 2) 1920x1080, 3) 1920x1080
    Seeming this seems to have stopped around the 21st of May and its now the 9th of June, does this mean we just do nothing about it and hope and pray that one day Adobe, who are very quick to take our money every month, can resolve this ? Has there been a fix noted for this yet ?

  • Color shift between Develop Module and other modules in Lr 5.7.1

    Hello,
    I'm getting a color shift between the devolop module and any other module in Lr.
    It's a recent problem that I've been experiencing since the last update.
    I'm using Lr as part of the Adobe Photographers Bundle in a Windows 8.1 pro.
    Below I have an example for the kind of color shift i'm seeing. The image on the left is from the Devolop Mobule and the one on the right is form the Library Module.
    Is this happening to any one else? Does any one know why?
    I would appreciate any help.

    Gautam is correct in that the preview mechanism isn't the same in Develop and the other modules and, you must view the color in Develop at 1:1 to see an accurate preview. The color space is different that's probably why you see this difference in reds (especially if you use a wide gamut display).
    IF you build your own ICC profiles for your display, be sure the software is not building a V4 (version 4) profile, stick with V2.
    As for exporting and comparing, be sure the secondary application is color managed! Otherwise it's expected that there is a visual disconnect between LR and that app.

  • LR2.1, Develop Module, and WB

    Something I noticed last night:
    NEF files from my D90 with WB set for 'flash' on camera, and 'as shot' in
    the 'Develop Module' results in color temperature of 6000 and tint -9.
    I must use the Develop Module's 'Flash' setting to get the correct temperature of 5500. Is this normal? I've made over 15K D70 NEF images
    and I don't recall the Develop Module's WB reacting like this when 'as shot' was selected. I do have 'Camera Matching Profiles' (beta-2) installed. Any ideas?

    There are many threads on this subject on the forum over the past year. Have a read of this one.
    http://www.adobeforums.com/webx/.59b6becb/10

  • What's the difference between the Application Developer Tools and Server Applications CD

    I have 2 questions about Sql Server 2005.
    1.  I have 2 sets of CDs, one is called Sql Server 2005 Developer Edition, Applications Developer Tools, and another one called Sql Server 2005 Developer Edition Servers Server Applications.
    I installed the Applications Developer Tools on my development pc, and I was able to use create and populate a database, and use Sql Server Management Studio fine. I wonders what 's the Servers Server Applications set of cds for.
    2.  I just like to install Sql Server 2005 on a test pc also.  Can I use my Developer Edition Applications Developer Tools to install it ?
    Thanks.

    Bathoi,
    Is this still an issue?
    Thank you!
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Very different color noise between develop module and library

    There is a marked difference in the appearance of an image when viewed in the library versus the develop module. The color noise in the library module is very bad, while in the develop module, the noise reduction is doing a pretty good job. This is strictly a view problem, because if I export from the library, the proper color noise reduction is applied and it appears as it does in the develop module. This is not the first time that I have found this problem between the two modules. Any idea why this is happening? And, is there a fix in the works? It makes it hard to view images in the library.
    If I boost the color noise reduction up to 100, the library image starts to look ok, but that doesn't account for the huge difference at lower settings.
    There is also a dramatic slow down in the develop module when trying to make any of these changes in noise reduction and more, and also in side-by-side when trying to scroll around in the image to compare areas. Things really crawl. There is a definite two or three second delay before things respond. I have 8gigs in this mac pro, which worked beautifully with LR 3.6

    And, is there a fix in the works?
    Try rendering 1:1 previews for noisy images.

  • Can I use MBA to develope IOS and Safari Application?

    Hi,
    I am planning to buy myself the very first mac.
    Planning to develope the apps on iOS Device.
    Can MBA 11 inch or 13 inch do the job ?
    Thank.
    If not I will wait for the new Macbook Pro which Don't know went will be updated.

    Yes it definitely can. Once you register as a developer you can download Xcode and the iOS SDK from the developer site. A MBP will compile code faster but the MBA can do it easily. The 13" would be a better choice since it's faster and has a larger screen.

  • I own LR and Develop module has been disabled---asking for me to renew membership??

    I purchased Lightroom in 2013 (not Creative Cloud subscription). I recently purchased a new computer and downloaded LR to that one. I have LR registered under my Adobe ID and its listed under "products" that I own, I'm signed into LR with my Adobe ID on my desktop. When I downloaded the program, I used my key I received when I purchased the program to get it up and running. Today I tried going into the Develop module and it says that it has been disabled and to renew my membership to get access to the Develop module again. I do not have the CC subscription...I own it. SOOO, I've been searching and trying to follow Adobe troubleshooting for a few hours and now I've decided to see if I can just get the answer here. Where can I input my key in the program on the desktop or get it to see that I OWN the program and do not need to purchase the membership? On my desktop CC icon, it says that my "trial version" has expired.
    Thanks in advance!

    LR Develop module shows "Disabled.Please renew your membership".You can reinstall the creative cloud application from the below link and then sign in with your Adobe ID(email address registered with Adobe)
    https://creative.adobe.com/products/creative-cloud

  • Preset panel in develop module is missing

    I have lightroom 2.2. Somehow, I accidently removed the preset panel from the develop module and I can't figure out how to restore it. Any help would be greatly appreciated.

    Right-click or Ctrl-click on the Snapshots or History panel and another box will open. Presets (in your case) should be unchecked. Click on Presets and the section will reappear.
    Dave Huss
    Adobe Photoshop Lightroom 2: A Digital Photographer's Guide

  • Photos in Library module and after export look different than in Development module

    Hello,
    I experience a problem.
    After I update photos in the Development module, the updates seem not to be shown in the Library module. And when I subsequently export to Flickr, Flickr is also showing the original photo, not the adapted one.
    I noticed this the first time after making Blacks a bit deeper, causing a sunflower to become a deeper yellow. I thought that my adaptations were not applied in the Library module. After I checked with cranking down the Saturation all the way back (to almost black-and-white), that adaptation WAS applied in the Library view. So it had to be something else, causing the same color difference between the Library and Development modules.
    When I switch from the Library module to the Development module, I see a slight delay in applying my changes, but they are applied. Before they are applied, I can see that the original photo is shown and that looks the same as in the Library module and on Flickr.
    The photostrip on the bottom of the Lightroom screen also shows the original photos only, unless I go to the development module and select a photo (adaptations are applied in the photostrip after I select the photo, not before).
    After I played a bit more in the Development module, I found something strange in the Camera Calibration menu of the Development module. The Adobe Profile (my default) caused an obvious color difference between the Library (less saturated) and the Development (more saturated) modules. The Camera Standard profile also showed a (very) slight difference, but I was unable to notice the differences using the other profiles.
    So I was thinking (but it's only a guess), that the profiles are not applied in the Library view and on export, but they are in the Development module?
    I use Lightroom 5.6, Camera RAW 8.6.
    Please help me, as this is very annoying. I currently cannot export my photos to Flickr or anywhere else, unless I overcompensate before exporting. And I really don't want to do that. My Lightroom photo is my perfect photo, and I want to keep it that way...
    Many thanks in advance for any help,
    Peter

    Hi ssprengel,
    Thanks for your reply. Let me react to each possibility you mention and provide some extra information.
    - "Check your Export / File Settings / Image Format and make sure they are set to JPG not Original". Done that, it's not on Original, but on jpg. This would not explain why I see the difference in the Library and Development modules, by the way. But better to know for sure.
    - "...the most likely thing that is wrong is your color-management on your computer is not working properly". It is a PC with Windows 7. I have been using Lightroom for maybe 6 years and I never had this problem before. The last time I changed my setup is more than a year ago and this problem only started to happen a short while ago (after the update to Lightroom 5.6? I'm not sure, but that's the only thing that has changed lately). I use a Spider to create a custom profile that is correct for my setup and do a regular update on the profile.
    - "what brand and model of monitor do you have?" I have an EIZO FlexScan S2411W and use that for a long time as well. I chose this brand of monitors for its good color reproduction and I have been happy with it for years now.
    What I am not getting is why would all this show a difference between the Library and Development module? The only difference is the Lightroom software that is switching from one module to another, and that should deliver the same photo. I'm also stating in my first post that the differences are very noticeable using the Adobe Standard Camera Profile in the Development module. I have a feeling that the profile is part of the problem.

  • Is vision development module in labview 8.6. sufficient for real-time image acquisition and analysis using a webcam

    Hi, 
    I'm new to labview and trying to develop an eye-tracker using labview 8.6. It has the vision development module and i was wondering if this was sufficient for real-time image acquisition and processing or would i be needing any other software tools.
    Solved!
    Go to Solution.

    Hello, certainly it is possible and sufficient for real-time tracking!
    About eye tracking - if you need an example, you can find the code here:
    https://decibel.ni.com/content/blogs/kl3m3n/2013/10/08/real-time-face-and-eye-detection-in-labview-u...
    The code uses OpenCV functionalities along with the LabView UI (and some other functions like overlay).
    Hope this helps a bit.
    Best regards,
    K
    https://decibel.ni.com/content/blogs/kl3m3n
    "Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

Maybe you are looking for