Develop Preset display in Quick Develop is NOT Hierarchical

It's nice that lists of presets in quick develop now show in flyout folders, but that only works for 1 level of folders. The UI still does not respect the hierarchy of nested subfolders and therefore all subfolders appear in the list on the same level as the top-level parent folder. So you can still very quickly end up with pages worth of scrolling to get to the bottom of the list if there are lots of folders and/or lots of presets in a given folder. And there is still no slider on that flyout menu so the scrolling itself is painfully slow instead of quickly zipping down with a scrollbar.
So yes, this is better than it was before with one long flat list. But it is not hierarchical and it's still painfull slow for large lists.

Similar Messages

Develop does not display

Just finished working on a job, removed it from the library like normal.
Imported the next job, now Develop does not display the photos that are imported, it's just gray.
Lightroom 2.2 523352
XP Pro
4GB RAM
I have uninstalled and reinstalled, still the same, nothing is displayed in the Develop module.
Suggestions please.
Cheers :)

More information. If I click on the arrow in the right of the screen to hide the Develop settings Quick Develop information bar (it's not displayed, just gray), then the picture displays.
In the Library for whatever reason the Quick Develop information bar is in fact displaying, when it never used to.
Cheers :)

Develop settings not showing up in library module view of image

Hi there
A quick question about an issue I have not seen before. Imported a raw image .cr2 file from a Canon S95. Opened develop module and applied clarity, vibrance and sauration adjustements. Clicked back to Library module and the adjustments have not been made. Clicked back to Develop and they are there. Have tried closing LR5 and reopening - the image adjustments are still visibile in Develop, but not in Library. Any thoughts? Is this a software issue or a hardware issue (have just upgraded from LR4). Thanks in advance.

Hi Lee - I'll keep LR running for a while to see what happens. I did notice that when I did the import of the image, the thumbnails of the images from the SD card were not immediately rendered. it was possible to see the images by clicking on each one. When I had previewed each image individually, the thumbnails were visible. I suppose its possible that my hardware is running very slowly as welll.
Thanks
Chris

My SQL Developer is not working correctly! help

hello!!
My problem here is not like I can't live or work but it is REALLY annoying, see my SQL Developer is not taking any key different from letters and the space bar, I mean, if I use the enter key, doesn't change the line, if i use the backspace key doesn't erase if I use F5/F9 doesn't execute the query(s)!!!! and so the arrow keys don't work!!!
any ideas why is that happening? and if so howcan i fix it?

There is a well known but still unresolved bug causing this kind of behavior, if you are on SQL Developer 1.5.X you can work around the problem by loading default accelerators from:
Tools -> Accelerators -> Load Preset -> Default
If you are on 2.1.X the preset can be loaded from
Tools -> Preferences -> Accelerators -> Other Actions -> Load Keyboard
In 2.1 this problem has not been reported so far, so if you are in 1.5.X you may consider upgrading.

Error Determining Smartform - Smartform working in Development but not in Q

Hello all,
I'm currenlty working on a smartform in a development box and it is working as expected after doing the testing in that box but after transporting the change to Q, the new changes are not displayed in the smartform. I already revised the changes and both smartforms are the same in both boxes, it was activated and the code is the same but for some reason the smartform is not displaying the new and modified changes. Does anyone have received a similar error before? Can anyone help me in this issue?
Thanks

There can be only 2 possibilities.
1. Check you Form interface/Tables...whether all the tables, structures are there as in development, if not transport the missing structures and tables.
2. There might be a issue with function module "DO NOT HARD CODE THE SMARTFORM GENERATED FUNCTION MODULE"
Declare as follows:
data : formname type rs38l_fnam.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname           = 'ZFIM_CASHPMTVOUCHER' -
>Please mention your form name here.
   variant            = ' '
   direct_call        = ' '
importing
    fm_name            = formname----
>this will store the generated function module
exceptions
    no_form            = 1
    no_function_module = 2
    others             = 3.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
call function formname        -
>Then call the generated function module here.
exporting
archive_index              =
archive_index_tab          =
archive_parameters         =
control_parameters         =
mail_appl_obj              =
mail_recipient             =
mail_sender                =
output_options             =
user_settings              = 'x'
importing
document_output_info       =
job_output_info            =
job_output_options         =
tables
    it_output                   = it_output                       -
>Check whether all the tables that you pass to your smartform
interface is aval..are aval...and if any structure..then see it at
    it_bkpf                     = it_bkpf                                           data dictionary level...whether its available or not.
    it_ltext                    = it_ltext
   t_position                =
exceptions
   formatting_error           = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled              = 4
   others                     = 5
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
This should certainly solve your problem.

Develop module not working since upgrade to 4.2

I've installed the 4.2 upgrade and now the develop module doesn't work anymore. It was working fine on 4.1, 64bit version.
I'm on Windows 7 Pro, with second generation i7 CPU, 16 gig Ram
Please have look at this thread at Photoshop.com were I reported this problem with a lot of details already. So far no help provided.....and that's 4 days ago.
I really need help with this as I cannot work my Photos until this is fixed...or at least a solution to remove system files that are not removed when un-installing, as they bring the problem to a previous version that was working just fine before upgrade to 4.2 ( un-installed 4.2 then re-install 4.1, then 4.1 now has the same problem I have with 4.2) What a mess.......

Thank you both, as this was the lead I needed to follow.....
The profile is the problem...yes,.... and no....
I use X-rite Color Munki as my profiler, latest upgrade, 1.0.2.0
Using the above info, I've switched from my profile to sRGB, to manufacturer profile and others in the list...result : mine has the problem and not any of the others.
I've just spent 7 hours straight, un-installing, re-installing, LR 4.2, 4.1, Color Munki, deleting the content of the LR Preference file, re-profiling using "easy" and "advanced", trying all kinds of combinations and sequences of the above....
My findings:
1- In LR 4.1 Using my profile, and deleting the content of the " Preference" file before starting LR, everything works just fine. Then when you shut it down and re-open it, the problem is back. Using " Task manager", I force the shut down of the " Not responding" LR, go back to deleting the "preference file" content, and LR works again. This does not work with LR 4.2
2- In LR 4.1 On the last re-calibration I've done, I tried again and it did not work. Went to change profile to my default manufacturer's one and as expected LR worked....but I noticed that the calibration profile change did not affect the monitor screen, and LR 4.1 works perfectly on multiple starts and closes.
Here is the interesting part....: My Color Munki profile is still displayed on the monitor, ( I did not "Restart" or "Re-boot" ) and the selected profile is the manufacturer's in Control Panel's Color Management, and LR 4.1 works perfectly.Can it be that the profile itself, displayed on the monitor, is not really the problem?
Is it possible the "Conflict" would be in "Windows Color Management"? or LR's color management protocols?.....
I have not tried # 2 with LR 4.2 as I'm kind of chicken of going another round of hours at it.... Like the saying goes..." If it ain't brokin', don't fix it ".....
So, for now, I'll cary on with 4.1 as I can at least continue working......hopefully, using the "Sleep mode", and not "Shut down", the set-up will maybe stay "as is", and if not, I now know how to fool it.....

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

LR 3.2 Develop module not fluent but CPU not fully taxed

Hello,
on my AMD Phenom II X6 2.8GHz (Windows 7 Home Premium 64Bit, 4GB RAM) I experience LR3.2(64Bit)'s Develop module not to be really fluent. Esp. manual lens correction is sluggish. I expected the CPU to be fully taxed but I only see all 6 cores at 55-70% load. I tried overclocking the CPU to 3.2GHz but it doesn't really help. The CPU load decreases to 45-60% but there is not so much of a performance difference. I don't see a difference when I switch off writing metadata to files either. I also tried to exclude JPG, CR2 and lrcat files from the virus scanner's plan. LR uses around 950MB of ram. The catalog is around 15000 files large and I work on Canon 15MP CR2 raws (around 20MB/file).
Any idea what I could do?
best regards,
Fabian

Samoreen wrote:
Hi,
bob frost wrote:
IME a lot of this slow response to sliders etc is due to graphics card and driver problems.
Sorry Bob but I fully disagree with this. Most people having these problems with LR3 have up-to-date drivers and powerful systems. Moreover, what if Photoshop CS5, DxO Optics Pro, Bibble 5, LightZone,... work normally without any performance issue on a given system and LightRoom drives you nuts because it sometimes becomes so slow on the very same system? How could one explain that on the same system where the same display drivers are installed, LR 2 works with acceptable performances while LR 3, which is supposed to enhance these performances, brings the system down to its knee under some circumstances?
Finally, these performance problems are almost always appearing when using local adjustements on the Mac and on the PC. And this should be caused by a display driver that is not up-to-date?
I regret that Adobe have been totally quiet about these problems since they appeared and especially since the release of LR 3.2. It's obviously a bug (or a series of bugs) and they could at least advertise that they are working on a fix.
You can have the most up-to-date graphics drivers and the most powerful systems, but still suffer from bugs in the graphics drivers. Just have a look at the release notes for the latest nVidia graphics http://http://uk.download.nvidia.com/Windows/260.89/260.89_Win7_WinVista_Desktop_Release_N otes.pdf
This very lengthy document lists all the problems that have been solved and those that are still unsolved, and you will see that the driver has problems with some programs (games mainly) and not others, runs faster with some games and not others, has problems with some graphics cards and not others, etc. It is an absolute minefield of bugs/problems.
I'm not saying that Adobe can't get round some of these problems themselves, as they have done in the past, and they have co-operated with nVidia in the past to solve some of the problems. They are probably still doing so.
Local adjustments have always been the achilles heel of LR; when you read how they are done, it is not surprising that anyone expecting to do loads of local adjustments runs into problems eventually. Personally, if an image needs a lot of local adjustment, I take it into Photoshop, which is better able to do this sort of work because of the fundamental difference in the way the program works. Horses for courses!
If you have a nVidia card, and go to the nVidia Control Panel, under 3D settings you will see a long list of variables that can be altered, and the panel has preselected sets for different programs and games. A long time ago, people showed that some of these settings had a big effect on LightRoom performance.
I'm sure Adobe is working on all the problems that they know about, and that the next version of LR will have fixes for some of the problems. But they won't cure all of them any more than nVidia, which still has loads of problems in driver version 260! LR is only in version 3 (Photoshop is in version 11).
Bob Frost

Oracle SQL Developer does not browse Sybase's objects

I had installed and configured jtds-1.2.5.jar in Oracle SQL Developer for Sysbase connection. Oracle SQL Developer does not browse any objects. Why? Can you please provide a solution?

Hi,
Can you provide some more information into what you are experiencing.
What version of SQL Developer are you using?
Did you install the jtds jar under the
Tools > Preferences > Database > Third Party JDBC Driver
Is the Sybase tab available in the new connection dialog?
Did you select the default database in the connection dialog?
Can you run a query against the Sybase database from the SQL Developer worksheet?
Note that JTDS 1.2 is the only supported version. There maybe issues with other versions.
Regards,
Dermot.
SQL Developer Team

SQL Developer does not support Oracle 8i

Hi,
I was waiting a tool from Oracle like SQL Developer for a long time, finally it came, but I am a little disapointed, so Why SQL Developer does not support Oracle 8i? Other free tools like SQUIRREL can do it. I also have worked in previous projects using PL/SQL Developer and it works fine...Why a native Oracle tool can not do it?
I am in a project where we have to upgrade the Oracle database to a newer version, but I cannot have access to the old one...
I know there are some threads in this forum, and some people can work with 8i with no issues. Can anyone who works with SQL Developer and Oracle 8i please tell me how to do it?
Thanks,
--Javier
Edited by: javierlarota on Dec 9, 2009 5:40 AM
Edited by: javierlarota on Dec 9, 2009 5:41 AM

That's what I thought, the issue is more commercial ($$$) than technical. Anyway...I downloaded the version 1.1 but now I am getting an ORA-02248: invalid option for ALTER SESSION error. 00604. 00000 "error occurred at recursive SQL level %s".
Thanks,
--Javier

SQL Developer is not able to identify the Tnsnames.ora file

Hi,
I have installed the following in the laptop having Win XP:
1) Oracle 10gR2 Client software in the D: drive of laptop. Tnsnames.ora is located in this clients Network\Admin path. This client is used to access the databases on the other servers.
2) Oracle 10gR2 Database software in the E: drive of laptop. Right now there is not Tnsnames.ora file in this softwares Network\Admin path. This db software has been installed to create local databases in the laptop.
3) Oracle SQL Developer Version 2.1.1.64 is also installed in C: drive of laptop.
The problem which now I'm facing is that the SQL Developer is not able to identify the Tnsnames.ora file mentioned in the above point-1 which contains entries of databases on the different servers. Could you please help me out in solving this problem?
Thanks in advance.
MAK

I forget what version I was using at the time, but when I had an ORACLE_HOME defined for the environment and TNSNAMES file defined in SQL Developer (different one than was in ORACLE_HOME), that I would see results from both tns files. I don't know if that is still the case. I have since dropped my ORACLE_HOME environmental variable.

Development is not available in the productive tenant

Hi experts,
We are Request a Productive Tenant by the Test Tenant using the "Control Center Service" work center.
The development are assemble and download from the test tenant and update to the productive tenant with sucess.
The development in the productive tenant was activated and your status is developed.
But when we access the SAP C4C solutions the development still not available for the use.
Anyone know whats happening ?
Follow the screen of SAP Cloud Studio Application in the Implementation Manager:
Follow the BAC configurations
Regards

Hi Anderson,
1. Also have you check the option in Business Configuration--> Edit Project Scoping in production tenant to enable your solution?
2. Also check if the user you are using have the authorization for the dependent object to access it?
3. We have selected the first option to create the BAC element with Business Option and successfully was able to have the solution on the production tenant.
Also check the below guide for same:
http://help.sap.com/saphelpiis_studio_1502/studio_od_1502.pdf
Topic : 8.2.3.2 Create a Business Topic and Business Options
I hope this will be helpful.
Regards,
Mithun

Connection ... able to connect using sql developer, but not sqlplus or toad too

Hi folks, having this issue, with only one of my so many databases, what might be the reason and how to fix/correct this, please assist.
Able to connect using sql developer, but not sqlplus or toad too; sqlplus error: ORA-12154: TNS:could not resolve the connect identifier specified
thanks in advance.

SQLDEVELOPER works since it use JDBC Thin & does not use tnsnames.ora
ORA-12154 ALWAYS only occurs on SQL Client & no SQL*Net packets ever leave client system
ORA-12154 [B]NEVER[/B] involves the listener, the database itself or anything on the DB Server.
ORA-12154 occurs when client requests a connection to some DB server system using some connection string.
TNS-03505 is thrown by tnsping & is same error as ORA-12154 thrown by sqlplus or others.
The lookup operation fails because the name provided can [B]NOT[/B] be resolved to any remote DB.
The analogous operation would be when you wanted to call somebody, but could not find their name in any phonebook.
The most frequent cause for the ORA-12154 error is when the connection alias can not be found in tnsnames.ora.
The lookup operation of the alias can be impacted by the contents of the sqlnet.ora file; specifically DOMAIN entry.
TROUBLESHOOTING GUIDE: ORA-12154 & TNS-12154 TNS:could not resolve service name [ID 114085.1]
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

Developer does not start

Hi,
I had installed SQL-Developer on my laptop, connecting to a server and it was running OK.
Suddenly it hanged, windows was restating (without any interaction) and SQL-Developer was not startable anymore !!!
What's wrong ?
Heinz

BSOD?
If not a BSOD, do this and paste the results here:
http://www.oracle.com/technology/products/database/sql_developer/files/faqs.html#q2
If BSOD, I would suggest running a virus scan. I can't imagine what would cause a java application to kill windows. If that comes up empty, reinstall java..if that fails, reinstall windows.
Eric

I have creative cloud but Lightroom 5 develop does not work. What do I need to do to get it working

I have creative cloud but Lightroom 5 develop does not work. What do I need to do to get it working?

If lightroom downloaded and installed without any errors, you will get better help with program questions in the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom

Develop Preset display in Quick Develop is NOT Hierarchical

Similar Messages

Maybe you are looking for