Develop settings did not transfer in Lightroom 5

Hi, when I upgraded my catalog from Lightroom 4 to Lightroom 5, it appears that not all of the my develop settings transfered for all photos.  If I am to open the catalog in Lightroom 4, the appear to still exist.  How can I see all the settings in Lightroom 5.
-Thanks Todd

Hey ssprengel,
No, I can't really make sense of any pattern.  I edited almost all of my photos directly in Lightroom 4 using the develop module.
When I purchased Lightroom 5, I attempted to open the catalog I had used with Lightroom 4 and it told me it would be upgraded.  I confirmed the upgrade and this is the new catalog I work with in 5.  This is the catalog that does not consistently show me my develop settings from 4. 
When I have upgraded Lightroom in the past, I had not run into this problem.
I do understand that I now have two separate catalogs, but in my experience, I had always thought that these settings would transfer as I did not start a new import or make a copy, all I did was upgrade the catalog.
Thanks,

Similar Messages

  • IGoogle settings did not transfer over from IE 8 to FF4.

    Hmm...
    I had an iGoogle page in IE 8, but the settings did not transfer over to a new install of FF 4?
    What might be the problem and can stillI migrate those setting to FF 4?
    Thanks.
    P.S. It worked fine on another system with the same configs. Strange.

    Playlists are part of the iTunes Library.itl file, so if you just moved the music folder, your playlists would not have transferred. This site might be of help:
    http://lifehacker.com/software/itunes/geek-to-live--how-to-move-an-itunes-librar y-from-a-pc-to-mac-and-back-242468.php

  • Cannot paste develop settings to multiple images in Lightroom 3

    I have just started using Lightroom 3 and am only able to paste develop settings to one image.  If I select multiple images it will only paste the setting to the active image, not all selected images. I never had this issue with Lightroom 2.  Is anyone else experiencing this problem?

    Hi Dorin
    I think the complaint is still valid - there should be no reason that you should have to toggle to Auto Sync before being able to paste your develop settings to the entire target selection, not just the active image in the selection. It should work with that switch toggled to Sync mode as well -- there is obviously a bug here.
    I am having the identical problem as the original poster. I am using LR 3.3 on a Mac, OS 10.6.5, in other words I cannot get develop settings to copy to all my selected target images while I am in the Develop module, only the active image within the target images, without toggling the Sync button to Auto Sync.
    This even after the release notes for 3.3 say they have corrected for the problem "Paste Settings did not apply to all images in the Develop module Filmstrip" (see http://blogs.adobe.com/lightroomjournal/2010/12/lightroom-3-3-and-camera-raw-6-3-now-avail able.html)
    This is silly. How do we ask Adobe to correct this bug?
    Cheers
    Adam

  • HT204053 I recently changed ny Apple ID but it did not transfer over to my iCloud account. How do I change my iCloud ID? The login popup for iCloud will not go away so I cannot get into my iPad since it pops up as soon as I turn the device on.

    I recently changed my Apple ID but it did not transfer over to my iCloud account. How do I change my iCloud ID? The password for the new Apple ID does not work since the iCloud default user name is imbedded in the login box. The login popup for iCloud will not go away so I cannot get into my iPad since it pops up as soon as I turn the device on and re-occurs every few seconds.

    You have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPad on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I recently purchased a 4S. I now have 2 files in my iCloud both with my name. One from my 3gs and one from my 4S. The problem is the data history of all my games and 3rd party apps did not transfer over to my 4S. Is there a way to merge the two in icloud?

    I backed up my 3gs to the iCloud and when I synced my 4S, it did not transfer my game histories or my 3rd party app histories. When I look at my iCloud storage, it shows both phones under the same name. Is there a way to merge them together in iCloud? I tried adding the account to my 4S but since they are both named the same, it says I already have that account added! Help!!

    Welcome to the Apple Community.
    Assuming you have finished with your old backup.....
    You can see what your iCloud storage is used for and delete any unwanted content at settings > iCloud > backup & storage > manage......

  • My custom ringtones on iOS8 did not transfer

    My custom ringtones did not transfer to my new iPhone6.  What happen and how do I recover them.  I noticed the iOS8.0.2 update stated something about Ringtones.  I also don't see them in my iTunes but still have them in my previous iPhone5S.  How do I transfer them between the two devices?

    Y'know, this is an inSANE process.  Apple should be ashamed of themselves for doing this.
    It's possible - but it's hardly 'intuitive'....as Apple so euphemistically likes to portray their software as being...
    In macro terms, you have to:
    1 - import whatever track or mp3 you want to make your ring tone into Garageband...on your laptop....as a track.
    2 - edit it to whatever length you want it to be in GB.
    3 - 'Share' it as a Ringtone-to-iTunes from GB to iTunes.
    4 - Plug your iPhone into your laptop.
    5 - Somehow, some way, locate the stupid track as a 'Tone' in iTunes...which really isn't intuitive at all.  Good luck on this step.
    6 - Click and hold on that track to force iTunes into opening up the device list on the left (this is REALLY ridiculously UNintuitive)
    7 - Drag and drop the track to the iPhone device that has now magically appeared from the abyss on the left. You will get ZERO indication that it actually happened.  I guess they think you should trust them that it happened.
    8 - Knock on wood and go to your phone's Settings; Sounds: Ringtone...and hope like heck the title of whatever track you've babysat throughout the process somehow miraculously shows up under "Ringtones" - and click on it.  A checkmark will appear if you did it right.
    Reaching back to my Android memories, the steps involved with it were:
    1 - Music
    2- Highlight track
    3 - Click on settings button
    4 - Choose 'Set as Ringtone'
    I love many things about Apple, but iOS isn't one of them.  It pretty much stinks.

  • My iPod 5 will not sync ANY music. All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    All my music was on prior to syncing. The sync deleted all my music. I can now no longer add any music. I have the "sync music" checked. Restoring factory settings did not work. Any thoughts?

    When you synced with iTunes It would have tried to replace the music on the iPhone with what is on the computer. which is what happens when you sync with iTunes.
    If the songs are purchased you can re-downloaded them Pretty easily. You mentioned that you still see the songs and that you could not play them. Do they have a Cloud symbol next to them? If so this means that you can download them but that they are not on the device.

  • My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion).  How do I get all my stuff to appear when using Mavericks?

    Will someone please help me?
    My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion).  How do I get all my stuff to appear when using Mavericks?
    My email did transfer over.
    Thank you.

    First click on the Apple > Logout and Log back in or restart the unit see if that solves it.  If it doesn't do you have a backup of your system prior to upgrade?  Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

  • ITunes music files did not transfer afte rebooting OS software

    hi there
    I had to reboot system 10.3 software- I was happy because I had everything backed up on a Lacie external drive that i had formatted as a bootable disk. So when my iBook came back from the repair shop with a new blank OS and asked me if I wanted to transfer files from another computer, I did, from the Lacie hard drive. Only my iTunes music did not transfer, and so far it seems like I have to import files one by one- I can not figure out how to import the whole lot of music files.
    Additionally, all my other files, mostly Word, were imported with the "created on" date all set to 1970, for some reason. That is annoying; any ideas from anyone? Thank you very much
    F
    iBook G4   Mac OS X (10.3.9)  

    ctblubird wrote:
    Hello
    A couple of years ago, I purchased my first MAC OS X 10.7.5
    I transferred my iTunes library from my old PC to the new MAC.
    You transferred your library to your Mac a couple of years ago?
    Or you have been using the Mac for a couple of years and just now transferred the library?
    I followed instructions,
    What instructions did you follow?

  • I have photos in photoshop that did not transfer

    I have photos in my photoshop that did not transfer to Adobe Revel.  What can I do about this?  I don't want to lose them!

    Laurel,
    I did check your Revel account information as I did see that there was 2,303 images that were transferred from Photoshop.com to Revel. If you log into Adoberevel.com and look in the upper left as you will see in the drop down menu a library titled Photoshop.com. Only jpg files were moved to Revel. It appears that you  may of had other media files that were not jpgs in your Photoshop.com account.
    If you want to download your other media files to your computer, then please
    do the following as this need to be done before June 18, 2013.
    1. Install the Adobe Air application http://get.adobe.com/air/
    2. Click on this link to install the Adobe Media Down loader
    http://www.photoshop.com/misc/membership-faq#downloader
    Let me know if you have any issues downloading your files
    Scott

  • Keynote: I downloaded the update on Keynote and the fonts did not transfer. How do I transfer fonts. Needing them for Presentation this weekend.

    I downloaded the update on Keynote and now have the new system. The fonts did not transfer. I need them to transfer ASAP. I hve a presentation this weekend.

    You might still be able to use the old version ('09).  Updating Keynote causes the previous version to move to a new location.  Open the applications folder and look for a folder named "iWork '09".  The previous version of Keynote will be in there.

  • I purchased a new MacBook Pro and when transferring files iphoto did not transfer.  I have a question mark in the place of the icon.  My pictures are in library but can't properly access iphoto.  Thank you

    I purchased a new MacBook Pro and when transferring files iphoto did not transfer.  I have a question mark in the place of the icon.  My pictures are in library but can't properly access iphoto.  Thank you

    Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac.  You should be able to set a password for it. Save it.  Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer,  I suppose,  back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity.  As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
    you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
    This handy article from Apple explains how
    How to move your iTunes library to a new computer - Apple Support''
    don't forget to de-authorize your iMac if you don't want to play purchased stuff there
    and re-authorize your new macBook Pro
    time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine  and go for it.  You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups  of your stuff.

  • Using iTunes I moved my vacation photos onto my iPad3; however, some of my videos did not transfer even though I clicked on "include videos" in iTunes.  How do I get these videos to load onto my iPad?  Thank you.

    Using iTunes I transferred my vacation photos from my MacBook to my iPad3.  Some are videos and some of them did not transfer onto the iPad.  One transferred into the photo album and worked as a video and also transferred into the Video album.  These videos were shot with a Pentax camera and have the extension .MOV.  How can I get them to transfer to the iPad3?  Thank you.

    The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Do your .mov files comply?
     Cheers, Tom

  • HT4972 I did not 'transfer purchases' prior to loading iOS 5. In particular I really miss my Good Reader app... Any suggestions as to retrieving?

    I did not 'transfer purchases' prior to loading iOS 5. In particular I really miss my Good Reader app... Any suggestions as to retrieving

    Try Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519

  • ACR Develop Settings feature not working

    I have been using Bridge and Camera Raw to process images. I make adjustments from one image to many others using the Develop Settings feature. I don't know what changed or why, but when I now open a raw file in Bridge, Photoshop opens, and I seem to be working in Photoshop's ACR, instead of Bridge's ACR. When I click "Done," I go back to Photoshop and not Bridge, and the Develop Settings menu is grayed out. Right clicking doesn't work because Develop Settings is not even listed there. I have checked all the settings for Bridge and ACR and Photoshop, and I can't find anything that is different or not selected. I think my program might be corrupted.
    Anyone have any ideas? I am running Windows XP 64 bit edition with 8gbs of RAM. I've been using this system since February with no problem. Help!!! I have work to do!!!

    I found another post with regard to a completely different problem, but the solution suggested was to purge the cache for the folders, one by one. I purged the cache for the folder where I started having the problem, and now everything seems to be working well again.
    I'm using CS3 with Bridge 2.1.1.9

Maybe you are looking for

  • Multiple ASM instances on a single node

    Can i have multiple ASM instances on a single node? This is to have each instance supporting different environment dev,stage etc Thanks Sannidhi

  • "Could not save as a PDF because of a program error"

    Saving a Photoshop file as a PDF for emailing to someone else has always been complicated by the number of choices to be made, and now it's become impossible. Every time I try it now, I get this message, and I have to send a jpeg instead. I've tried

  • What have I done, how do I correct it , delete or even find it

    Have been trying to take a 'last import' and write it to toast, not sure why I can't do it or even make a folder for them to go in to but I cannot, but in any case I imported what I thought was a bunch of folders in my last 'import' to a folder I mad

  • Adding additional fields to an Infoset Query

    Hi Experts, I have added a couple of additional fields to an infoset query using SQ02. I have also written code for filling in the fields. I have also added them to some Field Groups. Despite this, when I run the query, they are not being displayed i

  • How to create Decision Node in Data Flow diagram under Process Model

    Hi, I am starting a new project and would like to use Oracle Data Modeler for my data flow diagrams and logical/relational diagrams. Could you please guide me how can I ask Decision question in data flow diagram. Ideallly i would like to create a Dec