Develop to Library
When I sharpen an image in Develop, the changes do not stay when I go to Library. How do I fix the changes?
Sometimes the Library previews can look slightly softer. When you go into Develop the previews are updated (you may see loading…) as LR references the original file. Your images should look good on export, when you apply output sharpening when LR will use an algorithm based upon the export settings and file size.
Similar Messages
-
Can't get title and time/date from appearing over photo in Develop or Library
I must have done this when I was trying to do some other keyboard shortcut and got the wrong one - and now I can't figure out how to get rid of it. But a few weeks ago, I did something and now the file name, date/time and image size appear in white text over the top-left of any photo I have in the Develop or Library screens:
So you can see "_MG_0955.CR2" and the other details in the clouds there. Does anyone know how to get rid of that? I can't find anything in any of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.
Thanks!Ltter I on you keyboard cycles through the info of the Loupe View (same in Develop Module).
You set what you want to see by pressing Cmd. + J - and select the parameters for Info 1 and Info2.
Letter I cycles thus: Info 1 - Info 2 - No overlay. -
Different view to develop and library module
Hello everyone, I have a big problem during my workflow, or when working images from the development at the end of the work as the images are like me and very sharp. But when I see in the library module are not sharp and the blacks are very mordibi. Below I post the link to see for yourself.
MODULE DEVELOPMENT:
MODULE LIBRARY:
The problem is that when I export my image is identical to the form LIBRARY and not that beautiful clear form DEVELOPMENT. So I find myself not export images with crisp blacks and dishes.
I already tried to delete the cache, but does not change anything, and I use 1:1 previews, you have no idea how to fix my problem?twenty_one wrote:
Ah, now I see the rightside of that screenshot, with, as you say, sharpening 150 and NR 0. That's a combo it would never even occur to me to use, not in a hundred years...
Anyway, I tried this with an ISO 1250 shot, but couldn't see any differences anywhere. But maybe you need to go higher.
I've learned to never take anything for granted when reviewing LR forum posts. An ISO 1250 shot is probably too low with most DSLR cameras to see this issue. On my 5D MKII I could really only see the "lightening" between Develop and Library views with ISO 6400 raw images. It may also show up at lower ISO settings with images that are heavily underexposed (i.e. LR Exposure +1 and greater), and with smaller sensor cameras (1.6 crop, P&S).
Gianlu24, keep in mind that Adobe increased the Sharpening amount from '100' in LR3 to '150' in LR4 when using a high 'Masking' setting. For most normal images and Masking settings you should use a Sharpening amount below '100.' There are two basic types–Capture and Output sharpening, each adjusted using separate controls. In addition you can apply both Global and Local Capture Sharpening in LR. These three articles by Laura Shoe may be helpful:
http://laurashoe.com/2011/08/21/sharpening-in-lightroom-part-one-overview-and-capture-shar pening/
http://laurashoe.com/2011/09/27/creative-sharpening-in-lightroom-sharpen-eyes/
http://laurashoe.com/2012/07/11/sharpening-in-lightroom-part-three-output-sharpening/ -
Develop module & library module aren't matching
When I am editing, my photos look how I want them to in the develop module, but when I switch over to the library they look different. Some photos it doesn't apply the clarity, highlights, noise reduction, or sharpening. I haven't had this problem up until a month or two ago. It used to be the same between the two modules and I no problems editing. Now it's a pain to edit because I have to switch to the Library to see what the image is really looking like, go back to develop to try and change it, but cant end up getting it to look how I want. Images look the same zoomed in, but not in normal view. I am on Windows, Lightroom 3.6. I have tried reupdating the software, downloading an older version. also updated my video driver, and nothing helped. trying to avoid reinstalling all of lightroom because I do not want to lose any previewly modified images.
first one is the view from develop. you can tell its a lot more noisey.
second picture is from the library. it's a lot more smooth.
so basically my images aren't being shown correctly. I have looked through a lot of discussions on here and no one seems to have an answer...please help me! editing should be fun, not frustrating.Rivosyke wrote:
Thanks for the response. This appears to be more the issue with image that is exported is using the algorithm for the library module as opposed to the changes made using the develop module. The histograms are different when switching between the two modules (Library/Develop) for the same image.
Camera: D7100
Image Type: RAW
ISO: 3200
Bingo! You're using an ISO 3200 image with fairly high sharpening settings, which is going to increase noise in the image. If you view the image at 1:1 in the Develop module the noise should very visible. The Develop module and Library module 1:1 previews should both show the noise and look very close to each other. The reason why less than 1:1 Zoom previews (i.e. Fit, Fill, 1:4) and histograms look different is explained in my reply #29 under this heading MORE THAN YOU PROBABLY NEED TO KNOW (For Techno Geeks & Nerds Only). The Export module uses the same Bicubic algorithm as the Library module, which is why the Library module's preview is more accurate than the Develop module. Virtually all image editors (not just LR) use the same Bicubic resizing algorithms and will produce the same discrepancy when compared to LR's Develop module preview.
Fortunately there is a very easy solution to this issue. Unfortunately many people prefer to complain, say it is a LR "bug," and don't listen further to suggestions on "fixing" the issue. If you fall into the latter camp don't bother reading further! Sorry if this sounds crass and cynical, but I can only provide advice. Whether you believe me and try it is your decision! It works for me using five different camera models with both raw and JPEG image files.
High ISO and/or High Sharpening Preview Discrepancy Fix
1) Set Develop module to 1:1 Zoom View.
2) a. Adjust Sharpening panel settings for desired look.
b. With noisy images it's best to keep the Detail setting no higher than 35.
c. Try using the Masking slider to reduce noise in even toned areas.
3) Increase Detail panel Color setting until the color noise is barely visible.
4) If there is still some residual color noise try increasing the Color detail setting to ~80.
4) Increase the Detail panel Luminance setting until noise is barely visible or gone.
5) If the image has lost significant sharpness try increasing the Luminance Detail setting to ~80.
6) If necessary go back to steps # 2-5 and make small adjustments to the Sharpening and NR settings.
Now compare the Develop and Library previews at Fit view or better yet at 1:8, 1:4, or 1:3. They should look very close to each other with the Develop preview very slightly sharper. Full-size and reduced size Exports should look very close to what you see in the Develop module. When Resizing images don't forget to add Export Output Sharpening. When images are Resized the Output Sharpening setting has more influence on image sharpness than the LR Develop Sharpening settings. For most images the Screen Standard setting should produce crisp images. If you want more try the High setting. I generally find the Screen Low setting produces the most natural look. YMMV dependent on lens performance, camera shake, focus issues, or simply poor lighting (cloudy, foggy, etc.). -
Tonal change between develop and library module
After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple? Shooting with a nikon d5100 with ADL turned off as per other similar problems brought up in this forum. Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.
dennis4g1 wrote:
After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple?
Are you using a calibrated/profiled monitor? In Develop module, LR displays in ProPhoto colour space, in Library module it's Adobe RGB. If the monitor doesn't have a proper profile there could be differences in view between Develop and Library. However I would have thought LR would default to assuming monitors behave like sRGB if there's no profile (or no colour space info in the profile).
dennis4g1 wrote:
...Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.
The usual cause for that is that Adobe can't read Nikon proprietary metadata such as Picture control settings. If you shoot with the Nikon Picture Control setting (Standard, Portrait or whatever) at default settings, and if you use the corresponding profile in Lightroom's "Camera Calibration" panel (Camera Standard, Camera Portrait etc) then the appearance should be very close to the out-of-camera jpeg preview appearance. -
Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this
On your iPhone ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Date & Time
Switch: Set Automatically ON
No data is lost due to a reset. -
after editing my photo and specifically using noise reduction i will go from develop to library so that i can export it but when i do the oise reduction disappears. any ideas?
It could be just a lag in the updating of the thumbnail shown in the Library. Wait a few seconds and see if it updates.
Since what you see in the Library is just a thumbnail, the data being exported comes from elsewhere and is recalculated each time you do the export. -
5d Mark II Images not same in Develop and Library Module
Hello,
I am having trouble with the Raw fies that have been adjusted in the Develop Module loosing all of their luster and pop when switching back to Library and exporting. In other words, my adjustments are generally flattened out and colors muted when going from Develop to Library. I see that the Camera Calibration shows only ONE profile option: Matrix. However, the same single option for my 7D is also Matrix but the Raw files appear to hold my adjustments after being made in the Develop module.
I am using LR 2.7 and Camera Raw 5.7.
Please advise what needs to be done to get my images looking how I want them too and holding the adjustments.
thanks
todd bigelowSorry, but also noticed that this appears to occur only on the images with higher contrast, beautiful light that is vibrant and saturated. On other images that don't have the same intense, late afternoon colors, the adjustments seem to hold fine.
Meant to say "losing" in original post, not "loosing".......
thanks again for any recommendations -
Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.
That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup: -
How to develop a Library for Windows Phone 8.1?
Hello guys!
I'm a quite new developer in this topic, I have never created a Library and right now, I need to create a library using this project of C because the normal OCRs cannot recognize 7 segments display:
https://www.unix-ag.uni-kl.de/~auerswal/ssocr/
Last year, I used a library for SQLite (in the beginning it didn't have a Nuget package) and you must add a C++ project to execute SQLite code in WP8. I hope someone might give me an idea where to read and help me with this project. Thanks a lot
for your worthy knowledge.
Federico NavarreteI need to use a special OCR that detects 7 Segments Displays. I have been reading during the week and I discovered that the most similar project is this one:
Seven Segment Optical Character Recognition
However it's a C project not a C# or VB and I must create a special library (or project) to integrate with my Windows Phone App. As I said before last year I used this article:
How to use SQLite in Windows Phone
And in the beginning it was just a C++ project that you must add to manipulate SQLite. So, I think I should create something like that for migrate those libraries and later integrate with my project but I have never worked with this kind of libraries
or create C/C++ libraries that finally will work with a C# App. Thanks for your time.
Federico Navarrete -
Not saving changes from Develop to Library
Not sure what I am doing wrong. I have made my changes, and am ready to export them to JPEG, however, it is reverting back to the original on both the Library tab and in the exported image. When I click on Develop, it is perfect.
Is there a step that I am missing, or a setting somewhere, I may have overlooked?
Thanks!Try this links:
For Windows
ftp://ftp.adobe.com/pub/adobe/lightroom/win/3.x/
For MAC
ftp://ftp.adobe.com/pub/adobe/lightroom/mac/3.x/
// Jani -
Option to allow filmstrip to work the same in both develop and library mode
First of all, let me say that one of the greatest features that LR2 brings to the table it the keyboard shortcuts for adjusting things in develop mode. That is the single improvement that has really made a HUGE difference in editing images the way I work.
I'm so happy to be able to get almost everything on the keyboard, that I wanted to point this out.
When in library mode, I can select a series of images in a row using shift + an arrow key. When I'm done adjusting the images, I can press the right arrow key, and I've now effectively deselected all the previous images, and gone on to the next one. This is intuitive and makes sense to me.
But in Develop mode, pressing the right arrow key swings me back around to the first image on the left.
Perhaps for the way some people works, this makes a lot of sense. For me, there's no reason that I would need to do this.
Of course I can deselect all photos (apple-D), but then to get back on track, I have to go to the mouse to select the next image. I would like the option of having the filmstrip act the same way in both modes.
Another solution would be to continue to allow the "Select only active photo" shortcut that is available in Library mode, but for some reason is not available in Develop mode.
Yes, this is a small change, but I feel like things are getting so close to perfect that I wanted to chime in with something that in the end I think will really help to speed up people who have to work through and adjust a large number of images.Hi,
If the songs were purchased from itunes, I suggest that you delete the tracks from your itunes library and move to trash (providing you live in a country that permits redownloading). See http://support.apple.com/kb/PH12283.
Jim -
I DELETED SOME OF LIGHTROOM MODULES, ALL BUT DEVELOP AND LIBRARY
Several versions ago, possibly 3.6, I deleted several of the lightroom modules, all but LIBRARY and DEVELOP.
Now I need them all. I have installed 4.4 but the modules have not returned to the top of the LR window.
I cannot remember where I might have stored them on my HD or what their names are, and believe I have reinstalled my system since then anyway.
Is there anyway I can change my preferences, or something, and then reinstall LR so as to get the entire list of modules, such as SLIDESHOW,ETC.
Of course I have my catalog backed up but perhaps this can be done simply.
At the time I had a purpose but now I want the capabilities of the entire program.
thanks,
Vince
Message was edited by: vinsoloJohn,
Thank you so much. I was making too big a deal of it. I assume, now, after your answer, that the modules were indeed installed with the update and that I needed only to follow your instructions.
I feared all kinds of unhappy problems.
I AM ALMOST HAPPY!
thanks again,
vince -
Ratings Affect Navigation in Develop and Library
Every time I make any "gestures" regarding ratings, be they assigning stars to a file or flagging, navigation is affected.
Say I rate an image at four stars. Lightroom advances the veiw to the next file in the filmstrip.
This navigation issue occurs in both library and develop modules.
How might I remedy this situation?
Thank you.Do you have SHIFT-LOCK on ?
Turn it off.
Frans -
Failed to load NI-Vision development module library
Hi all,
I am using Labview 2014-64 bit with vision, but every time I try find some vi in vision development module llb I get this error msg:
failed to load dynamic library because of missing external symbols.
screenshot attached.
I tried to load vision development with selecting 64 bit support twice but still getting the same error msg.
can any one tell me where can be the problem.
thanks
Attachments:
Capture.PNG 19 KBHi AnkitG,
One thing to make sure of is that you have installed the correct version of software. You would need Vision Development Module 2014 f1, which can be found here:
http://www.ni.com/download/vision-development-module-2014-f1/4971/en/
If you are installing from a CD, please try uninstalling and then reinstalling using the link from our website and then follow these steps:
http://digital.ni.com/public.nsf/allkb/7B71A26E9B4891C6862577C9007B3F27?OpenDocument
Please make sure the version of LabVIEW selected is the one you are using. After restarting the computer after installation, please try to access the pallette again.
Paolo F.
National Instruments
Applications Engineer
Maybe you are looking for
-
Transfer domain to Business Catalyst from another host
I have redesigned my first website in Muse and want to host it on Business Catalyst. My client is currently using another host. How difficult is it to make the transfer using the existing domain?
-
View then modify content of xml file.
I am new in Java world and my background is database admin. What I am trying to achieve here is write a small java scripts code which would open connections.xml allow user to update connection definition. So here is what I do using java scripts, I lo
-
IPhone problem - Apple don't seem to care
I have had my iPhone for about 6 months. Have been having intermittent audio drop outs during calls, took it into the Apple shop a couple of months ago. They blew some compressed air through it and told me to try it again. It still is having problems
-
Using "Same As" in a Formulas Row - FR
I am wanting to use Eval(Grid1.[1],[2]) to find the differences between 2 rows which have different Versions and Scenarios. The catch is I want to use expansion, so I think I need to combine "Same As" with a formula. But I can't figure how to put "Sa
-
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue.