Developement Mode extensions are not loaded by Photoshop CC after 14.2 update

I keep my HTML5 extensions in /Users/myaccount/Library/Application Support/Adobe/CEPServiceManager4/extensions.
I do have Debug Mode enabled using cli tool: https://github.com/davidderaedt/CCEXTCLI/blob/master/setdebugmode.sh
In manifest.xml I have "<Host Name="PHXS" Version="[14.1,14.9]" /><Host Name="PHSP" Version="[14.1,14.9]" />"
I do have all required settings in Preferences->Plug-ins enabled (allow extensions/panels/internet connection)
Before 14.2:
Everything was fine, all extensions were loaded without any problems.
14.2:
No extensions are loaded, no errors are reported, it just seems that Photoshop CC does not load any extensions
When I install same extension using .zxp package then Extension Manager installs extension correctly and it is working so its not extension code issue I guess.
My system information:
Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
Operating System: Mac OS 10.9.1
Is it possible to temporary rollback to 14.1.2?

The problem was that I had nested directory structure of extension like: ".../extensions/extension-folder/something/else/CSXS/manifest.xml" -> I changed directory structure to have ".../extensions/extension-folder/CSXS/manifest.xml" and it solved the issue. Nevertheless Photoshop 14.1.2 was accepting deeply nested directory structure of extension and 14.2 does not. I found also another issue but I will post it in another discussion.
Thanks.

Similar Messages

Extensions are not loaded while boot

Hi there!
I have the problem, that the driver für my firewire audio interface and the driver for my dsp cards are not loaded while booting the system...
How can I activate these extensions?
Thank you for support!
Cheers
André

Are you talking about kext's? Did you check that they are even there (look in /System/Library/Extensions or type kextstat in terminal).

3D Mode Tool are not working in Photoshop CS6

Hello everyone. First, I want to tell you that I use ATI Radeon HD 6730M with 12.2 driver series. and I just found out that my Photoshop CS6 3D mode tool not working in advanced drawing mode, like this.
As well as normal drawing mode. Please help to fix this problem.

When you changed the options in the Preferences - Performance - Advanced Options section, did you close Photoshop and restart it before testing? That's necessary or you won't be testing what you think you are.
Assuming you have done so, if you have exhausted the various GPU options, I don't think you have any other options beyond waiting for a new and improved display driver. I suppose it's possible the Adobe folks might improve their code to make it work better on different setups, but generally speaking these kinds of things seem to be glitches in the display driver.
I just tried a similar operation to what you're doing on my Radeon HD 5670 with Catalyst 12.6 drivers and it seems to work okay.
-Noel

Extensions are not available in Photoshop CC 2014

Photoshop CC 2014 installed, but the menu window is not active extensions.
In the preferences to the plug-in is active "load panels extensions"
I also tried deleting the preferences when you start Photoshop, but it does not work

Sorry,
I found it thanks. I had not seen

PSDX files are not loading in Photoshop even with plugin

I installed the Touch App Plugins from the Creative Cloud apps but when I try to open the files in Photoshop CS6 I just get a Windows error "Could not complete your request because it's not the right type of document".
Is there some other way to load them?

Here's the problem.
You need the AdobePSDXFileLoader.plugin , which should be installed by Touch App Plugins. However, the installer does not check for PS CC. If you still have your Adobe Photoshop CS6 directory around you can copy the file from there. Even if you've uninstalled, by default the uninstaller will leave the directory for anything that PS CS6 did not install (ie, plugins).
If you don't have PS CS6 installed... Well, you're going to have to install it. Install it. Uninstall Touch Apps Plugins, if you have it installed. Then install Touch Apps Plugins to get the plugin file, and copy it to the plugins directory of your PS CC install. Restart Photoshop, and it will be able to open PSDX files.
Here's the bit from the logs that proves the installer doesn't know about CC:
08/20/13 16:46:38:883 | [INFO] | | OOBE | DE | | | | 116653 | TAPI: (1) Populate INSTALLDIRS
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Checking...
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | Adobe Illustrator CS5
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Error getting installed state. Treating as not installed
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Checking...
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | Adobe Illustrator CS5.1
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Error getting installed state. Treating as not installed
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Checking...
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | Adobe Photoshop CS5 Core
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Error getting installed state. Treating as not installed
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Checking...
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | Adobe Photoshop CS5.1 Core
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Error getting installed state. Treating as not installed
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Checking...
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | Adobe Photoshop CS6 Core
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Error getting installed state. Treating as not installed
08/20/13 16:46:38:884 | [INFO] | | OOBE | DE | | | | 116653 | CAPS: Closing PDB Session
08/20/13 16:46:38:888 | [INFO] | | OOBE | DE | | | | 116653 | TAPI: No Products installed. Exiting silently
08/20/13 16:46:38:888 | [INFO] | | OOBE | DE | | | | 116653 | TAPI: END

LBWQ entries are not loaded to 2LIS_02_SCL queue after run RMBWV302

Hi Guys,
I have some strange problem in R/3.
We are using two PO extrctors 2LIS_02_ITM & 2LIS_02_SCL to load data, both are working fine. The problem is when the user changes a PO (like G/L account change EKKN-SAKTO or changing sales person EKKO-VERKF) then delta entry will be created in MCEX02 queue (LBWQ) and the job to empty the entries to RSA7 queue was successful, the problem is here the SCL datasource shows 0 records in it where as ITM DS shows one entry in it. Even if I load data SCL brings 0 records and ITM brings 1 (changed) record......
What needs to be done to capture it in SCL extractor, any settings needs to be done???

Hi,
I have faced the same kind of issues; some we solved by implementing an IObj reflecting the PO#/Item# (compounded), having Nav Attr on it. The master data for this IObj is updated while loading the deltas of ITM and HDR.
Otherwise I also investigated a sophisticated scenario, which works but quite complex:
- the HDR and ITM deltas are also passed to the SCL content
- the start routine get all the corrresponding SCL loaded in the target, generates a reversal record for each of them as well as the same records again enhanced with the required objects...
This way would accurately store updated data howver it is a bit expensive.
hope this helps...
Olivier.

Itunes store not loading on iphone 5 after ios 7 update

I rescently updated to ios 7 and now my itunes store does not work. I open the app and it shows the little loading symbol in the status bar next to the wifi signal, after a few seconds its stops loading and allows me to scroll but the page is completely blank. All of the little tabs at the bottom still are clickable but they do not display the propper page either. iTunes radio also will not allow me to look at the song info and click the options button (??) next to the option to buy the song. All help is appreciated
i have already tried some of the other options i have seen online:
turning phone on and off
hard restarting phone (home and power button)
logging out of itunes store and app store
logging out and hard restarting
connecting from both wifi and cell

The music player does not remember where the last session ended. I have about 1000 songs on my iPhone. I play the songs in the Shuffle mode - and it worked fine on iOS 5.x. Ever since I updated to iOS 6.0, the shuffle seems to be seriously broken. It repeats the song sequence of previous session in the exact order instead of starting from where the session ended. God forbid if your last session was 10-25 songs long - you'll have to hit the Next song so many times to listen to something that you have not heard for a while.

HT1338 my speakers are not working on my macpro after mountain lion update.

I need my speakers to work and its not functioning any more please help.

Your spearkers may have a problem or your your connection to your computer may be very weak

HT201272 some of my apps are not on my home screen after the ios6 update... how do I get them back?

so i had a number of apps on my homescreen and after the update they disappered. So I go to the app store to re-download them but all it gives me is the option to open them. can someone help me get my apps back, without having to go through 8 processes to access them. thanks

go to settings>general>reset>reset home screen layout and see if they appear.

Blendmein extension is not working in photoshop cc 2014

I installed add-ons from adobe add-ons website but add-ons are not visible in windows>extension...

Many Photoshop extensions are not compatible with Photoshop CC 2014 for Adobe removed support for Flash Panels in CC 2014. Many extensions panels are flash based. Check with the developer to see if their blendmein extension works with CC 2014.
Adobe does not maintain Photoshop so it backward compatible with prior versions of Photoshop. This brakes things like action scripts plugins extensions etc. Keep old version of Photoshop installed....

Images are not loading - but work in Preview mode

Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.

Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-)

IE 11 cross origin images are not loading in canvas

S3 image urls are not loading in canvas for the first time ,image loads if the refresh the screen or the developer tools is open. To reproduce the issue browser cache need to be cleared each time. tried with img.onload = function() {} and img.crossOrigin
= "Anonymous", still i am able to reproduce the issue for the fresh page load

Hello Arun Sathyan,
Please check if the Internet Explorer can normally load the image when you use it in compatible mode.
http://windows.microsoft.com/en-HK/internet-explorer/use-compatibility-view#ie=ie-11
If this issue is related to Internet Explorer web development, to receive better support, it is recommended to post in the MSDN Internet Explorer Development forum.
The professionals there will be glad to help you.
https://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Webpages are not loading/downloading content properly.

Almost all webpages I am visiting are not loading properly. The font appears very large, the images do not download, and there is no flash/animation.
I have tried closing and reopening Firefox, and I already have the updated version installed. I did not see any available options in "View" to change the look of the pages. The pages this problem are most noticeable on are: www.msn.com, www.wellsfargo.com, and www.kob.com.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
See also:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Safari 8 extensions are not saved

Hi,
on Yosemite with Safari 8 installed, extensions are not saved.
When installing extensions they work. However, when I restart safari the are gone. They are still in ~/Library/Safari/Extensions but not activated and not shown in the extensions tab in the settings.
Any ideas who to solve this issue?
Thanks

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.apple.AirPortBaseStationAgent com.apple.installer.osmessagetracing' '464843899 1233118628' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i];if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

My pages are not loading correctly---get index-like pages.

Web pages like NASCAR.COM, The Daily Beast are not loading correctly. All I get are lists of links.
''moderator edited the title of this thread''

''get index-like pages for NASCAR.COM, The Daily Beast''
For nascar.com if I turn off page styling it kind of looks like indexes.
From the View menu (Alt+V) see if what you have for Page Style -- if you have a theme try Basic Style to see if it fixes, and try "No style" to see if it looks the same as you currently see.
Besides themes, styles, and GreaseMonkey scripts you might have an extension such as Adblock Plus blocking some styles.

Developement Mode extensions are not loaded by Photoshop CC after 14.2 update

Similar Messages

Maybe you are looking for