Developer 1.6, 2.1 and 6i on the same machine does not work

I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
Is trying to find it in the path of the Developer 2.1 and of course it does not work.
The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
It is possible some workaround even if running one version at a time.
Thanks.

Similar Messages

Leon and I installed the Time Machine does not work. to the Airport Extreme is connected MyBookWorld II. Snow leopard with everything working. Leon sees the drive, but you can not connect to it. can not be seen in disk utility. Thank you for your help or

Leon a Já instalované Time Machine nefunguje. na Letiště Extrémní je připojen MyBookWorld II. Sníh leopard s vše pracovat. Leon vidí pohonu, ale nemůžete se k němu připojit. nemůže být viděn v disk utility.
Děkuji za Vaši pomoc nebo rady
Petr

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Last night I bought Adobe XI Pro and this morning the serial number does not work.

Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

Hi All,
It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
Is there any way around this if i want to use the 2 at the same time?
How does this work with SharePoint 2013 as i would be doing some migrations?
Cheers in Advance

Hi,
As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
After you choose one of them, you can open the site.
https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
So I think there are some other reasons to cause the issue.
Check these things below:
1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
Settings > SharePoint Designer > ensure Enable SharePoint Designer
is selected).
3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
More references:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
Best regards
Sara Fan
TechNet Community Support

MouseEvents and KeyEvents in the same form is not working

Hello!
I'm newbee in java althought i've bee programing for a long time in other languages, C, C++ wich i'm proud of.
Now i land on java and there are a lot of cuestions (nothing that cant be solved by trying and reading).
But today i hitted my head against all posible solutions and nothing (but bad mood) came out.
The code with trouble is this...
public class NewJFrame extends javax.swing.JFrame
    public NewJFrame()
        initComponents();
    private void initComponents() {
        jButton1 = new javax.swing.JButton();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        addKeyListener(new java.awt.event.KeyAdapter() {
            public void keyPressed(java.awt.event.KeyEvent evt) {
                formKeyPressed(evt);
            public void keyReleased(java.awt.event.KeyEvent evt) {
                formKeyReleased(evt);
            public void keyTyped(java.awt.event.KeyEvent evt) {
                formKeyTyped(evt);
        jButton1.setText("jButton1");
        jButton1.addMouseListener(new java.awt.event.MouseAdapter() {
            public void mouseClicked(java.awt.event.MouseEvent evt) {
                jButton1MouseClicked(evt);
        pack();
    private void formKeyTyped(java.awt.event.KeyEvent evt) {
        Integer i = evt.getKeyCode();
    private void formKeyPressed(java.awt.event.KeyEvent evt) {
        Integer i = evt.getKeyCode();
    private void formKeyReleased(java.awt.event.KeyEvent evt) {
        Integer i = evt.getKeyCode();
    private void jButton1MouseClicked(java.awt.event.MouseEvent evt) {
        Integer i = evt.getButton();
    private javax.swing.JButton jButton1;
}In debug mode i cant listen to mouse events and key events in the same form. Is that normal ?
In case this is normal, how can i surround this "problem" and make it work.
Thanks a lot in ahead.

Thanks for trying to understand whats going on ...
There is my SSCCE
* NewJFrame.java
* Created on 2 de mayo de 2008, 20:32
* @author edu
public class NewJFrame extends javax.swing.JFrame
    public NewJFrame()
        initComponents();
        setFocusable(true);
        requestFocus();
    private void initComponents() {
        jButton1 = new javax.swing.JButton();
        setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
        addKeyListener(new java.awt.event.KeyAdapter() {
            public void keyPressed(java.awt.event.KeyEvent evt) {
                formKeyPressed(evt);
            public void keyReleased(java.awt.event.KeyEvent evt) {
                formKeyReleased(evt);
            public void keyTyped(java.awt.event.KeyEvent evt) {
                formKeyTyped(evt);
        jButton1.setText("jButton1");
        jButton1.addMouseListener(new java.awt.event.MouseAdapter() {
            public void mouseClicked(java.awt.event.MouseEvent evt) {
                jButton1MouseClicked(evt);
        javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane());
        getContentPane().setLayout(layout);
        layout.setHorizontalGroup(
            layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
            .addGap(0, 400, Short.MAX_VALUE)
            .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addGap(0, 0, Short.MAX_VALUE)
                    .addComponent(jButton1)
                    .addGap(0, 0, Short.MAX_VALUE)))
        layout.setVerticalGroup(
            layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
            .addGap(0, 300, Short.MAX_VALUE)
            .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING)
                .addGroup(layout.createSequentialGroup()
                    .addGap(0, 0, Short.MAX_VALUE)
                    .addComponent(jButton1)
                    .addGap(0, 0, Short.MAX_VALUE)))
        pack();
    private void formKeyTyped(java.awt.event.KeyEvent evt) {
        setTitle(String.valueOf(evt.getKeyCode()));
    private void formKeyPressed(java.awt.event.KeyEvent evt) {
        setTitle(String.valueOf(evt.getKeyCode()));
    private void formKeyReleased(java.awt.event.KeyEvent evt) {
        setTitle(String.valueOf(evt.getKeyCode()));
    private void jButton1MouseClicked(java.awt.event.MouseEvent evt) {
        setTitle(String.valueOf(evt.getButton()));
    private javax.swing.JButton jButton1;
    public static void main(String args[]) {
        java.awt.EventQueue.invokeLater(new Runnable() {
            public void run() {
                new NewJFrame().setVisible(true);
}It's quite simple, its suposed to show on the windows title the KeyCode (if there is any) or the MouseButton when pressed.
The problem is: it doesnt work... (if i comment out the jButton1 related code, that means that i dont listen to MouseEvents & dont add the MouseAdapter as MouseListner to the form, the KeyEvents are raised and i can listen to them - but there are no MouseEvents - if i run the SSCCE like above i can listen to the MouseEvents, but cant listen to the KeyEvents. Can you tell me why?
Just before posting i realized it was a focus issue ! The button got the focus and got all the events redirected towards him ! I solved it with the code
        jButton1.setFocusable(false);and it finally worked !
Thanks!

HT201436 voice mail management is really bad with the newer version of software for my iPhone5 my old version deleted VMs instantly but now my phone freezes up and at times the delete button does not work until i set the phone aside for up to a minute.

I am having a hard time deleting unwanted voice messages with my new phone and software as compare to my iphone4 which was as easy as clicking on the delete button. VMs would delete instantly. with my iPhone 5 7.0.4 software ver the first one or two delete immediately then the phone freezes up for several seconds making the process frustrating. I am wondering if either I am doing something wrong or if there is a fix out there. its a giant step backwards for Apple.

I am having a hard time deleting unwanted voice messages with my new phone and software as compare to my iphone4 which was as easy as clicking on the delete button. VMs would delete instantly. with my iPhone 5 7.0.4 software ver the first one or two delete immediately then the phone freezes up for several seconds making the process frustrating. I am wondering if either I am doing something wrong or if there is a fix out there. its a giant step backwards for Apple.

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Designer 6i and 10g on the same machine?

I have Designer 6i and corresponding repository on my machine.
The problem with 6i I can't save diagramm in HTML format
I believe I can save in HTML format in 10g or other?
Can I install on the same machine 10g designer?
should I configure new repository?
TIA

See my update on your earlier question.
As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back

I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right. The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up. I don't know how else to search for apps, and I don't know how to download this as it was pre installed.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off".

In outlook 2013 Add-In, Adding dynamic menu to splitButton idMso="DialMenu" is working and the same code is not working in outlook 2010 Add-In.

In outlook 2013 Add-In, Adding dynamic menu to <splitButton idMso="DialMenu"> is working and the same code is not working in outlook
2010 Add-In. please let me know, if i am missing something. Below is the xml and screen shot
<contextMenu idMso="ContextMenuFlaggedContactItem">
<splitButton idMso="DialMenu">
<menu>
<dynamicMenu id="CallContactwithFreedomvoice
" label="CallContactwithFreedomvoice"
getContent="OnGetContenttest" insertAfterMso="Call"/>
</menu> </splitButton> </contextMenu>

Hi Narasimha prasad2,
Based on the description, the context menu for the flagged contact doen't work in Outlook. I am tring to rerpoduce this issue however failed.
I suggest that you check the state of the add-in first to see wether the add-in was loaded successfully.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

I have a macbook air and I can't cut and paste in itunes. The right clic does not work. How can I work this out?

Great tip Stephen!!
I was so frustated from this issue that I used to use Windows iTunes for mass editing info, adding Lyrics etc and then transfering songs to Mac. This tip has alleviated my pain!!
Thanks for the tip. This question should be tagged as answered.

Developer 1.6, 2.1 and 6i on the same machine does not work

Similar Messages

Maybe you are looking for