Developer 10g 9.0.4.2 for Linux -- why does web report run so slow?

Hello, I have a particular report that runs for 10 minutes, getting to formatting page 45 of 50, and then just stops when running from the web with RUN_REPORT_OBJECT, destype=file desformat=pdf. However when I run it from the builder or with rwrun.sh it takes like 40 seconds. Is there anything I can do to stop it from hanging or speed it up other than try to improve the report queries? engLife and maxIdle are at 60 and 40, respectively.
Thanks.

whether i can run 6i reports in the 10g developer suiteYes. But be careful you can not go the other way back.

Similar Messages

  • Oracle 10g Release 2 (10.2) for Linux x86-64

    Hi All,
    During installation - Oracle Database Configuration Assistance, I have got below error and thus I stuck. As per Metalink note 293988.1, this will be resolved if I do [root@localhos]# echo 1 > /proc/sys/vm/disable_cap_mlock . But problem is when I do this because I dont have /proc/sys/vm/disable_cap_mlock file in my system, it giving ¨bash: /proc/sys/vm/disable_cap_mlock: No such file or directory¨ error. So I am unable to get rid of this error. I also set SELinux Default and Current mode as permissible and rebooted it.
    No use, Its giving same error.
    ORA-27125: Unable to create shared memory segment.
    DB Details_
    Oracle 10g Release 2 (10.2) for Linux x86-64
    Choosen Basic Installation
    OS Details:_
    *[root@localhost vm]# uname -rm*
    2.6.32-100.0.19.el5 x86_64
    *[root@localhost vm]# uname -a*
    Linux localhost.localdomain 2.6.32-100.0.19.el5 #1 SMP Fri Sep 17 17:51:41 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
    *[root@localhost etc]# cat /etc/redhat-release*
    Red Hat Enterprise Linux Server release 5.5 (Tikanga)
    *[root@localhost etc]# make -v*
    GNU Make 3.81
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.
    There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
    PARTICULAR PURPOSE.
    This program built for x86_64-redhat-linux-gnu
    This is bugging me since last two days. Any help would be appreciated.
    Thanks in advance.
    Regards,
    Mahi

    Trust me I verified installtion guide and release notes atleast 20 times. I never had luck witht any thing. I was wondering how come edelivery.oracle.com packages (both Linux 64 bit Linux with upgrade to Unbreakable and Oracle 10g db version) is not workign for me. Finally below trick to the installed file could make my installation work(Ref link http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora2.php) . In this I am setting DISABLE_HUGETLBFS to value 1. My only doubt is, does this have any impact on performance? Can some one relay on such tweeking for prod installtions? Ofcourse I am yet to go for commercial. At present I dont have ULN or metalink authorised access.
    cd $ORACLE_HOME/bin
    mv oracle oracle.bin
    cat >oracle <<"EOF"
    #!/bin/bash
    export DISABLE_HUGETLBFS=1
    exec $ORACLE_HOME/bin/oracle.bin $@
    EOF
    chmod +x oracle
    Edited by: TechMahi.com on Nov 7, 2010 10:15 PM

  • Oracle 10g (10.1.0.2) for Linux x86 missing from download page?

    Hello,
    Why isn't there a download link to Oracle 10g (10.1.0.2) for Linux x86 on the 10g download page?
    And what's the difference between 10.1.0.3 and 10.1.0.2?
    Thanks

    Hi,<br></br>
    <br>The level of one release is different with plateform.
    On the Oracle Database 10g Downloads you can find only final release, and not intermediare patch.</br><br>For example, the 10gR1 for Linux x86 is 10.1.0.3, and for Windows 32-bits this is 10.1.0.2, after what you can upgrade to the last patchset.
    </br>
    <br>Nicolas.</br>

  • Installed Safari update 6.1.1 for Lion today. Browser now running very slow and keep getting the "spinning pizza".

    I installed the Safari update 6.1.1 today for Lion. Now my browser running very slow, keeps locking up & getting the "spinning wheel". It stops spinning eventually, but recurs constantly when I try to navigate elsewhere, including within this site. Screen also jumpy/almost flickering. No other browsers installed on machine, only extension used is AdBlock. Tried to search for others with this issue, but not finding it posted and machine locking up is making it difficult. Any help much appreciated!

    Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Just check the box beside “Remove all website data”.
    Click "Reset".
    Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
    Turn off Extension, and launch Safari.
    Safari > Preferences > Extensions

  • Why does the fan run for long periods on macbook pro

    why does the fan run for long periods on macbook pro?

    to keep the internal components of you mac at a safe operating temperature.

  • Why does iCloud email run so slowly in Firefox? Typing is frequently stopped and "non-responsive" shows up and everything freezes for a while

    Why does iCloud email run so slowly in Firefox? Typing is frequently stopped and "non-responsive" shows up and everything freezes for a while. Doesn't happen with Outlook or Google?

    Hi,
    You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. If it is okay, you can then install the Mozilla Archive Format add-on.
    If you have security software installed you can try to delete all existing entries for Firefox and its sub processes in the different configuration modules and try to fully trust/allow Firefox afresh. Even after network access is completed, Firefox would still need unlimited access to its disk cache/memory as well as its files. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewall Configuration]

  • Oracle 10g or less Pro Fortran for linux  ?

    Hello,
    I'm looking for the oracle pro-fortran for linux.
    Where can i find it ?
    Thanks

    Doesn't appear to be part of the Linux bundle. It may not have been ported. I checked 10gR1 and 9.2.x.

  • SDK Code for bulk opening of Webi reports and Save

    Hi,
    Is it possible to bulk open webi reports using SDK and save it again.
    Thanks,
    Chandra

    Hi Chandra,
    No, This script is for only opening the webi document & saves it back to enterprise without any processing.
    If your webi document have the refresh on open & last prompt value selected properties checked then you don't have to modify the code.
    If you want to handle the prompt as well, then you have to modify the code & write the application flow like below:-
    1. Logon to enterprise.
    2. get infostore service.
    3. get all the webi documents into infoobjects collection
    4. get engines services.
    5. load document instance.
    6. clear the prompt values & set it with new value.
    7. saves the report back to enterprise.
    The 6th point is mossing from the script. You can add that piece of code in the attached script also you can take help from the sample codes & Developer guide & API references.
    Thanks,
    Shailendra

  • Use Mobile Data For: Settings - Why does Settings need a cellular data connection?

    iPhone 5 iOS 8.1
    Settings > Mobile > Use Mobile Data For: Settings
    Just curious, why does the iPhone need this turned on? Why does the settings app need a cellular mobile data connection?
    If you turn it off, you're pestered to turn it on every time you go into settings?

    Because, that's the way Siri works...it needs an Internet connection...requests are sent to Apple's servers. No Internet, no Siri.

  • #multivalue error for detail object in webi report

    Hi,
    I am facing #multivalue error in my webi report.
    I am using 2 queries 
    Query 1
    Account Number
    Cost Center
    Query 2
    Account Number
    Order Number
    Now I want to display Account Namer,Cost Center and Order Number in the report.
    So I merged Account Number from both the queries, and created a detailed object "Order" and associated it with [Query 1].[Account number].
    But Order displays values for some accounts, and displays Nulls and #MULTIVALUE error for some accounts.
    Please through some light on this issue.
    I tried every possible solution from my side, but couldn't get it work. It is happening because there is a 1:N relationship between Account Number and Order. I can not use any aggregate function because it will give only the Max or Min value, but I want list all the value of for each Account Number. Avoid Duplicate Row Aggregation was also checked but it didnot help.
    Thanks.

    Hi Shreya,
    There are few things that you need to consider while displaying the data.
    1 - Can an Account Number be associated to more than one Order Number?  If yes, then your solution will not work and that's the reason you are seeing #MULTIVALUE (i.e. Multiple Order Numbers for the same account number)
    2 - Why would you want to create two data providers?  Would it not be possible for you to bring in all the 3 objects in the same data provider?  The only reason I could think of is that they are not related
    3 - Always make the lower granularity objects common across the data providers.  I do not know about the relation between different entities of your database, but I would suggest something like
    Query 1 - Order Number, Account Number
    Query 2 - Order Number, Cost Center
    and merge Order Number...and create detailed object for either Account Number / Cost Center.  It all depends on the relation between the tables.
    Hope the above pointers help you.
    Regards,
    Srivatsa

  • How to deactivate the context menu for data cells in web reports

    Hello,
    we would like to have the data cells (for example: values in euro) without context menu. I mean, right now, when users navigate in web reports and stop with a mouse over the data cell, text like "Context menu for 5.000 Highlighted" appears. Especially users don't want to see the exception cells with this information like
    "Context menu for 6.000 critical 4".
    Is it possible to deactivate this context info?
    Thanks and Regards,
    Nuran Adal
    Message was edited by: Nuran Adal

    Hello Nuran,
    I guess you want to disable the Tooltip and not the ContextMenu. Anyway, use the table interface for it.
    Have a look at paramter C_CELL_CONTENT
    In Method DATA_CELL.
    This one contains strings like:
    30,0
    Rebuild this String to:
    30,0
    Kind Regards,
    Alican

  • For Experts: Why does LabView cause System reboot while accessing hardware with driver?

    Hello NI Developers!
    I use LabView 7.1 under Windows XP
    I have a programm console application which accesses through Jungo Windriver PCI-E board.
    This program works fine - and performs DMA data transfer between PC and Board's memory.
    In order to implement this console application work together with LabView I did following:
    1) Added this function inside the source:
     _declspec(dllexport) void LVMainFunction(uInt32 *IntValue);
    _declspec(dllexport) void LVMainFunction(uInt32 *IntValue)
        AllocConsole();                   //Open new console window
        SetConsoleTitle(L"Debug Window"); //Set a title for console window
        freopen("CONOUT$","a+",stdout); //redirec standard output stream to current window so
                                        // so we are able to see "printf" outputs
       freopen("CONIN$","a+",stdin);    //redirec standard input stream to current window so
                                        // so we are able pass inputs from keyboard
       main();                          //Call applications main function which does all the work
    2) Compiled this new source as DLL library
    3) Call  LVMainFunction(...) function from LabView using Call Library Node
    In the result: Executing VI - opens new console window, shows debug outputs and receives keyboard inputs.
    It works fine till the last function, which perform DMA data transfer - and reboots PC.
    1) Why does this happen?
    2) I understand that opening console from Call Library Node, attaches together this console window and running VI. So If I close one of them - both windows closes.
         So does LabView have somekind of restrictions of accessing Hardware's functions? 
    I can read Board's resource information and view size of memory on board, interrupt functions and other information about device, but when I try to reach
    DMA my system reboots. And I understand that this should be some kind of LabView problem, cause I tried different implementations, even without use of
    console window - and the result is the same.
    3) Should I split the program in to two separate processes and perform data exchange using Sockets or Pipes techology?
    Thank you in advance!
    ACiDUser
    Message Edited by ACiDuser on 11-13-2008 09:37 AM

    Hello!
    At LAST!!!
    I solved this problem!
    From the beginning I was following National Instruments manual on how to build DLL with external IDE:
      http://zone.ni.com/reference/en-XX/help/371361A-01​/lvhowto/building_library_project/
    Set the Struct member alignment control to 1 Byte.
    Now this option caused my PC to reboot!
    So could someone explain  why this happened? and If it is a bad tip, so it's better to remove from manual. Then other people will not have such problems as I did
    - wasting 2 monthes of time determining the problem. 
    I changed it to  Set the Struct member alignment control to DEFAULT.
    and now everything works fine.
    Regards
    Message Edited by ACiDuser on 11-13-2008 11:14 AM

  • Search for display attributes in Web reporting

    Hello,
    When I execute a query in Excel, in the variable entry screen, I can search values for material, for example, using some display attributes as Colour or Size. I mean, I want to execute the report for materials whose colour is white. I can open the matchcode for Material, I select the value "white" for the Colour display attribute, and I get a list of all the materials with that colour. The report is executed for those materials.
    However, when I execute the same report using Web reporting, I don't have the display attributes in the selection screen, to restrict the material. Once the report is executed, in the Navigational block, if I filter the material, there is an option called "Search for display attributes activated", where I can restrict per Colour, but only for one value.
    I have two questions related to this topic:
    1) Is it possible to have the functionality "Search for display attributes activated" in the variable entry screen, for Web reports, in the same way it is available in the reporting via Excel?
    2) Is it possible to configure that functionality, in order to restrict several values for the display attribute at the same time (in my example, for Colours "white", "black" and "red" at the same time)?
    Thanks very much for your help
    Patricia

    Hi Patricia,
    Looks like you have some new navigational attribute requirements, don't you think? I'm sure that would solve your issue, though maybe you're trying to avoid using navigational attributes (it is usually said that using navigational attributes is slower).
    Maybe you can do a test on BEx to check if your query is considerably slower when filtering directly by material code (by filtering on the selection screen using display attributes) or using a navigational attribute.
    Match codes on web reporting have lost some functionalities compared to BEx (such as importing a list of values from a file, for instance).
    Regards,
    David.

  • Just installed snow leopard and office for mac - now my computer is running very slow.  Why?

    I've recently installed snow leopard and office for mac - now my computer is running very slowly - why?

    Which version of office did you install? If its 2008 the early version had some problems and you will want to update the office software to i think it is 12.3.0
    If it is 2011 you might want to do the same thing.

  • Preinstallation Tasks: 10g Release 2 (10.2) for Linux x86

    In the section:
    Setting Shell Limits for the oracle User
    of http://download.oracle.com/docs/cd/B19306_01/install.102/b15660/pre_install.htm#BABCHAED
    It says the following:
    Add or edit the following line in the /etc/pam.d/login file, if it does not already exist:
    session required /lib/security/pam_limits.so
    session required pam_limits.so
    Here is my /etc/pam.d/login file content:
    #%PAM-1.0
    auth required pam_securetty.so
    auth required pam_stack.so service=system-auth
    auth required pam_nologin.so
    account required pam_stack.so service=system-auth
    password required pam_stack.so service=system-auth
    # pam_selinux.so close should be the first session rule
    session required pam_selinux.so close
    session required pam_stack.so service=system-auth
    session required pam_loginuid.so
    session optional pam_console.so
    # pam_selinux.so open should be the last session rule
    session required pam_selinux.so open
    Question:
    do i add this at the end of the file?
    session required /lib/security/pam_limits.so
    session required pam_limits.so
    Or change a line in my file? If yes, which line do i change?
    Message was edited by:
    Steeve

    If this line already exists, just edit it and change the value accordingly. If this line doesn't exist just add it. it doesn't matter where in the file it is located.
    Personally I do it by script, I have to do it pretty frequently so it became a routine for me:
    cp /etc/pam.d/login /etc/pam.d/login.bak
    echo -e session    required\\t/lib/security/pam_limits.so >> /etc/pam.d/login~ Madrid.

Maybe you are looking for