Developer 10g Error using IE8

Hi everyone,
I installed Oracle 10g Developer Suite [32 Bit] Version 9.0.4.0.19 (Production), using IE8 and Database using 10g (10.1.0.2) when i try to execute my form the browser (IE8) gets launched and throws and error and close right away.
Can anyone help?
Syed Salman Haider
[email protected]
Pakistan, Multan
+92 300 863 5848

hi
please try something like this.
1. Open Internet Explorer 8
2. Go to Tools, Internet Options
3. Click on the Advanced tab.
4. Scroll down into the Security section and find “Enable memory protection to help mitigate online attacks”.
5. Uncheck “Enable memory protection to help mitigate online attacks”.
6. Click Ok and Ok again.
7. Reboot your computer.If possible please post u r error over here.
sarah

Similar Messages

Developer 10g error Java.Lang class not found

Hi
My application is live on static IP but when i try to access it from some systems i get the error after downloading Jinitiator
Java.lang class not found exception:Oracle forms engine main
is this problem of browser or something else? how can i solve
Regards

Hi
My application is live on static IP but when i try
to access it from some systems i get the error after
downloading Jinitiator
ava.lang class not found exception:Oracle forms
engine main
is this problem of browser or something else? how can
i solve
RegardsSee the JInitiator "Proxies" configuration tab from the control panel, try checking the "Use Browser Settings" checkbox, that does the trick sometimes.
Tony

Error while installing developer 10g on linux suse 10.0

Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.png

Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

Webutil call from Developer 10g - 06508 error

I'm trying to call webutil using the OC4J instance installed with Developer 10g. It appears as though webutil is already configured to work with the OC4J instance, but when I attempt to call it, I get the ORA-06508 error message. When installing Developer 10g 10.1.2.02, is webutil correctly configured? and do you just need to add the webutil.pll and subclass the webutil.obj in order to call a window's open file dialog?

Although Webutil is installed by default with Forms 10g, it is not completely configured and will not work "Out of the Box". You must configure your installation for it to work propertly. I recommend you visit the Oracle Forms Webutil - Production Release web site and print the WebUtil Doc offered in HTML or PDF format. It only takes about 15 minutes to configure the Developer Suite to use Webutil, but you have to complete each task listed in the Configuring WebUtil section of the document - don't take any short-cuts!
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Had firefox on my computer but was using IE8 as browser. uninstalled mozilla as keep getting error message when trying to share Times article to fb which mentions mozilla but it is still happening

I only use IE8 as my browser but had mozilla firefox installed on computer too. For about a month now have been unable to share NY Times articles to facebook. When I click on "recommend to facebook" I get an error message in the status bar that mentions mozilla. I uninstalled mozilla firefox but this is still happening. I contacted The NY Times but they are unable to replicate the problem and suggested contacting mozilla.

I only use IE8 as my browser but had mozilla firefox installed on computer too. For about a month now have been unable to share NY Times articles to facebook. When I click on "recommend to facebook" I get an error message in the status bar that mentions mozilla. I uninstalled mozilla firefox but this is still happening. I contacted The NY Times but they are unable to replicate the problem and suggested contacting mozilla.

How to use Oracle Help in developer 10g

Hi!
First i'm sorry for my bad english
I'm a student in computer science and i have a projet to make with Developer 10g. My teacher want us to make a Help file for the user but he don't know how to do it with developer 10g.
So i've made some research on internet and i found how to create my help file. I have downloaded Oracle Help and RoboHelp.
Using RoboHelp i've create my help file and then i generate it in Oracle Help format. I generate it in a compressed and a uncompressed version(because didn't know which one i need). So now i have two folder one who containt a .jar file and another who containt a lot of files.
What i want to know is how to execute my Oracle Help in a WHEN-BUTTON-PRESSED trigger with theses files.
Thank and sorry for my bad english

Hi Pierre,
Showing an appropriate help topic when a "Help" button is pressed in an application or when the user presses the F1 key is what we call "context-sensitive help".
In your Oracle Help help system there is an XML map file that contains topic-ids that map to help topics. You need to associate these topic-ids with your user interface (help button, etc).
Is your project an extension to JDeveloper 10g, or are you just creating a Java application using JDeveloper? If you are just using JDeveloper to create your own Java application, then you can use the CSHManager class distributed with Oracle Help for Java to enable context-sensitive help (see the Oracle Help Guide documentation). If you are creating an extension to JDeveloper, then let me know and I'll give you information on how to set up help in that context.

Using hierarchical tree in developer 10g

Hi all
how can we use hierarchical tree in developer 10g any white paper will be helpfull
thanks

Hello
<p>Here is a first sample<br>You could probably find others on this forum or by Googling<p>
Francois

Internal HTTPS data no longer accessible using Firefox 7. "Corrupted Data" error. OK using IE8.

We access our spam filter program using an internal HTTPS URL on port 8080. (https:/xxxxxSBS:8080) We can get to the Spam Filter login page, but when I try to login I get an error:
Corrupted Content Error
-The page you are trying to view cannot be shown because an error in the data transmission was detected.
-The page you are trying to view cannot be shown because an error in the data transmission was detected.
-Please contact the website owners to inform them of this problem.
It worked fine using Firefox 5, and works fine using IE8.

This preview window - is it the one in Acrobat 10.1.4 when you choose to print a PDF (or a PDF made from an HTML)? If it's a preview in a browser, this seems like maybe a Mac OS problem; Acrobat doesn't make that preview.

How To Use F4 Command in Oracle Developer 10g to close Form on Web

Hi,
How can we close a running form and come on main menu screen in Oracle Developer 10g, when we are working on Web.
This can we do easily in Oracle Developer 6i but it will work for desktop based application.
Thanks

Hi Vansul,
Thanks for your reply.
can you please tell me in which file i need to make changes.
where is that file located, i didn't see any folder with the name of configuraton.
How can i add entry for F4 in file.
Thanks

How to Run a Report from Desktop in Oracle 10g without using Web

Hi Friends,
I want to run a report from desktop (report which is developed in oracle report developer 10g), for that i have created shortcut. But when i double click on that shortcut it gives me followig error
"Report name, database connection, and reports server name (unless using local runtime, i.e. reports server call is local) properties must be specified for successful report run"
the path which is defined in the shortcut of report is as follow
D:\DevSuiteHome_1\BIN\rwsxu.exe rcptreg_dt userid/password@ORC
pls help me to sort out the problem.
Thanks & Regards.

Hello,
You can use rwrun. Since 9.0.2 , it is no more possible to DISPLAY the output on the screen , but you can generate a file (HTML , PDF , RTF , ..) and then open the file generated.
EX: rwrun report=c:\temp\myrep.rdf destype=file desname=c:\temp\myrep.pdf desformat=pdf userid=scott/tiger@mydb P_1=param1_value ...
Regards

Unable to run forms in oracle forms developer 10g

I am using oracle forms developer 10g on oracle application Release 12.
When i run form i am getting error that weblistener is not running on default port 8888. Then i changed it to 8000. But still i am not able to run the forms.

Nivas,
In addition to running OC4J, you must also have your browser configured to use a Java Runtime Environment. The easiest - and preferred - method is to install the Oracle JInitiator as there is not configuration needed other than the installation. You can also use Sun's JRE, but you would have to research how to configure your PC correctly. The other option is to change your FormsWeb.cfg file to use the Browser Native JRE. Edit the formsweb.cfg file and find the IE= directive. The Default is IE=jinitiator. Change this to IE=Native, save your changes and you are done. This is not the preferred solution, but it does work.
Craig...

PreparedStatement error using VPD

Hi all,
Our team is developing an application using an Oracle DB 9.2.0.4 and BC4J 10g (9.0.5.16.0) as persistence layer.
We also are using the VPD (virtual private database) to have security in the database at row level.
The problem we are facing is that every some time (days) we get a jdbc error when a query (see below) that uses VPD policies is executed. Once the error occurs I execute it from sqlplus without getting any error .. it only occurs from our java application.
To temporary solve this problem, we delete and recreate the VPD policies, then the application continue working fine for some time ...
I'll appreciate any comment / suggestions
Thank in advance.
Eduardo.
ERROR LOG:
oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT CalLocation.ID,
CalLocation.CODE, eo
CalLocation.NAME,
CalLocation.ZIP,
CalLocation.PHONE,
CalLocation.FAX,
CalLocation.ADDRESS1,
CalLocation.ADDRESS2,
CalLocation.URL,
CalLocation.OWNER,
CalLocation.CTY_ID,
CalLocation.DESCRIPTION,
ORefCity.CODE CTY_CODE,
ORefCountry.ID CTR_ID,
ORefCountry.CODE CTR_CODE,
ORefRegion.ID REG_ID,
ORefRegion.CODE REG_CODE
FROM CAL_LOCATIONS CalLocation,
OREF_CITIES ORefCity,
OREF_COUNTRIES ORefCountry,
OREF_REGIONS ORefRegion
WHERE ORefCity.ID = CalLocation.CTY_ID
and ORefCountry.ID = ORefCity.CTR_ID
and ORefRegion.ID = ORefCountry.REG_ID) QRSLT WHERE ( ( (CTY_ID = 867) ) )
## Detail 0 ##
java.sql.SQLException: Io exception: Broken pipe
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:345)
     at oracle.jdbc.driver.OracleStatement.open(OracleStatement.java:717)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2605)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)

It seems to be related to the bug 3662364 .
Regards,
Eduardo.

Developer Installation Error

Asalam-o-Alekum Brothers
Dear Brothers
I want to Install Developer 10g 10.1.2.0 on Windows 7 (32bit) but when after selecting the one option (COMPLETE) Its shows error as per following
"The window System Files install has not been run on this machine. One or more operating system file currentlt in use need to be updated. you must exit this installation and use disk 1 to run a secondary windows system files installation to update the operating system files and then restart the current installation process"
Forms6i, Report6i already running in the same machine and work perfectly.
Can any one help me in this regard

Generally speaking, installing Forms versions older than 11 onto Win7 is not recommended although it can be done. Even though Oracle Support doesn't particularly recommend performing such an installation, they did auther a document which instructs you on how to properly perform the installation on Win7 with success. Refer to the following MyOracleSupport note:
<blockquote>How to Install Developer Suite 10.1.2.3 on Windows Vista or Windows 7 (32bit) (Doc ID 559067.1)</blockquote>
If you do not have access to support.oracle.com, you will need to search this forum as this discussion has been repeated many times in the past.
Also, the "Windows Support Files" are often obtained when completely updating your installation. In other words, installing all of the Windows updates. However, if you believe you have already done this but still have the issue, there is a wsf.exe file included with the Forms/Reports 10 distribution. Run this file "as Administrator" to install what is needed.

10g error on initjvm.sql during manual db creation

Hi all,
I get an error after my (manual) database ceation when I want to install a jvm (on Suse linux 10g), I hope you can help.
I've done several 'clean' installations by hand and several 'full' installations using the dbca. But I want to have a 'clean' install from my own scripts (including a RON & use of inside java later), but this effort fails (after a neat installation) when I want to install the jvm using the initjvm.sql script.
After my default database creation, I want to install the JVM, by starting:
cd /u01/app/oracle/product/10.1.0/db_1/javavm/install
sqlplus sys/[passwd] as sysdba @initjvm.sql 2>&1 | tee ~/setup_inst01/spool/initjvm.lst
cd -At the end (or at least at the end of this run) I get the following error:
begin if :jvmrmaction = 'NONE' then
ERROR at line 1:
ORA-29558: JAccelerator (NCOMP) not installed. Refer to Install Guide for
instructions.
ORA-06512: at "SYS.DBMS_JAVA", line 236
ORA-06512: at line 2It seemed that this JAccelerator was not really necessary for a JVM to run. So I installed the JVM check funtion (which I've installed before on Metalink's advice):
CREATE OR REPLACE FUNCTION XMLVER RETURN VARCHAR2 IS LANGUAGE JAVA NAME
'oracle.xml.parser.v2.XMLParser.getReleaseVersion() returns java.lang.String';
/Unfortunatelly it returned:
ERROR at line 1:
ORA-29540: class oracle/xml/parser/v2/XMLParser does not existThis gives me a clue the JVM is not installed properly.
I've run the rmjvm.sql script and am searching for a way to install the jvm correctly using scripts (not the dbca).
At this developing stage I'm not really able to contact Metalink, so I'm wondering how to install a JVM on a 10g database using scripts (10.1.0.3.0 on Linux). Anyone got an idea?
Regards,
Michiel

So,
I removed the JVM by running @rmjvm.sql in @ORA_HOME/javavm/install, then installed it again by running @initjvm.sql and ignored the error.
Next was running @initxml.sql in $ORA_HOME/rdbms/admin, but that wasn't really right (so @rmxml.sql in the same dir). After I ran @initxml.sql from @ORA_HOME/xdk/admin, no problems!
Regards,
Michiel

Blank browser when run oracle form developer 10g

Hi, all
I'm newbie on oracle developer.
I'm using oracle form developer 10g, database also 10g and default browser firefox.
I made a form n give EMPLOYEE_MDL for the name.
I got problem when i try to run form, first time shown "*ORACLE FORMS.*" on browser and then the browser getting blank(just white space), the url is:
http://red-erie:8889/forms/frmservlet
Hope you can help me.
Regards n Thanks
eRie

It worked for me in Windows 7 Home premium, both in 32 and 64 bit operating systems...
What I did was,
After successful instalaltion of developer suite, I've installed latest JRE from www.java.com and configured formsweb.cfg and default.env file.
I've used IE8 only. I haven't tested on any other browsers.
Do modify these lines to configure formsweb.cfg to change to JRE from Jinitiator (As said by CraigB )
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
### Original
#jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
### New
jpi_download_page=http://www.oracle.com/technetwork/java/javase/downloads/index.html
# Parameter related to the version of the Java Plugin
### Original
#jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
### New
jpi_classid=clsid:CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
### Original
#jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
### New
jpi_codebase=http://java.sun.com/update/1.6.0/jinstall-6-windows-i586.cab#Version=1,6,0,24
# Parameter related to the version of the Java Plugin
### Original
#jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
### New
jpi_mimetype=application/x-java-applet;jpi-version=1.6.0_24I also recommend you change the following variable as well.
# System parameter: base HTML file for use with JInitiator client
#baseHTMLjinitiator=basejini.htm
baseHTMLjinitiator=basejpi.htmEdited by: Charan on Jul 1, 2011 8:46 AM

Developer 10g Error using IE8

Similar Messages

Maybe you are looking for