Developer 2000 - Server Install - Client Install

I have Developer 2000 and Oracle database 7.2.3 running on the same HP AlphaServer. I'd like to separate the database from the application and move the database to a separate machine. Is that just a case of installing the database elsewhere and configuring SQL*Net, or would I need to reinstall the Developer 2000 software as a client install on the AlphaServer too?

Hi Christian,
Developer 6i and Developer 2000 are quite separate releases of the same
product and therefore must be in separate homes.
The Oracle 8i Client should also be in a separate home to these two.
If you are referring to Designer 6i, then you can install Designer and
Developer into the same Oracle Home (as they work closely together), but
they MUST be the same release, e.g.:
- Designer 6i and Developer 6i
- Developer 2000 and Designer 2000
We strongly recommend you do NOT mix releases in the same home, such as
Designer 6i and Developer 2000, as you will have problems getting both
products to work (they are essentially incompatible).
Regards,
Designer Product Management

Similar Messages

Developer/2000 Server on Linux

Does anybody know when this will be available ?
null

You have to define a virtual directory within $ORACLE_HOME/forms/server/forms.conf, adding a line like this
AliasMatch ^/icons/(..*) "/home/oracle/icons/$1"
where "/home/oracle/icons/" is the physical directory (where are icon files), and "/icons/" the virtual one. Then, in $ORACLE_HOME/forms/java/oracle/forms/registry you add/change these lines in Registry.dat :
default.icons.iconpath=http://<machine>:<port>/icons
default.icons.iconextension=gif
where icons is the virtual directory.
Don't forget to restart opmn.

Accesing the data cubes with developer 2000

Hi,
Currently we have to develop the application for the olap operations only with oracle Developer 2000. Our client is not going to take the Oracle objects or oracle express server. we have to develop the application using the oracle developer 6i or above or How can we access the three dimentional data using the plsql procedure or any other method. Currently we are using the oracle 9i release 2.
Please suggest any other way....
with regards,
j.a.r.k.varma.

I would suggest you either go with Oracle Discoverer or Oracle OLAP/ BI Beans. These tools are optimized for reporting and analysis.

How to deinstall Oracle Developer 2000 6i and again install properly

hi
My HDD is partitioned as C,D,E and F. Oracle 9i is successfully installed in my system in C:\ drive (C:\oracle)and it's running fine. when i was going to install Oracle Developer 2000 6i in F:\ drive it dint show neither any error message nor message like successfully installed but all icons are there. when i was started the forms buider it's showing " ORA-12154: TNS: could not resolve service name" error. how to run forms builder? i have installed in XP. should i deinstall Oracle Developer 2000 6i? if yes, how to deinstall that and how to install it properly?
should i install oracle 9i database before and then oracle developer 2000 6i or vice versa???
will be waiting for your valuable suggestions.......
thanks & regards,
Priyatosh

hi
the tnsnames.ora file is in F:\oracle\Frm61\NET80\ADMIN. i have attached the contents of that file below. i don't know where to change and what to change.
Beq-local.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = beq.world)
(PROTOCOL = BEQ)
(PROGRAM = oracle73)
(ARGV0 = oracle73ORCL)
(ARGS = '(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')
(CONNECT_DATA = (SID = ORCL)
Tcp-loopback.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = 127.0.0.1)
(Port = 1521)
(CONNECT_DATA = (SID = ORCL)
Example1.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = tcp.world)
(PROTOCOL = TCP)
(Host = Production1)
(Port = 1521)
(CONNECT_DATA = (SID = SID1)
Example2.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = spx.world)
(PROTOCOL = SPX)
(Service = Server_lsnr)
(CONNECT_DATA = (SID = ORCL)
Example3.world =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = nmp.world)
(PROTOCOL = NMP)
(Server = FinanceServer1)
(Pipe = ORAPIPE)
(CONNECT_DATA = (SID = ORCL)
please help me out.....
thanks & regards,
Priyatosh

New Install Win 2000 Server ORA-12560 : TNS : Protocol Adapter Error

I am trying to learn Oracle.
I get the following when logging into SQL*Plus.
ORA-12560 : TNS : Protocol Adapter Error
I have just installed New Install Win 2000 Server and then Oracle 8i for Win2k
null

Step 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
These are the first two stepo, whether on the database machine or in a traditional client-server configuration.

Installing 11i on Windows 2000 server

Hi
I am trying to install Oracle Applications 11i on Windows 2000
server. I had 40GB space. My system is hanging after i
inserted 'Tools - Disc 1' CD. Then i reformated system and tryed
with stage installation. but when i am copying 'Tools - Disc 1'
CD i got the following message.
" Error performing inpage operation "
Due to of this i am unable to proceed. Could some one tell me is
this installation problem, if so how can i solve this or CD
packing problem. This is urgent.
Thanks in advance
Sarat

Check "Note: 215868.1 - 11i Release Notes" for more details about Windows OS requirements
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=215868.1
11.5.10.2 installation update notes is available through Note: 316806.1 - Oracle Applications Installation Update Notes, Release 11i (11.5.10.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316806.1
Also make sure you install Install XML Parser since on Windows platforms, Rapid Install requires Microsoft XML Parser 3.0 Service Pack 4 (or later) in order to set up and start services.
1) Open the Windows Explorer
2) Navigate to the system root directory (default is C:\winnt\system32).
3) Right-click msxm13.dll. Select Properties. them click Version.
4) If XML Parser is not already installed, or if the version on your system is not 3.0 SP4 (or later), go to the following URL and download the Microsoft XML Parser 3.0 SP4 Software Development Kit:
http://www.microsoft.com/downloads/details.aspx?FamilyID=b432cd45-b7ed-4c32-a443-ec56f10ee175&displaylang=en
5) After installing MSXML 3.0 SP4 SDK, copy msxm12.lib from <Microsoft XML Parser SDK>\lib to <Visual C++/C>\lib, where <Microsoft XML Parser SDK> is the installed location of the MSXML 3.0 SP4 SDK, and <Visual C++/C> is the installed location of Visual C++/C 6.0.
For pre-req software, make sure NOT to install it in a directory that contains spaces and NOT under APPL_TOP

Can I install Oracle 8.1.5 on Windows 2000 server or Windows 2000 professional

Hi,
Can I install Oracle 8.1.5 on a Windows 2000 server or Windows 2000 professional server?
Regards,
Zurvaan

Yes, of course. Both versions works but you have to be prepared for lots of RAM.

Error while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server

Hi.. I'm getting error messages in the Database Instance phase, while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server. Following are message snippets with last few lines showing error message:
SAPSSEXC.log
[code](DB) INFO: REPOSRC~0 created
(DB) INFO: REPOTEXT created
DbSl Trace: ORA-4031 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select name,intcol#,segcol#,...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144208
[/code]
SAPAPPL2.log
[code](DB) INFO: SMOT413~0 created
(DB) INFO: SMOT413~R04 created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 31)
(DB) ERROR: DDL statement failed
(CREATE INDEX "SMOT413~R05" ON "SMOT413" ( "MANDT" , "ERSKZ" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select owner#,name,namespace...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144207
[/code]
SAPSLEXC.log
[code]DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: CO2MAP created
(IMP) INFO: import of CO2MAP completed (0 rows)
(DB) INFO: CO2MAP~0 created
(DB) INFO: CO2MAP~IDX created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "CO2MAPINF" ( "SRCID" VARCHAR2(30) DEFAULT ' ' NOT NULL , "METHID" VARCHAR2(1) DEFAULT ' ' NOT NULL , "APPLNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGEKEY" VARCHAR2(70) DEFAULT ' ' NOT NULL , "ID" NUMBER(10) DEFAULT 0 NOT NULL , "LANGUAGE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "NAMESPACE" VARCHAR2(30) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPCRM620 STORAGE (INITIAL 16384 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144742
[/code]
SAPSDIC.log
[code](DB) INFO: TNMAP~0 created
(DB) INFO: TODIR created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "TODIR"
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
SAPSDOCU.log
[code](DB) INFO: TLSY3~0 created
(DB) INFO: TLSY5 created
(IMP) INFO: import of TLSY5 completed (3 rows)
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 33)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "TLSY5~0" ON "TLSY5" ( "LANGU", "REL", "OLD_REL", "IMP_DATE" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
I am not sure but I think the problem is with the allocated shared memory size, which right now is:
init.ora
[code]shared_pool_size = 67108864[/code]
init<SID>.ora
[code]shared_pool_size = 90112000
shared_pool_reserved_size = 9011200
[/code]
If this is the cause of the problem then how much should i increase it to? and do i need to modify the size in both files or only init<SID>.ora? Is there any SAP Note related to this problem? Thanks.
Regards,

Hi Vasu,
ORA-4031... for 99% of cases this means one thing:
the database instance is not configured correctly.
To proceed, do the following:
1. get rid of init.ora (it's not used at all)
2. make sure that the init<sid>.ora file is really used.
 If there is a spfile in the %ORACLE_HOME&/database folder
 then this will be used.
3. With your configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
 Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
See note:
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
for more on this.
And when you're setting up parameters anyway, check note
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
KR Lars

9.2.0.1.0 install hang at loading product on windows 2000 server SP4

When I am trying to install Oracle Enterprise server 9.2.0.1.0 on a Windows 2000 server SP4 freshly installed
The OUI hang when loading product @ 91% on the "File Location" screen !
This is not the symcjit.dll prob with P4 computer because I have upgrade the P4 motherboard drivers and I have tried the solution which is to rename this file and it is not working
Any URGENT idea ?
Thx

I have installed 9i successfully on machines with AMD64 cpus and 64bit Xeons without any problems.
Cheers,
R

Install Oracle 8i Personald Edition on Windows 2000 Server SP2

Hi
I have problem to install the Oracle 8i Personal Edition on
Windows 2000 Server SP2.
I run the Setup.exe, I become the message (not exactly) “JRE
(Java Runtime Environment) was not found…… please visit
www.javasoft.com….. and install JRE version 1.1.7 or higher…”
Now, I have download and install this JRE (JavaTM 2 Runtime
Environment v 1.2.2_008 / Internationalized version of Java 2
Runtime Environment).
The error-messages comes again.
Have everyone a idea?

hi phill...
why dont you try it out with the same CD and increase your RAM
by another 64MB? This will be enough. The reason is , most
Oracle 8i releases are combined with a java based Oracle
Universal Installer. This requires some good amount of RAM. Just
try it out with some extra memory. If this also didnt work, then
send in the problem,error with your system config. This will
help me in solving your problem.
Imran.

Problem installing Oracle 8i(8.1.7) standard edition on windows 2000 server

I am trying to install Oracle 8i (8.1.7) standard edition on windows 2000 server but the setup program doesn't run.
It starts up, allocates some ram then closes before a window even pops up.
I also have MSSQL server installed on this computer, does that conflict?
Has anyone encountered this problem before? If so, please give a solution if you have one, thanks,
OPS

Yes. There is a bug with Pent4, Win2000 & Oracle8i.
Here is the workaround:
This is a known bug with Oracle java-based applications and Pentium 4 Use this work-around:
1) Copy the install directory from the CD to the hard disk.
2) Edit oraparam.ini and modify it as follows:
* Edit the "SOURCE=" line to to show the full path to the CD ; SOURCE={CD DRIVE LETTER}:\stage\products.jar)
* Edit the "JRE_LOCATION" line to show the full path to the CD ;
JRE_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles\Expanded)
* Edit the "OUI_LOCATION" line to show the full path to the CD ;
OUI_LOCATION={CD DRIVE
LETTER}:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataFiles\Expanded
* Edit the "JRE_MEMORY_OPTIONS" line to include "-nojit" as the first argument ;
JRE_MEMORY_OPTIONS=-nojit
-ms16m -mx32m
3) Start setup.exe from your hard drive
Choose a Custom install and choose not to create a database during the install.
This way, the Database
Configuration Assistant will not be launched during installation. DONT SELECT
NET8 products for installation.
You need to put the same java parameters for the DB configurator and the Net8
Configurator
to run.
-nojit -ms16m -mx32m before -classpath on:
* assistants\dbca\DBAssist.cl
* network\tools\netca.cl
** Run the DataBaseConfigurationAssistant and NetworkConfigurationAssistant after installation.
Hope it helps!
Amrit

Installing oracle 10g on windows 2000 server

hi masters,
this might look very silly question, and every child might know answer, but i would like to ask this question here that
i have oracle 9i release 2 installed on my windows server 2000 and an application is already running, now i want to install oracle 10g on same machine...
but when i try to launch oracle universal installer, it fails to launch it....whay is this so??? do i need to adjust some parameters to install it????
can anyone provide a checklist to check??i have an antivirus installed on machine...
any suggestion will be appreciable
thanks and regards
VD

got my answer, you can follow this step.
on windows 2000 server while launching oracle universal installer, due to jre bug (noted in metalink 266617.1 doc and 393070.1) installer CMD prompt launch and disapper in a while... so run following command on command prompt
to resolve the issue.. change directory path according to your directory structure.
change directory to your oracle installation setup.exe directory and execute following command
C:\>\backup\SoftwareBackup\Database10g\database\install\oui.exe -J-Dsun.java2d.noddraw=truethanks and regards
VD
Edited by: vikrant dixit on Apr 21, 2009 4:47 AM
Edited by: vikrant dixit on Apr 21, 2009 4:48 AM
Edited by: vikrant dixit on Apr 21, 2009 4:50 AM

No action after click install (8i for window 2000 server)

I tried to install Oracle 8i EE on the PC with Pentium 4 1.6G CPU and 512MB DDR SDRAM,the platform is Windows 2000Server.I started the autorun program and clicked install,but there is no any action afterward.
Is it possible that hareware issue affected the installation? Because I can install Oracle 8i on another PC with Pentium 3 and 512 SDRAM,the platform is also Win 2000 Server.
Does anyone experience such an issue? It is very helpful if you have answer to the problem.Thank you very much.

I'm having exactly the same problem!
Dell Inspiron 8200 notebook - P4 1.6Ghz, 512Mb DDR Ram, GeForce 4 MX 440.. Thought it was a software thing, but even after a totally clean install of win2kpro with no drivers, it won't run..
Trying to install sybase, which uses jre1.2.0 (instead of 1.1.x that oracle installer uses), I get an illegal exception, so it seems to be some sort of hardware incompatibility with older versions of java, but my efforts to change the vers of jre that oracle installer uses haven't managed to work so far..
I've done the same install on 50-60 P3's and Athlon's and never had a single problem :(

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed?

What is the recommended number of clients per Mac server? Also what are some recommended specs when purchasing an Apple machine that will have Mac OS X server installed? We have around 300 clients that need to be enroled on the Mac server. I want to know what is the recommended amount of clients a Mac server should contain. Also what are some recommended specs to make sure the server will flawlessly?

Hello cpreasbeck,
Thank you for contacting Apple Support Communities.
I was able to find the following transition guide for Xserve that provides some workload guidance to determine performance when planning a server deployment.
Transition Guide Xserve
http://images.apple.com/xserve/pdf/L422277A_Xserve_Guide.pdf
On page 9, Performance there is a chart that provides maximum numbers of connected users for various activities such as file sharing, mail, web, calendar, directory services and Time Machine and the CPU used as a server (Xserve, Mac Pro, Mac Mini). This information is a bit dated as the referenced software is Snow Leopard Server (OS X 10.6), and the hardware is older also, but it should give you a general idea of what you might need to look for.
Regards,
Jeff D.

How to know oracle client or oracle server installed in m/c ?

Hi all,
Could any one tell me how to know whether oracle 10.1 s/w installed in my machine is client version or server . Is there any easy method..??
Thanks in advance.

Hi,
Check the database / dbs folder exist in the $ORACLE_HOME if yes then SERVER else CLIENT.
PS: Above is not a standard method, i am telling based on DIRECTORY.
Regards,
Taj

Developer 2000 - Server Install - Client Install

Similar Messages

Maybe you are looking for