Developer 5.x/6.x Running under VMS/Character Mode?

Does anyone know, or can you point me to a document that
will tell me if Developer 5.x or 6.x will support forms running
in character mode under Compaq (formerly Digital) VMS?
I have a client with a large installed based of Forms
4.5 applications running in Char mode now, and we need to plan
for the future.
thanks
Tom
null

Hi,
Do u have any solution for this. If so please let us know.
Mani R
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Goh S H:
Hi,
Does anyone know what this error stand for? (under character mode running on sun solaris 2.6 and oracle 8.1.5)
dlopen gets error 'ld.so.1: f60run: fatal: illegal pathname' when opening object
This error happen randomly.
Your help will be appreciated. Thanks
Regards,
Goh S H<HR></BLOCKQUOTE>
null

Similar Messages

Run report in character mode

I changed the settings of Report Properties to "Design in Chracter Units", and properties of Main Section, Section: "Width" and "Height", "Report Width" and "Report Height". I also changed the settings Preferences of Menu-Tools to "Character Mode" and Rulers in Menu-Format.
However, some reports were changed to character mode (interface), some not when I run them in Report Previewer.
I do not know why. I created and run them on Windows NT.
Thank you for any instruction.

Did you set the system parameter MODE = Character?
null

REP-1352 when running web reports in character mode on linux server

Hi
After migration from 6i to 10g we have problems when we run reports in character mode on a linux (Red Hat Enterprise 4) application server (10.1.2.0.2).
The error REP-1352 occurs with any NLS_LANG or report's font setup. Original report's font is Courier New (Occidental) and NLS_LANG=FRENCH_FRANCE.WE8ISO8859P1.
I created a new simple report in character mode with font Courier New and it is generated successfully.
Witch migration step could I apply to avoid this error ?
Thanks in advance.

I didn't precise that reports failed to be executed with desformat=delimited but succeded with desformat=pdf.
Why Reports server on linux is unable to generate a full text report but can generate a pdf report ?

How to get list of VMs running under SCVMM using SCORCH activities

hello,
I am in learning phase on SCORCH...I wants to know steps required to get list of VMs running under SCVMM using SCORCH activities.
Thanks
Richa KM

Hi,
Here is a list of activities:
System Center Virtual Machine Manager Activities
Integration Packs for System Center 2012 - Orchestrator
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

CVI developed DLL running under VB

I have a DLL I've authored in CVI. The DLL runs under VB. In the DLL I need to monitor a serial port for a while (several seconds) during a function call. If I periodically execute ProcessSystemEvents() in the DLL loop, will the VB GUI stay responsive? I.e., does ProcessSystemEvents() allow processing GUI events for a non - NI developed GUI?
Thanks,
Menchar

Hi menchar,
I responded to your other duplicate post.
Best Regards,
Jonathan N.
National Instruments

How to allow access to web service running under ApplicationPoolIdentity

Hi All,
I have a WCF web service hosted in IIS 7 (or maybe 7.5, whichever comes with Windows server 2008 R2) using DefaultAppPool running under ApplicationPoolIdentity per Microsoft's recommendation. The web service needs to call a stored procedure to insert data
to a db. The web server is on a different VM than the database server. The db server is running SQL 2008 R2. Both VMs run Windows server 2008 R2.
When the web service tries to connect to db, it encounters this exception:
Exception in InsertToDb()System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
Here's the connection string in web.config:
Application Name=somewebservice;Server=somewebserver;Integrated Security=SSPI;Database=somedatabase;Connection Timeout=60"
How should I configure SQL security to make this work?
Thanks in advanced.

Thanks for the link Dan. Maybe I'm the one who cause the confusion :)
If I understand you(and Erland) correctly, you suggest using a custom, domain account for application pool identity. However, if we do that, our IT will need to maintain those accounts, and they don't want that. So I'm choosing a built-in account called
ApplicationPoolIdentity as the application pool identity, but it's not working. Network Service, on the other hand, works, but my boss wants us to follow MS's best practice.
What's puzzling is that according to this: http://learn.iis.net/page.aspx/624/application-pool-identities/, both Network Service and ApplicationPoolIdentity uses machine account to access network resource (like db in this case), but in my case, Network Service
works, but not ApplicationPoolIdentity.
Hallo Stephen,
with respect - it seems to me that only idiots are working at your IT ;)... It is absolutely useful to work with "service accounts" created within the domain. That's the only way to manage and control accounts!
If you want to "pass through" the identity of the web user (SSO) you have to check whether the app pool is set to "allow impersonate". As far as I understand the ApplicationPoolIdentity-function the app pool will create a unique user named as the service.
I assume that will not work with the connection to the sql server because this user is unknown.
Local Service will not work because it's restriction is located to the local machine.
Network Service will work because access to network resources will be available.
So my recommendation is to use a dedicated service account or impersonation:
http://msdn.microsoft.com/en-us/library/xh507fc5.aspx
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITS Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de

RE: How to have multiple application running under one server

          I have one server
          I have many application
          Question: Is it possible for me to have a weblogic properties file under each
          of this application.


If your question is whether you can run multiple instances of WebLogic
          (or multiple applications) on one server, the answer is yes. The only
          problem is, you must have a unique port for each of the servers to run
          on. I.e., they can not all run under port 80 which has obvious
          internet/network implications.
          This also means you have multiple weblogic.properties files etc. for
          each instance.
          We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
          multiple developers run their own instance on one box.
          Dano
          Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
          > No if you are running single instance of wls.
          >
          > Kumar.
          >
          > Sonny wrote:
          >
          > > I have one server
          > > I have many application
          > > Question: Is it possible for me to have a weblogic properties file under each
          > > of this application.

Application Runs Under Windows 8.1 But Not Under Windows XP (I Know XP Is Deprecated)

The problem is with the obtuse error message put out by Windows's program loader. It reads, in part, "..is not a valid Win32 application." The application runs everywhere except on Windows XP. Looking for root cause of the problem. It's a very
simple application. Only a few lines of code.
C:\Packaged-Software\32-BIT\Reboot.exe is not a valid Win32 application.
Proposed nature of the problem:
1. The file was downloaded from a website but the download was incomplete.
2. The full file system filename path contains bad characters such blank space.
3. Visual Studio constructed an application that won't run anywhere much less on XP.
4. The supporting libraries are not properly installed (e.g. .NET Framework4, and VCREDIST).
Retorts:
1. The file wasn't downloaded from a website and is intact.
2. The filename path doesn't contain any spaces.
3. The application runs under Windows 8.1. Also on Windows 7.
4. The supporting libraries are properly installed.
So, what's the problem? One surely will not discover the root cause from "not a valid application."
Body must be 4 to 60000 characters long. I had put the code here. It isn't 60000 character long. But it validated as if there are more than 60000 characters. Sorry for the incomplete submission due to website construction error.
MARK D ROCKMAN

Hi F7H2fw,
How did you develop the application ?
Here is a similar symptom and this may explain the issue somehow:
Setup.exe is not a valid Win32 application
http://blogs.msdn.com/b/vsnetsetup/archive/2012/10/16/setup-exe-is-not-a-valid-win32-application.aspx
I suspect there is a compatibility issue here .
Considering this is more likely a developing issue .It is recommended to ask for help from our MSDN Forum .They are more familiar with the developing issue .If it is possible ,please attach the code in that thread .Thanks for your understanding and cooperation.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SQL script runs under SQL Devoper, will not run under UNIX, SQLPlus

I have a sql program I developed under the SQL Developer tool and it runs fine. I have ftp'd the sql to the Unix server and I am trying to run the same program under SQL Plus in unix. The program echo's back the line number that is the last line number in the code before the 'Exception' code in the program and it goes out into never never land.
I can't figure out why this runs under SQL Developer but will not run under SQLPlus in Unix. Any ideas would be appreciated!!!!

Assuming that the ftp process did not append any invisible characters(which it usually does) at the end of each line,
did you put the '/' symbol at the end of your program before running in sql*plus
something like
begin
end;
/

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

Why oh why won't AE CS5 run under XP Pro 64 bit?

Francly, i'm getting fed up of this stupid CG world we live in where users have to juggle and zig zag in between the permanent idiotic capitalistic software development battles going on way above our heads for teh sake of profit.
I have a little pipeline of 20 machines, couple of servers, couple of workstations and a bunch of render nodes. 80% which were set up with Vista (Pro Ultimatte and Business) had to be downgraded to XP Pro 64 for compatibity issues with some of the tools i was using, plug ins for 3ds max and AE mostly. believe it or not, downgrading from this piece of crap Vista did cost me money! ...and now that it is all finally running properly... the one tool i use for compositing in my pipeline that is AT LAST (and the last tool of its kind!!!!) 64 bit native.... WILL NOT RUN UNDER XP 64!!!! Which means that just because for reasons i absolutely ignore Adobe is forcing me to upgrade all operating systems on my network in order to finally benefit of what AE should have been able to do already for at least over a year! Wow! great marketting plan!
So i'm asking two questions here... and excuse my lack of formality....
1 - ARE YOU FREAKIN KIDDING ME?????!!!!
2 - What are my options if i want to upgrade to AE and Premiere cs5 in order to finally make a full use of those within the 64 bit pipeline (that all my other tools are already set up for ...for years!!!!) without having to spend s#itloads extra in operating systems and other consequent upgrades? Cause as much as i'm willing to go with the flow... i'm just fed up with wasting my money over political decisions ADOBE, AUTODESK, MICROSOFT and more are making just to squeeze a little more each time.
pe@ce,
Adriano Zanetti

Obviously you did not really read my post, so i'm gonna make it more clear.
I was forced to downgrade to XP pro 64 bit in order to follow what you call "progress", in order to use new tools, new releases, new possibilities, such a Nvidia PhysX related tools which would not run under Vista 64 at that time.
Now instead of shooting in my legs and make me look like i belong to the prehistoric times, try to answer my question honestly and properly since you bother doing so. Not developping CS5 for XP 64 is either an agreement made with Microsoft, or a way to cut down costs on a development that was already a big fat money pit since it took ages to finally come up with a 64 bit version Premiere and AE, after YEARS of existence of 64 bit systems. You can try to make me look as dumb and bad as you want... but those are facts that don't make Adobe's purpose and motives look very neat.
Now to read from a "community professional" that what i thought was my legitimate request as a commercial user and active member of the industry is basically irrelevant because "it's all my own fault"... wow!
Now i don't have access to the same information you have it seems, but look at the amount of users who are still working in the caves like me running Win XP 64 for similar reasons and tell me if it is a considerate choice from Adobe to neglect them. As most professional in this business, i like to be informed and NOT FORCED! Seems fairly decent to expect from Adobe to be notified earlier... much earlier than on the release date of the upgrade that my set up will be obsolete!
And for the very same reasons i did not renew my Autodesk subscriptions... i shall not upgrade to CS5 and will look an other way to find a cheaper more "personal/people" oriented solution, one where the support will not slap in my face "it's you own fault" like ADSK and Adobe do when you tickle relevant topics.
Conclusion, i don't like it... and i don't feel i've put myself in this pinch, but thanks for your answer Mylenium, i'm one step closer to invest in The Foundry Nuke as a compositing solution and open source alternative for editing.
Adriano

SSO to partner application running under IIS

Hi,
We have a complete set-up for 9iAS Release2 where some applications are running. In parallell we have an application running under IIS, and would now like to enable the IIS application as a partner application to 9iAS letting the 9iAS SSO server handle the authentication.
In the documentation of Oracle Proxy Plug-in I read that this proxy plug-in can be used to proxy requests from IIS to Oracle http server (OHS) and also in this way enable SSO.
My question is if this can be done only for applications running under 9iAS but having IIS as web server, or if it is also possible like in our case to enable SSO via the proxy plug-in to applications runnind under IIS?
If this is not supported is the only available solution to use the SSO SDK in my IIS application?
Thanks and regards,
Rikard

Here's a DIY answer.
See Metalink Note 269820.1 which shows you how to use Perl to overwrite the host name in the HTTP header and remove the port number.

Global data getting reset when running under IIS?

We have a scenario using IIS with an ASP.NET web service written in VB.NET. When a call to the web service is made, the web service calls a native dll (written in C, compiled using VS2010) using platform invoke, which in turn calls into our product API:
VB.NET web service -> native library (p/invoke) -> native API ....
Web service requests are successfully completed and the system runs without problem for hours. A trace of the native API shows it is being called by multiple processes and multiple threads within those processes.
The main native API dll contains a static global variable used to detect whether it is the first time it has been called and run initialization logic if it is. This dll is itself linked to a second dll that contains a global variable used to detect if it is
the first time it has been called.
After some hours the trace shows that the native API is invoked by an existing process but that the initialization logic is being exercised again, even though the global variable was set to indicate not first time and is never reset. One theory was that
the first process has ended and a new process has started almost instantaneously using the same process ID. However this is not the case as existing thread IDs from the same process are seen to write to the trace again after the first time logic has executed
for the second time, indicating the process has not restarted. The problem occurs regularly.
It is as though the process's global data has been initialized again and malloc'ed memory freed while the processing is still running. Is there any way this is possible when running under IIS?
There is an internal thread which waits on a blocking read of a named pipe (via ReadFile), and when the problem occurs, the ReadFile call ends with ERROR_NO_ACCESS, which appears to indicate the malloc'ed buffer is no longer valid, again implying something
has happened to the memory allocated to the process.

Suggestting you asking it on:
http://forums.iis.net/

JavaSoundRenderer now running under Windows

Hello,
I found out that the JavaSoundRenderer could run under Windows but only if you use Java 6.0 Beta.
So if you've problems of playing audio in Windows then just install the new Java (6.0) and it will work.
best regards,
thomas

Hi,
Refer [SAP Note:1337708 - Crystal Reports support of 64 bit Operating Systems|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333333333337333733303338%7D.do] and also have a look at
[SAP Note:122050-An error has occurred while attempting to load crystal reports on 64bit|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233323330333533303331%7D.do] might be helpful

Installing XP, running under VMWare

I am brand new to a Mac, and have found the Mac Pro I received a week ago was great to upgrade. Adding both memory and a new Caviar Black 1T drive this morning was the quickest/easiest upgrade I've ever done.
I am currently formatting the new drive I just installed. The Format settings are Mac OS Extended (journaled), and the erase option was set to Zero out the data - I'm assuming this will ensure bad blocks will be marked as they are found - *Out of curiosity, does the disk utility mark bad blocks when found during the Zeroing out process?*
I'm hoping to avoid problems with the way the drive is set up prior to installing VMWare, XP, and moving files onto the drive.
Does VMWare Fusion deal with the format differences between what XP expects (NTFS) and the HFS+ format of the new drive? If not, do I need to do anything to handle this issue?
Secondly, I want to load XP from my MSDN disks - All of the Microsoft operating systems are contained on the MSDN disks. Anybody know if this will cause an issue?
Should I install XP for both VMWare and Bootcamp? Or can I run fine with a single copy running under VMware?
Thanks in advance,
Michael

Zeroing with OS X Disk Utility seems very iffy and not as good as if you use vendor supplied utility which runs in Windows. I've even done 7-way write in Disk Utility and the drive showed problems.
I suggest you try something else than DU. MicroMat TechTool Pro seems able to identify weak or bad sectors, does not have means to remap. Intech Speedtools should be able to, and may, but that's another $89.
LIfeguard from WD, Seatools from Seagate... those are better.

Developer 5.x/6.x Running under VMS/Character Mode?

Similar Messages

Maybe you are looking for