Developer 6.0 and starter database on NT

Hello
I had Oracle 8.0 on NT and i usually use it
But now when I install Developper 6.0 i can't
start the database. I had error
"Procedure entry point nsevevent could not be located in the dynamic link library NS80.DLL"
Removing developer 6.0 and reinstall my oracle database, then my database work well before i re-install developer 6.0
I copy the NS80.dll in temp directory, install developer and reput my copy of NS80.dll in oracle directory, I got the same error message.
Using Developer to start database or using oracle application (navigator, sqlplus..) or try manually and I got the same message.
If anyone know how to make developer6.0 and oracle 8.0 working on NT, make me a reply
please. I'm trying to do my OCP (developer) at home so all my work is stopped by this.
Thank

Are you using Oracle 8.0.3?
I also could not make it work with Dev6 (I remember it also gives you such a warning before starting installation). I then installed 8.0.5 and Dev6 works flawlessly with this.
regards,
M. Armaghan Saqib
* SQL PlusPlus : Add power to SQL Plus command line
* SQL Link for XL : Integrate Oracle with XL
* Oracle CBT with sample GL (Triggers and Forms Source Code included.
Download free: http://www.geocities.com/armaghan/
------------------------------------------------------------------------

Similar Messages

Log on to remote server and start database -error while installing CI in HA

Hello All,
We are installing ECC 6.0 with High Availability using HP-UX. We have completed installation in ASCS and Database Instance. Now when were trying to install in Central Instance, we encountered an error at Start Instance which informed us to Log on to remote server and start database. However the database is already running in DB node. Please find the log below.
TRACE 2011-06-10 16:31:45.825 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25742
INFO 2011-06-10 16:31:45.835
 CJSlibModule::writeInfo_impl()
Output of /usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001 is written to the logfile start_PE2_DVEBMGS01.log.
WARNING 2011-06-10 16:31:46.345
 CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/PE2/SYS/exe/run/startsap all DVEBMGS01 DBMCI001" finished with return code 6. Output:
Database PE2 must be started on remote server
Log on to remote server and start database
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:408]
 handleException<ESAPinstJSError>()
Converting exception into JS Exception EJSException.
TRACE 2011-06-10 16:31:46.355
Function setMessageIdOfExceptionMessage: ind-rel.ind-os.ind-db.webas.startInstanceFailed
WARNING[E] 2011-06-10 16:31:46.355
 CJSlibModule::writeError_impl()
CJS-20022 Could not start instance 'DVEBMGS01' of SAP system PE2.
TRACE 2011-06-10 16:31:46.355 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
TRACE 2011-06-10 16:31:46.405 [syuxctask.cpp:1382]
 CSyTaskImpl::start(bool)
A child process has been started. Pid = 25793
ERROR 2011-06-10 16:31:46.525 [sixxcstepexecute.cpp:950]
FCO-00011 The step start with step key |NW_ABAP_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|10|0|NW_CI_Instance_Start|ind|ind|ind|ind|2|0|start was executed with status ERROR .
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Central Instance . You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to /tmp/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/CI. </body></html>
TRACE 2011-06-10 16:31:46.555 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Kindly let us know how to rectify the error and prroceed further with the instalaltion.
Thanks
Rishi

Dear Guys,
we didnt change the date and time but i m very sure it is same trans.log file.
for your kind information please note SID and Nodes details
Sid (PE2)
DB Node : DBMDB001
CI Node : DBMCI001
also i am attaching starting part of the file.
4 ETW000 R3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.11.2010 - 03:44:06
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Sun Nov 7 03:44:06 2010 295 0.000295
4 ETW000 [dev trc ,00000] db_con_init called 22 0.000317
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 116 0.000433
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' ...
4 ETW000 64 0.000497
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/PC1/SYS/exe/run/dboraslib.so), hdl 0
4 ETW000 32161 0.032658
4 ETW000 [dev trc ,00000] Library '/usr/sap/PC1/SYS/exe/run/dboraslib.so' loaded
4 ETW000 39 0.032697
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 111 0.032808
4 ETW000 [dev trc ,00000] Version of '/usr/sap/PC1/SYS/exe/run/dboraslib.so' is "700.08",
patchlevel (0.25)
4 ETW000 265 0.033073
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 41 0.033114
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library
/usr/sap/PC1/SYS/exe/run/dboraslib.so
4 ETW000 82 0.033196
4 ETW000 [dev trc ,00000] New connection 0 created 52 0.033248
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 41 0.033289
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 84 0.033373
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 31 0.033404
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES,
reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.033441
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.4.0' 601 0.034042
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 25 0.034067
4 ETW000 [dev trc ,00000] Client character set UTF16 -> UTF8 35674 0.069741
4 ETW000 [dev trc ,00000] Client NLS setting (OCINlsGetInfo): 'AMERICAN_AMERICA.UTF8'
4 ETW000 57 0.069798
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 55 0.069853
4 ETW000 [dev trc ,00000] Connecting as /@PC1 on connection 0 (nls_hdl 0) ... (dbsl 700
151208)
4 ETW000 34 0.069887
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 52 0.069939
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 58 0.069997
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 40 0.070037
4 ETW000 [dev trc ,00000] Allocating server context handle 27 0.070064
4 ETW000 [dev trc ,00000] Attaching to DB Server PC1
(con_hdl=0,svchp=0x600000000106aa68,srvhp=0x600000000106de78)
4 ETW000 63 0.070127
4 ETW000 [dev trc ,00000] Assigning server context 0x600000000106de78 to service context
0x600000000106aa68
4 ETW000 60612 0.130739
4 ETW000 [dev trc ,00000] Allocating user session handle 97 0.130836
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0,
usr='/',svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 64 0.130900
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 9302 0.140202
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=53, stmth_p=0x6000000001077608)
4 ETW000 198 0.140400
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_MODULE(:A0,:A1); END;
4 ETW000 38 0.140438
4 ETW000 [dev trc ,00000] CbApplInfoGet() failed! Ignore, but uninstall callback to avoid more
erroneous calls
4 ETW000 291 0.140729
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001078660)
4 ETW000 33 0.140762
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 35 0.140797
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 937 0.141734
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.141770
4 ETW000 [dev trc ,00000] Connected to session 297. 639 0.142409
4 ETW000 [dev trc ,00000] Now '/@PC1' is connected: con_hdl=0, nls_hdl=0, session_id=297.
4 ETW000 38 0.142447
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 37 0.142484
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 36 0.142520
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001078660)
4 ETW000 327 0.142847
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 36 0.142883
4 ETW000 [dev trc ,00000] Got SAPSR3's password from OPS$-user 728 0.143611
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 38 0.143649
4 ETW000 [dev trc ,00000] Rolling back transaction ... 31 0.143680
4 ETW000 [dev trc ,00000] Closing user session
(con_hdl=0,svchp=0x600000000106aa68,usrhp=0x60000000010fc940)
4 ETW000 210 0.143890
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 721 0.144611
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@PC1 on connection 0 (nls_hdl 0) ... (dbsl
700 151208)
4 ETW000 40 0.144651
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C
EnvHp ErrHp ErrHpBatch
4 ETW000 37 0.144688
4 ETW000 [dev trc ,00000] 0 UTF8 0
0x6000000001052910 0x600000000105a3c0 0x600000000106ab38
4 ETW000 37 0.144725
4 ETW000 [dev trc ,00000] Assigning username to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 35 0.144760
4 ETW000 [dev trc ,00000] Assigning password to user session: con_hdl=0,
usrhp=0x60000000010fc940
4 ETW000 40 0.144800
4 ETW000 [dev trc ,00000] Starting user session: OCISessionBegin(con_hdl=0, usr=SAPSR3/<pwd>,
svchp=0x600000000106aa68, srvhp=0x600000000106de78, usrhp=0x60000000010fc940)
4 ETW000 337 0.145137
4 ETW000 [dev trc ,00000] Assigning user session 0x60000000010fc940 to service context
0x600000000106aa68
4 ETW000 4085 0.149222
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=54, stmth_p=0x6000000001077608)
4 ETW000 63 0.149285
4 ETW000 [dev trc ,00000] BEGIN DBMS_APPLICATION_INFO.SET_CLIENT_INFO(:A0); END;
4 ETW000 37 0.149322
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 585 0.149907
4 ETW000 [dev trc ,00000] SELECT SID FROM V$MYSTAT WHERE ROWNUM<2
4 ETW000 36 0.149943
4 ETW000 [dev trc ,00000] Connected to session 297. 350 0.150293
4 ETW000 [dev trc ,00000] Now 'SAPSR3/<pwd>@PC1' is connected: con_hdl=0, nls_hdl=0,
session_id=297.
4 ETW000 38 0.150331
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.150369
4 ETW000 [dev trc ,00000] ALTER SESSION SET NLS_SORT = BINARY
4 ETW000 34 0.150403
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 294 0.150697
4 ETW000 [dev trc ,00000] SELECT VALUE FROM V$NLS_PARAMETERS WHERE PARAMETER IN
('NLS_LANGUAGE', 'NLS_TERRITORY', 'NLS_CHARACTERSET') ORDER BY PARAM
4 ETW000 66 0.150763
4 ETW000 [dev trc ,00000] ETER
4 ETW000 34 0.150797
4 ETW000 [dev trc ,00000] Database NLS settings: AMERICAN_AMERICA.UTF8 329 0.151126
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 856 0.151982
4 ETW000 [dev trc ,00000] SELECT UPPER(INSTANCE_NAME),HOST_NAME,VERSION,TO_CHAR
(STARTUP_TIME,'MON DD, YYYY, HH24:MI:SS') FROM V$INSTANCE
4 ETW000 36 0.152018
4 ETW000 [dev trc ,00000] DB instance PC1 is running on scmdb001 with ORACLE version
10.2.0.4.0 since NOV 07, 2010, 03:23:10
4 ETW000 349 0.152367
4 ETW000 [dev trc ,00000] -->oci_prepare_stmt(con_hdl=0, len=0, stmth_p=0x6000000001077608)
4 ETW000 38 0.152405
4 ETW000 [dev trc ,00000] SELECT SUBSTR(NAME,1,3), TO_CHAR(CREATED,'YYYYMMDDHHMMSS')
FROM V$DATABASE

Stop and start database for cold backup

Hi,
Database :Oracle 10g R1
OS : Red hat 3
I have a RAC database with 2 nodes.
I build this script to make a cold backup of the database. (I will put it in the cron tab).
My question is the SRVCTL will work in this scripts??
# ***** COLDBACKUP ORACLE DATABASE ON LINUX *****
DIRECTORY=/u02/backup/script/; export DIRECTORY
cd ${DIRECTORY}
# ***** SHUTDOWN THE DATABASE *******
export oracle_sid=RCDB
srvctl stop database -d RCDB
# *****cold backup for "RCDB" database on 13-FEB-07 ... *****
# ***** COPY FILES *****
# Redo logs
cp /u02/oradata/RCDB/redo01.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo07.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo03.log ${DIRECTORY}
cp /u02/oradata/RCDB/redo08.log ${DIRECTORY}
# Datafiles
#*********START UP DATABASE AND SERVICES********
srvctl start database -d RCDB
exit
Message was edited by:
ASkika
Message was edited by:
ASkika

I need to put a quick policy backup ... and cold
backup it's what I use and it works.And reduces the availability of your cluster.
The problem about RMAN is that we never use it. I
have to learn about it to make scripts to test....
and this will tack me 2 or 3 days...I'd assume that installing RAC didn't go overnight, so why underfund the crucial part of any database system, the backup?
There's even a step by step guide for backup on the Getting Started: DBAs page.
Samples (and changes) on the latest version of RMAN can be found for example in RMAN Enhancements.
Or take a look at this Oracle Magazine article:Faster Backup, Faster Recovery
Backup and Recovery Basics in the user documentation may also be a good starting point.
C.

Stopping and starting database in 10G OEM

Hello, has anyone run into an issue trying to stop and then start a database within the OEM console in 10G? We are able to stop and start the db with sql and windows services. We can stop the db in OEM but can't start it.

When you come to the startup/shutdown:confirmation page before actually starting up the db, does the Operation parameter say "startup database in open mode" or is it "... in mount mode"?

Stop and start databases

I need to shutdown all my databases (ifs_Data and OEMREP), because computer people are going to run periodically a process to backup them. But I cannot find how to stop and start my oracle databases by commands (I need to create a bat file). I am using Win2000, Oracle 9 and iFS 9.0.1
Thanks for the suggestions,

This can be a procedure to shutdown a database:
SET ORACLE_SID=<database_sid>
sqlplus /nolog
conn / as sysdba
shutdown <option>;
exit
<option> = Abort ( Not recommendable ), Immediate, transactional, normal.
Joel Pérez

Installing and Starting Database

Hi,
I have installed Personel Oracle8.1.5 in an Stand alone PC by selecting Client Installation option. When I completed my Installation I have given a service name also but there is no option to start database unlinke in Oracle7. When I go to SQL Prompt by entering Scott/Tiger or Scott/Tiger@ORCL it is giving error like,
- ORA-12560: TNS:protocol adapter error
and
- ORA-03114: TNS:no Listener
and many messages.
Please help me...
I will be very much thankful.
Syed Muzzammil

Hi Simon,
a silly question just to clarify the issue: Do you have a MaxDB Installation on your PC where Database Studio was installed?
What does the Event Log tell you about the issue?
See Window->Show View->Event Log Viewer
or if not listed there
Window->Show View->Other ...->Database Studio->Event Log Viewer
Could you please have a look and tell me what it says? If you find a message that is related to your problem double click it and press the little Copy to clipboard icon in the upper right corner then you can paste the message in your reply.
Cheers,
Daniel

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

Stopping / Starting database instances

Guys
How does one shutdown and start databases from the linux command
prompt.
Many thanks
null

1. Make sure your environment is set for the correct database
(PATH, ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH)
2. To shutdown the database, enter the commands below at the
command line:
svrmgrl
connect internal
shutdown immediate
exit
3. To startup the database:
svrmgrl
connect internal
startup
exit
Sunday Oke (guest) wrote:
: Guys
: How does one shutdown and start databases from the linux
command
: prompt.
: Many thanks
null

How to Install emacs, openssh and start oracle database and get a connect?

As suggested by another poster, I installed the prebuilt appliance at [http://www.oracle.com/technetwork/community/developer-vm/index.html] and [http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html] with the intent of running oracle database in a linux vm as a guest on windows 7 and connecting to it using JDBC from the windows host.
This is running but I don't know how to install other stuff. I tried "sudo yum install openssh" and "sudo yum install emacs" and "sudo service sshd status" and none of these worked (it could not find these packages). I could not get apt-get or app-get or aptget to work either. I was hoping that "uname -a" would tell me if this was fedora or debian or something else but no luck. What command do I use to learn the distro name?
How do I make ifconfig tell me what the ip address so I can use "scp" and "ssh" to get into the box? Ok, /sbin/ifconfig works and I see there is only a loopback address. Ack! How do I create a socket so I can ssh into this little beastie?
How do I disable the firewall or (better yet) punch holes in it so I get use JDBC and ssh, scp and samba from windows 7?
I tried firing up the SQL Developer 3.1 and getting a test connection with username and password of "oracle" with no luck. How do I get a test connection to work?
How do I determine if the database is running? If not, how do I start it and stop it and restart it?
Thanks
Siegfried
Edited by: user8816970 on Sep 15, 2012 6:29 PM
Edited by: user8816970 on Sep 15, 2012 6:33 PM

There is no "oracle" account native to the database itself. This is just the default account that owns the application. Log on as oracle/oracle to the OS. (OEL) You can change the passwords of the sys and system account by setting your $ORACLE_HOME and $ORACLE_SID. Default SID is orcl on a database install. Also set a path to the oracle binaries in the form of $ORACLE_HOME/bin.
Then sqlplus / as sysdba
Change passwords of sys and system using the following example.
ALTER USER SYS IDENTIFIED BY [password];
ALTER USER SYSTEM IDENTIFIED BY [password];
The supplied appliance runs oracle enterpirse linux. Not debain or fedora.
Why do you need "emacs"?
I haven't personally load this appliance with Virtual Box but there has to be a readme file somewhere that details all the passwords and etc.

How to manage and prevent database lock for database admin and development

how to manage and prevent database lock for database admin and development
[email protected]

Hi,
can someone advise me some good book or even better a PDF or a white paper on the Web where it's explained well how to design and manage a relational database (that is normal forms, tuning, design, implemantation...)?
I've been working on Oracle databases for a few years as pl sql programmer, but I'd like to read something describing well the relational database theory, because I've been asked to work as database designer.There are many books available in the market, please go through this link -- http://www.amazon.com/gp/bestsellers/books/549646/ref=pd_ts_b_nav
I've been told to read "Fundamentals of Database Systems" by Ramez Elmasri, but I ask here for some more advices.I would strongly recommend reading this book, it was my best reference during my college study and even after starting my DBA career.
Thanks,
Hussein

Remote Desktop Services: corrupt system database, how to remove and start again?

Hi. This is my first Windows Server 2012 R2 installation, and I have a made a small mess. I'd be very grateful for any assistance in sorting it out.
I had some problems which I eventually tracked down to an incorrectly installed SSL certificate, but during my diagnostics, I foolishly deleted a row from a system table, thinking that if it messed up, I could always reinsert the row. Forgetting of course
that I couldn't recreate the ID of the original record because it's an auto-ID field. So I realise I'm an idiot.
I logged in to SQL server using:
\\.\pipe\MICROSOFT##WID\tsql\query
and deleted a row from:
Databases/RDCms/Tables/rds.Target
and from:
Databases/RDCms/Tables/rds.Pool
Predictably enough, the database is no longer coherent and RDWeb is not working properly, and I need to remove RDS and reinstall it.
I thought that removing the RDS server role and adding it again would do it, but the erroneous data is still there.
How can I get rid of it and start from a clean slate?
Thank you in advance for any help.
Stan

Hi Stan,
Thank you for your posting in Windows Server Forum.
Can you let us know the specific error you are facing?
In addition, you can try to use below powershell command to remove the rds role.
Parameter Set: Default
Remove-RDServer [-Server] <String> [-Role] <String> [[-ConnectionBroker] <String> ] [-Force] [ <CommonParameters>]
Remove-RDServer
In addition, you can refer this thread
for reference. Also check "Disaster recovery options for the RD Connection Broker
2012 (HA)" article.
Hope it helps!
Thanks.
Dharmesh Solanki

Error while Installing and Starting SAP Widget Development Tools

Hi All,
I have downloaded Eclipse: eclipse-SDK-3.3.2-win32.zip from http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops/R-3.3.2-200802211800/eclipse-SDK-3.3.2-win32.zip
I am following the link: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c032ae0a-7d6b-2a10-14a1-cc6efb066dfc
for Installing and Starting SAP Widget Development Tools as an Eclipse Plug-in
I am very new to it, So I was following Step by Step procedure.
On the 16th step I am getting an error:
AP Widget Templates (0.12.0.1167) requires feature "org.eclipse.gef (3.3.0)", or equivalent.
I had download the SAP Widget Development Tools.zip file from https://www.sdn.sap.com/irj/sdn/downloads?rid=/webcontent/uuid/b03b6544-c741-2a10-8999-ed04eb2b2c71
While unzipping the eclipse-SDK-3.3.2-win32.zip, there were two errors:
The System cannot find the file specified &
The file name or extension is too long.
I ignored them and continued the unzipping.
Please guide me as to how we can solve this error.
Ankur
Is it because I am using Eclipse 3.3.2 and not 3.3.0? If yes from where I can download Eclipse 3.3.0
Edited by: ankur malhotra on Jul 25, 2008 7:36 AM

Hi Ankur,
This happens sometimes because of the Eclipse that you use. Download the Eclipse JEE Version. When you go to eclipse.org and try to download eclipse you can do a comparision of the versions there, You download the version which supports all the web features.
http://www.eclipse.org/downloads/packages/eclipse-ide-java-ee-developers/ganymeder
Check the above link you will be able to see the package details. Please download this Java IDE for EE developers and try installing the SAP widgets foundation then, If you are facing any problems in installing the plugins thru local archived site please let me know.
Regards,
Sai

"Get Started" URL is rejected and XE database does not appear to start

Hi,
Brand new to Oracle, so I apologize for my ignorance. Have spent 3 days trying to launch the Get Started URL that Oracle puts on my desktop, or connect with Rapid SQL. I've spent all day today trolling these forums and am unable to resolve this issue.
OS: Windows 7 Enterprise SP1
System: i7 @ 2.7GHz, 8GB RAM, 64-bit
DB: OracleXE 11g
Error message from Chrome when I try to connect to http://127.0.0.1:8080/apex/f?p=4950: Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection.
Here is the result of my TNS Ping Utility for 32-bit Windows: Version 11.2.0.2.0 - Production on 16-NOV-2
012 14:42:28
Used parameter files:
C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = CONNECTL
AP28.awi.state.fl.us)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVIC
E_NAME = XE)))
OK (0 msec)
Here is the result of my LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 16-NOV-2012 13:41:57
Uptime 0 days 1 hr. 2 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\CONNECTLAP28\liste
ner\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CONNECTLAP28.awi.state.fl.us)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
Here is the result of my sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Nov 16 14:47:53 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-28056: Writing audit records to Windows Event Log failed
OSD-00512: Message 512 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1722) The RPC server is unavailable.
ORA-28056: Writing audit records to Windows Event Log failed
OSD-00512: Message 512 not found; product=RDBMS; facility=SOSD
O/S-Error: (OS 1722) The RPC server is unavailable.
Enter user-name: system
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Process ID: 0
Session ID: 0 Serial number: 0
I have uninstalled and reinstalled the 64-bit version, the 32-bit version, repaired, stopped and started services, changed KEY_XE.reg, and the properties of the Get Started URL. No luck so far. Please let me know what I can do.
Thanks in advance.

Thank you for getting back to me so quickly!
When I signed in to Event Viewer, I got an error message that my event services weren't running, so I downloaded this fix from Microsoft: http://support.microsoft.com/kb/2478117
That started my Event Services and allowed me to sign into Event Viewer and clear my logs. They are all clear now.
Then I repaired my version of 11G and rebooted, but am still unable to connect to the database or the Get Started URL.
Here are my statuses:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Produ
ction
Start Date 16-NOV-2012 16:31:35
Uptime 0 days 0 hr. 2 min. 30 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\CONNECTLAP28\liste
ner\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=CONNECTLAP28.awi.state.fl.us)(PORT=1
521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> exit
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Fri Nov 16 16:34:42 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL>
At least it's a different error message now! Any ideas?
Edited by: 971714 on Nov 16, 2012 1:40 PM
Edited by: 971714 on Nov 16, 2012 1:41 PM
Edited by: 971714 on Nov 16, 2012 1:41 PM

I bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple

i bought macbook pro used one because i wanna start to develop ios apps and i need Mavericks if it is a possible my mac is 10.6 please help me apple
Model Name: MacBook Pro
Model Identifier: MacBookPro5,5
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP55.00AC.B03
SMC Version (system): 1.47f2
Serial Number (system): W8******66D
Hardware UUID: *****
Sudden Motion Sensor:
State: Enabled
<Edited By Host>

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(121877)

SQL Developer 3.0 EA Certified Databases and Platforms

Is SQL Developer 3.0 EA(including SQL Developer 2.1) certified with the follow OS and DB? Thank you.
Windows 2003 32bit
Windows 2003 R2
Oracle Database 10g Release 2
Oracle Database 9i and Oracle Database 9i R2
SQL Server 2008 and SQL Server 2008 R2
There is certification information below, but not in detailed. So want to confirm as above.
http://www.oracle.com/technetwork/developer-tools/sql-developer/certification-096745.html
Edited by: user780879 on 2011/01/06 2:10

Hi,
There are differentiation between certified and supported.
See Sue's comment on the following thread to have a better idea of this :
Re: SQL Developer with Oracle 9i
9i is supported, not certified.
From your lists, anything which are not listed, hopefully are still supported.
Not sure for SQL Server 2008, though.
Regards,
Buntoro

Developer 6.0 and starter database on NT

Similar Messages

Maybe you are looking for