Developer 6.0/Personal Oracle WIN '98

After a fresh install of both Personal Oracle and Developer 6.0
when I attempt to start the Database I get the following error:
"The Oracle80.EXE file is linked to missing export
NS80.dll:nszclientroles". Upon installation of the DB, prior to
installation of Developer 6.0, the Database starts fine. Any
ideas ?
null

Jack (guest) wrote:
: After a fresh install of both Personal Oracle and Developer 6.0
: when I attempt to start the Database I get the following error:
: "The Oracle80.EXE file is linked to missing export
: NS80.dll:nszclientroles". Upon installation of the DB, prior
to
: installation of Developer 6.0, the Database starts fine. Any
: ideas ?
You cannot put Developer 6.0 and Personal Oracle 8 together on
the same home directory as there are conflicts between their
dlls. Either put them apart (different homes) or use a certified
version of Personal Oracle with Developer 6.0.
Regards,
Rogerio S. Boaventura
null

Similar Messages

Developer 6 (Graphics)/Personal Oracle 7.3.3 - Connectivity

SQL*Plus, Forms and Reports, all seem to connect to Personal
Oracle V7.3.3 OK. However when I connect with Graphics, although
I get a message indicating successful completion, the logon
dialogue box is still displayed and the connection hasn't
succeeded.
Any ideas?
Sean
null

Faisal Shaikh (guest) wrote:
: I amd having problem connecting Developer 6 with Personal
Oracle
: 7. Problem seems to be with TNS.
Faisal,
You may already have resolved this issue but just in case you
are still getting problems, here is some info that may help.
I faced the same problems with Oracle Developer 6 and Personal
Oracle 7.3.3. Oracle Developer 6 uses Net8 to connect to the db
whereas Personal Oracle 7 uses SQL*Net, hence the TNS problems
you have been getting.
There is a solution. Oracle Support suggested that you had to
have a listener running in order for the connection to work. To
do this you needed to instal the SQL*Net Add-Ons from the
Personal Oracle CD, configure TNSNAMES.ora to point to a dummy
IP address and start the listener. When I tried this I
discovered that you don't infact need amend the TNSNAMES.ora
file or run up the listener. As long as the SQL*Net add-ons are
installed, the connection from Oracle Developer 6 to Personal
Oracle 7 seems to work.
Hope this is of some help.
Sean Griscti
null

How to install Developer 6.0 Personal Oracle

When I install personal Oracle 8 (trial)on my pc (Windows NT 4 sp4)I don't have problem and it work well. The problem is when I install developer 6.0,(in a different folder) I can't log on any applications any more.
Thank for your help
Patrice (Quebec)
[email protected]

IF you do not use that "miserable" Personal Oracle 8.04, but using the far much better Personal Oracle 8.1.5 you can mail me at [email protected]
HTH
Martin

Connecting Developer 6 to Personal Oracle 8.1.0.5

I installed Personal Oracle 6.0 and Developer 6.0 on Windows 98 in different homes.
Have I install a network card to be able to connect Developer 6.0 to the personal Oracle 8.1.0.5 ?

Hi, how are you?
I read your file. On my computer, I got the same problem. First I installed Personal Oracle 8.15 version under window 98. The oracle home is e:\orale\ora81. Then I installed Form 8i in the orale home e:\oracle\ora. After installation, there are two SQLPLUS. One is under ora81 and another is ora. The one which is in e:\oracle\ora81 is working and it can bring up the database. Another one and Forms don't work. They can not connect to the local database. It means my client which is under e:\oracle\ora can't connect to my server which is under e:\oracle\ora81. I think I shoud set up the connection in tnsnames.ora by using Net8 Easy Config. I did it. It failed. Can you help me?
Thanks.
<BLOCKQUOTE>quote:<HR>Originally posted by harry dhillon ([email protected]):
No, you shouldn't have to to.
If you have Personal Oraacle 8 running properly on your PC, then you can just connect to the database from Developer V6 using your normal username/password. For example, if you log on to SQLPLUS as scott/tiger, then the same will work for your forms and reports. You don't even need to enter a connect string. I have it working OK on a Windows '98 PC, with Personal Oracle 8i, and Forms v6i.<HR></BLOCKQUOTE>
null

Connection Developer 200 with Personal Oracle 8

Hi,
I have installed Personal Oracle 8 and developer 2000
I am able to work in SQL*plus 8 BUt i am not able
to establish a connection with developer 2000 (Forms as
well as reports )
my queries are
1) what should be installed first
a) personal oracle 8 or developer 2000
b) what about their home directories
2) what all i need to do after installation to establish
a connection between Personal oracle 8 and developer 2000
CAN SOMEONE HELP ME ON THIS
TARUN

install them in 2 separate homes.
start your database listener (lsnrctl start).
create a sqlnet connection using the sqlnet easy config utility
in the forms home.

Which Forms version works with Personal Oracle 8i

Can any one let me know which version of Forms/Developer works with Personal Oracle 8i (8.1.7)? The OS that I have Personal Oracle 8i is Windows 2000. Also is the Forms/Developer version that goes with this available for download? If yes, where?
Thanks in advance,
Aruna.

you can use forms/reports developer 6i (for client/server and web) against 8.1.7 P.E. on windows 2000. I tested this configuration in the past and it worked fine. You can download the forms/reports developer 6i from OTN (from the forms download page).

How to install Personal Oracle 7, Developer 2.1, Designer 2.1

I am a college student who has had coursework in database design and management.
I came across Personal Oracle 7 for Win 95, Developer 2.1, and Designer 2.1.
I am having trouble getting sucessful installation beyond Personal Oracle. Help?!? Documentaion?!?

I am in the same boat also. In the middle of coursework and attempting to run these academic versions of Oracle. There is a patch somewhere but I do not know where. Sorry!

How to get connectivity between Personal Oracle 8.0.0.3 & Developer 2000 (Any Version

Can anybody tell me how to get connectivity between Personal Oracle 8.0.3 and Developer 2000 Rel 2.1 in Win 98 Environment.
I am able to install either Oracle 8 or Developer 2000 but not both, even if I use different Oracle Homes.
When I posted the same question to www.xperts.com someone wrote to me saying that a patch has to be used to get the connectivity.
I have been trying to solve the problem for last 6 months, but could not do it.
Can you please tell me how to get the connectivity or atleast tell me which version will facilitate connectivity in a stand alone PC.
Thanks and regards,
Ashok
null

For Windows98. Worked for me, but no guarantee it will solve your problem.
1) Install Dev2K.
2) Install PO8i in a separate Oracle home.
3) Use the following for TNSNAMES.ORA in your DEV2K Home:
# C:\ORAWINKS\NETWORK\ADMIN\TNSNAMES.ORA Configuration File:C:\orawinKS\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle Net8 Assistant
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
MYORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
null

Personal Oracle 8.1.6 on Win 98

I tried to install persaonal Oracle 8.1.6 on Win 98 and when I start the Oracle using svrmgrl I got the following error
Cannot open registry
software\oracle\homeo\SID_LIST
starting with default sid
Then it asks for password. I tried all passwords and finally got error
ORA-01031 - Cannot logon to Oracle 8i
I have used UNIX. What is the equivalent of ORACLE_SID and ORACLE_HOME of UNIX in WIN 98. Where all sid's of all startup and shutdown databases are stored.
Any body knows.
null

There is NO need to have to installations of PO8 on single machine,you can create two or more instances of databases.
<BLOCKQUOTE>quote:<HR>Originally posted by Sunil:
Is it possible to have two Databases on a single instllation of personal oracle 8.1.6 on win 98.
If not, is it possible to install personal oracle 8.1.6 two times on the same win 98 PC, on diffrent dir/oracle home and use both at the same time.<HR></BLOCKQUOTE>
null

Connecting Personal Oracle 8i and Developer

Hi
The following works for me.
The critical files required are tnsnames.ora, sqlnet.ora and listener.ora.
Put sqlnet.ora, listener.ora and tnsnames.ora in the ORACLE\ORA81\NETWORK\ADMIN directory.
Put sqlnet.ora and tnsnames.ora in the
ORAWIN95\NETWORK directory.
The following are how the files should look.
This is assuming the PO 8I installation defaults were taken (SID is ORCL, and GLOBAL DATABASE NAME is ORACLE).
Listener.ora file:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(PROTOCOL_STACK =
(PRESENTATION = TTC)
(SESSION = NS)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = TTC)
(SESSION = NS)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 2481))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\Oracle\Ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = c:\Oracle\Ora81)
(SID_NAME = ORCL)
tnsnames.ora file:
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = oracle)
(SID = ORCL)
sqlnet.ora file:
TRACE_LEVEL_LISTENER=OFF
TRACE_DIRECTORY=C:\ORACLE\ORA81\NETWORK\LOG
trace_level_client = off
trace_directory_client = c:\orawin95\network\log
#sqlnet.authentication_services=(NONE)
names.directory_path=(TNSNAMES,HOSTNAME)
#names.default_domain=world
#name.default_zone=world
automatic_ipc = off# c:\oracle\ora81\network\admin\tnsnames.ora
TRACE_LEVEL_CLIENT=OFF
TRACE_DIRECTORY_CLIENT=C:\ORACLE\ORAWIN95\NETWORK\LOG
Create a shortcut for listener (C:\Oracle\Ora81\BIN\LSNRCTL.EXE).
Start developer.
Start PO 8i.
Start Listener and enter "start".
You should now be able to connect to Oracle
from Developer using scott/tiger and using oracle as the database name.
Good Luck.
Jim
null

Hi.
I too had problems getting Developer 6 to connect to Personal Oracle 8 on Windows 98.
Thanks to the information Jim posted I am now able to connect.
I followed Jim's instructions with three exceptions.
First exception - On my machine the sqlnet.ora and tnsnames.ora file belong in the ORAWIN95\NET80 directory rather than ORAWIN95\NETWORK directory.
Second exception -- Personal Oracle 8 was installed in C:\ORA81 rather than C:\ORACLE\ORA81 so I adjusted pathnames as needed.
Third exception -- I made backup copies of the sqlnet.ora, tnsnames.ora, and listener.ora files that the installation had created before I started editing them.
My first attempt to start the listener failed with TNS-01152 message which indicated that the addresses provided to listener were not valid.
I replaced the listener.ora file in my C:\ORA81\NETWORK\ADMIN directory with the one that the installation had created then attempted to start the listener again.
The listener started successfully. I attempted to connect from Developer6 using scott/tiger@oracle. Developer6 connected!
Here is what my listern.ora file looks like:
# LISTENER.ORA Network Configuration File: # C:\ora81\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = i8q4v6)(PORT = 1521))
(DESCRIPTION =
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
(ADDRESS = (PROTOCOL = TCP)(HOST = i8q4v6)(PORT = 2481))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\ora81)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORACLE)
(ORACLE_HOME = C:\ora81)
(SID_NAME = ORCL)
Good Luck.
Debbie.
null

Oracle developer & Server 6.0 for win-NT 4.0

Can I install oracle 8.05 enterprise
edition and
oracle developer & Server 6.0 for win-NT 4.0
under the operating system
Windows 2000 professional ?
How can I perform this
without trouble?

I think you can.
You should to place Oracle Server and Developer 6 in different Oracle homes.

Developer rel 6i connection problem to Personal Oracle 8i (8.1.6)

Hi guys!
I have a very general problem regarding the connection to
personal oracle 8.1.6 database from developer 6i products.
I have oracle 8.0.5 client database portion and developer 2.1
installed on my WIN98 machine in as DEFAULT ORACLE HOME.
Then I installed Personal Oracle 8.1.6. in a separate directory
and separate ORACLE_HOME. I am able to connect from the SQL*PLUS
8.0 to the Personal Oracle 8.1.6
Then I installed D2K rel 6i in DEFAULT ORACLE_HOME as I was
informed that FORMS 6i should be installed in the DEFAULT ORACLE
HOME. Now when I try to connect to personal oracle 8.1.6 from
forms 6.0.8, the error message comes as the 'ORA-1034 ORACLE NOT
AVAILABLE '
I made sure that the directory in which the D2K 6i is installed
takes the first precedence in the PATH environment variable of
the AUTOEXEC.BAT
I made sure the listener for the personal oracle is working.
I seek your guidance.
Thanks for your help.
Regards,
Kalpesh.

I have also the same problem. Please help me too with this.

Personal Oracle 8i + Developer 6

Hello,
I'd like to install Personal Oracle 8i + Developer 6 in my computer in order to practice, but when I've finished to install all, I can start database either open developer, but I can't connect to the
database. I think that I must do anything with the tnsnames.ora, listener or sqlnet files. Is it correct? What should I do?
Thanks.

Henry I am having the same problem. Anyone please help.
Thanks
Suresh
<BLOCKQUOTE>quote:<HR>Originally posted by Henry:
Hello,
I'd like to install Personal Oracle 8i + Developer 6 in my computer in order to practice, but when I've finished to install all, I can start database either open developer, but I can't connect to the
database. I think that I must do anything with the tnsnames.ora, listener or sqlnet files. Is it correct? What should I do?
Thanks.<HR></BLOCKQUOTE>
null

Installing Personal Oracle under Win NT4

I'M TRIYNG TO INSTALL PERSONAL ORACLE UNDER WIN NT WORKSTATION, AND I HAVE AN ERROR WITH DR. WATSON.(I THINK AN ERROR WITH ORACLE INSTALLER)
I HAVE SERVICE PACK 5
THANKS.

please checkout for the latest installer coz we too had a problem. we downloaded the latest installer from the oracle site and now it's fine

Problem in installing Personal Oracle 8 and develper 6i on win me

I install personal oracle 8 on my home computer . First time it
install perfectly . After restart my computer i start database,
It mounts and then i use sql + to connect and make some queries.
all is working perfectly ..
Then after i install develper 6i forms on my computer it intall
completely with no errors. After restart my computer i install
develper 6i reports on my computer which is hardly half install
then make some errors .,. which is about a file "msvcrt32.dll".
After that error i mount database which is also make errors
like ....." The ORACLE80.exe file os linked to missing export
NZ*).dll:nztpvec" ORA-12203 CANNOT ATTACH TO ORACLE 8 .
Well i m using Windows ME. and i dont want to reformet and
reinstallation of all other softwares on my computer.
Well if anybudy know what is that error and how to solve it .
Please let me know , i will ever thankfull to them
Well i know my softwares is perfect. there is no errors in CDS
and software.
Anwer

I dont think Oracle 8.1.7 works on Windows XP.

Developer 6.0/Personal Oracle WIN '98

Similar Messages

Maybe you are looking for