Developer 6i on suse linux 7.3 INSTALLATION gives me 'rdbms' error ? what can i do ?

hi
i am trying to install developer6i release 2 on suse linux 7.3 and before installation get the following error :
rdbms' software is not available in the current
distribution source and has not been installed.
You must obtain and install 'rdbms' software from
some other source first.
Note: You may also get this error if the Installer
registry file has been overwritten
what can i do to fix this ???

Similar Messages

Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize". What can I do about this?

Hello,
Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize". What can I do about this?

if mac:
go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774

Downloaded the creative cloud, success in installing photoshop but got an error msg 'installation failed. file is corrupted'. what can I do?

Downloaded the creative cloud, success in installing photoshop but got an error msg 'installation failed. file is corrupted'. what can I do?

Thanks.
I'm using mavericks OS.
Here is a screenshot.
Please let me know what other details you need. I have another team member that wasn't able to install Illustrator.
We both got new computers, upgrading from CS5.5, deactivated the previous version and deleted the file from the old macs.

Oracle Universal Installer gives a fatal error

Hello,
When I start the Oracle Universal Installer to install the Oracle Developer Suite (10.1.2.0.2) I get a Microsoft Fault Report, so the installation will abort.
I had removed first the Oracle installation via the same wizard and then clean up my registry.

Ok, I have found the problem: The installer can't write to c:\documents and settings\pieter\local settings\temp\...
The error is like this: "error in writing to c:\documents and settings\..."
Many users that install Oracle have this error (check google) but I can't find a solution :(
Anyone?

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

Installer build: When run, error: Windows can't open this file xyz.vi

Hello all, I've taken my vi. I"ve created it as an executable. I've taken that...and made an Installer project... This is with LV 2011, and installing to Win7. The installer seems to work fine...but when I try to run the application from the start menu, I get a windows error, saying it doesn't know what to do with my file xyz.vi...that it needs to know what application to open it with....? Any ideas what to do here? The installer seems to install the NI runtime engine just fine...? Would this be due to, on the Installer builder...setting the vi to be read-only and hidden? When I'd done this a previous time, I believe it all worked then... Suggestions? Thank you, cayenne
Attachments:
screen_shot_windows_error.jpg ‏35 KB

Please disregard...I found the problem after going through the older working one....
Late nights and working two jobs...you start to overlook things.
FOr the dependency, I'd put the vi instead of the exe of the vi.....that did the trick.
Thanks all,
cayenne

Linux will not let me upgrade my firefox,what can I do to upgrade?

I have pc Linux os and has firefox 3.6,I want to up grade to latest firefox. but Linux won't let me,how can I upgrade my browser? Thank you,Lon.

First make sure that you meet the system requirements for current Firefox versions.
*http://www.mozilla.org/en-US/firefox/19.0/system-requirements/
*http://kb.mozillazine.org/Installing_Firefox#Linux
Another version to consider is Firefox 17.0.x ESR:
*http://www.mozilla.org/en-US/firefox/organizations
*http://www.mozilla.org/en-US/firefox/organizations/all.html
*http://www.mozilla.org/en-US/firefox/17.0.3/releasenotes/
*http://www.mozilla.org/en-US/firefox/17.0.3/system-requirements/

I am having difficulty installing in solaris 10. installation gives a library error

ld.so.1: firefox-bin fatal: libcairo.so.2 open failed: no such file or directory
ld.so.1: firefox-bin fatal: relocation error: file /var/tmp/firefox/libxul.so: symbol g_slice)set_config: referenced symbol not found

the version I am trying to install is 3.6

SQL Developer 1.0.0 on x86-64 (Suse Linux 10.1)

Has anyone tried running SQL Developer on a x86-64 machine ? I am use Suse Linux 10.1 and get the following error when I try to start SQL Developer -
Exception in thread "main" java.lang.NoClassDefFoundError: java/lang/StringBuilder
at oracle.ide.performance.PerformanceHandler.getPropertyObject(PerformanceHandler.java:41)
at oracle.ide.performance.PerformanceHandler.getFormatter(PerformanceHandler.java:31)
at oracle.ide.performance.PerformanceHandler.<init>(PerformanceHandler.java:25)
at oracle.ide.performance.PerformanceLogger.<init>(PerformanceLogger.java:66)
at oracle.ide.performance.PerformanceLogger.get(PerformanceLogger.java:94)
at oracle.ideimpl.Main.main(Main.java:21)
Thanks in advance !

Here are the JVM details:
echo $JAVA_HOME gives:
/usr/lib64/jvm/java
java -version gives the following:
java version "1.5.0_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_07-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_07-b03, mixed mode)
I did the following after deleting $HOME/.sqldeveloper_jdk file:
./sqldeveloper
Oracle SQL Developer 1.0
Copyright (c) 2005 Oracle Corporation. All Rights Reserved.
Unable to find configuration file: jdk.conf
Type the full pathname of a J2SE installation (or Ctrl-C to quit), the path will be stored in ~/.sqldeveloper_jdk
Entered /usr/lib64/jvm/java for the java path
Now I get the following error:
/usr/lib64/jvm/java
Working directory is /home/venkat-work/sqldeveloper/jdev/bin
Error: hotspot VM not supported
Error: SQL Developer can't recognize the JDK version

ExportAsDrag() Bug in Suse linux???

Hey there,
i have a problem using the exportAsDrag() method of a Transferhandler. On Windows the following code works fine, On Suse Linux, something seem to go completely wrong. What i want to do is to make a drag and drop mechanism. When i click on a label (represented by the following code) the referenced JPanel should be exportet as Dragsource.
private MinimizedPanel(String text, Icon icon, final JPanel mainPanel)
     super(text);
     this.setIcon(icon);
     this.addMouseListener(new MouseAdapter()
          public void mousePressed(MouseEvent e)
               TransferHandler handler = mainPanel.getTransferHandler();
               handler.exportAsDrag(mainPanel, e,
                         TransferHandler.COPY_OR_MOVE);
     }The Transferhandler of the mainPanel is initialized like this:
new Transferhandler("myself");Like already mentioned on Windows everything works fine. But on Linux it seems that the exportAsDrag() method crashes inside, because i cannot drop the mainPanel anywhere, even noone recognized that there is something to drop, and if i try to do drag it a second time, nothing works anymore, even the cursor doesnt change to the drag cursor. The worst thing is that i don�t get any exception message... :-(
Does anybody have any idea why this doesn�t work on linux???
Thanks a lot. If you need more information just ask.
Greetings

You find all (including Linux) installation guides here:
http://www.oracle.com/technology/documentation/database10g.html
But note, this documentation does not cover installation on unsupported Linux versions, here you have to check sources like
http://www.puschitz.com
Greetings
Werner

Error when Installing Oracle XE on Suse Linux 10.0

I am installing Oracle xe on Suse Linux 10.0.
I get following error.
gthomas@linux:~/oraclexe> rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
error: cannot get exclusive lock on /var/lib/rpm/Packages
error: cannot open Packages index using db3 - Operation not permitted (1)
error: cannot open Packages database in /var/lib/rpm
Please help
George

I found another thread in this forum where you can look up how to extend your swap space (look at the bottom of that thread):
re:Out of swap space during 9iAS install.
I am very new to Linux, I am very much disappointed,
I installed Linux with lots of hopes that I can
Install Oracle tools easily on Linux and work
comfortably. Now If I cannot intall a small database
Oracle XE, even with 1GB Ram and 25GB harddrive on
Linux, I don't realize why people run for Linux.
I could Oracle XE on windows on a machine with 512
mb ram in 4 minutes.Maybe you should take into consideration that you are not so "new" to windows and that each new system has a learning curve.
Someone please help.. in detail. How to resize the
swap partition at this point.Look in the provided link.
I have very limitted or no knowldge in Linux.Maybe you should change that or stay with what you know. I don't see any other way ...
As a sidenote, each command under Linux does have a so called "man" page (from manual). You also need to open a shell to access those commands as shown in the thread.
And please, take a look at the commands in that thread before you start implementing, since for example the dd command seems only to create a file with a size of 512M.
Knowing how to use a search engine would also be a valuable asset in your current position.
C.

Sapjco-linuxx86_64-2.1.9.tgz compatible with SuSe Linux 11?

Hi all,
I would like to know whether the sapjco-linuxx86_64-2.1.9.tgz compatible with SuSe Linux 11? if not which and where i can download the jco library?
Thanks.

The maintenance and support period for SAP JCo 2.1 ended on 03/31/2013 and SLES 11 was not supported. See http://service.sap.com/sap/support/notes/549268
SAP JCo 3.0 is supported on SLES 11. See http://service.sap.com/sap/support/notes/1077727 for details and download location.

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

NetWeaver 2004s installation problem on Suse Linux

Hi,
I downloaded NetWeaver 2004s 90 days version from SDN and installed on Suse linux. I am not able to execute command to get the license after installation. Here is the line I executed
add user n4sadm
unpacking adm_env.tar.bz2
Changing password for n4sadm.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sdb
Changing password for sdb.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
add user sqdn4s
unpacking sqd_env.tar.bz2
Changing password for sqdn4s.
New Password:
Bad password: it is based on a dictionary word
Reenter New Password:
Password changed.
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_II.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPDB_III.tar.bz2
unpacking /mnt/iso/server/TAR/x86_64/SAPN4S.tar.bz2
Service visinet-gui on port 3601/tcp was deactivated...
Service cpq-tasksmart on port 3201/tcp was deactivated...
Service netxms-mgmt on port 4701/tcp was deactivated...
Service iwec on port 4801/tcp was deactivated...
Service tick-port on port 3200/tcp was deactivated...
Service netxms-agent on port 4700/tcp was deactivated...
Service iims on port 4800/tcp was deactivated...
Update the necessary information in sysctl.conf:
kernel.shmmax = 23136829430
kernel.shmall = 5242880
kernel.msgmni = 1024
fs.file-max = 32768
kernel.sem = 1250 256000 100 1024
Found interface: eth0 . Alias is eth0:0
ifconfig eth0:0 192.168.155.1 up
Ok
n4shost:n4sadm 35> /usr/sap/N4S/SYS/exe/run/saplicense -get
/usr/sap/N4S/SYS/exe/run/saplicense: Exec format error. Binary file not executable.
Can any one help me to complete the installation and execute the server successfully. I am very new to linux. Do i need to execute any other commands to complete my installation.

Dear Rajasekhar,
this error simply comes, because the architecture of your computer is not the same as the one from the test drive. As I'm not sure, which architecture the N4S test drive uses, we simply have one of the following situations here. Either
your machine is x86_64 and the N4S is i386 or
your machine is i386 and the N4S is x86_64.
Please check!
Thanks,
Hannes

Oracle 10g Installation Problem on SUSE Linux 10

Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root    0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda10             2104376     73112   2031264   4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. Shroff

Hi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                      Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

Developer 6i on suse linux 7.3 INSTALLATION gives me 'rdbms' error ? what can i do ?

Similar Messages

Maybe you are looking for