Developer 6i patchset upgradation

Hi ,
E -biz version : 11.5.10.2
Datbase : 9.2.0.6
Forms Version : 6.8.25.2
Can you tell me how to upgrade the patchset version . which patches to apply first
Please give me step by stop procedure .
Thanks in advance

Hi,
Actually users are unable to open 11.5.10.2 forms on IE8 .when i searched on the net ,it says applyrollup patch and developer 6i patchset .Please refer MOS tech notes:
*Is Microsoft Internet Explorer 8 (IE8) Certified With E-Business Suite Release 11i? [ID 1072324.1]*
*Minimum Baseline Patch Requirements for Extended Support on Oracle E-Business Suite 11.5.10 [ID 883202.1]*
What version of java you are using?
upgraded to jre plugin or still on jinitiator?
thanks,
X A H E E R

Similar Messages

Patchset Upgrade

Hi Experts,
I've been assigned a task to do the oracle patchset upgrade to Oracle 10.2.0.5.0 including interim patches and kernel upgrade.
I've no clue as to how it is done. Could you please help me as to how i can go about with it, including all the planning.
Thanks & Best Regards,
Nidhi

Hello Nidhi,
Download the patschset from marketplace along with the documentation. Go through the entire documentation. It explains everything.
Regards.
Ruchit Khushu.

Oracle database 9.2.0.8 patchset upgrade from 9.2.0.3

Hi,
i have a situation where i upgraded the Oracle software with database as per metalink documentation from 9.2.03 to patchset 9.2.0.8 (Oracle9i Patch Set Release 2 (9.2.0.8) Patch Set 7 for HP-UX PA-RISC (64-Bit) ) (README for 4547809 )
but i could see the $ORACLE_HOME/bin binaries are still at 9.2.0.3, and so v$version dba_registry pointing to same.
i have pasted few lines of patch installation log from Inventory
<------snip----------->
Oracle Universal Installer version is 10.1.0.5.0
Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
*** Welcome Page***
Initializing install inventory
Setting up install inventory
*** Specify File Locations Page***
Setting the 'SourceLocation ( FROM_LOCATION )' property to '/u01/h3a/h3a_ora2/9208/Disk1/stage/products.xml'. Received the value from the UI p
age.
Setting the 'OracleHome ( ORACLE_HOME )' property to '/h3a/h3a_ora2/oracle/product/9.2.0'. Received the value from the UI page.
Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OUIHome3'. Received the value from the UI page.
Warning:*** Alert: You have specified a non-empty directory to install this product. It is recommended to specify either an empty or a non-exi
stent directory. You may, however, choose to ignore this message if the directory contains Operating System generated files or subdirectories
like lost+found.
Do you want to proceed with installation in this Oracle Home? ***
User Selected: Yes/OK
Initializing OUI access setup
Setting variable 'ORACLE_HOME' to '/h3a/h3a_ora2/oracle/product/9.2.0'. Received the value from the UI page.
Setting the PROD_HOME variable of 'oracle.java.jdbc.thin14_9.2.0.1.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oracle_java_jdbc_thin14'. Receive
d the value from the variable calculation.
Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.0.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/jre/1.4.2'. Received the value from the va
riable calculation.
Setting the PROD_HOME variable of 'oracle.swd.opatch_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/OPatch'. Received the value from the v
ariable calculation.
Setting the PROD_HOME variable of 'oracle.swd.oui_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oui'. Received the value from the variabl
e calculation.
Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.1.0.5.0' to '/h3a/h3a_ora2/oracle/product/9.2.0/oui'. Received the value from the va
riable calculation.
Unable to read /h3a/h3a_ora2/oracle/product/9.2.0/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
# The patch iSQL*Plus Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor in the stagi
ng area.
# The patch oracle.apache.isqlplus 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installat
ion.
# The patch Oracle Text Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor in the sta
ging area.
# The patch oracle.cartridges.context 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch Oracle interMedia Locator Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed
nor in the staging area.
# The patch oracle.cartridges.locator 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch Oracle JDBC Development Drivers Patch 9.2.0.8.0 has not been selected for installation because the base component is neither inst
alled nor in the staging area.
# The patch oracle.java.jdbc.jdbc_dev 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for instal
lation.
# The patch JDBC/OCI Common Files Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor
in the staging area.
# The patch oracle.java.jdbc.oci_common 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for inst
allation.
Performing operation for OUI access setup
CRS clusterware not found. Defaulting to vendor clusterware.
Vendor clusterware is not detected.
This is not a cluster system.
Node selection page will not be shown.
Setting variable 'CLUSTER_NODES' to ''. Received the value from a code block.
*** Select a Product to Install Page***
Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 9.2.0.8.0, >9.2.0.8.0, [ ][OH:2]'. Received the value from the default
settings.
*** Select Installation Type Page***
Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.
Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Custom,'. Received the value from the default settings.
No prerequisite checks specified for this installation.
# The patch oracle.options.ano.nis 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installation.
# The patch could not be found in the staging area.
# The patch Authentication and Encryption Patch 9.2.0.8.0 has not been selected for installation because the base component is neither instal
led nor in the staging area.
# The patch oracle.options.ano.sns 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for installat
ion.
# The patch Oracle Wallet Manager Patch 9.2.0.8.0 has not been selected for installation because the base component is neither installed nor
in the staging area.
# The patch oracle.options.ano.ssl.owm 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for insta
llation.
# The patch Oracle interMedia Client Compatibility Files Patch 9.2.0.8.0 has not been selected for installation because the base component is
neither installed nor in the staging area.
# The patch oracle.options.intermedia.imclient.imclicompat 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not bee
n selected for installation.
# The patch Oracle interMedia Common Files Patch 9.2.0.8.0 has not been selected for installation because the base component is neither insta
lled nor in the staging area.
# The patch oracle.options.intermedia.imcom 9.2.0.8.0, which is part of patch set Oracle 9iR2 Patch Set 9.2.0.8.0 , has not been selected for
installation.
# The patch Oracle interMedia Java Advanced Imaging Patch 9.2.0.8.0 has not been selected for installation because the base component is neit
her installed nor in the staging area.
<--------------->
OPatch lsinventory for upgraded ORACLE_HOME returns
PRODUCT NAME VERSION
============ =======
Installer SDK Component 10.1.0.5.0
Oracle 9iR2 Patch Set 9.2.0.8.0
Oracle Universal Installer 10.1.0.5.0
There are 3 components installed.
There is no Interim Patch
any idea what went wrong here?
regards
Deepak.

Setting the 'InstallType ( DEP_MODE )' property to 'Custom'. Received the value from the default settings.Any reason for going in for custom installation?

Lost Developer Toolbar after upgrade from 4.1 to 4.2

After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
Have others run into this with the upgrade or fresh installation of 4.2.1?
If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
{message:id=10692572}
Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
Here are the preferences that exist on our other instances but are null on the problem instance:
APEX_4_1_0_PATCH_12920544
APEX_4_2_0_PATCH_14777994
APP_EXPORT_TO_DB_ENABLED
HPROF_DIRECTORY
INSTANCE_ID
MOBILE_DEVELOPMENT_ENABLED
PRINT_SVR_HOST
PRINT_SVR_PORT
PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
Any advice is welcome.
Skip

Thanks, Joel.
You inspired me to take a closer look, and look beyond the upgrade.
After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
2. Remove workspace (PVA_AH9_R12)
3. (drop the parsing schema, xxpva, and related tablespace)
4. (create tablespace and schema user, xxpva)
5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
Does this suggest anything else I should look into?
Do you think I should post this as a new problem/question with more detail about the sequence of events?
Skip

R12.1.1 / 11.1.0.7 upgrade : Error with 10.1.3.4 patchset upgrade

All,
We are on 12.0.2 / 10.2.0.2 (non-rac) in a split-tier architecture. Web/Forms on the Linux node and Concurrent Managers/Database on the Solaris node. We are now on a project to upgrade this environment to 12.1.1 on 11.1.0.7 db. (Non RAC,Non ASM)
Here are the high level tasks that i laid down
-- Create a project instance (clone from Prod)
-- Upgrade db to 10.2.0.4 from 10.2.0.2
-- Upgrade the techstack Oracle Homes (10.1.2 and 10.1.3)
-- Upgrade the JDK to 1.6.0_X
-- Upgrade 12.0.2 to R12.1.1
-- Upgrade the database to 11.1.0.7
PS: Direct ugprade from 10.2.0.2 to 11.1.0.7 needs us to be on R12 RUP4. So, i decided to do 10g upgrade as an intermediate step. We are following 752619.1 and all the notes that it refers.
We are hitting an issue upgrading the 10.1.3 Oracle home on the Solaris node. The same upgrade completed fine on the Linux node. Here is the description of the issue.
The runInstaller for 10.1.3.4 patchset expects OPMN to be running for a successful patchset installation. On a node with just batch processing enabled, OPMN does not run by default. The installer tries to start OPMN and errors out saying
========
OPMN is failing to start. OPMN must be started in order to correctly install and configure the patchset. Please start OPMN ma
nually in order to continue with the patchset installation.
=========
This is when the installer is at 83%
We tried to start OPMN and managed processes manually using adopmnctl.sh
OPMN starts and is able to start the HTTP server too but not any of the OC4J container components (oacore,forms and oafm). Here are the errors
==========
ias-instance id=afcprj_swafcdev1.swafcdev1.sherwin.com
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
default_group/oacore/default_group/
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/
=========
The logfile that it points to does not have any errors. Looking into the other log files within $LOG_HOME/ora/*3/
, we get the following error in oacorestd.err
=========
09/10/05 16:07:10 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
09/10/05 16:07:15 Error: <connector name="OracleASjms" path="OracleASjms.rar" /> will not be bootstrapped since corresponding module declaration was not found in application.xml.
09/10/05 16:07:17 Error initializing server: Shared library "oracle.ws.jaxrpc" could not be found.
========
I saw some notes and tried updating the config xml files and removed the references to oracle.ws.jaxrpc but to no help.
Installer log has the below error when we attempt the "retry" operation in installation screens.
========
fileName = NonExistentFile
searchString = NonExistentString
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryException
===========
Any help on the above issue? We are never going to use OPMN on this node but stuck here currently !!
Deviating a little bit, if we have to consider moving the concurrent managers out of database node to the
web/forms node (just to avoid having to maintain 2 appl_tops and getting away with doing the above tasks 2 times)
, what are the various things to consider?
-- Network latency
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?
One last question: Why are these adoacore/adoafm scripts taking a long time?
Any feedback is highly appreciated.
Thanks,
Arun

Hi,
Error
--> Process (index=1,uid=1861636864,pid=17677)
failed to start a managed process after the maximum retry limit
Log:
/swafc/applmgr/afcprj/inst/apps/afcprj_swafcdev1/logs/ora/10.1.3/opmn/default_gr
oup~oacore~default_group~1
ias-component/process-type/process-set:
default_group/forms/default_group/Please try the suggested solution in Note: 555214.1 and see if it helps.
Query Exception: FileNotFoundException
Query Exception Class: class oracle.sysman.oii.oiil.OiilQueryExceptionCould you please verify that permissions are set correctly on the application tier node files?
-- R12 being Unified APPL_TOP, can we just try to bring up ICM on Web/Forms node? (just enable the service)Please see (Note: 373611.1 - How to move Concurrent Processing Server from one node to another node) -- Step 3 to 7
-- We are aware that we might have to move the custom top and test custom programs (especially host programs).
Is there any other considerations when moving Concurrent managers from a Solaris node(64 bit) to Linux node (32 bit) ?I would suggest you relink all executable files via adadmin and check then.
Regards,
Hussein

Lost LR3 developed files after upgrading LR4

I purchased the upgrade to LR4 and installed it, however when I imported a folder it didn't carry over the developed files in lR3. Can anyone help walk me through how to do this?

First a grain of caution: create a backup from your LR3-catalog in LR3, close Lightroom.
No LR version is open.
Start then from Explorer on Windows (or Finder on Mac) and locate your LR3-catalog, to open with LR4. Then it will tell you to upgrade. Wait a bit (for me with 90'000 images some 5 minutes), then you have LR4 open with the newly converted catalog.
(Your LR3-catalog should stay untouched, but then you never know - better safe than sorry, that is why I advise for a last backup.)
When you open Lightroom, you usually have already a catalog open. Then you could only "Import from Another catalog", which needs to be converted to LR4 before. Same is true if you have a LR4beta-catalog.
Good luck,
Cornelia

9i database patchset upgrade

Hi,
I have to upgrade 9i database from 9.2.0.6 to 9.2.0.8.
If you will provide me Metalink DOC ID and issues if any faced during this upgrade.Also please mention best back out policy and if any cpu patch needs to be applied.
I think we can apply oct 2008 cpu patch.What is the difference between cpu and psu patch?Suppose I am applying interim patch and it is conflicting with other then in that case how we will identify which merg patch needs to be applied.Please let me know in details if possible.
Thanks,
Mk

user8722581 wrote:
Hi,
I have to upgrade 9i database from 9.2.0.6 to 9.2.0.8.
If you will provide me Metalink DOC IDPatch number on MOS is 4547809 (since you have not mentioned the operating system).
What is the difference between cpu and psu patch?
Refer MOS note 854428.1

Since updating the software on my iPhone 3gs it has developed the so called "white screen of death". The phone has not been dropped or damaged in anyway, the problem only developed after software upgrade. Rung apple and they were less than helpful

since updating my iphone 3gs software it has developed the so called "white screen of death" this happened immediately after software install. It has never been dropped or damaged. I have tried the solution which seems to pop up most of holding down the power button and the home button for 10 seconds but this hasnt helped at all. Tried ringing apple, who were less than helpful and disinterested as the phone is out of warranty. I am hoping there is a solution which doesnt mean shelling out for a new phone! any ideas?

Basics from the manual are restart, reset, restore.
Try all of these.
If these fail, then:
iOS: Unable to update or restore

Issue with developer 6i patchset 19

I am trying to upgrade to the Forms & Reports 6i Patch 19 for HP-UX.
when i start ./patch_install.sh |& tee patch_install_p19.log
it hangs and does not show any sighn of completion
i tried to apply by using
sh -x patch_install.sh |& tee patch_install_p19.log
it hangs at
+ echo /devapp/uat6/conc/uat6ora/8.0.6/lib/libowm2.sl
+ 1>> /devapp/uat6/conc/uat6ora/8.0.6/developer6i_patch19/patch_deinstall.sh
+ [ -f /devapp/uat6/conc/uat6ora/8.0.6/lib/librec60.a ]
+ [ ! -f /devapp/uat6/conc/uat6ora/8.0.6/lib/librec60.a.PRE_P19 ]
+ echodo cp -p /devapp/uat6/conc/uat6ora/8.0.6/developer6i_patch19/lib/librec60.a /devapp/uat6/conc/uat6ora/8.0.6/lib/librec60.a
it is not able to copy.
it tried manually to copy and worked but again if i start the patching it hangs at this stage.
please help me out.

Pl do not post duplicates - Patch 6194129 hangs

Developer 6i Patchset 17 ?

Does anyone know if patchset 17 for forms 6i is ever going to be released ?

Great. The only other setup I would add is if your machine's wired ethernet is ever disconnected, the default setup for OpenSuse 10.2 is to have the interface up when the cable is plugged. In that case, you cannot ping your host if you use static IP address for wired connection and DHCP for wireless. Open YaST, Network Devices. Highlight the wired interface, and select Edit. Then on the General Tab, change the Device Activation from On Cable Connection to At Boot Time.

If i am not a developer, can I upgrade my ipod touch 4g to ios 5?

I've read that after upgrading ios 5 I need to activate it, but how?

Try here:
iTunes Store reporting error - 3259

Developer question. Upgraded to 6.0 - javascript:window.close() no longer works. Works OK in other browsers. Banners on popup windows also seem confusing.

Popup windows no longer close using javascript:window.close(). Have to click the "X" to close the popup.

I was able to fix the issue here. Steps Taken: From the comand line I ran
dscl /Search read /Users/jdoe HomeDirectory
It returned # No such key: HomeDirectory
This was the big clue.... it should have returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I unbound the Mac from AD and ran the following command in terminal.
dscacheutil -flushcache
I then went into OS X sharing preferences and renamed the computer slightly, so it would create a new computer record in AD. I rebound the machine to AD making sure in Directory Utility Advanced, under User Experience that Force local home directory on start up disk was unchecked and Network protocol to be used was AFP.
I then ran
dscl /Search read /Users/jdoe HomeDirectory
and it returned
HomeDirectory: <home_dir><url>afp://files.hihllc.lan/Users/jdoe</url><path>/</path></home_dir>
I had the user reboot... which was necessary. When he logged in HomeSync fired up. He had quite a few conflicts, so I told him to select use files on this computer for all conflicts.
I checked the FileSyncAgent.logs and it was good.
Let me know if this fixes your issue.
Thanks,
Ray

Need: Oracle Developer Suite patchset p4960210_10122_WINNT.zip

Hello,
Can someone please send me the following patch set p4960210_10122_WINNT.zip
Apologies if it is against forums rules but it is almost impossible to find/download as I don't have an oracle CSI.
Kr
Irefan

Duplicate - Re: Need Oracle Develper Suite patch set p4960210_10122_WINNT.zip

Developer patchset 17

Hi
My architecture:
11.5.9 CU2 with 9.2.0.8 database [single node on Solaris sparc 64 bit-10
currently iam upgrading Developer 6i patchset 12 to 17 as per doc ID 232313.1
first I have applied the patchset 17 patch 4183804 and checked version not changed.
When exactly version will change?
I need to apply additional patches then Apps Interop Patch [4138754] then version will change?
Please suggest
Thanks
Shaik

currently iam upgrading Developer 6i patchset 12 to 17 as per doc ID 232313.1
If you are following this doc, then you should be upgrading to Developer 6i Patch 19
For previous developer patchsets, please see (Information on Previous Versions of Developer 6i Patchsets [ID 232313.1]).
first I have applied the patchset 17 patch 4183804 and checked version not changed.
How did you check the version? Please see this thread -- how to find the developer version
When exactly version will change?
When you complete all the steps in the doc.
I need to apply additional patches then Apps Interop Patch [4138754] then version will change?
When you apply Patch 17 (or Patch 19 which is the latest).
Thanks,
Hussein

Developer patchset

Hi,
I am just trying to figure out what is the current developer patchset my current instance is on (11.5.10 on windows)
From the help menu in forms, i figured out that the version is 6.0.8.24.1 ie on patchset 15.
According to the note Note:232313.1, the corresponding patch is 3935987
But i am not able to find this neither in ad_bugs or ad_applied_patches.
I am i missing something ?
Thx.

You can also look at the Maintenance Pack instructions for your release (or rapid install version) to see what shipped with your release. For both 11.5.10 and 11.5.10.2 rapid install versions, it appears to be Developer 6i patchset 15 as you deduced.
Release 11.5.10 Maintenance Pack Installation Instructions
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=259484.1
Oracle Applications Release 11.5.10.2 Maintenance Pack Installation Instructions
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=316365.1
Not sure why 3935987 doesn't appear in your ad_bugs. You probably should consider upgrading to Developer 6i patchset 18. It has been required since January 2007 CPU.
Upgrading Developer 6i with Oracle Applications 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=125767.1
Oracle E-Business Suite Critical Patch Update Note January 2007
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402670.1

Developer 6i patchset upgradation

Similar Messages

Maybe you are looking for