Developer 8.1 to Full 8.1

My other half has a Lumia 1020 running the latest 8.0 software. She is very jealous of the 8.1 software on my 630.
She is registered as a Developer and is considering updating her 1029 to the developer spec version of 8.1. Our question is, can she update again to the "full" versions of 8.1 once it comes out in the UK and is available on her carrier, or are any future updates restricted to developer versions only?
Many thanks for any suggestions,
James
Solved!
Go to Solution.

Just to clarify a couple of general points:
1. Networks do NOT "put out" updates - they only approve them and updates are then distributed via the MS servers as usual.
2. Installing the 8.1 developer preview does void your warranty as per THIS user's experience - though if you are able to revert to WP 8.0 (using the Nokia Software Recovery Tool) prior to submitting your handset to Nokia Care you should be OK.

Similar Messages

Difference between developer workplace and full blown portal

Hello,
Can anybody tell me what the difference is between the developer workplace and a full blown portal?
Thanks,
Elmar

Last time I checked, there was no functional difference between the two portal environments - the Developer Workplace, however, must run on Windows, whereas with a generic portal install you can install it on either Windows, or one of the various Unix variants. The only reason for this restriction is that the Dev Studio has some Windows DLLs that will not work under Unix (although some people have made the Dev Studio mostly work under Unix, this is an unsupported configuration and is therefore not recommended).
You may also get some extra 'developer-specific' content in the DWP installation that you won't get as part of a generic installation. That's not to say you couldn't get the content after the fact, and install it on the generic portal install.
We don't use the Dev Workplace, since our PC desktops are quite restricted, and constantly scanned (in other words, performance is horrible). We have Unix environments that run multiple portal developer instances (one per developer) - we just point our Dev Studio at those environments and deploy there.

Need HELP to learn OAF development

Hi,
I am an experienced oracle financials developer. Most of my experience has been on using Developer 6i tools to develop front end and reports. Now I am planning to learn OAF framework to develop or to make customizations to the modules like iprocurement,iStore etc.
I would like to know what is the best way to start the learning process?
Is it possible to learn/practice the OAF framework(from oracle applications perspective) on my personal machine( it has oracle 10g personal edition installed), with out having access to oracle applications instance?
I would like to know if there are any good books/tutorials on OAF usage in Oracle applications?
Please let me know.
-Thanks in Advance,
Satya

I would like to know what level of oracle application access do we need to practice the OAF development ?
You need full access, including sysadmin responsibility.Do we need to have access to instance in terms of unix servers or just access to the applications is good enough?
It would be good to have Unix access , for deploying pages , classes etc.Do we need to create any new responisbilities to practice OAF concepts?
Not required, but a better option.What resposibilities or what level of access do we need to have on oracle application instance to practice OAF concepts?
It is better to have a unrestricted access.Thanks
Tapash

How Can I Learn To Develop Flash Games For Under $50.00 USD?

I am completely new to anything Flash. I have never written a
single line of Actionscript. I don't know the difference between
Flash and Flex. I don't know in what forums Flash developers hang
out. I don't even know what kind of coffee they drink, or if they
drink tea instead.
However, I have developed games and have been thinking about
developing some casual games and have heard rumors that Adobe is
"pushing" causal game development with Actionscript 3 and their
latest releases. So I went to adobe.com expecting to see a link for
something like "learn how to develop games in flash" or some such.
I poked around the developer related pages and didn't find anything
I thought useful.
What I did find were plenty of stuff for *existing* flash
developers. Links to articles and HowTos for specific topics and
information about products that cost a minimum of several hundred
dollars. I can't learn how to develop games and create a prototype
with a 30-day trial, and I am not going to buy a $1000 pro-grade
tool when I am an indie developer without a budget or a pre-funded
project that would justify such expenditures.
I have seen some open source stuff, but don't know if it can
do anything more than build some annoying shaking banner ads.
So let me introduce myself as a possible use-case for Adobe
Marketing and the Flash (Game) Developer community.
I am an educated experience software developer who has a day
job doing "enterprise" software stuff. I want to *play* in my free
time (evenings and weekends) with "Flash Stuff" and learn enough to
be able to build a simple game that I can put on my personal
website and have my friends download. I am not a student, so I
can't get student discounts. The money I have goes toward
toys^H^H^H^H tools for my other coding habits^H^H^H^H^H projects. I
am not interested in 30-day trials, as I may go 45-days or more
between the first and second weekends I get to play with this. I
know OOP so I want to start out learning how to do the "advanced"
stuff from day one and not have to start with dragging and dropping
PNGs w/o any coding and then "relearn" how to do it in code so I
can do anything beyond having the image appear and rotate.
I *am* willing to put time into this endeavor, but only after
I have a few things spoon-fed to me by "advocates" who's job is to
get me "hooked" and willing to invest my time to go beyond Hello
World. At the same time I am download and playing with GarageGames,
TGE/TGB, Game Maker, Dark Basic, Blitz Basic, etc. and many
complete development environments that are full-featured and
completely free if I limit myself to releasing only freeware games,
or cost me less than $50 for the "professional" version with all
the bells and whistles.
I have heard rumors and rumblings about some open source
tools being available and Adobe maybe open sourcing some of their
previously pay-to-play tools, but also understand that Adobe can
probably provide a better "comprehensive" package of tools,
documentation, tutorials, and support, *if I can find the right
place to ask/start.*
And, most of all, I don't know where to start my search as I
have no personal contacts to bug about stuff like this.
So, where can I find the big red button to push and get
everything I want handed to me on a silver-platter.
[please understand I have written this with some attempt at
self-mocking humor and am not some clueless n00b]
Thank you for taking the time to read my lengthy posting. I
hope to find some helpful replies and start down an interesting
learning path.
--Chaim

Just saw your post. Better late than never. You may want to
consider GameBrix.com, where you can create Flash based, casual
games using your web browser. No downloads are required. You can
create a game from scratch using a library of images, sounds and
game mechanics. You can also upload your own. The online script
editor will allow you to view and edit the ActionScripts associated
with each game mechanic. In short, a great way to ramp up on game
design and build your own game without investing a lot of $
upfront.
BTW I am associated with GameBrix so any feedback is
appreciated.

How to install downloaded Oracle Forms Developer/Services 6i Release 2 for linux

Hi folks,
I downloaded d2k6irelease2.tar (Oracle Forms Developer/Services 6i Release
2 for linux) from
http://otn.oracle.com/software/products/forms/htdocs/linuxsoft.html
I untar the file on my linux machine however the extracted files don't
seem to contain any installing program. I didn't find products.jar in the
files and there are no script to install the software. I read the attached
doc, however it only assumes that the installation is from CD-ROM. The doc
doesn't help anything for this downloaded software. I wonder if anyone
here know how to install it. Thank you so much.
Best regards,
Kai Huang

There should be a text based installer in the /orainst sub-
directory
In that directory, just run the script:
./orainst
The installer seems to require libXm.a, which wasn't included in
my RH 7.1 installation, so I had to install the motif-
development libraries before the full install would complete
successfully.

PDF Generator failing on Azure Website but not development machine

I am using EVOPDF for testing html to pdf.
http://idealpi.azurewebsites.net/defaultpdf.aspx
On local development works fine in full trust. When run on Azure website Reserved mode with full trust in web.config I get error.
Could not get conversion result header. Data receive error. Could not receive
data. Error code: 109
A similar post on discounet.asp site
http://community.discountasp.net/showthread.php?t=14232
indicates this is a full trust issue, but I have full trust defined in web.config
<configuration><system.web> <trust level="Full" />
Is full trust not full trust? Is there another way to define Full Trust?
Greg
PS
The EO company responsed with the following
For scalability and stability reasons, EO.Pdf performs the actual conversion in a separate worker process instead of inside your Web application process. That is probably what’s failing in your environment since in a Web only environment it usually won’t
allow you to spawn your own worker process.
Any workarounds using WAWS?

I have solved problem, with large files (~150 pages).
My Evo to Pdf version is 5.17 under 64bits process (iis 7.5) .
Making this change in web.config works ok
  <security>
      <requestFiltering>
        <requestLimits maxAllowedContentLength="1000000000"/> 
      </requestFiltering>
    </security>
Regards,
Jose Antonio.

SQL Developer connect to RAC12c (Basic) failed with ORA-01017 invalid username/password; logon denied

I'm using scan in hostname to connect as Basic that failed ORA-01017. I'm using the same credential system to logon from sqlplus and is fine.
Any ideas?

Essentially all you have said is: help me, I have a problem.
1. full version of sql developer being used
2. full version of Java SDK being used
3. full version of JDBC jar file being used
4. full details on the connection information being used
5. full version of the Oracle client being used
6. confirm that both your sql*plus and sql developer connections were made from the SAME machine
A Basic connection uses the thin driver while sql*plus is using OCI

How to user ORACLE as username in SQL Developer

Hi,
I am new to sql developer. Could you please tell me how do I connect as "ORACLE" user in SQL developer?
I have full privileges using sys & oracle. I tried using sql as sysdba too but it is not accepting it in spite of providing correct password.

>
When I tried connecting to the database as " username - sys as sysdba" in spite of providing correct password, it says, logon denied, incorrect username/password. The oracle database version is 10.2.0.4 & sql developer is 3.5.
>
Are you sure you are using Oracle's sql developer?
This is the official product page
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
IT shows the current latest version is 3.1.07.42 so Oracle doesn't have a version 3.5 yet.
And the official product does not have a " username - sys as sysdba" selection anywhere that I can find. There is a role selection dropdown that includes a SYSDBA choice.
So you provided information that can't possibly be correct and you did not respond to any of the questions that I asked other than DB version.
If you want help you need to provide SPECIFIC information about what steps you have taken and what results you got.
What steps did you take, specifically, to create a user called "ORACLE"? What user was used to create the "ORACLE" user? What grants (roles & privileges) were granted to the user named "ORACLE"?
As for me, since you are not willing to provide information about the other questions that were ask I can't help you so I wish you luck.

Installing SharePoint 2013 with SQL Server 2012 Developer Edition

Hi,
Can we use SQL Server 2012 Developer edition with SharePoint 2013? One thing that came to my mind was setting max degree of parallelism, is that supported in Developer edition? Looking forward to your assistance here.
Thanks,
kashif

I'm slightly incorrect. See http://download.microsoft.com/download/6/4/A/64A1EC8F-F575-41E1-9D34-821FA9F98F8E/SQL_Server_2012_Licensing_Reference_Guide.pdf.
Licensing SQL Server for Non-production Use
The SQL Server 2012 Developer Edition is a full-function version of the SQL Server software—with all the
features and capabilities of the Enterprise edition—licensed under the Developer Tools model, which is a “per
user” model. One license is required for each person that accesses or uses the software.
When using SQL Server software for development, test or demonstration purposes, only the users are licensed
and there is no need for a corresponding license for the actual server systems running SQL Server software in
this case.
As long as only licensed users have access to the software, customers can install as many copies of the software
on any number of servers that are used exclusively for development, test or demonstration purposes. This
is significant, because it allows customers to run the software on multiple devices (for testing purposes, for
example) without having to license each non-production server system.
But no, as you can see above, you'll have no issues with the software (Developer Edition is Enterprise Edition with licensing restrictions, but no functionality restrictions).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

OracleAS TopLink 10g (10.0.3) Developer Preview 2 - NOW AVAILABLE

Earlier this week we upgraded the 10.0.3 Developer Preview. The full set of functionality is documented in the release notes available on the preview landing page(http://otn.oracle.com/products/ias/toplink/preview/index.html).
The functionality added in this refresh of the preview includes:
- OC4J CMP Support
- CTS 1.4 compliance
-Support for hot/re-deployment of TopLink enabled CMP applications
- Bean Pessimistic Locking - Have any of your beans locked on the database as you access them in a TX
- Read-only entity beans are now supported
- Enhanced integration with OracleAS for DMS capturing of performance statistics
- Object-XML mapping enhanced:
- Document Preservation - keep your un-mapped XML from being lost in the translation
- JAXB Compiler - Generate an object model from schema with TopLink MW project
- EIS/JCA mapping enhanced. Access your non-relational data source through OracleAQ or MQ Series
- Object-Relational Enhancements
- Value return from write - Use triggers to assign and return your PK or other calculated values on INSERT or UPDATE
- Isolated Session Cache - Use TopLink to map your VPD/OLS managed tables
- Conversion support for oracle.sql.TIMESTAMP & TIMSTAMPTZ
- Generic history support - With versioning columns you can perform queries for past points in time using the HistoricalSession
- Stored Function Support - Invoke your favourite stored function in the Oracle DB
- Configurable query timeout support
- Enhanced and re-organized examples. See examples link from preview landing page
Additionally we have also added several new how-to docs that can also be accessed from the preview link above.
If you encounter any issues with the preview please post them to this forum.
Cheers,
Doug Clarke
Principal Product Manager
OracleAS TopLink

Sorry about the link above. Try:
http://otn.oracle.com/products/ias/toplink/preview/index.html
Doug

Install Weblogic 12c zip for developement on Windows 7

I have downloaded wls1211_dev.zip for development purpose (instead of full install using windows installer), for installing on the windows 7 (64 bit). After extracting the zip contents, I set up the environment variables for JAVA_HOME, MW_HOME and JAVA_VENDOR as stated in the readme.txt included in the zip distribution. I also made sure to set the environment variables using 8.3 names (old DOS names) by using dir /x command. Here are the environmental settings:
E:\WLS12c>echo %JAVA_HOME%
C:\PROGRA~1\Java\JDK17~1.0_0\bin
E:\WLS12c>echo %MW_HOME%
E:\WLS12c
E:\WLS12c>echo %JAVA_VENDOR%
Sun
But every time I run configure.cmd, I get the following error:
(I checked the permissions on the directory where I have unzipped and it is full control for me (not an administrator user). I tried to run the configure.cmd using administrative user but the same result). I can also navigate to the directories using 8.3 names. I am able to create delete and update files and folder in the target directories as non-administrative user. I have no idea why I should be getting the following errors.
WebLogic Server 12c (12.1.1.0) Zip Configuration
MW_HOME: E:\WLS12c
JAVA_HOME: C:\PROGRA~1\Java\JDK17~1.0_0\bin
783 jar files are being unpacked.
Please wait, title bar will show progress ...
The system cannot find the path specified.
-- above line repeated I guess 783 times
"ACLs are being setup for E:\WLS12c Please wait..."
The system cannot find the path specified.
The WebLogic Server wasn't found in directory E:\WLS12c\wlserver\server.
Please edit the setWLSEnv.cmd script so that the WL_HOME
variable points to the WebLogic installation directory.
Your environment has not been set.
The system cannot find the path specified.
I will appreciate your help in this regard.
Thanks in advance
Salman

Hi,
This issue usually occurs when you install WebLogic Server using generic jar installer and when launching installation with incorrect JDK version.It may be improper JDK installation or incorrect JAVA HOME setup at OS level.
To resolve this issue, uninstall current WebLogic installation using generic.jar installer that is referring incorrect JDK and relaunch the installation with correct JDK by setting correct JAVA HOME system variables. Below are steps to be followed to address this issue.
Un-install WebLogic from your machine.
If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
Run the installer as follows:
Open a command prompt
Change directory to \JDK_64\bin folder and execute:
java.exe -jar -Xms1024m server1001_generic.jar
After the installation is completed you can proceed to safely run the Configuration Wizard (config.cmd)
Regards,
Kal

Performance of Sun's J2EE1.4

Hi all,
I'm currently building a prototype on the Sun J2EE Server 1.4 to use some of the new features in the 1.4 to solve a problem that's currently a bottleneck in our current 1.3 solution.
I wonder if you have some impressions about the performance of Sun's J2EE1.4 compared to JBoss 3.2.x or Weblogic 8.1.
It really doesn't have to be as fast as the others, but if it's 10x slower, I'm in trouble as we want a 10x improvement in performance with the new solution. (Of course, if Sun's J2EE impl. is 10x slower than the others and I still achieve 10x improvement just sit back and wait until JBoss 4.0 is out! :0)
Any opinions/observations/impressions?
-regards,
Gerard.

Hi Binod,
Currently we are using a clumsy legacy implementation to go to an external system that is synchronized everywhere and for everything.
I'm trying to replace this interface by a connector (see the relation with my other posts :-) and my plan is to take advantage of the connection pooling and re-use offered by the container. (Now a TCP connection/bean is created). The communication with the external (real time) system is async bi-directional (formely solved by bridging the incoming msg to JMS), hence my need for a JCA 1.5 connector.
My question regarding the AppServer performance is in general terms. I remember the J2EE1.3 RI being very slow when compared to Weblogic, but given that Sun is proposing the 1.4 RI as the developer edition of the full-fledged J2EE server, I expect it will do much better in this regard.
Kind regards,
Gerard.

Not able to see the crystal reports XI version in the IE 7 and IE 8

Hi Team,
I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the red X image top left cornor.
I am using CrystalActiveX viewer11 version for viewing the reports.
In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
Thanks and Regards
Eshwar

Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
Our web application code also configured in the IIS at same level.
When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
waiting for your reply.
Regards
Eshwar

Got error when deploying app to sharepoint online dev site

Got the error below
'Install app for SharePoint': Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
The App seems to be working just fine, just got this error whatever app i tried to deploy, even a simple sample app

Make sure you openmed Visual Studio as "Run as administrator". And you are deploying to SharePoint 2013 developer site and having full rights on it.

Configure File Type Associations at startup everytime

Whenever I startup SQL Developer (1.5), the Configure File Type Associations opens up. No matter what I do, that window always displays when I first start SQL Developer.
My guess is that the information that this window is trying to save is being written somewhere that I don't have access to. I'm running on a machine that is locked down with very little permissions (I can't install any software). Obviously this information is not stored where the other settings are stored (\Documents and Settings\<your_user>\Application Data\SQL Developer) because I have full permisions to this folder.
Anyone else experiencing this behavior?
Thanks,
Rich

Hello everyone. I'm new to this site and I'm looking to find out where the "Configure File Type Associations" are stored in SQL Developer 1.5.1.54.40. I am running SQL Developer as a published application via CItrix, so my user community is locked down from many things, however, as full access to their profiles. Are these file associations stored in the registry? If so, does anyone know which key(s) store these settings? My users are very annoyed that they have to re-select their file associations every time they run SQL Dev from the pub app server. Any information would be greatly appreciated.

Developer 8.1 to Full 8.1

Similar Messages

Maybe you are looking for