Developer's password to access to the Vision database
We have installed 11i on MS windows with the Vision database for
test purpose. We defined and assigned the access to a functional
end user and developer. The functional access is good, however
the developer access is not working. My question is: What is the
developer's password for Vision database, any additional setup
in the environment? Pls give detail steps for defining the
developer function and/or environment, or any other procedures.
Thanks lot.
Please try your set of books in the general ledger and let me know if it is responding. I have set up my calendar, chart of accounts and currency but I could not define the set of books. Click define and see if it is responding or not.
Thanks
[email protected]
Similar Messages
-
Where is the password for access to the MyPHP Admin logon used?
Iam a newbie to development of a .php application, so I have been using lots of tutorials and help from this forum. I used David Powers' tutorial on installing and using XAMPP, and eventually had everything working on my desktop, and in preview. I am using a pre-defined database (of user and password) that I create in MySQL to determine which page to display to a user. After doing all of my development work, I upload to my remote server and immediately got errors when trying to validate the login. Contact with my host informs me that my data base on the server is protected by a user name and password of their definition. I was given this info 3 years ago when I first started using them, but I'd long since lost that e-mail.
I've now got a situation where my database has one id and password, and my site is requiring another. I believe that I should have had my site's info before setting up the MyPHP Admin. At this point, should I re-load MyPHP Admin and use the id and password from my host?If i understood you well, the php script can't connect to the database, right?
You need to match the access data in the php script, with the user and password from the database.
So, first:
If you are running your site in a hosting with CPanel, you can create the database and the user to that database without entering in phpMyAdmin
Then, you need to change the username, database name and password in your php script, to match the real values (in your webhosting)
That information is stored in /Connections/YourDBConnection.php
If you need to get inside phpMyAdmin, contact your hosting provider for a solution, like a password reset. With that password, you can do the step 1 inside from phpMyAdmin (in case you haven't CPanel on your webhosting). And after that, change the values in /Connections/YourDBConnection.php to match them.
Cheers! -
SQL Server 2012 and guest access to the MSDB database
Hello!
Today we were given a vulnerability scan on one of our SQL Server 2012 systems and it is flagging the following issue:
Guest is not disabled on the msdb database.
I pointed our security team to the following article:
https://support.microsoft.com/en-us/kb/2539091
My question on this:
Other than the three cases outlined, are there other possible implications of disabling guest on the msdb database? Can you point me to a reference that states one way or the other if guest needs to be disabled on msdb?
I do not like the thought of applying this change blindly and I am afraid of a potential issue caused in some other part of our application that we cannot account for down the road.
Any info would be much appreciated.
Thanks!
-Bill S.Hello,
Possible issues when SQL logins try to connect to a database.
https://connect.microsoft.com/SQLServer/feedback/details/559791/if-you-disable-guest-user-in-msdb-it-causes-issues-with-a-sql-login-sql-2008
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
like I can with dropbox
You're comparing apples and oranges.
Dropbox is a "cloud" application that allows you to share files or folders of files with others.
Adobe Reader is a "reader" application that lets you view a PDF file.
Why are you trying to stop people from viewing a PDF in Reader? What's your workflow? -
Setup cannot grant the domain\computer$ account access to the DPM database ID: 832
I'm having an issue getting DPM 2012 to install using a remote database. The remote sql server is Windows 2008 R2 with SQL 2008 R2. The DPM server and the database server are not DC's either. I have tried everything I can think of from granting permissions
to both windows and SQL, rechecking my installation of SQL, checking the application and system logs on both servers and even going through the error log for the DPM installation. No matter what I do I seem to get the same error and it has now been 3 days
without me having a backup. Can someone please help me out? The information on this error seems to be pretty scarce and I am no longer sure what to do besides calling Microsoft for help.Using your naming convention, I pasted my log for the same. It seems to throw an exception right after deleting the group.
[2/22/2013 10:48:10 AM] Information : Adding local group DPMDBAdministrators$DPM3 on server SQLR2
[2/22/2013 10:48:10 AM] Information : Deleting local group DPMDBAdministrators$DPM3on server SQLR2
[2/22/2013 10:48:10 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.DeleteLocalGroup(String serverName, String localGroupName)
at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.SecurityConfigurationHandler.AddLocalGroup(String serverName, String localGroupName)
*** Mojito error was: DpmSetupConfigurationError; 2220; WindowsAPI
[2/22/2013 10:48:10 AM] Information : Add user: CONTOSO\administrator to local group: DPMDBAdministrators$DPM3on server: SQLR2
[2/22/2013 10:48:10 AM] Information : Adding local group MSDPMTrustedUsers on server DPM3
[2/22/2013 10:48:10 AM] Information : Deleting local group MSDPMTrustedUsers on server DPM3
[2/22/2013 10:48:10 AM] * Exception : Ignoring the following exception intentionally => An error occurred while trying to configure DPM.Uninstall DPM by using Add or Remove Programs in Control Panel, and then run DPM Setup again.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException' was thrown.
SORRY - Just realized I commented with another logon. -
My Ipod is locked since my daughter tried too many times trying to put the password. Now it says " iPod is disabled" connect to iTunes, but when I connect to iTunes it says "Please enter the password to access"
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Invalid username and password when accessing ovi.....
i have a problem when trying to sign in to ovi on my phone, it says e mail and password invalid even though this is not the case. i can sign in to ovi on the laptop and my husbands E71 using same information. Does anyone know a solution to this........ its driving me up the wall!!!!
This question was asked before. I gave them the solution but they didn't take my advice.
When entering the user name and password to access Ovi, the phone adds a blank character at the end of the user name and/or the password, and the site interpretes them as invalid. If you, after entering the info, erase the last blank character by using the delete button of the keyboard and then click "enter" no problems will remain.
It happened to me too, therefore I know it so well.
mgoksoy -
Can I password protect access to Time Machine??
Hey guys ..
Ive just switched over from PC to mac. So far Im loving it and doubt Ill ever use a PC again.
I do have a question about Time Machine though. Is there a way to password protect access to the Time Machine interface ?
Cheers
DarrenCan't help with the TM stuff, since I don't use it, and will leave that discussion to macwiz1220; however, since you're new to Macs, once you sort out your issue, see these:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacFixIt Tutorials,
MacTips, and
Switching to the Mac: The Missing Manual, Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac. -
VISION Database INTERNAL password
I am installing the VISION database for training purposes but do not know the password for the INTERAL account.
Any help would be greatly appreciated.
thanksBefore changing it, the password for the INTERAL account is ORACLE.
null -
How do you authorize access to itunes while blocking the access of the rest of the computer?
How do you authorize access to itunes while blocking the access of the rest of the computer? I want to do a party and let people have access to the music but I don't want them to look in my files. I have windows 7.
I cannot log off and let the music play. Ideally I would want to have a password for access to the rest of the computer.
Thank you!The following may help with the file sharing issues: OS X Mavericks: Share your files
-
Can you set a single FILEGROUP to READONLY without getting exclusive access to the entire DB?
I'm in the process of building a partitioned table with a sliding-window partition. I have several years of historical static image data that will be moved to individual filegroups created to hold year's worth of data each. The Business
requires that the last 60 days of images be updateable, everything older needs to be readonly which simplifies the backup process.
Since the PRIMARY filegroup is always READWRITE, I'm going to use the PRIMARY filegroup for the upper range of my partition to allow users to make necessary modifications to images in this 60 day window. On a nightly basis, I'm going to run
a process that changes the upper range on the partition to the daterange = (getdate() - 60). The 61st day moves seamlessly from PRIMARY filegroup to my 2013FileGroup in milliseconds.
The process runs almost flawlessly, however, I'd like to change the FILEGROUP to READ-ONLY after moving the data to the archive partition. In my process, I can quickly switch this archive filegroup to READWRITE and run the Partition MERGE \ SPLIT to
change my upper range and move records between partitions. However, I cannot change the FILEGROUP back to READ_ONLY without getting exclusive access to the entire database to save the change.
Is there any way to set a single FILEGROUP to read-only quickly without setting the entire DB to SINGLE-USER with ROLLBACK IMMEDIATE? I've tried the WITH ROLLBACK IMMEDIATE on the ALTER DB statement to modify the filegroup without any success.
I need WRITE access for a matter of seconds before setting it back to read only. Any help would be greatly appreciated.
I'm dealing with a TB of data, a full restore could take 60+ hours to recover the entire db. However, doing partial backups on the READWRITE portion of the DB is done quickly and I can get the business back online quickly by recovering the
PRIMARY filegroup and then restore readonly filegroups in the background. If I can't change these filegroups to read-only on the fly, I may have to maintain more backups for extended periods of time and may need to wait for maintenance windows to set
filegroups to READONLY.Is there any way to set a single FILEGROUP to read-only quickly without setting the entire DB to SINGLE-USER with ROLLBACK IMMEDIATE? I've tried the WITH ROLLBACK IMMEDIATE on the ALTER DB statement to modify the filegroup without any success.
I need WRITE access for a matter of seconds before setting it back to read only. Any help would be greatly appreciated.
I am moving it to Tools. Consider setting up a separate database for the 60+ days data.
Related thread:
USE TempDB
GO
ALTER DATABASE SampleDb
MODIFY FILEGROUP [Archive] READONLY
GO
The following error appears:
Msg 5070, Level 16, State 2, Line 1
Database state cannot be changed while other users are using the database 'SampleDB'http://www.sqlservercentral.com/Forums/Topic1328084-391-1.aspx
Kalman Toth Database & OLAP Architect
sqlusa.com
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
Using Oracle 11gR1 OID to control access to 11gR2 RAC database ?
I have a two 11gR2 RAC Node database that I would like to implement Oracle 11gR1 OID to manage all access to the RAC database.
Should I install and configure Oracle 11gR1 OID into the same RAC database to control access to the RAC database? Is this the appropriate approach?
Please share your ideas... I couldn't make it to Openword to ask this type of question.Hi,
I think there is some confusion here. OID doesnt protect your database. All OID is doing is taking the authentication of the user and authorization (privileges) of the user to OID and out of the database. This way you can centralize the management of all user accounts in one place and not worry about it in the database. This is helpful only if you have many databases. If you have a very small number of databases and small number of user accounts, then OID is not really buying you anything. The best practices is published in the oracle docs. Just that you have to read a lot to figure it all out. Here are some info from our installation.
1. weblogic and oid application is installed on a application server
2. Repository database is a independant database (not shared with other apps) in a shared RAC cluster.
3. Replication (OID application replication) setup between a primary oid server and a secondary oid server in the DR site
4. Load balancer configured to point to the primary server and if primary server is not available, point the connection to secondary server
5. DIP configured to pull all users and groups from active directory
6. Password filter installed on all DC's to capture passwords and ship it to oid.
7. Users creation, modification,deletion, expiry, etc., is all controlled on active directory.
8. Database registered with OID for user authentication and authorization
For protecting you data, you will need to use additional security methods/products like :
1. Database vault (to prevent privileged users from operating on the data)
2. Database auditing
3. Fine-grained access control
4. table level policies
5. Fine-grained auditing (column level)
6. Audit vault (to consolidate all audit records to a central place for auditors to classify and research each audit event)
7. operational/process to enforce security.
Good luck :-).
Regards,
Shaji. -
9i Vision Database Installation
I am attempting to install the 9i Vision Database via the rapid installer on the Windows 2003 server platform. The Vision Database for Windows requires sthe cc, link, which, and gnumake commands. I have installed the MKS Tools 8.5 for Developers. As I work through the installation, a checkutil.cmd script runs and errors out becuase it is not able to find these commands. The MKS Tools also puts the necessary entries into the path variable. How do I correct this, or is there another set of utilities I must install? Any help on this issue would be greatly appreciated.
Thanks,
SteveThanks. I have installed the cgywin and it has included the make command. The Oracle installation is specifically asking for the gnumake which as far as I can tell does not exist. All of the various vendors including GNU has the make command named "make". Am I supposed to rename the file?
Thanks,
Steve -
Provide developer a username and password to access the weblogic
Hi,
we have a weblogic server with a domain name soa_domain and a managed server instance name soa_server1.
we have 5 developer working. Our aim is to give each developer a username and password to access the weblogic for developing and deploying the applications so that they will not be able to access or tamper other developers work.
how to accomplish this in weblogic 11g
Thanks in Advance
user3560574GO to Security Realms > myrealm > Users n Groups > Create a new user (say 'developer') > Click on 'developer' user > Click on Groups > Make it a member of the groups you want your developer to be depending on what kind of previledges you want to give them.
-Faisal
http://www.weblogic-wonders.com -
I have an apple developer account to make a new app, but I need to give access to the designer without sharing my payment info or allowing him to have access to my icloud, apps or itunes account. There is some way to have another password?
The designer is usually someone who just handles the user interface portion of the code. The developer would handle core functionality. I assumed you were the developer and the designer was the designer. You are the client and your "designer" is the developer.
Ideally, you should create a business account so that you can add someone to your team. That is the way it is supposed to work. Otherwise, you will have to ask for the final source code so that you can build and submit the app yourself. You should always have the source code regardless. You should always perform the submission under your own account too. Otherwise, it is the developer's app, not yours.
Sharing accounts is against the Apple Developer agreement anyway. The App Store Gold Rush is over. Now it is mostly zombie apps and competing fraudsters. You don't want to give someone access to your iTunes account. You really don't want to give someone access to your bank account either.
The best solution would be to convert your account to a business account. You may be able to have the developer submit the app and then transfer it to you.
Maybe you are looking for
-
Is it at all possible to connect an external HD to a time capsule into the USB port
I am trying to connect an external drive into USB port of a time capsule to increase capacity. How does one get this done?
-
Business partner. Hide bookmarks
The Business partner exists in role "Sold-To party". How I can exclude from visibility of some tabs (bookmarks): For example - 'Status', 'Documents', 'Pharmaceuticals', 'Long texts' and others. Or necessary to use technology BDT? Thanks a lot.
-
My Ipod won't transfer purchases.
My Ipod won't transfer purchases. I've tried all of the options to do so, but I click it and it doesn't do anything
-
What FTP servers can I use and what is the URL of it. Help me! Due on Wed.
I want to up load my website but I do not know what FTP server to use. I find a FTP server but not know what's the URL.
-
Vaildating typed data for a search help
Hi Experts, I have a scenario wherein i have a field which is attached to a dictionary search help, when i type some value in this field without using F4 how should i validate the value, Is it automatically done by the dictionary search help.. Anuj G