Developer Server and Linux

A
null

Nigel Underwood (guest) wrote:
: A question for the Forms Development team really...is there a
: plan to release Developer Server for Linux. It will be great
if
: you do....
: Nigel.
It's coming, the port will be done after the 6i release which
will happen early in 2000.
-- Developer PM Team --
null

Similar Messages

Developer Server and Oracle 7.3

Need to know if an Oracle 7.3, Developer 2.1 and Developer
Server configuration is reasonable for putting forms/reports on
the web, or if we should go to Oracle 8i. Are there any unusual
problems that we should be watching out for? Thanks in advance
for your assistance.
null

We have developed several form apps using the products in
question. We have experianced minor GUI problems but many of
these had patches. You can check by going to: ftp://oracle-
ftp.oracle.com/dev_tools/patchsets/dev2k/Win95NT/2.1/
I never experianced the scroll-bar problem the first response
talks about, not saying it isn't possible. Possibly a different
database platform.
All in all we have had good luck with the applications, little
bit of a setup learning curve, but once we were up and running
we produced some very effective web applications.
Susan (guest) wrote:
: Need to know if an Oracle 7.3, Developer 2.1 and Developer
: Server configuration is reasonable for putting forms/reports
on
: the web, or if we should go to Oracle 8i. Are there any
unusual
: problems that we should be watching out for? Thanks in
advance
: for your assistance.
null

Installing Windows Server and Linux on a hyper-v

Scott Alan Miller wrote:
But we have lots of Windows too.
That allow the sunlight into your office?! :)

Are you allowed to install Linux in a hyper-v on the same hardware as a Windows server? Also, would there be any issues to crop up? I am curious because I want to put Windows Server 2012 on one VM, Exchange on another VM, and then a Linux Server on another VM all on the same physical hardware. Windows Server 2012 Hyper-V would be hosting them all. The reason for the Linux Server is to use it for anti-virus or spam etc. and Linux is a free OS. I am curious though how it will jive with a Windows domain as well as being on the same machine as a hosted VM.
This topic first appeared in the Spiceworks Community

Windows DHCP Server and Linux DHCP Relay Agent

We are trying to organize a VLAN (say VLAN 1) for guests who must be assigned IP addresses from a DHCP server in a different VLAN (VLAN 2). This DHCP server is configured with two scopes - 172.16.0.0/24 (for VLAN 2) and 172.16.4.0/24 (for the Guests
VLAN 1). The DHCP server successfully distributes addresses to clients in its VLAN (it has the IP address 172.16.0.2). For the clients in the other VLAN a DHCP Relay Agent has been setup on the router. It is DHCRELAY running on Linux (CentOS) which has
been configured to accept the DHCPDISCOVER broadcasts coming on the VLAN1 interface of the router and forward these to the DHCP server. The IP address of the VLAN1 interface of the router is 172.16.4.254 and on the VLAN2 interface - 172.16.0.254
The problem is that the DHCP server won't respond with a DHCPOFFER message to the relay agent. I have traced the frames on the router and on the DHCP server. They arrive on the DHCP server with the correct GIADDR of the relay agent. According to all documentation,
if a scope has been configured on the DHCP server and it receives a unicast message with the GIADDR set by a relay agent that matches one of the configured scopes, the DHCP server must send a unicast DHCPOFFER to the relay agent. But it doesn't.
Here is what Wireshark reports (ignore the Destination port unreachable messages, the DHCP service was stopped at the time Wireshark was running)
When the service is running, there are just DHCPDISCOVERs - no OFFER. You can see that the server has the two scopes configured:
The relay agent seems to work normally - it forwards the DHCPDISCOVERs to the server continuously (tried many times with ipconfig /renew on the client).
I read many posts about this problem. Some users had other services running on the DHCP server that used the DHCP port, but I don't have such an issue (you see that when the service is stopped, an ICMP port unreachable is sent which is correct). Others however
did not find a solution. Am I missing something? Is there something specific when using the DHCRELAY agent from DHCPD? Can I turn on some verbose logging to track this down? Thanks in advance.

WIth DHCP, there is really nothing to configure. If the Relay Agent/IP Helper is pointing to it, and the VLAN subnet exactly matches the scope subnet, then it should just work.
What I've seen in the VLAN config is either a static route back to the subnet the DHCP server itself is sitting on is not configured or incorrectly configured, or there are ports blocked (need UDP, too, since that's what DHCP uses to pass the OFFER), and
other necessary ports are opened, then it should just work.
Sometimes NIC teaming on the DHCP server will cause it. Not sure. Microsoft doesn't support teaming prior to Windwos 2012, but it doesn't mean that it doesn't work. Don't get me wrong, teaming works nicely, but they just don't support it because they never
certified the drivers, that's all.
The issues I've seen with DHCP relays and VLANs in the forums are usually based on misconfigs in the VLAN or ports blocked. Sometimes we'll refer to call Microsoft Support for specific, hands-on assistance. And searching the threads, from what
I've found that if they did call support, they've never posted back what the problem was based on or the resolution. I can post a couple of them for you to read through, but there were never any response with the actual resolution.
If you like, you also have the option to contact Microsoft Support. Here's a list of phone numbers if you choose this option:
http://support.microsoft.com/contactus/
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Can BW develop server and BW test server use one server?

Hi,expert.
Our company has bought one computer, we want use it for BW developing machine and BW testing machine, Can we realize it?
TKS in advance.

Yes you can use the single server for developements and testing.
Your land scape will be (DEV&QA) -
> PRODCUTION.
Bruce don't post the same query
Edited by: prashanthk on Oct 14, 2010 6:57 PM

Airport Print Serving and Linux

I have a small ethernet wired network with three macs and one PC running Ubuntu linux. The printer for the network is hanging off an Airport-Express in my network closet. All the macs print fine but I need to be able to print from the linux box as well. As such, I need to know what protocol that apple uses to support the print server function. Or, I need some advice on setting it up with an SMB protocol. Any information would be greatly appreciated.
Matt

Hi,
Sorry for delaying in reply.
Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
Documents sent from windows clients show same but they've document name and page count.
SPL archive copied from spooler printer on Windows server shows that info is present too:
%!PS-Adobe-3.0
%%Creator: cairo 1.9.5 (http://cairographics.org)
%%CreationDate: Thu Jun 19 14:15:48 2014
%%DocumentData: Clean7Bit
%%LanguageLevel: 2
%%DocumentMedia: Letter 612 792 0 () ()
%%Orientation: Portrait
%%For: (testuser)
%%Title: (Phaser 5500 Descarga del archivo)
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginFeature: *JobPatchFile 1
% Default Definitions
userdict /xerox$pagedevice <<
/MediaClass null
/MediaPosition null
/PageSize [612 792]
/TraySwitch true
/ManualFeed false
/ImagingBBox null
/ProcessColorModel /DeviceGray
/DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
/PostRenderingEnhance false
/Install {
xerox$old_install xerox$flip {
currentpagedevice /PageSize get aload pop translate 180 rotate
} if
>> put
<--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 612 792
%%EOF
Linux client used official PPD file downloaded from xerox webpage for linux
cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
Render print jobs on client computers as suggested by Alan before.
Any other idea?

Vendor master Creation in Development Server and Production Server - ASAP

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hello everyone,
I just want to know that how to transfer the vendor accounts or vendor master data from dev client to Prod client?
Vendor accounts are already in the dev client, created mannually, any one please guide me how to transfer these vendor accounts in the prod server, without the USE OF LSMW.
Please Reply ASAP
Thanks
M

Hi
Your understanding is correct.
Development -
> Quality
Move TRs from Development to Quality till the time it is working as expected by business / comitted to business....
Development -
> Production
Once the results in Quality (post UAT) are satisfactory, move the TRs from development to Production....
Good Luck !!!!
Kumarpal Jain.

ANM server and Linux (Security) Updates, which must I deny?

Hello!
Tha ANM installs some special RPMs into server. Can I update the OS with RedHat update or yum and accept all updates?
Kai

Kai-
For the OVA based ANM, you have no kernal access. For the RedHat based install, as long as the update does not mess up the sql database, or restrict any of the calls ANM uses, it wouldn't hurt it.
Regards,
Chris Higgins

Dev 6.0 forms server and 8i

One server with NT 4.0 SP5 running Oracle 8i (8.1.5.0.5) and Dev 6.0 (6.0.5.32) installed in seperate oracle homes. I configured tnsnames correctly and created a very simple form that connects to the DB and displayes two fields. Form runs fine in client/server form runtime mode. Setup a client with IE5 microsoft VM (5.0.0.3240) and security configured so I can run the javasoft examples. I started the Forms server as a service running as a domain admin. When I try to run the form using static (not a cartridge) config it connects to my static.htm file and downloads some java stuff and then says applet initialized and displayes the blue logo for Oracle Developer Server and then stops, no form??? So my first question is: this config is supported right? Then what am I doing wrong? I initially installed Dev. 6.0 using the wrong installer (the one on the distribution), but then installed again (ontop of current config, I couldn'e un-install) and patched it to 6.0.5.32 and as I said the forms run in Client/Server mode fine. How do I debug the forms server??? I don't get any error messages.

I got it!
After reading numerous postings I discovered that I needed to unzip the class.zip files and store them in the java directory, but thanks anyway.

Steps to export and import oracle 10g databse from AIX to AIX and LINUX

Hi,
I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
Please give me all the steps as this is my first exort an import activity.
thanks,

For 10g there exist two ways to do so.
1) Regular exp/imp.
2) Data pump expdp/impdp.
As this is your first export and import activity, relevant concept understanding is mandatory for you.
Documentation Link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck.

ORA-01722 on Production Server (without errors on Development Server)

Development Server: Oracle 9.2
Production Server: Oracle 10.2
I execute a procedure on Development Server and its executed OK but If I execute the procedure on Production Server I receive the error when I want to insert a number field in a table:
ORA-01722: invalid NUMBER. ORA-02063: preceding line FROM DBLINK_RAC
ORA-01722: invalid NUMBER
I have identified the problem. The problem is the decimal separator. If in Production Server I open the file and Replace , with . the procedure runs OK.
BUT I HAVE THE SAME CONTROL PANEL CONFIGURATION ON DEVELOPMENT AND PRODUCTION SERVER, AND I HAVE THE SAME ORACLE NLS PARAMETERS CONFIGURATION TOO.
WHY DOESNT THE PROCEDURE RUN OK ON PRODUCTION SERVER??????????
Thanks in advance!

Hi, I have executed the SELECT * FROM v$nls_session_parameters query on both server and the results are the same!!!! (I attach it)
Warren Tolentino ask: < is your procedure loading a data from an external file?>
Answer: Yes the procedure reads an external file with utl_file and then It makes an Insert of each line.
I dont understant what do you want to say with it might be that your development and production data are not in sync..
The procedure is the same!!!! Both have the same code!!!
Do you know What happens?????
Thanks in advance!
PARAMETER               DEV_SERVER     PROD_SERVER
NLS_LANGUAGE               AMERICAN          AMERICAN
NLS_TERRITORY               AMERICA          AMERICA
NLS_CURRENCY               $               $
NLS_ISO_CURRENCY          AMERICA          AMERICA
NLS_NUMERIC_CHARACTERS          .,               .,
NLS_CALENDAR               GREGORIAN          GREGORIAN
NLS_DATE_FORMAT               DD-MON-RR          DD-MON-RR
NLS_DATE_LANGUAGE          AMERICAN          AMERICAN
NLS_SORT                    BINARY          BINARY
NLS_TIME_FORMAT               HH.MI.SSXFF AM     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT          DD-MON-RR HH...     DD-MON-RR HH...
NLS_TIME_TZ_FORMAT          HH.MI.SSXFF...     HH.MI.SSXFF...
NLS_TIMESTAMP_TZ_FORMAT          DD-MON-RR HH...     DD-MON-RR HH...
NLS_DUAL_CURRENCY          $               $
NLS_COMP                    BINARY          BINARY
NLS_LENGTH_SEMANTICS          BYTE               BYTE
NLS_NCHAR_CONV_EXCP          FALSE          FALSE

Oracle developer server

Hi all
I have Configured Oracle developer server and using IIS as Web server.
I am not able to launch Reports on the web.
I am able to launch Reports as HTML file.
Can anyone tell me how to launch RDF or REP file.
thanx in advance
Priya
null

First, the r30cgi32 file must be in your CGI directory. Copy it there and try
http://yourservername/cgi-bin/r30cgi32/showenv ( use the name of the cgi directory instead )
This should display report server environment info.
Second, make sure the location of your rdf or rep file is included in the REPORTS30_PATH variable (listed by the previous command ). If so, try
http://yourservername/cgi-bin/r30cgi32?batch=yes&destype=cache&server=....&userid=.../...@...&REPORT=......rdf&param1=...&.....
I have myself problem when referencing .REP files, using the reports server - .RDF files work OK. The message is "Can not read from Report Builder message file" or similar. Any ideas, folks?
null

Developer server

Just want to make sure I understand the Free CF 8 Developer
edition.
The free CF 8 Developer edition can be on a Development
server but it can only have 2 client workstations (at one time)
connecting to it or is it 2 workstations maximum connecting to it?
And since its free development software it does not come with a
license??
I was hoping to get free Developer CF 8 Developer server and
have 20 workstations use it for development but it doesnt seem like
that is allowed?

Florida wrote:
> I was hoping to get free Developer CF 8 Developer server
and have 20
> workstations use it for development but it doesnt seem
like that is allowed?
no that's against the dev license & physically impossible
as the dev box will
only talk to the first 2 IPs that connect to it until the cf
server service is
re-started. you can however simply install the cf dev server
on your 20 w/s &
use it's built-in web server for development.

Running php scripts on development server

Hi,
I have Coldfusion development server and Apache running on my local host. CF is on port 8500 and Apache is running on port 80.
On my remote host in plesk I can add support for Coldfusion and PHP, is there a way to run PHP files on localhost:8500?
Thanks

Sweet. I run this setup on Mac 10.5.7 and it's great (PHP & CFML on port 80, that is).
The easiest solution is to reinstall CF as a multi-server and run the connectors for Apache. The most recent CF (8.0.1) Mac installer is 'built' for Leopard, so it works well.
Mark Drew has a good post:
http://www.markdrew.co.uk/blog/post.cfm/running-coldfusion-8-on-leopard
Aaron West also has an excellent post on CF 8 & Leopard:
http://www.trajiklyhip.com/blog/index.cfm/2008/1/14/ColdFusion-8-Apache-22x-and-OS-X-105-L eopard
If you run into a snag, PM me & I can help more (I've freaking installed this $%&@ thing so many times )!

Sos: deploying developer forms on linux ----- urgent!!!!!

have a problem in deploying developer forms on linux.
how do i do that?
urgent!!!!!!!!!!!!!!!!!!!!!!!

You must compile a form under Linux.
To do that, you must have Developer/Server for Linux. After installing it, in $ORACLE_HOME/bin there will be a compiler - f60genm

Developer Server and Linux

Similar Messages

Maybe you are looking for