Developer site not working?

I have been trying to download the SDK for the past 3 - 4 hours but every time I try and login I get the following error message: "We are processing your request. Please wait a few moments then refresh this page". Anyone else have the same problem?

Yes, it is probably getting hammered right now with requests.

Similar Messages

IPhone developer site not working.

Ive been trying to download the SDK for iPhone for two hours now. The site fails at the redirect.html site. And the developer site fails to load images and what not. Is it a bandwidth problem they are having? Is there another site i can download this at.
Message was edited by: waverider303

The site at this time may just be busy with traffic. Try again during lesser peak hours. Like 12 to 3 am time frame.
Or if needed try on another PC or another Browser. But I am guessing it is just heavy on traffic with everyone attempting to visit it and download

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

Download software site not working for Financial Data Quality

Hi
Financial data quality management site download site not working. it's showing error message below error message.
Error message: "We're sorry,the page you requested was not found.We have recorded this error (404) to help us fix the problem"
Site: http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
regards
Anil

Hi Ferro;
As far as I can see Apple doesn't have to fix anything with Software Update because it is working perfectly for myself and the users I help to support.
So maybe if you can give us more details; such as what error messages are you getting, what have you done so far to solve this problem.
Allan

FDM download site not working

Hello
FDM download site not working for 11.1.1.3 version
http://www.oracle.com/technetwork/middleware/bi-foundation/downloads/hyperion-fin-data-quality-111130-085525.html
From
Sarilla

I wonder what are we supposed to understand from this?
Is JSF still there?

Flash player download web site not working

After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

Hi eidnolb,
My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
Date: Wed, 14 Apr 2010 10:01:33 -0600
Subject: Flash Player flash player download web site not working
Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
With that information, I'll be able to give you instructions and the links you need.
Thanks,
eidnolb
>

I have creative cloud but Lightroom 5 develop does not work. What do I need to do to get it working

I have creative cloud but Lightroom 5 develop does not work. What do I need to do to get it working?

If lightroom downloaded and installed without any errors, you will get better help with program questions in the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/lightroom

Adobe Muse site not working in Google Chrome

Hi Guys, my adobe muse website www.focaldesigns.ie is not working in Google Chrome, i was advised to publish it again which I tried twice with no joy. Any help on how i can get the site back working in Chrome and on an iPad would be greatly appreciated. Thanks a mil, Claire

Hi Gaurav, thank you for taking the time to check this out for me. I appreciate it.
I've figured out If you open it in Chrome on a larger that 15" screen the site will open yet for some reason when I open it in Chrome it recognizes it as tablet and http://focaldesigns.ie/tablet/index.html appears in the tab bar -
I've tried re publishing the site in Muse and updated Chrome updates yet it is still not opening on a 15inch mac in Google Chrome, it is opening in other internet browsers perfectly. Any ideas?
Look forward to hearing form you.
Thanks Again.
Claire

ASA-5505 Site-to-Site Not Working

I am somewhat new to Cisco but to do have some experience. I am trying to connect two ASA 5505's together via site-to-site VPN. They are configured with public IPs and all other services are working. I have used the VPN wizard on both boxes successfully but the tunnels are not working. The two devices are on the Comcast network. Any help would be appreacited.
Site A: ASA 5505 w/50 User license
Site B: ASA 5505 w/10 User license
Site A Config:
ASA Version 8.2(5)
hostname *********************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.XXX.XXX 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username user1 password tTq7bIZ.C4x0j.qv encrypted privilege 15
username ********* password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: end
Site B:
ASA Version 8.2(5)
hostname ***************
enable password 6.De4e7UzES9wBPg encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.100.10 Web_Server
name 10.0.6.0 Ghost_Flower_Inside
name 10.0.5.0 San_Mateo_Inside
name 10.0.5.100 Any_Connect_100
name 10.0.5.101 Any_Connect_101
name 10.0.5.102 Any_Connect_102
name 10.0.5.103 Any_Connect_103
name 10.0.5.104 Any_Connect_104
name 10.0.5.105 Any_Connect_105
name 10.0.5.106 Any_Connect_106
name 10.0.5.107 Any_Connect_107
name 10.0.5.108 Any_Connect_108
name 10.0.5.109 Any_Connect_109
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 12
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.5.201 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 173.10.XXX.XXX 255.255.255.252
interface Vlan12
no forward interface Vlan1
nameif dmz
security-level 50
ip address 192.168.100.1 255.255.255.0
ftp mode passive
dns domain-lookup outside
dns server-group DefaultDNS
name-server 75.75.75.75
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group network Any_Connect_DHCP
network-object host Any_Connect_100
network-object host Any_Connect_101
network-object host Any_Connect_102
network-object host Any_Connect_103
network-object host Any_Connect_104
network-object host Any_Connect_105
network-object host Any_Connect_106
network-object host Any_Connect_107
network-object host Any_Connect_108
network-object host Any_Connect_109
access-list outside_access_in extended permit tcp any interface outside eq www
access-list outside_access_in extended permit tcp any interface outside eq ssh
access-list outside_1_cryptomap extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
access-list inside_nat0_outbound extended permit ip object-group Any_Connect_DHCP any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool AnyConnectDHCPPool Any_Connect_100-10.0.5.110 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (dmz) 1 192.168.100.2 netmask 255.255.255.255
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) tcp interface www Web_Server www netmask 255.255.255.255
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 173.10.242.182 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
http 10.0.1.0 255.255.255.0 inside
http 10.1.10.0 255.255.255.0 outside
http San_Mateo_Inside 255.255.255.255 inside
http San_Mateo_Inside 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_1_cryptomap
crypto map outside_map 1 set peer 173.12.XXX.XXX
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
vpn-sessiondb max-webvpn-session-limit 10
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.0.1.0 255.255.255.0 inside
ssh San_Mateo_Inside 255.255.255.0 inside
ssh 10.1.10.0 255.255.255.0 outside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 5
console timeout 0
dhcpd auto_config outside
dhcpd address 10.0.5.10-10.0.5.30 inside
dhcpd dns 75.75.75.75 75.75.76.76 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 1 regex "Intel Mac OS X"
svc profiles CATS disk0:/cats.xml
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 75.75.75.75
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
webvpn
svc profiles value CATS
username ************** password sPxon1E6hTszm7Ko encrypted privilege 15
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:1751532c3624a6c2eec3c1ae0c31fe03
: end

Hi Kevin,
Both the sides have IP address of 173.10.XXX.XXX on the respective Outside interfaces and you have configured the peers for 173.12.X.X.
Please ensure the correct IP addresses for VPN peers are configured , via the following command:
crypto map outside_map 1 set peer X.X.X.X
e.g. If you have 173.10.X.X on Site X and 173.12.X.X on Site Y , then
On Site X, peer would be
crypto map outside_map 1 set peer 173.12.X.X
and the tunnel-group will be
tunnel-group 173.12.XXX.XXX type ipsec-l2l
tunnel-group 173.12.XXX.XXX ipsec-attributes
pre-shared-key *****
On Site Y, peer would be
crypto map outside_map 1 set peer 173.10.X.X
and the tunnel-group will be
tunnel-group 173.10.XXX.XXX type ipsec-l2l
tunnel-group 173.10.XXX.XXX ipsec-attributes
pre-shared-key *****
Also , the nat exempt would be complimentary on each other i.e.
On Site X,
access-list inside_nat0_outbound extended permit ip San_Mateo_Inside 255.255.255.0 Ghost_Flower_Inside 255.255.255.0
On Site Y,
access-list inside_nat0_outbound extended permit ip Ghost_Flower_Inside 255.255.255.0 San_Mateo_Inside 255.255.255.0
Hope that helps.
Regards,
Dinesh Moudgil

Sql Developer Launcher Not Working In Linux

Hello,
System Details:
Fedora 19
Sql Developer Version: Version 4.0.0.12
Java Version: OpenJDK 1.7.0-40
I can launch Sql Developer from the command line successfully.
/opt/sqldeveloper/sqldeveloper.sh
But when I attempt to use the launcher icon, I receive a SIGSEGV error. Here is the top of the hs_error.log file.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x000000317a062e00, pid=7680, tid=140636646749952
# JRE version: OpenJDK Runtime Environment (7.0_40-b60) (build 1.7.0_40-mockbuild_2013_10_02_16_56-b00)
# Java VM: OpenJDK 64-Bit Server VM (24.0-b56 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C 0x000000317a062e00
The ~/.sqldeveloper/jdk file contains the following:
/usr/lib/jvm/java-1.7.0-openjdk-1.7.0.60-2.4.2.7.fc19.x86_64
And my /usr/share/applications/sqldeveloper.desktop file contains the following:
[Desktop Entry]
Encoding=UTF-8
Name=SQL Developer
Comment=Oracle SQL Developer
Icon=/opt/sqldeveloper/icon.png
Exec=/opt/sqldeveloper/sqldeveloper.sh
Terminal=true
Type=Application
Categories=GNOME;Oracle;
I'm just switching from Ubuntu to Fedora so this has not worked in the past.
Thank you for any help,
Ann

The solution in https://forums.oracle.com/thread/2594033 worked. I added the 2nd line below to /opt/sqldeveloper/sqldeveloper.sh.
#!/bin/bash
unset -v GNOME_DESKTOP_SESSION_ID
cd "`dirname $0`"/sqldeveloper/bin && bash sqldeveloper $*
Previously, I incorrectly updated ~/.bashrc to unset GNOME_DESKTOP_SESSION_ID. That's why running Sql Developer from the command line worked, but not from the launcher.
Thanks su.

Creative Cloud Muse Sites Not Working HELP!!!!!

I have a lot of sites in Adobe Business Catalyst and with in the last 45 min, any sites that are not uploaded through an FTP no longer work. When you google the web addresses google just says "Oops! Google Chrome could not connect to ____________". I need these sites to be up and working ASAP please help!!!! If I can even get the site to load, it just crams everything in the top lefthand corner. The sites look like trash at the moment so I had to put up blocker pages to keep people from being able to get into the site for right now. If anyone knows whats going on please help ASAP! Also if I try and log into business catalyst to figure out whats going on I get the same "Oops!" message from google. The sites are not working in any other browsers ether.

You will likely get better program help in a program forum Help with using Adobe Muse CC
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

My SQL Developer is not working correctly! help

hello!!
My problem here is not like I can't live or work but it is REALLY annoying, see my SQL Developer is not taking any key different from letters and the space bar, I mean, if I use the enter key, doesn't change the line, if i use the backspace key doesn't erase if I use F5/F9 doesn't execute the query(s)!!!! and so the arrow keys don't work!!!
any ideas why is that happening? and if so howcan i fix it?

There is a well known but still unresolved bug causing this kind of behavior, if you are on SQL Developer 1.5.X you can work around the problem by loading default accelerators from:
Tools -> Accelerators -> Load Preset -> Default
If you are on 2.1.X the preset can be loaded from
Tools -> Preferences -> Accelerators -> Other Actions -> Load Keyboard
In 2.1 this problem has not been reported so far, so if you are in 1.5.X you may consider upgrading.

Gasbuddy web site not working properly with firefox, but working fine with explorer

I've noticed when I load the web site gasbuddy.com, it is not working properly. It does load, just not performing like it should. When I try using gasbuddy.com on explorer 9, it works fine. I've already tried working in safe mode and that didn't solve the problem with gasbudy.com. Any suggestions as to how to fix the problem? I did do some prior investigating, and I'm very cautious about removing my cookies. It seems when I do that procedure, I lose too much info on certain web sites----weather.com, weatherunderground, etc. Just not sure how to remove cookies to solve a problem with out causing other problems? Thank you.

I'm glad we were able to figure it out. Many sites are designed with stretchy columns that work with either full zoom or text-only zoom, but definitely not all of them.

Develops Module not working

Hello
I have just loaded LR on Windows 8 and not able to get the Develops Module to work, the adjustmenst such as exposure slider does nothing. the screen goes blank and can see the thumb nail takes adjustment.
Are you able to help.
Thanks Harry

Hello
I have just loaded LR on Windows 8 and not able to get the Develops Module to work, the adjustmenst such as exposure slider does nothing. the screen goes blank and can see the thumb nail takes adjustment.
Are you able to help.
Thanks Harry

Develop module not working since upgrade to 4.2

I've installed the 4.2 upgrade and now the develop module doesn't work anymore. It was working fine on 4.1, 64bit version.
I'm on Windows 7 Pro, with second generation i7 CPU, 16 gig Ram
Please have look at this thread at Photoshop.com were I reported this problem with a lot of details already. So far no help provided.....and that's 4 days ago.
I really need help with this as I cannot work my Photos until this is fixed...or at least a solution to remove system files that are not removed when un-installing, as they bring the problem to a previous version that was working just fine before upgrade to 4.2 ( un-installed 4.2 then re-install 4.1, then 4.1 now has the same problem I have with 4.2) What a mess.......

Thank you both, as this was the lead I needed to follow.....
The profile is the problem...yes,.... and no....
I use X-rite Color Munki as my profiler, latest upgrade, 1.0.2.0
Using the above info, I've switched from my profile to sRGB, to manufacturer profile and others in the list...result : mine has the problem and not any of the others.
I've just spent 7 hours straight, un-installing, re-installing, LR 4.2, 4.1, Color Munki, deleting the content of the LR Preference file, re-profiling using "easy" and "advanced", trying all kinds of combinations and sequences of the above....
My findings:
1- In LR 4.1 Using my profile, and deleting the content of the " Preference" file before starting LR, everything works just fine. Then when you shut it down and re-open it, the problem is back. Using " Task manager", I force the shut down of the " Not responding" LR, go back to deleting the "preference file" content, and LR works again. This does not work with LR 4.2
2- In LR 4.1 On the last re-calibration I've done, I tried again and it did not work. Went to change profile to my default manufacturer's one and as expected LR worked....but I noticed that the calibration profile change did not affect the monitor screen, and LR 4.1 works perfectly on multiple starts and closes.
Here is the interesting part....: My Color Munki profile is still displayed on the monitor, ( I did not "Restart" or "Re-boot" ) and the selected profile is the manufacturer's in Control Panel's Color Management, and LR 4.1 works perfectly.Can it be that the profile itself, displayed on the monitor, is not really the problem?
Is it possible the "Conflict" would be in "Windows Color Management"? or LR's color management protocols?.....
I have not tried # 2 with LR 4.2 as I'm kind of chicken of going another round of hours at it.... Like the saying goes..." If it ain't brokin', don't fix it ".....
So, for now, I'll cary on with 4.1 as I can at least continue working......hopefully, using the "Sleep mode", and not "Shut down", the set-up will maybe stay "as is", and if not, I now know how to fool it.....

Developer site not working?

Similar Messages

Maybe you are looking for