Developer Suit 10g Installation

I am trying to install Developer Suit 10g. My configuration is 1024 MB RAM, 80 GB HDD and AMD Athlon 3400+ processor. The OS is XP Home. Database 10g is already installed and running on the same machine.
In the very begining Universal Installer is giving me this error message, "Invalid staging area. There is no top level components for Windos NT, Windos 2000 available for installation in this staging area."
My question is can I install Developer on XP Home?

select deferent folder and defferent home for developer. by default installer select the home where you have install database. you should change it.

Similar Messages

  • Developer suit 10G installation Guide?

    Hi
    Can any one send me the Developer suit 10G installation Guide if possible step by step?
    Thanks In Advance
    Noman

    http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm

  • Urgent!! Deploy reports for Developer suite 10g (Newbie)

    Hi All,
    I've generated few jsp report using report builder from developer suite 10g. I know in the developer suite 9i. I just copy these jsp files under \reports\j2ee\web. Then start OC4J Instance, and type in from browser as http://localhost:8888/reports/testreport.jsp?userid=username/password@dbconnection. However, it doesn't work for 10g. Is there any different in deploy report for 10g? Please help....
    Thanks,
    Best Regards,

    Andy,
    It's impossible to help us if you doesn't specify what error messages you get?
    If I should take a guess, you're using the wrong port number. Did you check if it's correct before posting your message? Most Developer Suite 10g installations comes with port number 8889.
    Regards,
    Martin Malmstrom

  • Installation of developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    I am guessing that you are fairly new to the Oracle Forms product as you are not understanding the difference between the environment where a "form" is developed and the area where it can/will be run in a supported manner. Let me try to start from the beginning....
    1. The Forms Builder 10.1.2 is NOT_ supported to be installed on Windows 7. I can technically be accomplished but is considered NOT supported by Oracle. So unless you have a good working knowledge of the Developer Suite product and the Win7 operating system and don't care about getting technical support from Oracle, I do not recommend attemting to install on Win7. If you choose to install on Win7, you are on your own even if you have a Support agreement. Supported platforms include Windows 2000, Win-XP, Vista (see note 559067.1), Solaris, Linux
    If you feel like you need to have the Builder installed in an UNSUPPORTED environment, you can probably follow the instructions provided for installing on Vista as they will likely work for Win7. If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1)
    Supported Operating Systems and other installation information can be found in the Installation Guide:
    http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
    The only exception to the above is that we now support installing on Vista when following the note mentioned above.
    2. You can "run" your form after it has been designed and compiled, on a Windows 7 machine. The form will run in a browser, using a JRE/JPI.

  • Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

    Hello.
    I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Error:*** Alert: null ***
    User Selected: Cancel
    Can anybody help me? I am very confused about this error message.
    Thanks very much.
    Petr.

    Are you logged in as an administrator?
    I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

  • Installation of Developer Suite 10g on XP Home Edition

    Dear all,
    I downloaded Develope Suite 10g (9.0.4.0.1) from OTN and tried to install on a notebook with XP Home Edition.
    The installation failed with the error message that the 'C:\Document \<Userid>\Local Settings\Temp folder is either not writable or no sufficient disk space of 55MB.'
    I can manually copy files and folders more than 55MB into the Temp folder. So the problem does not seem to be disk space or writablity.
    I am wondering if software can be installaed on XP Home Edition. Would appreciate any advices.
    Thank you.

    Hello,
    I you have access to Metalink (http://metalink.oracle.com) :
    Certify - Product Version and Other Selections: Oracle Developer Suite On Microsoft Windows XP (x86)
    Windows XP has 2 editions/versions, Professional and Home. Oracle will ONLY certify on Professional.
    Regards

  • Connectivity and Installation Problem in Developer suite 10g

    Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
    1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
    2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
    3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
    4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
    5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
    6. There is no middle tier in this case. Only One server as domain
    and client pcs.
    Please guide me,matter urgent.
    Thanks in advance

    Regarding this point -
    1.
    Then you should be able, for testing purposes, to do the same from other Clients.
    Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
    2.
    For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
    This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
    (We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
    Please explain the steps to proceed .
    thank you

  • Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???  And which one to install first developer suite or database????

    Hello everyone,
    I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
    Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
    IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
    And which one to install first developer suite or database????
    Thanks in advance.

    you should check (before installing) requeriments from documentation.
    Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
    Table 4 Memory Requirements for Oracle Developer Suite Components
    Component
    Memory
    Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
    Minimum: 256 MB
    Recommended: 512 MB
    Oracle Reports Developer
    Minimum: 128 MB
    Recommended: 256 MB
    Oracle Forms Developer
    Minimum: 128 MB
    Recommended: 256 MB
    I usually install first database and later DS, I never tried first DS and later database.

  • Installation developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    Hi this is the Oracle Designer forum, you would be better off on the Forms forum

  • Installation of Developer Suite 10g in Linux

    Hi,
    I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
    Any link for this would help me a lot.
    I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
    linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
    in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
    the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
    the forms and libraries in the same folder.
    Regards,
    Alok Dubey

    First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
    I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
    or any link which u felt that it is very useful, then Please let me know.
    Have you checked if it is registered with DevSuite10g...???How to check this ..
    "I have done some configuration.."
    Which....????
    I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
    compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
    is in the attached library).
    Regards,
    Alok Dubey
    Edited by: user583531 on Oct 23, 2008 4:06 PM

  • Installation of Oracle Developer suite 10g on windows 8

    Can any one Please confirm, if Oracle Developer suite 10g is supported on windows 8 or not? Any types of Documents/materiel in this regard shall be highly appriciable.
    Regards,
    Nahidullah Khan

    It is an unsupported/uncertified combination - so the install may or may not work as expected. If the install completes, there no guarantee that the software will work as expected. Supported/certified OS versions are listed on the Install Guide. Is there a reason you are using this combination ?

  • How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

    Hi,
    I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
    Exiting OUI.
    Can anyone please help me to solve this problem.
    Thanks in advance.
    Regards

    Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

  • Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.  If possible, Kindly provide me the website link.

    Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
    If possible, Kindly provide me the website link.

    Pl do not post duplicates
    Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
    I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
    Continue the discussions in your original threads

  • Problems installing Oracle Developer Suite 10g in windows 7

    Hi Experts;
    I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
    My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and  I couldn't see anything, may be the name is diferent.
    Thanks for your help.
    Al

    First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product.  While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit).  This is a commonly asked question so a search of the forum would have given you several solutions.
    The limitations of the Oracle installer are:
    1.  You must have Administrator rights to install.
    2.  Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
    3.  It's unable to recognize Windows Managed virtual memory.
    To get around these limitations you must do the following:
    1.  Modify your Virtual Memory settings and define a specific Min and Max amount.   Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
    2.  You must run the Oracle installer in compatibility mode for Windows XP.  To do this,
      - Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
    3.  While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
    Now run the Oracle setup.exe and your installation should succeed.
    Craig...

  • Install developer suite 10g on windows 7

    hi to all,
    I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
    thanks
    Silvia

    Silvia,
    Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
    The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

Maybe you are looking for