Developer suite running on windows 7 64 bit.

Will the latest Oracle developer suite (Forms/Reports builder) and OC4J environment run fine on a Windows 7 64 bit operating system?

Hello,
As far as i know Developer Suite 10gR2 is not supported on windows 7. But check the below link. It has been answered earlier. Maybe will be help you.
http://forums.oracle.com/forums/thread.jspa?messageID=4215028&
-Ammad

Similar Messages

  • Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.  If possible, Kindly provide me the website link.

    Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
    If possible, Kindly provide me the website link.

    Pl do not post duplicates
    Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
    I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
    Continue the discussions in your original threads

  • Problems installing Oracle Developer Suite 10g in windows 7

    Hi Experts;
    I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
    My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and  I couldn't see anything, may be the name is diferent.
    Thanks for your help.
    Al

    First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product.  While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit).  This is a commonly asked question so a search of the forum would have given you several solutions.
    The limitations of the Oracle installer are:
    1.  You must have Administrator rights to install.
    2.  Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
    3.  It's unable to recognize Windows Managed virtual memory.
    To get around these limitations you must do the following:
    1.  Modify your Virtual Memory settings and define a specific Min and Max amount.   Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
    2.  You must run the Oracle installer in compatibility mode for Windows XP.  To do this,
      - Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
    3.  While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
    Now run the Oracle setup.exe and your installation should succeed.
    Craig...

  • Installation of an Oracle Developer Suite 10g on Windows XP doesnt work

    Hello.
    I try to instal Oracle Developer Suite 10g on Windows XP. I run setup.exe from DISK1 directory. Universal installer starts and Welcome screen appears. I click "Next" to "Specify file locations" screen. But when I choose Source Path and Destination Name and Path and I click "Next" again, nothing happens. In installation log I can see strange error message. You can see it in part of log bellow:
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'C:\xxx\OracleDevSuit\Disk1\stage\products.jar'. Received the value from the UI page.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'C:\Program Files\oracle\10.2.0\client_1'. Received the value from the UI page.
    Error:*** Alert: null ***
    User Selected: Cancel
    Can anybody help me? I am very confused about this error message.
    Thanks very much.
    Petr.

    Are you logged in as an administrator?
    I wouldn't install in Program Files anyway. I'm not sure, but I have a gut feeling that Oracle doesn't like spaces in file and directory names. Install in C:\Oracle directory.

  • Will Developer 6i run on Windows 7 without any problems?

    Will Developer 6i run on Windows 7 without any problems? and developer 6i supports on windows 7 or not.

    Hi,
    As a matter of fact the Dev 6i tools (form and report builder) is supported and will be supported as they are certified with E-business 11.5.x.x. version....product
    Take a look at :
    "Which Version Of Dev 6i Tools (Reports & Forms Builder) Is Supported With E-Business Suite 11.5" (Metalink Note:418667.1)
    Greetings,
    Sim

  • How to install Oracle Developer Suite 8 on windows 8 64bit

    Hi, everyone.
    I have facing problem. How to install Oracle Developer Suite 10g on windows 8. Please send me step by step install.
    Thanks
    Mbulur.

    No version of Forms/Reports is currently supported on Windows 8. Also, because Error Correction support for versions older than 11 have ended, no new certifications will be provided for those versions. I would recommend you consider upgrading to Forms/Reports 11.1.2.1 as we are hoping for Win8 certifications in the future for this version.

  • How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

    Hi,
    I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
    Exiting OUI.
    Can anyone please help me to solve this problem.
    Thanks in advance.
    Regards

    Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

  • Installation of developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    I am guessing that you are fairly new to the Oracle Forms product as you are not understanding the difference between the environment where a "form" is developed and the area where it can/will be run in a supported manner. Let me try to start from the beginning....
    1. The Forms Builder 10.1.2 is NOT_ supported to be installed on Windows 7. I can technically be accomplished but is considered NOT supported by Oracle. So unless you have a good working knowledge of the Developer Suite product and the Win7 operating system and don't care about getting technical support from Oracle, I do not recommend attemting to install on Win7. If you choose to install on Win7, you are on your own even if you have a Support agreement. Supported platforms include Windows 2000, Win-XP, Vista (see note 559067.1), Solaris, Linux
    If you feel like you need to have the Builder installed in an UNSUPPORTED environment, you can probably follow the instructions provided for installing on Vista as they will likely work for Win7. If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1)
    Supported Operating Systems and other installation information can be found in the Installation Guide:
    http://download.oracle.com/docs/cd/B25016_08/doc/dl/core/B16012_04/chap2.htm#i1007814
    The only exception to the above is that we now support installing on Vista when following the note mentioned above.
    2. You can "run" your form after it has been designed and compiled, on a Windows 7 machine. The form will run in a browser, using a JRE/JPI.

  • Installation developer suit 10g on windows 7 64-bit

    Dear all,
    I have successfully installed oracle 10g and developer suit 10g in my lappy which runs on windows 7 64-bit, I am able to launch form builder, create a new form and compile it. But when I runs the form the the internet explorer 8 crashes.
    Please help

    Hi this is the Oracle Designer forum, you would be better off on the Forms forum

  • Problem installing oracle developer  Suite 10g on window 7 64 bit

    hi am in window 7 64-bit am trying to install my oracle developer suite am geting this error when installing
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 6.1
    Failed <<<<
    Exiting Oracle Universal Installer, log for this session can be found at C:\User
    s\10017134\AppData\Local\Temp\OraInstall2012-09-21_08-15-55AM\installActions2012
    -09-21_08-15-55AM.log
    Please press Enter to exit...
    i downlload the software from
    http://www.oracle.com/technetwork/developer-tools/developer-suite/downloads/101202winsoft-087370.html
    my pc is window 7 professional service pack 1
    64-bit operating system
    now am geting this error
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5.0, 5.1 or 5.2 . Actual 5.1
    Passed
    Checking monitor: must be configured to display at least 256 colors . Actual
    4294967296 Passed
    Checking swap space: 0 MB available, 1535 MB required. Failed <<<<
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation, at which time they will be rechecked.
    Continue? (y/n) [n]
    i try to right click mycomputer->advance system setting->system properties->advance->performance->setting->advance->virtual memory->change->virtual memory
    Edited by: ADF007 on 2012/09/21 9:22 AM
    Edited by: ADF007 on 2012/09/21 9:49 AM
    Edited by: ADF007 on 2012/09/24 12:12 PM

    hi my installation fail am geting this error
    Starting to execute configuration assistants
    Launched configuration assistant 'Oracle Net Configuration Assistant'
    Tool type is: Recommended.
    The command being spawned is: 'C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp'
    Start output from spawned process:
    Parsing command line arguments:
    Parameter "orahome" = C:\DevSuite
    Parameter "orahnam" = DevSuite
    Parameter "responsefile" = C:\DevSuite\network\install\netca_asinstall.rsp
    Done parsing command line arguments.
    The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
    *** Starting OUICA ***
    Oracle Home set to C:\DevSuite
    Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
    Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
    Do you wish to proceed? ***
    User Selected: Cancel
    The OUICA command is launched from C:\DevSuite\oui\bin\ouica.bat.-----------------------------------------------------------------------------
    *** Starting OUICA ***
    Oracle Home set to C:\DevSuite
    Configuration directory is set to C:\DevSuite\cfgtoollogs. All xml files under the directory will be processed
    Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
    Do you wish to proceed? ***
    User Selected: Yes/OK
    End output from spawned process.
    Configuration assistant "Oracle Net Configuration Assistant" was canceled.
    Result code for launching of configuration assistant is: -1
    Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
    User Selected: Yes/OK
    The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
    Execute file C:\DevSuite\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
    echo Oracle Net Configuration Assistant
    C:\DevSuite\jdk\jre\\bin/java.exe -Dsun.java2d.noddraw=true -Duser.dir=C:\DevSuite\bin -classpath ";C:\DevSuite\jdk\jre\\lib\rt.jar;C:\DevSuite\jlib\ldapjclnt10.jar;C:\DevSuite\jlib\ewt3.jar;C:\DevSuite\jlib\ewtcompat-3_3_15.jar;C:\DevSuite\network\jlib\NetCA.jar;C:\DevSuite\network\jlib\netcam.jar;C:\DevSuite\jlib\netcfg.jar;C:\DevSuite\jlib\help4.jar;C:\DevSuite\jlib\jewt4.jar;C:\DevSuite\jlib\oracle_ice.jar;C:\DevSuite\jlib\share.jar;C:\DevSuite\jlib\swingall-1_1_1.jar;C:\DevSuite\jdk\jre\\lib\i18n.jar;C:\DevSuite\jlib\srvmhas.jar;C:\DevSuite\jlib\srvm.jar;C:\DevSuite\network\tools" oracle.net.ca.NetCA /orahome C:\DevSuite /orahnam DevSuite /responseFile C:\DevSuite\network\install\netca_asinstall.rsp
    Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
    C:\Program Files (x86)\Oracle\Inventory\logs\installActions2012-09-21_10-14-35AM.log ***
    Edited by: ADF007 on 2012/09/21 4:52 PM
    Edited by: ADF007 on 2012/09/21 4:52 PM

  • Install developer suite 10g on windows 7

    hi to all,
    I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
    thanks
    Silvia

    Silvia,
    Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
    The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Oracle Developer Suite 10g on Windows 7

    Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?

    This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
    The client application is supported on all versions of Windows (32 or 64 bit).
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Unable to install Oracle Developer Suite 10g on Windows 7

    Hello,
    I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
    Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
    Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
    Any help would be appreciated - thanks in advance.

    The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
    Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
    The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Oracle Developer Suite Run time Error

    Hi am Installed Oracle forms developer suite 10g,9i database and j initiator.. jinit13122..WINDOWS XP..When i running locally Am getting blank screen in internet Explorer...and additional plugins required to display media in this page when i run in firefox..

    When i running locally Am getting blank screen in internet Explorer...and additional plugins required to display media in this page when i run in firefox..What version of IE and Firefox are you using? More than likely, you are dealing with a compatability issue with Jinitiator. Oracle has discontinuted Jinitiator and is no longer supported.
    If you are using IE7 or higher and Firefox 2.0 or higher you will need to configure your installation to use the Sun JRE 1.6.0_16 or higher. Take a look at Oracle 10gR2 Forms Services - Using Sun's Java Plug-in for information on how to modify your formsweb.cfg.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Installation of Oracle Developer suite 10g on windows 8

    Can any one Please confirm, if Oracle Developer suite 10g is supported on windows 8 or not? Any types of Documents/materiel in this regard shall be highly appriciable.
    Regards,
    Nahidullah Khan

    It is an unsupported/uncertified combination - so the install may or may not work as expected. If the install completes, there no guarantee that the software will work as expected. Supported/certified OS versions are listed on the Install Guide. Is there a reason you are using this combination ?

Maybe you are looking for