Developer Suite Software Version List

I frequently need to install older NI software versions and have a library of several years of past NI Developer Suite Discs. Does NI provide a table of all the software versions and on which Developer Suite distribution they can be found?
Solved!
Go to Solution.

dkfire wrote:
rolfk wrote:
Older developer suites contained cards that listed all the software and its version (and the version was in bold if there was a change from the previous developer suite release). I understand that maintinaing such a card, printing it and adding it to the disks may cost a few cents, but at least for the license agreement nobody seems to care about the cost for adding an extra paper in there I could plaster an entire house with them by now.
rolfk: They still do... and you get a "nice" cover with too in every yearly major release.
Hmm, not here! I just get a card board box with a license document and a black fabric map full of DVDs but there is no printed list of software versions. I assumed this is because they decided to save a few pennies, but maybe there is something else going on. It is part of a multi user license, so maybe that is the reason.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Oracle9i Developer Suite software availibility

Hi all.
Please let me know from where can i download "Oracle9i Developer Suite"
I have tried from below link
http://www.oracle.com/technetwork/developer-tools/discoverer/downloads/index-095113.html
getting option "Oracle9i Discoverer Administrator and Discoverer Desktop version 9.0.2 "
When i click on the above link its show only 10.1.2.0.2 Developer Suite software available, 9.0.2 is missing.
With Regards
T.K

Hi;
AFAIK this version is not avaliable at net anymore(You can try your chance by checkin e-delivery).
If this version is a must than for your issue i suggest rise SR or try to connect wiht oracle local office
Regard
Helios

Oracle Developer Suite Latest Version

hiii,,,,
i have oracle 10g Release 2(10.1.2.0.2)version installed in my pc,,& this is the higher version which is available on the net....but i want to download the higher version i.e 10.1.2.1,,,is it available on inter-net???
if yes then plz tel me the link from where i can download this......
thanx

i have oracle 10g Release 2(10.1.2.0.2)version installed in my pc,,& this is the higher version which is available on the net....but i want to download the higher version i.e 10.1.2.1,,,is it available on inter-net???
if yes then plz tel me the link from where i can download this......
hi
u can download 11G but if u want to update the current version
then u need a patch for that and if u have metalink access then u can get patch.
sss

Oracle Developer Suite New Version !!!

hi ,
i heared that Oracle intend to release a new version of Oracle iDS , is that right , and if so what are the new features , does any body know !? , Thanks

No Mark,
I don't think you can access Forms field from JavaScript that way. You will just be able to trigger a WHEN-CUSTOM-JAVASCRIPT-EVENT pl/sql trigger in Forms from JavaScript and you will be able to call JavaScript from pl/sql tigger/program units.
Grant links to my blog article at http://www.oratransplant.nl/2006/06/07/oracles-plans-for-forms-version-11/ that describes most of the new 11g features. Please note that these plans were presented to us in summer 2006 and are subject to change for the final release.
My personal opinion is that this JavaScript API is the best thing that happened to Forms since the move to the web. You can do great things with this API and with a little bit of extra effort you can already get the same functionality in previous releases. See the short screencast at http://www.oratransplant.nl/2007/01/22/flash-movie-showing-forms-and-jsf-integration/ I created to show the potential of this feature. It enables the use of existing Forms as components in newly build web applications.

Application Server or Developer Suite

Hi experts,
What is the difference between Application Server and Developer Suite listed here in http://www.oracle.com/technetwork/developer-tools/forms/downloads/index.html ?
And while learning, if I want to install on my laptop(Windows 7 32-bit), which one is prefered(works) when I have 10g databse installed.
Or do we need to install both Application Server and Developer Suite.

The main difference is in components that comes with installation.
Developer Suite comes with:
Oracle JDeveloper
Oracle Reports
Oracle Forms
Oracle Discoverer
Oracle Designer
Oracle Business Intelligence Beans
Developer Suite Software Configuration Manager
Once you need to Deploy your application to users - you will need Application Server
which includes much more:
Adapters
B2B
Business Rules
Containers for J2EE
Content Management SDK
Developer Tools
Discoverer
Forms
High Availability
HTTP Server
Identity Management
Manageability
Portal
Reports
TopLink
Web Cache

NI Developer Suite 2011 DS2 installation problem

I got 4 cds of NI Developer Suite 2011, version DS2; But when I installed it, it paused after DVD1.
First, I checked many options, such as RT module, FPGA moudle, after DVD1, a message popped up said DVD2 should put in.
I followed the message, put DVD2 in, then the installation procedure puased for 1 hr.
Later, I tried to reinstall the developer suite 2011, I only checked labivew core and meaurement studio 2010, and communicaiton option: labwindows CVI modulation , labwindows CVI spectruam module. This time, after DVD1, it showed DVD3 was needed. When I put DVD3 in, the installation paused too.
I don't know why it is so difficult to install NI developer suite 2011, I need help.

I have found the full developer suite does take a very long time to install (several hours) with the disk swaps, I can only advise patience. If something is going wrong it will generally tell you in no uncertain terms
TD
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

What is internet developer suit (ids)

hi, plz tell me what is ids(internet developer suit ? why and when do we use it ?
thxs

Oracle Developer Suite ( in past it was called Ids)
Oracle Developer Suite is the most complete and integrated development environment, combining the power of application development and business intelligence tools
in a single suite that is based on the latest industry standards. Oracle Developer Suite lets developers quickly build high-quality transactional applications, which can be deployed to multiple channels - including portals, Web services, and wireless devices, and which can be extended with business intelligence capabilities - including ad hoc query and analysis, high-quality Web reporting, and advanced analysis.
Developer Suite Components:
Oracle JDeveloper
Oracle Reports
Oracle Forms
Oracle Discoverer
Oracle Designer
Oracle Business Intelligence Beans
Developer Suite Software Configuration Manager

Which version of oracle developer suit is compatible with windows 7 32 bit

Can somebody plz let me know which version of Oracle Developer suite is compatible with windows 7(32 bit).And plz tell me the link through which i can download this.I want to download this software for making practice of Oracle Forms and Reports by installing it at my PC.
i had downloaded ds_windows_x86_101202_disk1.zip from Oracle's site but while installing it it showing the error msg in the log as-
Using paramFile: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log
Please press Enter to exit...
Please provide me some solution for this---

Oracle Developer Suite (ODS - Forms 10g) 10g R2 (ds_windows_x86_101202_disk1.zip) is not certified on Windows 7, however it will work. Oracle has certified Forms 11g (Fusion Middlware 11g R2) for Windows 7 (32 and 64 bit).
You can make ODS work on Windows 7, but you have to change a few things before installing to make it work.
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.1Failed <<<<>
This is a fairly common bug (not just with Oracle). The Oracle installer was written to check for a specific version of Windows rather than check for a minimum version of Windows.
Fix 1: Right-click the Oracle setup.exe and select Properties and then click the Compatibility tab and select "Run this program in compatibility mode for: Windows XP SP3".
The Oracle installer also is unable to check the amount of Virtual Memory (VM) available when the VM is set to "System Managed."
Fix 2: Open the System Control panel (Start => Control Panel => System OR press Windows Key and Pause Break key). From the System Properties window, click the Advanced tab and click the Settings button under Performance. Change the Virtual Memory settings to 2048mb min and 4096mb max. Then save and restart your computer. See Microsoft - Change the size of virtual memory for more information on changing the VM. (Note; after the installation is complete, you can - and should - change the VM settings back to System Managed.)
Lastely, the Oracle installer is not designed to work with the Windows 7 User Account Control (UAC) functionality.
Fix 3: Right-click Oracle setup.exe and select "Run as Administrator".
Done, now you are ready to run the Forms 10g setup again.
As I mentioned above, Forms 11g is certified with Windows 7 and is also the only supported version available so you might want to skip Forms 10g and go straight to Forms 11g. For this you will need to download and install WebLogic Server (WLS) 10.3.5 and Fusion Middleware (FMw) 11g R2. Install WLS first, but do not run the configuration at the end of the installation. Then install FMw and run the configuration during this installation. Also, you will want to run both installers "As Administrator".
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed though.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Oracle Developer Suite 32 Bit Version 10.1.2.0.2 Configuration issues

Hi,
I have installed Oracle Developer Suite 32 Bit Version 10.1.2.0.2 (Production) on windows xp sp-2 in a standalone machine.
The following Steps i have followed:
1.Oracle Developer Suite Installed
2.FORMS_PATH ,REPORTS_PATH and UI_ICON has been set in both Registry and default.env
My Application Folder setup is as follows :
D:\iAFRES\APPLICATION\FORMS
\MENUS
\REPORTS
\ICONS
Accordingly i have made the registry entries.
After doing all the above activities i am not able to show the icons ,run reports from web
.Please tell me what to do to resolve the issue and provide me the steps/documents for Application Deployment in Oracle 10g Developer Suite for Development purpose.
Thanks
Dhabas

hi
check out the following links.
How to create jar for icons
http://www.oracle.com/technology/products/forms/pdf/10g/frmwebshowdoc_rep.pdf
If its Correct/Helpful Please Mark it.Thanks
sarah
Edited by: S@R@h on Oct 29, 2009 1:23 AM

Oracle have any latest version of (Developer Suite 10g) after that ?

oracle have any latest version of (Developer Suite 10g) after that
it means that oracle have ( Developer 11g ) ??

oracle 11g forms are available or not for (developer )?
Even if you don't get spoonfed the first time please don't doublepost.
cheers

Dual Install of Developer Suite Version

Hi
Is it possible to have a dual install of Oracle developer suites on my workstation
We are upgrading from 9i to 10g and need to provide support for 9i but do work on 10g so it is critical that i have both without them interfering.
Is this possible, for exaple using different oracle Homes
Frazer

We've done this when we upgraded from 10.1 (10gR1) to 10.1.2.0.2 (10gR2) and then to 10.1.2.3.0 (10gR2 Patch set 3) so we could support older versions of our Forms application using 10gR1 while developing the latest version using 10gR2/10gR2PS3.
This works without any problems. However, you should change your local OC4J startup batch files in the developer suite homes and set the corresponding ORACLE_HOME environment variable and add its bin subdirectory to the beginning of the PATH. Otherwise, you'll probably get errors like "Web client version too old".

HT2188 list of software versions for the different iphone models

where can i find a list of software versions for the different iphone models?

Wikipedia has a list of the original and current iOS for each device
http://en.wikipedia.org/wiki/List_of_iOS_devices

Nokia suite does not show latest software version

Today while browzing Nokia site happened to see new phone software version. When I checked through Nokia suite it was showing the software version that was already installed in the phone.
Do anybody else who own a 701 came across this anamoly
If my post has helped you please click the white star on the right
Attachments:
Screen shot 1.png ‏40 KB
Screen shot 2.png ‏538 KB
Screen shot 3.png ‏49 KB

babdi wrote:
The point is most of users use Nokia suite as a safe means of software upgrade.Besides OTA updates cost more money than internet upgrades. Those who dont have 3G will have to wait for hours and keep the phone plugged in to a charger and they cant use the phone till software upgrade is complete.
Nokia should ensure that all upgrades are available simultaneously across all channels and atleast thro' Nokia suite 1st.
The point is most of users use Nokia suite as a safe means of software upgrade. - No, OTA is safer than using Nokia Suite since you do not overwrite the whole firmware but just the upgraded/added bits.
Besides OTA updates cost more money than internet upgrades. - Not if you use Wifi, as recommended for OTA updates
Those who dont have 3G will have to wait for hours and keep the phone plugged in to a charger and they cant use the phone till software upgrade is complete. - So why own a smartphone if you don't have 3G or access to Wifi ? Surely the situation you describe is the minority exception rather than the rule ?
Nokia should ensure that all upgrades are available simultaneously across all channels and atleast thro' Nokia suite 1st. - Now that will be expensive for Nokia and can only lead to more delays if you insist on simultaneous release across all delivery channels.

How to make Oracle Developer Suite use different Oracle client version

Hello,
I have installed Oracle Developer Suite 10g (9.0.4) on Win7 32bit
When I run Oracle Forms or Oracle Reports or any DB tool (like SQL Navigator or PL/SQL Developer) and trying to connect to remote Oracle DB 10g (10.2.0.5.0) I get an error ORA-02248: invalid option for ALTER SESSION.
Then I've installed Oracle Instant Client 10.1.0.4.0 and made DB tools use this client and error was gone, but I still get that error using Forms and Reports.
So my qustion is, can I make Oracle Forms and Reports use any other Oracle Client but that was installed with Oracle Developer Suite? Or any other suggestions are welcome how to fix connection issue in Forms and Reports?
I have read many threads and some suggested to set NLS_LANG. Done that, but it didn't help :(

The better question is why are you trying to use an obsolete Oracle product on such a new OS and expecting it to work properly? Are you also using MS Office 95 on this machine? Attempting to hack a solution is fine if you are just learning to use a product or just playing around. However, I would never recommend attempting to do what you are doing.
Oracle Forms 9.x was desupported years ago, long before Windows 7 was released. Trying to use it in this manner is risky at best and not something that should be done in a professional environment. If you are a student or just home user trying to learn on your own, I would recommend that you use a virtualization product like Oracle Virtual Box and create a vm of an older OS. For example XP, then install on that platform. If you are a licensed user of Win 7 Pro or higher, I believe Microsoft is still giving away (for free) "XP Mode". Details here:
http://www.microsoft.com/windows/virtual-pc/download.aspx

Developer Suite Software Version List

Similar Messages

Maybe you are looking for