Developer Toolbox List Columns

I am using the Developer Toolbox' Dynamic List Wizard to make
a list of photos .These photos are linked to the menu:
The field "menu_linked" of table "photos" has the same number
of the field "id" of the table "content". The Dynamic List Wizard
displays the number of "menu_linked". But instead of numbers it is
much more userfriendly to show the name of the menu, which is the
field "menu_item" of table "content.
How can I make a link from one table to the other? (I am not
sure if this is the right explanation of my problem.. Hopefully
someone understand my problem)
Thanks a lot for any tips!!

ok, maybe this is more clear: I print the "id" field of
"table01" which is for example "16". I want to show the entry with
the number "16" of "table02" but then not the number but the field
"name" of "table02". This would be "Contact" then. And then a whole
repeat region...
I cannot programme with PHP, so you see it's hard for me even
to explain.
Maybe it's more clear when you see the image: The numbers
should display names of the menu to be more userfriendly in the
Back-End:
http://ulla.nl/cmd/table.png

Similar Messages

Can I perform a lookup to verify the value of a variable is contained in another list column?

I am working in Sharepoint Designer and am trying to figure out how I can set a condition in an approval workflow to only complete a task if the value of a variable is contained in another list column. So if I had a list called A with column
A1 and I am working in the approval workflow, I only want the approval to complete if my variable is equal to any value in list A column 1. Otherwise I want to keep the approval task pending. I am very new to sharepoint so any help would be appreciated.
Thank you.

Hi,
You can use the condition "if any value equals value". Please refer below links for reference.
http://office.microsoft.com/en-in/sharepoint-designer-help/workflow-conditions-in-sharepoint-designer-2010-a-quick-reference-guide-HA010376962.aspx
http://www.codeproject.com/Articles/125120/Step-by-Step-Guide-in-Developing-your-own-Workflow
Best Regards,
Pavan Kumar Sapara.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem.
s p kumar

Combine 2 different list columns and showning in 1 column

Hi,
Is it possible to combine columns of 2 different lists and show in one column?
I have a custom list called "Levels" which contain data like "Developer", "Tester". The levels have some training associated. Training is another column.
I have another custom list called "Project", which contain "project name" and also some training for each project. Training is another column.
I have another list in which i have user names which contain the level and project name columns as look up.
I want to show all the trainings attached to the user in another list in a single column.
Example: If user is a developer and part of project A, then column named training should show all the developer training and the project related training.
Note: custom coding is not possible.
How to achieve this?
Thanks

Hi,
For your issue, you can combine 2 different list columns into one cloumn using SharePoint Desinger Workflow with update list item action:
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Developer Toolbox Send-Email

When I click OK to my SMTP email settings on the Developer
Toolbox, the message:
tNG_config.inc.asp cannot be found in local file list,
appears.
What does this mean?
I'm trying to create a connection between a form, a database
and an e-mail message.
Thank You

Günter,
Thank you for your input after spending all day trying to solve it.
Which I havent for the moment I am going to use a work around by either building an intermediate page where the user can confirm and make changes if necessary and send the email from the update trigger.
Or doing away with using the id field auto number as a job number by inserting a new field where I generate the unique number for the job number.
Regards Paul

Developer Toolbox Support

Is this the place to come for Developer Toolbox
Discussion/Support?
thanks!

in the
Adobe Forums List
you´ll find a link to a dedicated "Dreamweaver Developer
Toolbox" forum - it´s below the Dreamweaver forums link

Another Dreamweaver developer toolbox question

Hello all,
I want to have my user login box resize itself to the div
that I am
placing it in.
I am using CSS positioning for my layout and find that when
the browser
is resized to a smaller size the login for will overrun the
div that it
is contained in.
Any ideas on how this could be corrected?
Thanks.
Chris

Adobe® Dreamweaver® Developer Toolbox is a set of Dreamweaver server behaviors and commands for creating dynamic web applications using PHP, Adobe ColdFusion®, and ASP VBScript server scripting technologies. This Dreamweaver extension helps web developers create membership-based websites, as well as content management systems, CRM back-ends, and other web-based solutions without requiring advanced programming knowledge.
If you are an advance developer than go a head this tool will really help you in all your projects.
It has too many features which you can take advantage of. Such as : -
- Rapid application development
- Wizard-like interfaces
- User interface persistence
- Database management
- Dynamic lists and forms for website administration
- Upload files and images
On Web Hosting
- Manage database information in your browser
- Rich Internet applications
- Client-side form validation
- HTML form widgets
- Dynamic Spry datasets
- CSS skins for a custom look
- Fresh interfaces and CSS customizable skins
- Multi-browser compatibility
Reason to buy: -
1. Increase productivity
2. Implement client changes in minutes
3. Visual SQL query generation
4. Create web interfaces for database administration
5. E-mail information you need on form submit
6. Create file upload forms on the fly
7. Implement solid user registration systems
What else you want. I hope this help...

Dreamweaver Developer Toolbox :: Anyone Using This?

Is anyone using the Dreamweaver Developer Toolbox? If you could share your experience with it, I'm considering the extra purchase.
Linda

Adobe® Dreamweaver® Developer Toolbox is a set of Dreamweaver server behaviors and commands for creating dynamic web applications using PHP, Adobe ColdFusion®, and ASP VBScript server scripting technologies. This Dreamweaver extension helps web developers create membership-based websites, as well as content management systems, CRM back-ends, and other web-based solutions without requiring advanced programming knowledge.
If you are an advance developer than go a head this tool will really help you in all your projects.
It has too many features which you can take advantage of. Such as : -
- Rapid application development
- Wizard-like interfaces
- User interface persistence
- Database management
- Dynamic lists and forms for website administration
- Upload files and images
On Web Hosting
- Manage database information in your browser
- Rich Internet applications
- Client-side form validation
- HTML form widgets
- Dynamic Spry datasets
- CSS skins for a custom look
- Fresh interfaces and CSS customizable skins
- Multi-browser compatibility
Reason to buy: -
1. Increase productivity
2. Implement client changes in minutes
3. Visual SQL query generation
4. Create web interfaces for database administration
5. E-mail information you need on form submit
6. Create file upload forms on the fly
7. Implement solid user registration systems
What else you want. I hope this help...

DW Developer Toolbox updates?

Have there been any updates to the Developer toolbox since
it's release? Also, any links where documentation can be found?
Thanks.
Chris

ChrisS wrote:
> Have there been any updates to the Developer toolbox
since it's release? Also, any links where documentation can be
found?
I've not heard of any updates and the ADDT home page lists no
version numbers:
http://www.adobe.com/products/dreamweaver/addt/
ON that page, if you dril ldown into the FAQ section and then
into Pricing and purchasing information, there is a question:
Do you have printed documentation available for purchase?
and the listed answer is:
Printed versions of the documentation will not be available
for purchase. The product documentation is available only as online
documentation and in downloadable PDF format.
However, my searching of the Adobe site doesn't yield any
results that indicate where this online docs or PDF is located.
Perhaps the Help menu in Dreamweaver has an entry when ADDT is
installed.
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Validate list column based on entry from another column

Hi there
I would like to ensure that a value is entered in list column B, if there is a value of 'Yes' in list column A.
I assume this formula is entered in the Validation settings of the list, but cannot work out what is required.
Is it something like? =IF([Col-A]="Yes",IF(LEN([Col-B]<1,TRUE,FALSE),TRUE)
Thanks
Asher
Fast, Cheap, Good. Choose any Two!

Ahh, found a solution:
=IF([Col-A]="Yes",IF([Col-B]<>"",TRUE,FALSE),TRUE)
Now i need to do the same for other fields in the list, and these formulas must go together in the validation settings of the list, which is going to look messy.
If i want to do the same with columns C and D, how would i append this to the formula?
=IF([Col-C]="Yes",IF([Col-D]<>"",TRUE,FALSE),TRUE)
Thanks
Asher
Fast, Cheap, Good. Choose any Two!

Is there a way to know if my Content Type's fields are a Site columns or List columns

I am totally confused about Site columns, list columns and content types. as seems i will have the same column name , sometimes dealt with as site column while the other as list column. for example i created a new Issue tracking list which comes with the
following columns:-
now i realize that the Description column is a list column (not site column) because if i rename the site column named Description, this list column will not get affected, while column such as "Issue status" is a site column because if i rename
the site column named "Issue Status" the column inside the "Issue" content type will get affected. while there are two site columns named Description but none of them are used insidie the "Issue" content type, and the Description
field in the above picture is a list column !!
so can anyone advice from where i can differentiate if a column inside the Issue content type is a site column or is a list column ???
Thanks

Hi John,
Thanks for posting your issue, Kindly browse the below mentioned URL to identify the site columns and Content Type in your Top level site
http://www.kalliance.com/blog/tips-tutorials/microsoft/identifying-site-columns-content-types/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

I want a last update of the extension developer toolbox for dreamweaver cs5.5

I have an older version of developer toolbox that I use with dreamweaver cs3. Where to download a new version for dreamweaver cs5.5

It is discontinued.
<http://www.dmxzone.com/go/16662/adobe-discontinue-dreamweaver-developer-toolbox-addt-updat ed/>
Sorry for the bad news.

Where can I buy Developer Toolbox for DW CS4?

Hi,
After searching the entire web for the software called "Developer Toolbox" and was unable to find it a friend finally informed me that I could order or purchase the software from Adobe. Would you please let how I can obtain a copy of the "Developer Toolbox."
Thanks.

Sorry "WollombiWombat," I want to inform you that soon after posting the message I was able to download “ADDT,” though, I have not yet fully tested this software but I have all confidence that it will do the job/work I got it for. I do not like the so-called “PyroCMS” according to you. I do not think your “PyroCMS” is for me. I have checked it out and came to realization that it will not work at all for me.
If any one need to find out how I was able to download this software from Adobe.com contact me and I will help you. It may state that it is only for the Dreamweaver CS3 update never mind that it also works for Dreamweaver CS4.
Thanks,
Joplateau

Help me : Multifile upload using developer toolbox

hi
i m trying to build a file storage site and i did everything using developer toolbox. and now i stuck up with multifile upload using Development toolbox. please some help how to setup step by step.
Thank you

Make sure you are using the right java card library version (JavaCard and OpenCard version).
Most cards only support jc2.1.2 - in opposite of the emulator which was designed for jc2.2.1.
Jan

XMLExport - Developer Toolbox Problem/Question?

I am using the XMLExport function of developer toolbox but have a problem which I hope someone can help with.
I need to retrieve data from 2 different tables for the XMLExport page that have no relating fields to use in my Spry XML Data Set, although i can add each table and create the Export function when I view the XML it is only showing data from the first table Export function. I had thought of creating 1 sql query to pull the database from both tables but I am at a loss with that as well.
Could someone answer why the XMLExport only sees 1 of the tables, or explain how to use 2 tables, I only want the first record from each of the tables without using any relationship.
I am using .asp and CS3
Regards in advance
Ray

Heya Ray,
I would not use ADDT XML export use THIS - Converting Database queries to XML (scroll to the bottom of the linked page for ASP example) it's easier to customize (two DB tables in one xml file) you can embed CDATA.
Granted this may all be possible through ADDT XML export I just find the linked reference easier to use. I used ADDT XMLExport in the past but went on to use the linked reference later on when I needed a way to embed CDATA into my dynamic XML file for spry.
Hope that helps!

Setup E-mail settings in developer toolbox

i want setup E-mail settings in developer toolbox.
i use google apps for my site mail.
and use easyphp for localhost.
what is my "mail server" and other parameters?
This
question in Google Apps Discussion Group

Try this:
Email server settings (POP and SMTP)
AT&T email server settings are needed if you intend to use an email program (e.g. Outlook) with your AT&T email accounts. The current settings are displayed in the table below. If you only use AT&T Webmail to access your AT&T email accounts, these settings are not needed and you can access your mail by logging in at https://login.yahoo.com/.
If you signed up for a free att.net email account after 6/12/11, you will not be able to use an email program (e.g., Outlook) with your AT&T email account.
Note: AT&T's POP/SMTP settings have recently changed to inbound.att.net and outbound.att.net. However, if you are using the old settings, they will continue to work.
The following mail server settings will work with all AT&T email domains: @ameritech.net, @att.net, @bellsouth.net, @flash.net, @nvbell.net, @pacbell.net, @prodigy.net, @sbcglobal.net, @snet.net, @swbell.net, @wans.net.
Email Program Settings Field:
Enter:
Incoming (POP)
inbound.att.net
Outgoing (SMTP)
outbound.att.net(requires authentication)
Incoming mail server:
POP3
Incoming/Outgoing User Name:
Full AT&T email address, including domain (e.g., [email protected], [email protected])
Incoming mail port #:
995, secure connection (SSL) checked
Outgoing mail port #
465, secure connection (SSL) checked
Note: When updating the secure server settings, check the SSL check box first and then update the port number if necessary.
Message was edited by: Glenn Leblanc BTW: This comes directly from the AT&T help site. Go to help and search Email Server Settings. The reps should have suggested this.

Developer Toolbox List Columns

Similar Messages

Maybe you are looking for