Developing Crystal Report from SAP BEx query

Hi,
I am trying to create an crystal report from SAP BEx query( using MDX driver). I can able to connected to BEx query and got key figures and characterstics, but not able to get calculated key figures into crystal reports.
Would likes to know how to use the calculated key figures used at BEx query level in Crystal Reports? and
Creation of complex parametes in Crystal reports on SAP data.
I really appreciate your quick reply.
Thanks in advance.
VR

Hi,
calculated keyfigures are shown like any other keyfigure in Crystal Reports.
ingo

Similar Messages

Crystal reports - Create Report from SAP Bex Query

I have installed the Crystal reports 2008 for a trial period and the sap integration kit. I have created a new report from a sap query and I am trying to format the report. I would like the columns headings be similar to Bex query - Current Month Jan 2009 which includes the selection parameter of month. I have tried with no sucess. Any help will be appreciated

Ingo
in crystal reports the variables are available in the field explorer. However when I drag the date selection to the report (in design mode) i get the foloowing ?[0I_CALMO], but when I execute the report I don't get any values. I also tried to create a formula but could not access the parameter for month year. Is there documentation on how to do this?
Thanks for your help.

Crystal report from SAP infoset query

Hi All,
I am facing a problem in a crystal report which is based on Infoset query. When I run the report after passing the parameters it gives me an error "Database error occured" "Parameter field value does not exists" "RFC Closed"
But if I run the same Infoset query from SQ01 I am able to run it with same paramenter and it returns many records.
To be very precise I am running the best practice crystal report "Cost Analysis - Planned vs. Actual Order Costs" which is based on infoset query CO_OM_CA_20_Q1.
It throws me error that "Controlling Area does not exists".
Did anyone faced similar problem?
Best Regards,
Chetan

Hi,
log into your SAP ERP system using the SAP GUI and choose in the SAP Menu the following path:
SAP Menu -> Accounting -> Controlling -> Cost Cetner Controlling ->Environment->Set Controlling Area.
Set the desired controlling area for your user there (DO NOT FORGET TO CLICK ON THE DISKETTE ICON) and try again.
Regards,
Stratos

How to bulid a Crystal report based on Bex query as source

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,

Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM

How to delete all the crystal reports from SAP B1 ?

Dear Experts,
I have one problem and I need to Delete all the Crystal PLD's and Crystal Reports from SAP B1.
I can delete a PLD or Report using delete option from Report and layout manager or layout designer.
But I need to select delete option for each PLD and It makes very time.I have some 200 Reports and I need to delete fully.
Is there any possible to multi delete option in SAP B1?
I have searched many but i will not receive proper solution. Any one can explain how to do This?
Thanks ,
Karthikeyan.P
MSBI Developer-Chennai

Dear Karthikeyan,
Manual deletion is actually the most safe way to delete them. If you try update B1 tables directly, you are against SAP support rule.
Thanks,
Gordon

Problem opening Crystal Report from SAP GUI through VPN

Hi Everyone,
I am facing an issue with opening the crystal report from SAP BW Role menu(SAP GUI). The issue is only with the BW Users who are connecting to the Client systems through VPN. All the settings are done perfectly in the Transaction /CRYSTAL/RPTADMIN and SICF for the CE_URL.
For those who are in the client network it works fine. Please see the URLs generated in both the cases,below.
From Client N/W
[http://sapbobj:8080/SAP/jsp/Action_Dispatch/dispatch.jsp?sap_client=100&cmsname=sapbobj:6400&language=EN&sap_sysid=D40&bw_id=4HUFYJ3XBZ7QLP5HIDYPR7PR6&sap-client=100&actionName=SAP_CrystalReport_View&appKind=InfoView&service=%2FInfoViewApp%2Fcommon%2FappService.do&loc=&initialFolderId=null]
Through VPN
[http://sapbwd.abc.com:8100/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4HUPI3I78CG4S4EDH7XSDP736&sap_sysid=(sysid)&sap_client=100&language=EN&sap-client=100]
where "sapbobj" is the BOBJ system and "sapbwd" is the SAP BW Dev box.
For me it seems to be something related to the N/W. Please provide me your valuable inputs to solve this issue.
Thanks in Advance,
Koka M
Edited by: Madan Koka on May 19, 2010 5:18 PM

Hi,
I'm also facing the same issue. when try to open my report the URL doesn;t taking "bw_id".
It is blank for all transported reports.
Any advice..
Thanks,
Jothi

Crystal Report on BW BEx Query via MDX in SAP Portal

Hi!
We need to display a CR in the Portal. The CR is based on a MDx BW Query. To create and display the report is no problem. Even saving back to BW is working fine.
But how do we get this CR displayed in the EP?
Thanks in advance
Jörn

Hi,
Should only the BO SAP Integration Kit iViews / URL iViews be used and are the Crystal Report iViews (http://help.sap.com/saphelp_nw04/helpdata/en/36/d4a94076b63713e10000000a155106/frameset.htm) obsolete?
Yes as the Crystal Report iView are based on an older version
If we export the Crystal reports to SAP BW, is it possible to call them with BEx iViews like the xCelsius reports? (Like with DASHBOARD=<report name> for xCelsius)
From where can we get the Crystal Report ID, if we export them to SAP BW?
You should use the BusinessObjects Integration Kit iView template for Crystal REports and the ID can be retrieved from the CMC
Ingo

Two problmes between Crystal Reports 2008 and Bex Query

Hi Gurus.
I have two problems with Crystal Reports 2008 when It obtains data from a Bex Query (SAP MDX query connection).
1)     I have defined some Parameters Fields using the follow options:
Type: String
List of Values: Dynamic
Value Options Level1:
                     Show on (Viewer) Panel :Editable
                      Prompt text: <text>
                      Sort Order: Ascending by value
                      Prompt With description Only : False
                      Optional Prompt: True
                      Allow multiple values: True
                      Allow discrete values: True
                      Allow range values: False
When I execute the report with the client of Crystal Reports 2008 (the developer tool), in the initial screen shows a list box where I can select the values from the left box and add it to the left box (as a usually filter). When the number of options (LOV) is more than the maximum of the system, I have a input box bellow the list box, where I can insert any value (manually) and a button to insert it into the left box. When I publish the Report in the infoview, this filter is modified and the input box where I can introduce manually values is not showed and I can insert only the values showed in the list box, it causes that I can`t select a lot of values that is in the master data of SAP BW, because they arenu2019t listed in the list box.
There is any option to ability this option in the infoview.
2)     My Bex query, have a date filter with variable in the restricted key figures, when I execute a Crystal Reports, the infoview (and the Crystal Reports 2008 designer) ask me 2 times the same date, first only the date and second the date and the rest of parameters (introduced in the report of Crystal Reports).
Why I need insert the date 2 times? How can I modify the Crystal Report for ask me only one time all the parameters?.
Thanks.

Hi Abhilash.
Thank you for your information.
1) Yes, the parameters are created in the Crystal Reports designer. I have created the parameters in the Crystal Report because I use the same Bex Query to create some Crystal Report, in other case, I will need create some Bex Query.
2)The Bex query has the date filters and I have created some filters in Crystal Reports designer, the date filter from the Bex query is created automatically in the Crystal Report Designer but I don't use it, I haven't created it anytime. I use my filters only in the record selection. The date filters from the Bex query is showed as Static, and I can`t delete it, if I modify the parameter to dynamic or static with values, at first step ask me again static without values and the second step of the report execution ask me the parameter as I have defined in Crystal Reports Designer, my parameters fields are dynamic. A lot of reports have subreport, but I have created one of them without subreport (to trial) and the Crystal Reports ask me the date filters at first execution, and when I insert the date filters, in the second step, ask me the date filters again and my parameters fields again.
Thank you again.

Data missing while running a crystal report from SAP B1 2007A

Dear All,
I am facing an issue that is if i run a report from SAP B1 using Crystal reports AddOn, it misses out some data.
Few Initial pages and a last page appears in the report. But when i run the same report using Crystal reports Designer it shows the actual number of pages. I have tested the above discussed issue on the server & workstation machines.

Dear All,
I would like to explain the above posted problem in detail. I need your generous help, I am facing an issue that is for Crystal Reports which are based on 'Financial Templates' data is missing out. For Example, If i run the report using 'Crystal Reports Designer' it is showing the whole Financial Template based on 5 pages, but if I try to run it from 'SAP Business One'
using 'Crystal Reports AddOn' it is missing out the data e.g. it is showing Page 1 and then Page 4 & 5.
Page No. 2 & 3 is missed out. For your information it was running fine from the past two months now I am
facing issues in running it. Rest of the reports are running fine.
I have tried reinstalling the Crystal Reports Runtime and Crystal Reports AddOn for SAP B1 on
Client machines, but the problem is not resolved yet.
Server Machine Details
Version : SAP B1 2007A Server SP01 PL08
OS: Windows Server 2008 R2 (64-bit)
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio
Client Machine Details
Workstation 1
Version : SAP B1 2007A Client SP01 PL08
OS: Windows Vista Enterprise (32-bit)
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio
Workstation 2
Version : SAP B1 2007A Client SP01 PL08
OS: Windows XP
Crystal Reports AddOn for SAP B1 (64-bit)
Crystal Reports Runtime
Crystal Reports Runtime for Visual Studio

How to trigger crystal report from SAP ECC

Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.

Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don

Crystal Report and SAP BW Query

I have developed the Crsytal Report (ontop of SAP BW Query), and save this report into my local c:\ drive.
Now I made some changes to the BW Query (this is the Datasource of my Crystal Report) to include new Key Figure and Characteristic via BEx Query Designer.
Now when I open my existing Crystal Report, I dont get see the new key Figure/Characteristics that I just included to the BEx Query. Why? Is this bug? How can we update the Crystal Report automatically when the underline BEx Query has changed?

Hi,
We have similar case when the underline BEx query has been changed.
In our case, the Variable value is not appear in CR.
Example, a Variable has been created and assigned to the Cost Centre.
In BEx Query, I can see the value of the Cost Centre and can therefore select the value from the Variable field.
In CR, I have the Cost Centre prompt as parameters, but there is no value for me to select.
Database Verify has been performed.
Anyone come across this?

Performance issue - Open a Crystal Report from SAP BW

Hi,
I have an general question on the performance of Crystal Reports: We are using Crystal Reports 2008 SP 2 in context with SAP BW 7.0. We don't have a BO XI. We use the BW as a central storage for our reports. Now we have the problem that the opening of some reports takes a long time. For expample one report needs ~13 secound an another > 5 minutes.
Where can be the problem? What happens in SAP BW when a report is called? And what can we do to make it faster?
Thanks for your informations!

Hi Ingo,
the value of MaxPickListSize is "c8".
Yesterday I have spent a lot of time to find the bottleneck. I have traced the SQL statements, which are performed from Crystal Reports / Integration Kit when I open a report. It might be the values for the parameters. That's our situation:
Crystal Reports
|
Query (restriced on Cube 1)
|
MultiProvider
- Cube 1
- Cube 2
- Cube 3
- DSO 1
The slow report is based on the BW Query and in the filter restricted to the Cube 1. If I open the report, all values for the parameters are read from all the InfoProviders under the MultiProvider (Cube 1, Cube 2 Cube 3 and DSO 1). The very big DSO 1, which is not used, increases the duration extremly. This may not be the desired behavior?! Is this a bug? I would expected that only the values are loaded from Cube 1.

Run a Crystal Report ( with SAP BW Query ) on BO XI R2 SP2

Hi SAP Guru,
In one customer, we want integrate SAP BI 7.0 on Business Objects XI R2 SP2 ( Full Control Right ) to delivery dedicated reports to target users ( Scheduling )
We strart with a simple query that it works fine on Bex..
The integration Kit for SAP was installed on BO server and transports on SAP BW Server (based on Thread of Ingo).
For scheduling, I create a Business View based on my BW query and I create my crystal report. Everything work fine, when I launch my report localy on my desktop.
The problem arrives when I want schedule my report on the CMC or in infoview. I received a error message :
Failed to open the connection. D:ApplBusiness ObjectsBusinessObjects Enterprise 11.5DataprocSched - system - ~tmp148860c59ff44c6.rpt
I try to schedule a report without Business View but I receive the same message.
Questions :
1 ) Is the Integation Kit for SAP is enable for this environement ( SAP BI 7.0 and BO XI R2 SP2 ) ?
2) Have you any suggestion of resolution for my problem ?
If you need more info, I will update my thread..
Thanks in advance for your help...
Cédric

Thanks for your quick reply !!!
are you able to run your report on-demand in the InfoView?
--> I receive my error when I open/run the report.
Which version of CR Designer are you using?
--> CR 11.5.9
Any chance to upgrade? There is already SP6 available for XI R2.
--> We project to migrate to R3.1 this year but we want to show report earlier ( if it's possible on R2 of course ).
Cédric

Run-Time error '-2147417848 (80010108) in Crystal Report on SAP BW Query

I have installed Crystal Report 2008 SP1 and the Business Objects Integration kit for 3.1 but when I try to create a report on top of an SAP BW query using the toolbar, after entering the logon parameters for SAP BW, I get a error message :
Run-Time error '-2147417848 (80010108)
Automation error
The object invoked has disconnected from its clients.
CR exits after this error message.
I have tried uninstalling the Kit and CR, cleaning up the registry, and installing it again and still got this error message - It is the same for all my SAP BWs.
Anyone ever had this?
Thank you,
R.

Is this still an issue?

How to automate revision control of Crystal Reports from SAP B1?

I am reviewing our revision controls and am trying to figure out a good way to maintain a history of the SAP B1 Crystal Reports. Is there a way to automatically export the Crystal Reports to an external file? I know that developers can save the file by hand when they do changes, but that seems rather error prone. I am looking for a way to automate the export so that I can then save it to our version control system.
Does anyone have any suggestions on how to automatically export the Crystal Reports?
Thanks.

Hi,
Try with this query to export crystal report:
SELECT T0.[DocCode], T0.[DocName], T0.[Author], T0.[Notes], T0.[CreateDate], T0.[UpdateDate], T0.[UserSign] FROM RDOC T0 WHERE T0.[Category] = [%0]
Thanks & Regards,
Nagarajan

Developing Crystal Report from SAP BEx query

Similar Messages

Maybe you are looking for