Development and consolidation same system

Hello All,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track? If yes then is there any other factors to be considered?
Also the SC state is in grey whereas if i click synchronize DC dependencies it turns green. Any suggestions on this?
Regards,
Anand

HI,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track?
you can declare development and consolidation as the same system. but then you wont be able to distnguish between the changes you made.
keeping consolidation virtual is an good option than keeping development and consolidation as the same system.
and without specifying test system is not a good option, test system should have to be there, as at that stage only you assemble and check you development as a complete application.

Similar Messages

CHARM: Developer and Tester same USER in normal correction

Hi Expert,
i'd like to know if in a normal correction it is possible that Developer and Tester are the same persone.
So the same user have to confirm development and confirm sucessful test.
Now if i try to use the same user i've an error.
Can you help me ??
thanks
Francesca

SPRO
search for Make Settings to Change Transaction Types, and select that activity.
Highlight SDMJ, select the Use Partner Functions folder on the left
in the table on the right:
The first column in the table is the status
The second column in the table is the partner function that the current business partner will be assigned to when save is clicked and the status becomes the first column.
The third column in the table is used for determining if partner functionsu2019 business partners are the same when the document is saved and the status becomes the first column. For example, the Tester (SDCD0002) equals the Developer (SDCD0001) when the status is Confirmed (E0009).
Delete the value in the third column to stop the comparison.

NetWeaver 7.0 and ERP to the same system

Hi,
We currently have a SAP ERP Development system with SAP ERP 2005 (ECC 6.00, kernel 7.00) with ABAP only (not Java).
We would like to install a Business Intelligence (BI) system but we don't have any other available server.
I would like to know if it is possible to install SAP Netweaver 7.0 (including BI) in the previews mentioned system. Is there a Guide available?
The second question that I have is if it is proper for BI to have a development and a production system?
Thanks.

Hi,
check the other thread if it can help you,
ECC and BI in the same system
For BI, you may have only ABAP or both ABAP+JAVA. in case of only ABAP you can't use the BI functionality on Java. Now what functionality you would get extra in BI-Java, check here..
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
Regards,
Debasis
Edited by: Debasis Sahoo on Apr 16, 2009 10:59 AM

Risks of two development groups in the same system

Hi,
I need your help.
I'm looking for a document about the risks having two development groups in the same system.
The point is: An external party will come soon and start the implementation of a mini H2R in the same system as we (the internal team) are working for SD, MM, CO,... As the developments are cross-client, I'm asked to write a document explaining the risks in such cases like:
conflicts: working on the same objects
authorisations: each group should be assigned to different packages
planning: the go-live should be at the same time
transports: there can be conflicts on a transport-level
If you have any documentation that can help me, please let me know.
Kind regards, Gilles.

I hope this is not considered a link farm:
Potential conflicts between already released transports:
Program to validate transport sequence
Uwe Schieferstein's blog on "Dangerous Liaisons in User-Exits and How to Avoid Them":
/people/uwe.schieferstein/blog/2008/11/11/dangerous-liaisons-in-user-exits-and-how-to-avoid-them
Just two of many things to observe...
Thomas

Development and Quality Assurance clients on the same instance

Hello,
Is possible to work in parallel with two clients: one for Development and the other for Quality Assurance on one SAP Solution Manager instance: SID?
Regards,
Lui Peng

Hi
It is possible and you can have DEV and QA on same server
We have at one location 2 server solman landscape in which we have DEV(100) and QA(200) on 1st server and PRD(100) on another server.
Hope it clarifies your doubt
Regards
Prakhar
Edited by: Prakhar Saxena on Nov 5, 2009 11:20 AM

I have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

i have an iPhone application already developed and it works great ,now i need to make that same application for my iPad .can someone please tell me step by step instructions on how to make it .

Try the developer's forum:
https://discussions.apple.com/community/developer_forums

Dreamweaver 8 and DW cs4 or DW cs5 on the same system?

Hi all,
I'm using DW8 + MX Kollection 3.7 pro for large sites and I I'm thinking to install DW CS4 or CS5 along with it.
So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
I don't mind working on the same website with different version of DW.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
For example: will DW CS4 + ADDT retain all server behaviuors created in DW 8? or, at least, will DW CS4 editing break server behaviour so that I will not able to work again on the page with DW8?
Sorry for all these /dumb) question but I fear upgrading (every application) will break something working right away.
TIA
tony

So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
Yes, you can install them on the same system, and no, they won't interfere with each other. Each version of DW installs as a complete, standalone application.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
No there's not a problem.

Final Cut Pro X and 7 on same system

I am using Final Cut Pro 7 and I was not very keen on Final Cut Pro X when I tried it out.
However, I have just learned that it could be advantageous workwise if I am prepared to work on some FCPX projects.
I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
I know that in the past (and I mean the distant past) I have had problems trying to run different versions of the same software in the same machine and I'm too comfortable with FCP7 to just leap into working with an application about which I got an unfavourable impression and which many fellow professionals have told me instigated a move to Premiere.
Can somebody give me some definitive advice, please?

Alf Megson wrote:
I
I'm just curious to know if it is safe to run both applications on the same system; e.g. do they share preference files? Do they use the same plugins folder etc.?
Yes it's safe and no they don't use same plug-ins.
I'm running FCS3 and FCPX, Motion5, Compresor 4 on two systems. No problems.
Bets would be to follow these steps – the same start-up explanation.
Russ

OBIEE 11.1.1.5 and OBIEE 11.1.1.6 Installation on same system.

Hi All,
Is it possible to have OBIEE 11.1.1.5 and 11.1.1.6 on same system?
I know this is not practical and kind of unrecommended thing to do. But we have an OBIEE 11.1.1.5 instance installed on a server. And we don't want to deinstall it. Rather, if possible, we want to install OBIEE 11.1.1.6 along with this 11.1.1.5 instance.
Also, is it possible to have OBIEE 10g and OBIEE 11g on one system?
Thanks in advance...
Dev.

Hi,
Why don't you go with Upgrade option..thats best way...you just upgrade obiee11.1.1.5.0 to 11.1.1.6.0
Upgrade help Doc:
http://blog.guident.com/2012/03/upgrade-obiee-11-1-1-5-to-11-1-1-6/
http://gerardnico.com/wiki/dat/obiee/patch_11g_111160
Also, is it possible to have OBIEE 10g and OBIEE 11g on one system?
never tired you can tried to configre manual port configuration way
Thanks
Deva

Configuring tomcat and apache on the same system

i need to configure tomcat and apache on the same system.
first i have configured apache and it is working well.
Next is have configured tomcat and it is working well.
i need to interlink tomcat and apache. so i downloaded jk connector and i have configured it.
i gave an entry in the httpd.conf as
Include /tomcat/conf/auto/mod_jk.conf
i have copied the file mod_jk.so to /usr/local/apache/libexec/
went i start apache after the entry is given it gives the error like this
cannot load /usr/local/apache/libexec/mod_jk.so into server: ld_so.1. /usr/local/apache/bin/httpd: fatal : libgcc_s.so.1 : openfailed : no such file or directory in linux
please help to configure this.
i have done every thing as it is in apache.org documentation. please give the complete configuration. some say that tomcat is not compiled according to apache1.3. but i configure jk connector as --with-apxs=/usr/local/apache/bin/apxs
send me the reply
thankqs in advance

Hi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand

Query developement and se16 access on productive system

Hi,
we are setting up an authorization concept on ERP2004s and our users asking for query development rights and se16 on our productive system. I think queries and se16 should be on the test system due to security reasons. Please post some feedback how do you think about it!? I think queries should be developed on the test system and transported.
Thank you in advance!
Best regards
Frank

Hi Frank,
I dont think that you can give access to writing a quaery in production system.
writing a query also need access to:
Transaction Code: SE16
Authorization object: S_TABU_DIS
Activity: 02 AND 03
Risk: The risk here is that users who have this access, have the ability to maintain table data directly in the production system. This includes transactional, masterfile, security and configuration data.
Hope it is useful.
Please award points if it is useful.
Thanks & Regards,
Santosh

Can we have same system Id for ABAP and JAVA in CRM 7.0 ?

Hi,
After installing CRM 7.0 ABAP, I want to install CRM7.0 Java using same system id as of ABAP. Is it possible ?
Regards,
Vivek Gaur

Well I found the solution for it. It looks more of a bug in sapinst that it doesn't allow to change userid !
All you need is to to create users ora<sid> and <sid>adm before running it and assign the required groups to them and it would work fine
Thanks Markus for you keen interest in my issue
Regards,
Vivek Gaur

How to create production and development enironment in same server

Hi All,
We are using OWB10.2.0.1 version and we have only one database which has two schema.we are using default control center to run the mappings.
We don't have separate servers for development and production.So we use same control center for running the mapping for production and development, cause of this we are getting some problem while changing the existing mapping.
So we are planing to separate these environment like production and development with in one server and both environment should have the same database and we need to lock the some mapping to development environment which is in live.
Please suggest me how can i follow because i don't have EXP in these area.Hope you understand the situation.
Thanks,
Kumar.

Hi,
I am not sure if we can lock the mapping according tot he env. you log into. I can provide an alternate solution by using different project names and store the mapping into them or using different mapping names to indicate them as prod or dev maps.
From a developer perspective i would suggest u have different environments for dev and prod and as a manager i would like to inform that u have have many audit issues if this goes on.
Regards,
Bharath

Classic scenario : Confirmation and invoice in same system ?

Hello experts,
My question is as follows.
I am trying to learn various scenarios in SRM as a beginner.i undrstand how the scenarios are present and what they mean .
In classic scenario,
can i create a goods receipt in ERP(MIGO) and then a invoice in SRM ?
If this is possible, then i wont be able to see the related documents in the shopping cart for the self service procurement business process.
Help me understand this process and the technical scenario.
Will there be a constrainst that always the confirmation and invoicing has to be done in the same system. either ERP or SRM ?
Thanks
per

Hi Per,
1. Yes this is possible, We can create the confirmation and invoice in either systems.
2. However most of the business requirements would always follow creating the follow on documents in one of the system, mostly ERP. It is totally dependent of the business and the customer. The decision of deciding on the Classic or ECS would always take this into consideration.
Anything we do in the system should justify the business need of the customer. The possibility to create the documents is a option to provide the flexibility. Hope this helps. Let me know incase of more clarifications.
Regards
Mustameer

Can I run Photoshop CS4 and CS5 on the same system?

I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
Run on the same system - not ness to run at the same time
Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
Thanks in advance for your help
BJ

Yes, you can run CS4 an CS5 on the same computer. They install in different folders and don't get in each other's way. As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5. This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
When I installed PS CS5 I had problems with my scanner driver. Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

Development and consolidation same system

Similar Messages

Maybe you are looking for