Development and Learning

Hi freinds,
Please explain me what is Learning Solution and SAP Tutor?
Regards,
Parul.

Using Learning solutions,
1. You can create Course booking and attendance.
2. You can link this to Portal ( if u have one) This can be done thorough BSP Application HCM_LEARN
Regards,
Jhovee.

Similar Messages

Different view to develop and library module

Hello everyone, I have a big problem during my workflow, or when working images from the development at the end of the work as the images are like me and very sharp. But when I see in the library module are not sharp and the blacks are very mordibi. Below I post the link to see for yourself.
MODULE DEVELOPMENT:
MODULE LIBRARY:
The problem is that when I export my image is identical to the form LIBRARY and not that beautiful clear form DEVELOPMENT. So I find myself not export images with crisp blacks and dishes.
I already tried to delete the cache, but does not change anything, and I use 1:1 previews, you have no idea how to fix my problem?

twenty_one wrote:
Ah, now I see the rightside of that screenshot, with, as you say, sharpening 150 and NR 0. That's a combo it would never even occur to me to use, not in a hundred years...
Anyway, I tried this with an ISO 1250 shot, but couldn't see any differences anywhere. But maybe you need to go higher.
I've learned to never take anything for granted when reviewing LR forum posts. An ISO 1250 shot is probably too low with most DSLR cameras to see this issue. On my 5D MKII I could really only see the "lightening" between Develop and Library views with ISO 6400 raw images. It may also show up at lower ISO settings with images that are heavily underexposed (i.e. LR Exposure +1 and greater), and with smaller sensor cameras (1.6 crop, P&S).
Gianlu24, keep in mind that Adobe increased the Sharpening amount from '100' in LR3 to '150' in LR4 when using a high 'Masking' setting. For most normal images and Masking settings you should use a Sharpening amount below '100.' There are two basic types–Capture and Output sharpening, each adjusted using separate controls. In addition you can apply both Global and Local Capture Sharpening in LR. These three articles by Laura Shoe may be helpful:
http://laurashoe.com/2011/08/21/sharpening-in-lightroom-part-one-overview-and-capture-shar pening/
http://laurashoe.com/2011/09/27/creative-sharpening-in-lightroom-sharpen-eyes/
http://laurashoe.com/2012/07/11/sharpening-in-lightroom-part-three-output-sharpening/

Tonal change between develop and library module

After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple? Shooting with a nikon d5100 with ADL turned off as per other similar problems brought up in this forum. Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.

dennis4g1 wrote:
After having applied some changes in the develop module when I switch back to the library module I am experiencing a sever foreground tonal change? I can add that the foreground in this particular photo had a grad filter applied. The tone shifts from a cool blue to a purple?
Are you using a calibrated/profiled monitor? In Develop module, LR displays in ProPhoto colour space, in Library module it's Adobe RGB. If the monitor doesn't have a proper profile there could be differences in view between Develop and Library. However I would have thought LR would default to assuming monitors behave like sRGB if there's no profile (or no colour space info in the profile).
dennis4g1 wrote:
...Which by the way I still experience but have learned to live with is that after import of RAW picture looks good for about a second then exposure changes.
The usual cause for that is that Adobe can't read Nikon proprietary metadata such as Picture control settings. If you shoot with the Nikon Picture Control setting (Standard, Portrait or whatever) at default settings, and if you use the corresponding profile in Lightroom's "Camera Calibration" panel (Camera Standard, Camera Portrait etc) then the appearance should be very close to the out-of-camera jpeg preview appearance.

How necessary is for an ORACLE developer to learn JDeveloper

How necessary is for an ORACLE designer/developer to learn
JDeveloper/SQLJ/JAVA to develope an enterprise level internet
application?
null

Asad Iqbal (guest) wrote:
: How necessary is for an ORACLE designer/developer to learn
: JDeveloper/SQLJ/JAVA to develope an enterprise level internet
: application?
As you know, the business and programming community has
adopted Java in an unprecedented manner.
Java will be the lifeblood in the infrastructure of many
future (enterprise level) applications and future platforms.
So, I believe it is vital to understand Java!
To develop an enterprise level application without Java,
would be a difficult propositio to sell!
Ofcourse, significant technical expertise in
Designer and Developer, PL/SQL, etc
will continue to be valued for many years to come.
But this is just my personal opinion.
null

SAP-XI System Installation and Learning help

Hi!!,
I'm working as "ABAPer" from last 5 years. Recently I installed Miniwas 620(ABAP) from a CD I got through by SAP book purchase. I'm able to do a lot ABAP things in my system.
Now I'm planning to Upgrade my knowledge to XI. I studied lot of material in SDN(thanks!! to all the contributors). I have fair knowledge of XI functionality and each component. Now I think I should be sitting in front of system to play around and learn. I thought of using my system. I have following queries on this.
1. Does my system has XI components?. I'm able to get into
XI based Easy access menu, but If i click on any node for example 'start integration builder' I get a message 'address not maintained'. I'm not sure How do I install or configure all the components. Can any one help in this.
2. If I can not install in my system, what is the best way to learn XI.
3. In real time projects, what is the role of a XI-consultant and XI-developer( I'm seeing two kind of certifications in SAP site ). I just wanted to know to analyze where do I fit in.
4. Any good training around, Problem with SAP training is they do not have one course with full XI.
5. Any idea how is SAP's Online-course material?, Is it read only or interactive?. how it looks like?. Is paying $500 for each course is worth or not?
I really appreciates your Inputs on each of queries.
Thanks!!
Prit

1. Does my system has XI components?. I'm able to get into
XI based Easy access menu, but If i click on any node for example 'start integration builder' I get a message 'address not maintained'. I'm not sure How do I install or configure all the components. Can any one help in this.
Nope, you do not have XI components. XI 3.0 runs on Web AS 6.40 ABAP + Java Stack. One more thing.. There is no sneak preview for XI and no free downloads.
2. If I can not install in my system, what is the best way to learn XI.
Through Training either from SAP or some third party companies.
3. In real time projects, what is the role of a XI-consultant and XI-developer( I'm seeing two kind of certifications in SAP site ). I just wanted to know to analyze where do I fit in.
The role of XI Developer is to get the requirements of Source and Target systems, creating the maps, developing BPM (Business Process Management) where needed, development of custom adapter modules etc.
The Certifications are 1. Basis 2. XI Developer
TBIT 40, 50 and 51 are for Basis and
TBIT 40, 41, 42, 43, 44 are Developers
4. Any good training around, Problem with SAP training is they do not have one course with full XI.
Heard some third party people are giving training, some of our forum members may know about it and if you provide a contact mail id they might get in touch with you.
5. Any idea how is SAP's Online-course material?, Is it read only or interactive?. how it looks like?. Is paying $500 for each course is worth or not?
It is the price you pay to learn, if there are cheaper ways you can always explore.
I tried to answer as much as I can, other forum members might come up with good suggestions.
Good luck.
regards
Shravan

I have just became an Apple Developer and new to this whole developing thing.

I have just became an Apple Developer and new to this whole developing thing. I became an apple developer to support what I'm doing.I just graduated high school and became a self learning video producer. I created videos since I first got into high school and that was my major. I'm planning on making a podcast channel. What I'm really asking is, how do I create an app for my website for older version iOS device (at least iOS 3 or iOS 4)???

etresoft wrote:
If you want to make apps, you will need a Mac.
Three of my friends told me I can use a windows to create apps.... they told me about this site: http://mobile.conduit.com/

How to develop and deploy Spring framework app in Sun One App Server 8.1

Hi,
Can anyone give sample on how to develop and depoly spring framework application in J2EE 1.4 Server or Sun One App Server 8.1 .
Its very urgently needed for my project to learn and implement spring framework i would very thankful if any one can help.
Thanking You
Naveen

Pretty standard for AS8 to deploy Spring. The only thing to watch for is the security manager, which you'll probably want to turn off.

How do I become a developer and will I need Mac or something

How can I become a developer
And if I become a developer will I need a Mac or I can work from normal pc (windows software)

If you're serious about learning to develop then visit the developers forum and register.
If you just want an advance chance to get iOS5, I would advice you not to do this. The purpose of these betas is not rough edging, but for developers to se how the new OS affects their apps and how to update them to work. There is a good chance many of your apps will not work and that your iPad might brick.

Focusing Language and Learning Goals

I'm writing to ask for some guidance on choosing a language and course of action in learning programming.
I've seen thread after thread with questions from newbies, asking, "What is the best language to start with?" and then it always starts a flame war or someone just answers, "There's no best language, it's best to pick one and start learning it." My question is a little bit more focused than that.
First off, I've been programming my whole life, in very limited capacities. My deepest training was in C++. Whilst in my EECS degree program, I resolved to never be a software developer because I couldn't stand not interacting with people for such long periods of time. Instead I realized I wanted to be a math teacher, and so that is the path I have taken.
But now that I'm well down that path, I've started to realize that perhaps I could develop my own software to help me in the classroom. If I want to demonstrate the Euclidean algorithm, what better way than to have a piece of software that breaks down the process? Students could run that software as part of their studies, and the advanced students might even develop programs for themselves. Or, with an Ipad in hand, why not have an app that lets students take their own attendance? It would certainly streamline some of the needs of classroom management.
There's obviously a lot of great stuff already out there for math, and for education, but I want a way to more directly create things specific to my lectures. If I'm teaching a specific way of calculating a percent, I want to create an app that aligns with my teaching style, not just another calculator app that requires the student to learn twice.
The most I use in class right now is iWork Numbers/Microsoft Excel for my stats class. Students can learn the basic statistical functions, and turn some of their data into graphs.
I have dabbled a bit with R, and used Maple in college. I've started the basic tutorials for OS X/iOS development and have actually made good progress making an OS X app that takes a text string, converts it to numbers, and performs encryption using modular addition and multiplication. I sometimes use Wolfram|Alpha to save myself some time in getting quick solutions to equations or base conversions. I know of MatLab, Mathematica, and recently people have been telling me to check into Python or Ruby. I also know basic HTML, and while it's forgotten now, learned Javascript and PERL in college.
If I keep on the path of Obj-C/Cocoa, I think it will have great benefits. Unfortunately, anything I produced for Mac would only be usable on a Mac, so it wouldn't be universal for all of my students. Perhaps then learning a web language would be better. Second, I'm wondering if the primary use is mathematical, then perhaps my time would be better spent learning Mathematica Programming Language, or R, or something based less on GUI and more on simple coding of algorithms, maybe Python or Ruby?
It seems that Mathematica already has a lot of demos for different math concepts, so why reinvent the wheel is also a question I have. I think overall, it would be good to have more control and design things the way I need. And then, if I do want to make an "Attendance" app or something else, I would already have the programming experience to more easily design something for my iPad or MacBook.
The related question to this is what is a good language to teach to my students? In his TED talk, Conrad Wolfram says one of the best ways to check the understanding of a student is have them write a program. But if Mathematica does the math virtually automatically for them, then I'm not sure that will get the deeper experience of working out logic for themselves, like you do when you're writing C, or a traditional procedural language.
I know that programming takes time to learn, but I also know that at this point, my goal is not to be able to make an app like "Tiny Wings." With the app store ease, some of my work may be an extra revenue stream, but I see myself as more of a hobbyist, and now teacher looking to software development specifically for its ability to help me demonstrate mathematical concepts.
I think I will push ahead with Obj-C/Cocoa for OSX/iOS, but if anyone has some better guidance regarding all of the other available stuff, it would be much appreciated. I don't think I would want to go fully to the web (I like apps), but perhaps someone could suggest a nice way of bridging what I produce in XCode to a universal web version. For example, if you come up with an algorithm in obj-c is it easiest to transition that to ruby and run it online, or is there another approach that works better?

Another vote for Python. It's the best language I know of for getting your hands dirty quickly, but as you gain more experience it scales very nicely into a full-blown object-oriented language. There are some very nice GUI toolkits you can use with it if you need a graphical interface, or as K T suggested, you can hook it up with a web-based front-end. If you want to get really daring, you can use the PyObjC bridge and develop native Cocoa apps in Python, but in my experience, if you're going to go that route, you're better off just learning Objective-C, which is not all that difficult really. The difficult part about Mac or iOS program is wrapping your head around all the functionality in the Cocoa framework.
The nice part about Python in the classroom is you can use it in an interactive learning mode. It would be perfect for progressively stepping through a math problem, showing each step along the way. Your students could participate and learn the basic functionality of Python at the same time. That's how I cut my teeth on Python (as part of a natural language programming class in grad school).

New Development and CA

We are in process of developing new eCommerce application on ATG. We also have a business requirement to manage images and products using BCC. Most of the business requirements in phase 1 of the project is to configure and deploy application code along with CA ( BCC / Merchandising). My question is whether it is advisable to do new application development along with CA configuration at the same time. What does ATG best practice say in this regard. My opinion is that we should do new application development (deliver new functionality) first to be followed by CA initiative. I have never directly worked on CA projects but I have been part of large teams with multiple initiatives where CA being one of the initiative and I have seen there are quite a few steps that one need to follow in configuring and deploying CA / BCC e.g. versioning of modules, modifying DB schema to support versioning etc. I don't want to run into issues where our main focus is to deliver new functionality and want to avoid the complexity of doing both new development and CA at the same time.
Edited by: 899085 on Nov 24, 2011 12:01 PM

The best practice recommendation would be to include any BCC/CA implementation as early as possible in your project plan. Understanding the process of how the business users will be using the tools and what impact any customizations to the ATG code your applications make are very important in a successful rollout of a site usign the BCC and Merchandizing. We tend to see that the projects which attempt to implement BCC/CA at the last minute are the ones that encounter the most problems. Projects which include the BCC and CA in the early stages of the applciation design, project planning, and UAT and load testing go through a much smoother test cycle and launch.

Development and Production Requirements for a Forms/Report application

Dear all,
We have an application witch run in client/Server mode using Forms/Reports 6i For 300 users.We want to migrate it on Forms/Reports 9I using Oracle 9IAS and Oracle 9IDB.
I would like to have advises about material requirements of both development and production environment((developer deskop, development appServer and databaseServer, end user desktop,production databaseServer and production AppServer).
Thank u for giving more details about my request.

I have my dev and production on 2 different databases/instances, and the workspaces have a different name aswell (think 'dev' and 'prod').
I do reuse my application ids, which makes the whole process a lot more manageable: easier for me to identify and replacing a whole application.
However, when i want to replace only 1 page, apex stumbles over the workspace. Bummer.
So i took an export of a page on both workspaces, and opened the files.
prompt Set Credentials...
begin
-- Assumes you are running the script connected to SQL*Plus as the Oracle user APEX_040100 or as the owner (parsing schema) of the application.
wwv_flow_api.set_security_group_id(p_security_group_id=>nvl(wwv_flow_application_install.get_workspace_id,1377027056414870));
end;
wwv_flow_application_install.get_workspace_id,1377027056414870));
I took both workspace IDs and keep them in a simple txt in my installation-files folder. Each time i need to import a page from dev->prod i go in the exported file from dev and change the workspace id to the id of my production workspace id. Everything works magically after that.
If your application ids also differ, you can try changing the id in the exported file aswell, but i can't tell if it works or not since i've not done that yet.
prompt Set Application ID...
begin
   -- SET APPLICATION ID
   wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,130);
   wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
null;
end;where of course you'd change around nvl(wwv_flow_application_install.get_application_id,130);

Development and marketing of SAP EP solutions - any licenses required?

Hi
Not sure which forum to post this in, so - maybe Coffee Corner is a good start
My question is about the licensing required to development and marketing small add-ons / extensions for SAP Enterprise Portal.
Is it possible for the individual developer to develop and market small add-ons for EP in Java WDP, making use of a trail EP installation?
Do you need a special license for this (to develop commercial products)?
Maybe like a [SAP NetWeaver Developer Subscription|https://www.sdn.sap.com/irj/scn/subscriptions/development?refer=subscriptionslandingpage], or the [SAP Composition Subscription|https://www.sdn.sap.com/irj/scn/subscriptions/composition?refer=subscriptionslandingpage]?
Reading up on the [Subscriptions FAQ|https://www.sdn.sap.com/irj/scn/subscriptions/software-faq#q-4-5], and it is not very clear:
Can I use my developed add-ons, extensions, developments, or modifications in a production environment?
In order to run your add-ons, extensions, developments, or modifications in a production environment, you need to purchase the applicable license from SAP. SAP customers or partners who already have an applicable license can use SAP NetWeaver in a production environment.
So-
"SAP customers or partners who already have an applicable license can use SAP NetWeaver in a production environment"
I'm not expecting to run the SAP NetWeaver Developer/Trail version you get with the subscription in a production environment - the question is would any prospective buyers of your developed add-ons be able to run these in their (fully licensed) NetWeaver / EP production environments?
(I feel this FAQ is not answering its own question correctly).
Purchasing a full EP license is a little out of my budget, and even the two developer subscriptions mentioned above are only available in Germany & the USA (and I reside in neither of which).
Any suggestions from the guys & girls of the Coffee Corner?
Thanks!

I am not a lawyer, but my interpretation of this is that the subscription systems are for "sneak previews" of releases and experimenting with the software to see whether you like it or not...
So this means that if you do development work on it and want to use it in a production environment, you will need a full license to run the software productively first, and then add your development to that licensed landscape.
This is a different topic to licensing your own development. For this you would need to become a solution partner and request your own namsepace in SAP, and then license it as optional software via service.sap.com.
For the "little individual" like you and me, this is not really an option IMO.
In some special cases, I have seen external coding included in the standard system, and you get a special mention for it sometimes in the coding comments.
I was thinking about the same as well because I am busy experimenting with a tool for making dual maintenance of roles during upgrades easier and know a few customers who would be interested in such a tool (possibly controlled centrally by a SolMan CTS+ with after import rule sets).
Being ABAP, I think I could try to sell it once or maybe twice... but after that I expect it would be "in the wild" and see others posting it here on SDN as well...
On the otherhand, ABAP is more of a hobby for me and I am not a guru at it like many others here. If I were to post it here myself... then I could benefit from other contributions to improving it and making it more robust - like an open source project.
Just some thoughts,
Julius

Development and Quality Assurance clients on the same instance

Hello,
Is possible to work in parallel with two clients: one for Development and the other for Quality Assurance on one SAP Solution Manager instance: SID?
Regards,
Lui Peng

Hi
It is possible and you can have DEV and QA on same server
We have at one location 2 server solman landscape in which we have DEV(100) and QA(200) on 1st server and PRD(100) on another server.
Hope it clarifies your doubt
Regards
Prakhar
Edited by: Prakhar Saxena on Nov 5, 2009 11:20 AM

Development and administration methodology

Hi,
I am looking for information about portal development and administration methodology (How to manage the PCD, iViews, Roles, user groups, etc... ?)
Any personal experiance tips and suggestions will be appreciated.
Thanks,
Elad.

Hi Elad,
I think a good start is help.sap.com. Take a look at the following URLs.
Portal Administration Guide:
http://help.sap.com/saphelp_nw04/helpdata/en/34/76bd3b6e74d708e10000000a11402f/frameset.htm
Portal Developer Guide:
http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm
You will also find some stuff in the overall Development Manual:
http://help.sap.com/saphelp_nw04/helpdata/de/21/82a9058fa8de46b1ba7522289345b2/frameset.htm
Depending on your personal strenght you can do your portal development in e.g. HTMLB jof JAVA. You'll find some infos on that here:
http://help.sap.com/saphelp_nw04/helpdata/en/fd/01f34026d70b06e10000000a155106/frameset.htm
http://www.sapdesignguild.org/resources/htmlb_guidance/index.html
Or you can try out some Visual Composer stuff. Take a look at this URL:
http://help.sap.com/saphelp_nw04/helpdata/en/27/7c7d404d84cf62e10000000a155106/frameset.htm
If you are more into ABAP you can of course try out the latest WebDynpro for ABAP but this works only for NW 2004s. You'll find a lot of information here on SDN. Look at the current frontpage!
Regards,
Oliver
Message was edited by: Oliver Kohl

Development and consolidation same system

Hello All,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track? If yes then is there any other factors to be considered?
Also the SC state is in grey whereas if i click synchronize DC dependencies it turns green. Any suggestions on this?
Regards,
Anand

HI,
Can i declare both the development and consolidation as the same system without specifying test and production system in a track?
you can declare development and consolidation as the same system. but then you wont be able to distnguish between the changes you made.
keeping consolidation virtual is an good option than keeping development and consolidation as the same system.
and without specifying test system is not a good option, test system should have to be there, as at that stage only you assemble and check you development as a complete application.

Development and Learning

Similar Messages

Maybe you are looking for