Development/configuration to get some Pricing data from interface

Hello, Although I have been  7 years in SAP but have not worked much on pricing interfaces.
Wanted to know what determines that a value for a particular conditon type within the pricing procedure is determined from an interface not the R/3 system you are working on?  Pl. exclude tax interface here but any other prices/Discounts etc

Just to clarify,  I understand that Condition interchange (EDI) is used to bring in prices from other SAP/non-SAP systems. It is for example used in standard condition types EDI1 and EDI2.
What I am trying to understand is the set up (configuration/Development) that is required for a custom condition type to be populated via EDI.  I see that the condition type has to be set up as manual in the pricing procedure-- what are the other requirements?

Similar Messages

  • I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

    I'm trying to read some XML data from temperature logger over my network.  I'm using LabView version 2009 sp1.  I'm using the URL Get Document Vi.  It works fine when using Internet sites like google or foxnews etc...
    When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document. 
    I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time.  When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time. 
    Is the URL Get Document Vi exceeding a timeout?  If so, where can I set it to wait longer?
    Attachments:
    Error 66.jpg ‏183 KB

    It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well.  Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
    Attachments:
    ex1.PNG ‏33 KB

  • Not able to get the Qualification data from BAPI

    Hi all,
    I am using a BAPI (BAPI_JOBREQUIRE_GETLIST) to get the qualifiaction data for requirement profile. It's working fine earlier but I did not get the qualification data from this BAPI, although the data is there in DB against this requirement profile.
    Can someone suggest me why I am getting this issue. I have looked into SDN and in BAPI documentation and found as below:
    "You require authorization (structural authorization) to read the Requirements subprofile."
    I am having the same User ID as I had before (when I getting back the correct data), so I don't think it should be authorization issue.
    Can someone help me out in this issue please.
    Thanks,
    Sanket Sethi

    Hi Shiva,
    It does not going to these includes at all. Message comes out with successfully done. The BApi is calling RHPP_COMMON_QUALI_READ inside, but this will not return any data. But if will call any qualification object ID, this BAPI will come up with data.
    So the QP type LO profile will not come up with any kind of data, but if we pass the OTYPE as Q and pass any Qualification object ID then the data will be returned.
    Is there any relationship or some other thing is missing? Any idea.
    Thanks,
    Sanket Sethi

  • I'm getting a "No Data From Device" error for older video import

    I'm trying to create digital video archives of some older (Hi-8) tapes before they turn to dust.  I've got a Sony deck with iLink and have been using iMovie, which is time consuming but error free.  I want to use the "Create Camera Archives" feature in FCP X, but am not able to import any video. FCP recognizes the deck, lets me control it and displays video in the capture window.  But it does not capture anything - camera archives are empty and when I try to import the video I get a "No Data from Device" message over the import window, as the video is playing in the background.  I thought it might be an issue of import settings... but I can't find any to change.
    Any advice appreciated. Thanks.

    Make sure all your settings are correct for capture and playback. Also make sure that the settings on the deck are the same as well. I know I had an issue when my Sony FX1 HDV camera was set to DV, FCP gave a similar error message.

  • How i cen get back deleted data from the bin?

    how i cen get back deleted data from the bin?

    Not once you have put the data in the trash and pressed the button to delete it.
    There may be some hope if you can understand what I am telling you in my first post to you.
    Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot.   There are no formal instruction manuals for Time Machine.
    Time Machine Tutorial
    Time Machine 101
    How to back up and restore your files           This in particular
    Time Machine Features
    Apple - Support - Mac OSX v10.5 Leopard Time Machine

  • TS1474 I have a new PC - great.  But the old PC has now gone and taken the backup of my iPhone 4S with it.  How do I get all my data from my iPhone to a new copy of iTunes on the new PC?

    I have a new PC - great.  But my iTunes library has now gone with the old PC.  With a new iTunes library how do I get all my data from my iPhone to a new copy of iTunes on the new PC?

    It has always been very basic to always maintain a backup copy of your computer.
    Have you failed to do this?

  • I lost my iphone. How can I get my saved data from back up on my new laptop?

    Dear Friends,
    I did a mistake as when selling my iphone I did not get my saved data from my iphone back up. Now I have a new laptop and I want to get my backed up data.
    Is there any way I could get or as Apples traditional greed ... more money more money ...more .. more??????
    Please help if I can get back my at least contacts and video for free. I do not are for my music. My God it is so difficult to get going with Apple.

    stedman1 wrote:
    A warranty does not cover physical damage. Did you have AppleCare +?
    AppleCare+ doesn't cover loss or theft, only accidental damage.

  • Variant must get the current date from the system.

    Hi All,
    I really appreciate your help on below please;
    I need to create a variant and schedule a report program once a day.
    But variant must get the current date from the system (sy-datum).
    The program should run for the values in the variant in schedule job run;
    Can I do this using SAP variants (for Report Program) and schedule the job.
    Many thanks
    Iver

    Standard functionality.
    http://help.sap.com/saphelp_nw70/helpdata/en/c0/98039be58611d194cc00a0c94260a5/frameset.htm
    Thomas

  • "Could not get the audio data from the file" error

    Hi
    I get a lot of "Could not get the audio data from the file" errors when opening a project. Sometimes they crash Premiere Pro CC 7.01 (Mac). But if not Premiere works as usual, with the audio.
    I tried to convert the audio files (coming from Audition) from 32 to 16 bit. It worked while opening a project once, but not the following times.
    Where can it come from ?
    Edit: I also get this error when importing audio: "Error: Premiere Pro version 7.0 is not compatible with the Premiere Pro Plug-in version 5.7.4". Maybe it is connected.

    Got it! It was the Smartsound plugin making trouble. Got rid of it and no more errors.

  • After upgradataion ,In testing phase- after search ,in result view we are getting some unwanted data ' +++++" should be added in Name .how to remove it.can you please help.

    Hi Team,
    After upgradataion ,In testing phase- after search ,in result view we are getting some unwanted data ' +++++" should be added in Name .how to remove it.can you please help.
    I want to remove ++++ in that column.

    Hi Kalpana,
    Please provide additional information for community users to relate this issue. Info like versions (old & new), the object which has this problem or component/view name will be useful to get the answers.
    Regards,
    Shobhit

  • Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    Is there any way to get specific app data from iCloud so that when you redoes load an app, you can restore its data?

    no.
    the backup is only for the purpose if you need to wipe the device.

  • Problem in getting the pricing data

    Hi all,
        I'm trying to create a service contract. When i do this, an error pops up saying 'Pricing data for Business Partner could not be found'.
        I've configured the pricing procedure for BP and created condition records as well. I even replicated the condition objects from R/3. Still I'm getting the same error.
    Can anyone help me out in this regard
    Thanks...
    Regards

    Hi, this problem can be located in various area's so I would need some more info from your side to determine the cause of it. I assume you have an IPC in you landscape? If so, did you test IPC's pricing functionlity from within the IPC? Did you replicate all your condition related information from SAP R/3? Have you successfully been able to find your BP pricing record in your condition table? Thanks, Tiest.

  • How to get/process the Data from XMLSocket?

    Hello All,
    I'm using Adobe Professional CS6, and Actionscript 3.0.
    To start with I have a C# program that basically just feeds data out from a Server in the form of XML data. I then have a Flash program that should receive the data and then I'll do some stuff with it. We had this working in Actionscript 1.0 but we need to upgrade the code to Actionscript 3.0, but instead of just trying to convert stuff over to the new  Actionscript version, I'm going to re-write the program.
    So far I've basically just defined some EventListeners most of which I found examples of online for using XMLSockets. As of now the Flash program will connect an XMLSocket to the Server that is feeding out the data, and the server feeding the data resends new data every 5-10 seconds or so.
    So when a grouping of XML Data comes in on the port I defined, the following Function gets executed for handling the incoming data. For my EventListener's Function for "socket.addEventListener(DataEvent.DATA, dataHandler);"  ("socket" is defined as --> var socket = new XMLSocket(); ). So when the new data comes in it executes the above function.
    The trouble I'm having is declaring a new variable of type "XML" and then using that variable to pull out individual "nodes/children" from the incoming XML Data. I found an example online that was very close to what I want to do except instead of using an XMLSocket to get data constantly streaming in they use the "URLLoader" function to get the XML data. I know I'm receiving the XML data onto the server because if I set the (e: DataEvent) variable defined in the function "head" to a string and then run a trace on that I can see ALL of the XML data in the "Output Window".
    But I can't seem to be able to set (e: DataEvent) to a XML variable so I can access individual elements of the XML data. The example I found (which uses the URLLoader instead) uses this line (myXML = new XML(e.target.data);)  to set the XML Variable, which won't work for mine, and if I try to do the same thing in my code it simply prints this for as many lines as there is XML data --> "[object XMLSocket]"
    MY CODE:
    *I left out the other Functions that are in my code for the EventListeners you'll see defined below, except for the one in question:
                             ---> "function dataHandler(e: DataEvent):void"
    import flash.events.IOErrorEvent;
    import flash.events.ProgressEvent;
    import flash.events.SecurityErrorEvent;
    import flash.events.DataEvent;
    var socket = new XMLSocket();
    socket.addEventListener(Event.CONNECT, connectHandler);
    socket.addEventListener(Event.CLOSE, closeHandler);
    socket.addEventListener(DataEvent.DATA, dataHandler);
    socket.addEventListener(IOErrorEvent.IO_ERROR, ioErrorHandler);
    socket.addEventListener(ProgressEvent.PROGRESS, progressHandler);
    socket.addEventListener(SecurityErrorEvent.SECURITY_ERROR, securityErrorHandler);
    var success = socket.connect('server.domain.name.local',3004);
    The code in this function was used from an example I found online as described above in the post: 
              LINK --> http://www.republicofcode.com/tutorials/flash/as3xml/
    // The Commented out code (*in blue) will show ALL the xml data inside the "Output Window":
    function dataHandler(e: DataEvent):void {
              // var myStr:String = e.data;
              var xml:XML;
              xml = new XML(e.target.data);  //<--- THIS DOESN"T WORK (I DONT THINK 'target' IS CORRECT HERE)??
              if (socket.connected)
                        // trace(myStr)
                        trace(xml);
    The Output from the line "trace(xml)" will show this data below in the "Output Window" (*FYI There should be 6 lines of XML Data on each 'update'):
    [object XMLSocket]
    [object XMLSocket]
    [object XMLSocket]
    [object XMLSocket]
    [object XMLSocket]
    [object XMLSocket]
    Could someone show or point me in the right direction on this. I want to be able to access specific parts of the incoming XML Data.
    Here's some sample XML Data:
    <MESSAGE VAR="screen2Display" TEXT="CSQ_1" />
    <MESSAGE VAR="F1_agentsReady" TEXT="111" />
    <MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
    <MESSAGE VAR="F1_talkingAgents" TEXT="333" />
    <MESSAGE VAR="F1_callsHandled" TEXT="444" />
    <MESSAGE VAR="F1_ABDRate" TEXT="555" />
    Any thoughts or suggestions would be greatly appreciated..!
    FYI:
    I'm VERY new to Actionscript/Flash Developing (*about a week now), so go easy on me haha...
    Thanks in Advance,
    Matt

    Hey Guys, thanks ALOT for the replies!!
    Andrei1 and Sinious,
    The code I show above is actually just what I found in an example online, and its what i was trying to show you what "they" used
    in the URLLoader example. I wasn't trying to use URLLoader, but it was the closest example I found online to  what I was trying to
    do in terms of processing the XML Data, and not how I read it in. So XMLSocket IS definetly what I'm trying to use because the Server
    I'm receiving the XML Data from "pushes" it out every 10 seconds or so. So yea I definatly want to use XMLSocket and not URLLoader...
    Sorry for the confusion...
    The example you show:
         var xml:XML = new XML(e.data)
    Is actually what I had in my original code but I couldn't get it to show anything in the "Output Window" using the trace() method on
    it, so I assumed I wasn't doing it correctly...
    What my original code was in the "dataHandler()" Function was this:
    function dataHandler(e: DataEvent): void
        var xml: XML = XML(e.data);
        if (socket.connected)
            trace(xml);
            msgArea.htmlText += "*socket.connected = TRUE\n"
        } else {
            msgArea.htmlText += "*socket.connected = FALSE\n"
    OUTPUT:
    And what I get when I run a Debug on it is, in the "msgArea", which is just a simple Text Box w/ Dynamic Text on the main frame it prints:
        "socket.connected = TRUE
         socket.connected = TRUE
         socket.connected = TRUE
         socket.connected = TRUE
         socket.connected = TRUE
         socket.connected = TRUE"
    It prints that message 6 times in the msgArea for each XML Message that comes in (*which I think 6 times because there
    are 6 "sections/nodes" in the XML Data). But then NOTHING prints in the "Output Window" for the "trace(xml)" command.
    Not sure why nothing is showing in the "Output Window", maybe the XML is not complete? But I could see data in the "Output
    Window" when I set "e.data" to a string variable, so I know the Data is reaching the program. Since I could see the XML Data in
    a string variable, does that mean I can rule out that the XML Data coming in is considered a "complete" XML Document?
    Because I wasn't sure if to be considered a complete XML Document it would need to have this included in the message..?
                        "<?xml version="1.0"?>"
    For the tests I'm running, one single XML message which is being pushed out from the server looks like this:
    <MESSAGE VAR="screen2Display" TEXT="Call_Queue_1" />
    <MESSAGE VAR="F1_agentsReady" TEXT="111" />
    <MESSAGE VAR="F1_unavailableAgents" TEXT="222" />
    <MESSAGE VAR="F1_talkingAgents" TEXT="333" />
    <MESSAGE VAR="F1_callsHandled" TEXT="444" />
    <MESSAGE VAR="F1_ABDRate" TEXT="555" />
    Would I need to include that "Header" in the XML message above?
                   i.e. "<?xml version="1.0"?>"
    Or do I need to be more specific in the trace command instead of just using "trace(xml)"?
    Also yes, I already have a Flash Policy file setup and working correctly.
    Anyway, thanks again guys for the replies, very much appreciated!!
    Thanks Again,
    Matt

  • Document/customer pricing and replication of pricing data from r/3 to crm

    Hi,
    can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
    once it is replicated  to crm what customization is require in crm.
    tel me abt customer and document pricing procedure, how it will be effected in the transactions.
    plz any one help me to know this scenarios.
    thanks
    kumar

    Hello Sathish,
    Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
    Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
    Easwar Ram
    http://www.parxlns.com

  • How i can get only required data from table by using CKM

    Hi...
    i have done one scenerio i.e get required data from one table into another table on basis of some condition by using CKM.
    Now i want same,but this time my target is file ,not RDBMS.
    so plz tell me procedure how i can get required data from source table into File on basis of some condition using CKM.
    thanks

    CKM checks for Constraints and Not Null condition. You can use IKM SQL to File and being that there is no option in IKM for CKM .
    The other method is you can declare those Not null and other condition as Filter in the Source Datastore, that should filter out records that you are not willing to move to files.

Maybe you are looking for