Development difference between BW 3.5 to 7.0 for FI Data sources

Hi,
Is there any difference in Delta handling  and Implementation of FI module especially for (GL, AP and AR) modules from BW 3.5 to BI 7.0.
I mean
1).Is there nay dependency is there while implementation like we need to implement GL before AR and AP  in BW 3.5 and that     dependency not there in BI 7.0
2). Delta handling difference between BW 3.5 to BI 7.0.
Please let me know.I have gove through teh links but i didn't understand properly.

Hi Kotha
OSS note says..
1. As of BW Plug-in 2002.2, selections by company code and fiscal year/period are also possible for the DataSources 0FI_AR_4, 0FI_AP_4 and 0FI_TX_4.
2. Now 0FI_GL_4, 0FI_AR_4, 0FI_AP_4 and 0FI_TX_4 can be loaded in any sequence
3. DataSources 0FI_AR_4, 0FI_AP_4 and 0FI_TX_4 can now be used separately without 0FI_GL_4
4. Partitioned data requests are then possible in the delta Init mode. The selections for the data requests in the delta Init mode are then also managed separately for each DataSource.
For more information please check https://service.sap.com/sap/support/notes/551044
Regards
Anindya

Similar Messages

  • Difference between Crsytal Report 2011 and Crystal Report for Enterprise 4

    difference between Crystal Report 2011 and Crystal Report for Enterprise 4.0?
    I think Crystl Reprt 2011 has more function, is it right?

    Hi,
    I recently attended a SAP Virtual trianing on SAP Business Objects BI 4.0.
    Here are few extracts from that which probably shows some light to you:
    SAP Crystal Reports 2011
    1. UI and associated processing servers remain the same as CR 2008
    2. Incremental update to CR 2008 with a few new features*
    3. Continue to provide current CR 2008 functionality as-is for existing customers
    SAP Crystal Reports for Enterprise 4.0
    1. Major update & redesign of the Crystal Reports Designer and associated processing servers
    2. Focus on streamlined report design, reporting against BI 4.0 Universe, & reporting against SAP BW data
    3. Provide the foundation for all future releases of Crystal Reports
    Differences between these two releases:
    Data Source & Usage Type                                       General Recommendation
    1. SAP BusinessObjects BI 4.0                                        SAP Crystal Reports Relational Universe (UNX) for Enterprise
    OLAP Universe (UNX)
    2. SAP NetWeaver BW 7 BEx Query (BICS)                    SAP Crystal Reports for Enterprise
    3. SAP NetWeaver BW 3.5 BEx Query                             SAP Crystal Reports 2011
    4. SAP Profitability Cost Management                              SAP Crystal Reports for Enterprise through Analysis View
    SAP Strategy Management
    SAP Budget, Planning and Consolidation
    SAP Extended Analytics
    5. Platform Driven Alerting                                                SAP Crystal Reports for Enterprise
    6. Business Views                                                           SAP Crystal Reports 2011
    7. Direct RDBMS or OLAP access                                    SAP Crystal Reports 2011
        SAP ERP/ Live Office Content/
        Enterprise search content
    Regards
    Gowtham

  • Differences between Oracle BAM and Oracle BI and Question BAM  Data Objects

    Hi,
    I have two questions.
    1. Can someone tell me differences between Oracle BAM and Oracle BI?
    My understanding about Oracle BAM is, we use BAM to build Dashboards or Reports.
    We can also build DashBoards or reports using Oracle BI.
    I am not able to understand why Oracle has two tools for same purpose?
    Which tool is more powerful and user friendly(Oracle BI or Oracle BAM)?
    2. Every time we plan to develop Dashboard or report in BAM, we need to create BAM ADC Data Object to store Data (i.e first step is to get data from external database or application and second step is to store data in BAM ADC data object).
    My understanding is we have an extra step(i.e creating Data Object) in Oracle BAM to develop a report or DashBoard
    I am wrong pl correct me?
    Regards,
    Shanti Nagulapalli.

    Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
    refer here,
    http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
    http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
    http://www.compuworks.com/events/view/233.pdf
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
    Thanks

  • Differences between archiving and inactivating a qualitative lookup within the Data Admin toolkit.

    Hi,
    Can you please let me know what could be the difference between archiving and Inactivating the Qualitative Lookup in Data Admin Tool Kit.
    Thanks,
    Rohini M

    When you inactive or archive something it is no longer available for selection.   The difference between inactive and archive is that inactive items will still appear available for searching purposes while archive items will not.  
    So lets say you have the following:
    List A
       - Item 1
       - Item 2
    List Items
    If you were to inactivate Item 1, end users would no longer see it available for selection when using the qualitative extended attribute.  However when they search for specs based on the extended attribute they would still be able to select Item 1 so they could find objects that used that value. If you were to archive Item 1, end users should no longer see it available for selection anywhere - including searching.
    Lists
    If you were to inactive or archive the entire List A, you would no longer see it available for selection when setting up qualitative lookup extended attributes.   I don't think there is anywhere you can search for extended attributes by lookup list currently out of the box so these would act similar.  If there was a place to search for extended attributes by lookup list then it would follow the same rules as above.

  • Difference between LIKP-VBTYP 'Returns' and 'Returns delivery for order'

    Hi...I have tried researching this myself, but still can't seem to get a good answer.  In the LIKP table, there is a VBTYP of 'H' for returns and 'T' for returns on delivery order.  I am trying to understand the difference between the two...how could you have a return with it NOT being on a delivered order?  Is there something basic I am missing? Any and all help extremely apprecated.

    Hi,
    I fully agree with the input given by Mr G Lakshmipathi.
    VBTYP as field description implies, it just says about the SD document category , but applicable to all documents such as order(includes outling agreements, inquiry,quotation as well) , delivery , billing.
    These values are inbuilt. wrt: document behaviour we use this doc category.
    You can even observe, doc category: K & O -
    K = Credit memo request  which applicables only in VA01
    O = Credit memo  applicables only in VF01.
    if you try to execute the table LIKP ( from SE16) with VBTYP=H, you will not get any doc's
    I hope it adds info.
    Regards,
    Reazuddin MD

  • Difference Between Adobe After Effects Standard and Pro for Mac

    Hi Gang
    Can anyone tell me the major differences between After Effects 7.0 'Standard' and 'Pro 7.0' for Mac?
    Thanx
    Mike

    AE 7 Pro contained additional features (such as motion tracking/stabilization) and plugins/effects that were not included in the Standard version.
    With the release of CS3, Adobe abandoned the Standard/Pro segregation - now there is only one professionally-featured After Effects.

  • Difference Between 720p30pn and 720p30p on HVX-200 for Music Video Shoot

    I'm shooting a music video on the HVX-200. I'm new to the camera and the manual offers little explanation as to the difference/advantages/disadvantages between 720p30pn and 720p30p recording format. I want to shoot VFR (variable frame rates) and mix it with the footage which I think only works with the 720p30p recording format.
    Does anyone know the differences/advantages/disadvantages of 720p30pn and 720p30p?
    As I'm going for the "film look" of 24fps, which setting on the camera do I use? I'm assuming that I use the 720p30 recording format setting and not the 720p24 as I'm obviously not outputting to film, but then again, I could be wrong.
    I do know when I was testing the P2 workflow that when I was doing the VFR (variable frame rate), it was unplayable even with rendering on FCP 5.1. I'm sure I had some funky disconnect between the recording frame rate and sequence settings on FCP. Does anyone know which recording format works integrating both footage shot at 1x and variable and what is the corresponding sequence setup settings on FCP?
    Thanks for the help.

    Why not shoot 720/24pNative for the "film look."
    With the default frame setting in the video or the film mode?
    You will mimic part of the "film look" out of the cam rather than addressing it in post, and you increase the amount of footage that can be recorded to a p2 card by recording only 24 frames rather than an over 60 recording.
    Play with the scene files for the look you want to add to the "film look."
    Remember that the shallow DOF characteristic of the "film look" can't be readily achieved with a stock HVX200.

  • What's the difference between iPod touch 4g and 5g exept for price and colur?

    What is the difference?

    I have heard that the new itouch 5 has different colours which is not the answer you are looking for. The new touch 5 has a flashlight like iphones. Also, there is siri, 5 columns and a new fixed app called passbook i think. It has a loop holder where you can hold your ipod like a necklace. In addition, the ipod 5 is much more thinner, faster, better camera, and the charger is different. It is about $299.
    The people who said there are no changes in ipod5, they are totally mistaken.
    Glad I could help and wish all my information was correct. (By saying that, I don't mean I made it all up

  • Hyper-V: Why difference between "Free Disk Space" and "Inspect Disk" for a VM (Guest OS is Windows 2008, 2008 R2, 2010, 2010 R2)

    I am trying to figure out the "Free Disk Space" on a VM on Hyper-V host.
    When I see the available space inside the VM, shown by Microsoft OS, it is less than, what is reported by the ‘Inspect Disk’ utility of Hyper-V Manager.
    Why this difference?

    Hi,
    Is it the exactly 10% free space when the issue occurs? Please run a chkdsk in CMD on that partition and see the size of available space matches the 10% - I'm thinking if it is actually full when a part of disk space is not calculated.
    In my test I created a 9.87GB partition and keep copy a 1GB file on it. Now it only has about 130MB free space but I can still add txt file with small size onto it. So what's the exact message you got?
    If it is a warning (but users can still add files onto it), please see if this will help:
    Description of the Low Disk Space Notification in Windows XP
    http://support.microsoft.com/kb/285107/en-us
    This can help us get rid of the Red Status when disk space running low.
    Also see this thread:
    Incorrect low space warning (red usage bar) in Computer
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/incorrect-low-space-warning-red-usage-bar-in/b42d61fd-9f5b-41d3-939a-83724aabab71
    If you have any feedback on our support, please send to [email protected]

  • Difference between 60hz and 120-240hz lcd monitor for gaming??   OT

    I don't have an apple display but have a 40" lcd tv. Does this higher Hz really help with motion and will it help with games that play at a higher Hz rate?
    After editing all day its nice to play a game now and then but there is one problem I have. *Ghost Recon* will not play on this lcd tv. Every other game I tried will work but I don't mess with those much. I just can't figure out why this one game will not work with this 60hz lcd tv.
    I can plug a dvi and sub-15 out of my *MDD G4* together into the monitor and then it will work. I have to mirror the monitors together to make it work tough.
    It's very odd that this will work even with the crt monitor off, but they both still need to be plugged in.
    So should I try to buy a 120hz lcd tv and see if that works but thats a $700 mistake that would be really bad to the budget.
    Obviously this is this game only. I borrowed a friends new Acer 22" computer monitior and put it on 60hz and the game played today.
    I really am confused about this.
    Thanks for the help
    Tony

    The way a 120 Hz monitor/TV works is to insert an interpolated image in between the two actual images that were passed to the display by the video source. Consider the example of a a ball in motion, like say you a watching a tennis match. Consider that 60 frames per second of video are being passed from the video source (computer, cable box, whatever...) to the display. In frame one, let's say the ball is at position A. In frame two, lets say the ball is at position B. So as rendered on the display the ball would appear to jump from A ---> B and the next frame to C, like A---> B--->C, etc.
    What a 120 Hz display does is insert extra images between frames one and two, and two and three and so on. In that case a "fake" image of the ball is computed by DSP and inserted between the other "real" locations so the ball moves like this: A->A'->B->B'-C, etc. so the appearance is smoother motion of the ball as the display is updated not 60 times per second, but 120 times per second.
    This would improve the appearance of motion in video games. The downside can be latency because there is a delay penalty that will occur from the required frame buffering and processing. You should probably find a dedicated game website and read up more about this kind of technology before committing $700 to it. And it won't make a game play that, for whatever reason, isn't currently playing on your system. So Ghost Recon isn't playing for some other unrelated reason.

  • Differences between sync, fullsync, and their eff varieties for messages

    I'm looking at messages to use in Application Designer and trying to understand some of the built-in ones. For example, I'm looking at LOCATION and see 4 different messages:
    1) LOCATION_FULLSYNC
    2) LOCATION_FULLSYNC_EFF
    3) LOCATION_SYNC
    4) LOCATION_SYNC_EFF
    What is the difference for each? Would like to know how it's done in PS so I can mimic them for other tables.

    Hi,
    The FullSync services are there to initially send over all the data, in your case the entire Location table.
    You should run this once, when initially integrating with another (PS) application.
    After this these services should be deactivated.
    The FullSyncEff services will only send over the data that is current on effective date, so only active locations at the moment, based on current date.
    You should run this once, when initially integrating with another (PS) application.
    After this these services should be deactivated.
    The Sync services will send data over every time a location is changed, added or deleted and are triggerd upon saving the page.
    These services should stay alive, to keep the environments in sync.
    Regards,
    Hakan

  • Difference between Print Immediately and Send to Spool for later print

    I'm having an issue in my R3 4.7 with printing.
    I have recently migrated to unicode, but I decided not to stick this into the Unicode section for now.
    The value of parameter rspo/host_spool/print is:
    /usr/local/bin/multiprint &P &F &C "&R" "&T" &c "&o" "&t" 2>&&1;
    This is the problem.
    If I have a print list and I decide to print it, I can send it the spooler for immediate print.
    That works fine, it comes off the printer.
    I see this in the dev trace file:
    COMMAND to execute is /usr/local/bin/multiprint cups_hwps01
    /usr/sap/<SID>/DVEBMGS00/data/000bC8f3.<SID>"MYUSERNAME" "" 1 "MYUSERNAME" ""
    Using Hostspool command: '/usr/local/bin/multiprint cups_hwps01
    /usr/sap/<SID>/DVEBMGS00/data/000bC8f3.<SID>1 "MYUSERNAME" "" 1 "MYUSERNAME"
    This is correct.
    Now, if I have a print list and select 'Send to SAP Spooler only for now' I can see it in SP01.
    However, if I try and print it from SP01 I see an error.
    There is an error in the STDERR2 file as follows:
    sh: -c: line 0: unexpected EOF while looking for matching `"'
    sh: -c: line 1: syntax error: unexpected end of file
    I see this in the dev trace file:
    COMMAND to execute is /usr/local/bin/multiprint cups_whps06
    /usr/sap/DTD/DVEBMGS00/data/000aocyn.DTD 1 "PH4417" "" 1 "PH4417" "
    Note the last ". It seems SAP is truncating the command it calls.
    I've logged it with SAP but wondered if anyone else had encountered it?

    Seems it was a Kernel bug.  Fixed.

  • JCO difference between SAP J2ee 620 and Webas 640 for Internet Sales

    Does anyone have some information on how Internet Sales manages JCO calls to R/3 or CRM on WebAS 640?
    Till J2EE 620 the sapjco.jar file directory had to be in classpath along with the relevant dlls in WinNt directory.
    WebAs 640 Java installation doesn't mandate any such steps.
    How does this work? The jar probably is in the cluster/server/bin/ext folder but what about the native libraries? How are they loaded.
    I am having problems making RFC calls to R/3 from a web application deployed on SAP WebAS 640.
    This is not the internet sales application but a general J2EE application and I was wondering if i could use the same approach as used by Internet Sales to load the native libraries.
    Any help would be appreciated.
    Bharat.

    Vivek,
        We have the WebAs 640 Java system running on a AIX server. I placed the following folder under classpath
    /usr/sap/<SAPSID>/JC**/j2ee/cluster/server/bin/ext/com.sap.mw.jco/sapjrfc.jar
    The error thrown is
    JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [Can't find library sapjcorfc  (libsapjcorfc.a or .so) in sun.boot.library.path or java.library.path
    sun.boot.library.path=/usr/java14_64/jre/bin
    java.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]. java.library.path [/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]
    The problem is a search on libsapjcorfc.* only return dll files and no .so or .a files.
    Wondering how ISA loads the native libraries on AIX!
    Thx,
    Bharat.

  • Difference between values of a single dimension is showing wrong data

    Hi ,
    I have a analysis , where I am displaying total revenue measure (in row) of all products agianst quaters dimension , scenario dimension (in col) . Scenario have two values - actual , budget ; variance (actual - budget) , I added by creating a calculated Item on Scenario column . Now the report looks like this :
    for Q1 : -
    revenue - > actual (523,263,250) budget (2,072,963,575,593) variance (- 496,053,029,268)
    But ,the figure of variance is showing incorrect value , it should be , - 2,072,440,312,343 .
    I tried sum , avg etc calculations ...all are coming in wrong figures ...
    Anything I am missing ?
    OBIEE version : 11.1.1.5
    data source essbase : 11.1.2

    Is that same behavior when you create a new column for variance in RPD?

  • Mapping between the info cube fields and fields in the data source in sap r

    In Bi7.0 in which database did the mapping between the Infocube objects and the datasource object will be store Here i have used the r3 system

    Hi,
    Chk table RSOSFIELDMAP.
    Regards,
    Gunjan.

Maybe you are looking for