Development environment for 'include' files?
My photo album program only has a single page. Each time you
ask for a new page
it calls itself, with a new set of parameters. Some of the
more complicated
pages are generated by setting up a framework (which
specifies the styles to be
used, among other things) and then loading an include file
into it.
Initially I envisaged these as being simple text files, but
inevitably some of
them became quite complex. Developing these in Dreamweaver is
quite a pain,
because it doesn't know about the CSS styles. I did try
making an HTML shell
file and pasting the include file into it, then cutting and
pasting it again to
save the revised version, but this proved to be cumbersome
and very error-prone.
Is there any way of telling Dreamweaver to load an
environment before loading
the include file?
Clancy
> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out.
No. It's only "applied" during Design-time viewing.
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
I guess I don't understand what you are referring to here
with "botched up
comment commands". A comment is a comment, and really does
nothing to the
page at all.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clancy" <[email protected]> wrote in message
news:[email protected]...
> "Murray *ACE*" <[email protected]>
wrote:
>
>>Use Design-time stylesheets.
>
> Thanks Murray,
>
> This seems to be about 90% of what I was thinking of,
but I gather that
> when you
> upload the file the hidden stylesheet remains attached
to the file, but is
> effectively commented out. However I guess that all that
has to be in the
> file
> is an 'include' statement (or perhaps this is what
actually happens), so
> it
> shouldn't lengthen the file noticeably.
>
> It is a pity that Dreamweaver doesn't include a
'compile' option which
> stripped
> out template and other Dreamweaver specific commands
(end_editable and the
> like)
> from the development file, leaving clean HTML. If this
were done it
> would mean
> that they could use Dreamweaver specific operations much
more flexibly,
> without
> having to worry about using botched up comment commands
to hide them from
> the
> browser.
>
> Clancy
Similar Messages
-
SDSoC development environment for Zynq SoCs and MPSoCs now available
Xilinx has announced the public access release of the SDSoC development environment for Zynq SoCs and MPSoCs. The SDSoC development environment provides a familiar embedded C/C++ application development experience including an easy to use Eclipse IDE and a comprehensive design environment for heterogeneous processing designs based on the Zynq SoC and MPSoC device families.
Sorry about the delay in responding. There isn't a document that spells out the bug fixes right now.
Briefly, the main fixes in 2.0.1 are around:
-Errors related to workspaces having spaces in the path
-Can't stop a server when there's a space in the domain path
-Difficult to create a server against a domain other than the default
-EPL syntax highlighting didn't work in some valid config files.
And a handful of smaller UI oriented fixes. -
Development Environment for Server APIs in Webcenter Interaction 10.3
Hi, I installed “Oracle Web Center Interaction 10.3" on standard environment mentioned by oracle (Window 2003 server, IIS6.0, SQL Server 2005). Everything works fine concerning the portal and services.
I also have visual studio 2005 on the same machine and trying to setup a development environment where I can user server APIs (I start with creating IPTSession).
I am using follwong code to start with:
/String serverConfigDir = ConfigPathResolver.GetOpenConfigPath();
IOKContext configContext = OKConfigFactory.createInstance(serverConfigDir, "portal");
PortalObjectsFactory.Init(configContext);
IPTSession ptSession = PortalObjectsFactory.CreateSession();
Problem: code compiles if I add few dlls, but it do not run, it throws following error
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
I think either server APIs are not more supported in 10.3 or I do not know how to setup the development environment for server APIs.
Can anyone help??i have already tried putting hardcoded path but it didn't help, morover the previous line gives me correct path.
I issue i mentioned seems to be related with some setting or missing native dlls
com.plumtree.openkernel.exceptions.OKFactoryException: Error in AOKFactory.createAndInitializeInstance, unable to create object with name 'com.plumtree.openkernel.impl.config.Config' in assembly or JAR file 'openconfig'.
i got follwing extract from the wsserver-wrapper.log file
INFO | jvm 1 | 2009/02/20 12:26:17 | 2-20-2009 12:26:17.606 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Loading config data from C:\bea\alui\ptws\10.3.0\bin\..\..\..\common/../settings
INFO | jvm 1 | 2009/02/20 12:26:18 | 2-20-2009 12:26:18.325 Info OpenKernel.Config Disabled-1235112977434 WrapperStartStopAppMain com.plumtree.openkernel.impl.config.providers.ConfigXMLFileProvider Setting subscription data.
INFO | jvm 1 | 2009/02/20 12:26:18 | container config context:EAS:wsserver
i didn't modified anything in any config file, just configured everything on one machine with oracle configuration manager -
Regarding the nomenclature for include files in SAP
Hi Group,
I am presently enhancing a tool for the upgrade thing .The tool is used to derive all the effected objects,so, for that i need to know the nomenclature for include files in SAP.e,g all the include files for table maintenance generator starts with LSVIM.so, we don't need to analyse that include files,so in the similar fashion i need to know nomenclature for include files....
Thanks,
Ajitabh AggarwalHi Group,
Basically i am working on developing an upgrade tool from 4.6/4.7 to Ecc 5.0/6.0,so for that i need certain information on include files.Basically i need to collect the affected zobjects whic i need to modify,So,for that i need to get the FUGR,FMs and includes which need to be corrected.e.g all deque and enque function modules are irrerelevant and similary includes starting with LSVIM and those that don't have function odules attached to them are for screen maintenance of tables.So, i need certain on inputs on that end.if u have anything,please do tell me.
Thanks in Advance.
Ajitabh Aggarwal -
Development environment for SharePoint 2013
Hi,
We have requirement for one of the project. Team size would be approximately 30 resources. Development would be entirely for SharePoint 2013 Intranet solution. this will be OOTB Intranet application. We will be developing InfoPath forms and Nintex Workflows.
For such requirement we would like to setup local development environment by using either Virtual Machines.
Can anyone help me to identify that how many VM's would be required for the same? How many simultaneous users can use and work at a time? What other things I need to consider for infrastructure? How can i suggest the best possible solution for this.
Thanks in advance.
Abhijeet KhopadeHi,
According to your description, my understanding is that you want to set up the environment for SharePoint Development.
Here is a detailed article about configuring development environment:
Setting up a SharePoint 2013 Development Environment
For VM count, it depends on your project development requirements, for VM license and management ,if you are using Hyper-V, I suggest you can create posts in Hyper-V forum:
Hyper-V forum
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Development environment for 10g R2
Guys,
I need to setup a development environment for oracle 10g r2 forms development. I am a new to oracle and due to downsizing we lost our DBAs so I am on my own and need your huge support.........
Current settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *
Secondly, I heard various stuff about development environment and would like your input as well:
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server where oracle is installed? *
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *
Please help me to resolve my confusion so I can present the development environment to my management.....
Thank you soo much...
-Raj
Edited by: user12236377 on Jan 28, 2010 10:55 AMCurrent settings: Oracle on the server: Oracle 10g R2
My local client installation: 10.1.0.4.2
Downloaded oracle developer suite from oracle: Oracle Forms: 10.1.2.0.2 (Developer suite 10.1.2.0.2)
* Is this a correct development environment? or any incompatibility do you see with this? *If you want to go with Forms 10G, i would apply the latest patch set (i think its 10.1.2.3, but would suggest to consult Metalink for that)
* Can I develop forms application from my own desktop, running OC4j from my local machine (came with developer suite) to run and develop forms? or do i have to develop on the server >where oracle is installed? *Yes, you can develop "locally" on your PC using only OC4J, but for integrationtests it might be useful to have an "test"-OAS (Oracle Application server 10.1.2)
* Does our oracle server needs any application server (weblogic) installed or just OC4j can work on the server to run forms production? *For running 10G forms in production you will need an OAS (Oracle Application server 10.1.2), not a WebLogic-server.
As an alternative to 10G, you could also start directly using Forms11G, which is the latest release. In this case you need a WebLogic-Server 11-installation both for development as also for production. -
Rising development environment for developers on Forms 11g
We installed Weblogic and oracle forms 11g on windows server. now we should allow our application team to develop and compile forms.
Oracle support claims that we should install on every PC Weblogic in order to make possible forms builder 11g installation.
We are looking for another possibility , because the proccess seams to be very complicated and waisted.
Does anyone know how to rise development environment for developers in Forms 11g?
Thank you.At this time, you are required to install Oracle WebLogic Server (WLS) in conjuction with Oracle Fusion Middleware (FMw) 11g (Forms/Reports). I agree that the process is more difficult that it should be, but if you use the My Oracle Support document, *"How to Install Fusion Middleware 11g Forms and Reports Only [ID 854117.1]"* as a guide, the installation is much easier. Note: You do need an account with My Oracle Support in order to access this document.
Also, because so many have complained about how "Heavy" the installation is for Forms 11g, Oracle is working on a "Lighter" install. Take a look at Grant Ronald's reply in the thread, Re: Forms/Reports 11g Builder without WebLogic. Unfortunately, there is no time table published when FMw 11g Release 2 will be available, but it is nice that Oracle has listened to our complaints and is working to address this issue.
Craig... -
Development Environment for G6
I am having problems creating a development environment for G6.
When I was using Plumtree 5.0, I installed a copy of the Portal on my laptop, installed the MSDE version of SQL Server, and everything worked fine.
Now, when I install G6, the Portal server fails on startup because it cannot connect to the database. I have no idea how to troubleshoot this further, since I can connect to the same database using Query Analyzer. The config tool test db connection feature gives me the same error as the portal server startup.
I noticed that 6.0 is only qualified for Windows 2003. Could this be the problem?
Thanks,
Tim HalbachMSDE isn't supported for G6 (nor was it ever supported, although it just happened to work). There were a lot of core engine changes, so the database access is no longer compatible with MSDE.
The workaround is to use SQL Server Personal Edition (also free). You're limited to 5 concurrent connections, but it works fine. -
Share the same SharePoint 2013 development environment for multiple developers
Hi,
We need our developers(more than 2) to use the same ''SharePoint 2013 development server' for different application developments. Their work should not affect each others(like application pool reset etc.). How this can be achieved ?
Thanks,,Hi Kalai,
Please check the following similar post suggested that each developer could deploy his dll file to each separated web application bin folder by setting Visual Studio property "Assembly Deployment Target" to "Web Application".
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7ee3858f-243c-4f43-a72d-3483ad1506f6/multiple-developers-debugging-on-different-web-apps-on-single-server?forum=sharepointgeneral
Thanks
Daniel Yang
TechNet Community Support -
Development Environment for SP9
Hello,
I need to create some web dynpros in EP 6.0 SP9+. I have eclipse, is there a plug in for eclipse that is compatible with SP9? And, what development environent would you suggest using for developing web dynpros.
regards,
TomHi Thomas,
It's on service.sap.com . Right now the website is down. If the website comes back up then i will post you the exact link.
Try the following link.
https://smpdl.sap-ag.de/~swdc/002007974700000089732005D/JIDE11P_1-10002804.SAR?_ACTION=DL_DIRECT
Message was edited by: Prakash Singh -
Proc*C/C++ suport for include files without .h extensions
We have written code C++ code which is Standard C++ ver 5.0 compilant. In this version of C++ compiler the files are without .h extensions. For example <iostream.h> is now to be reffered as <iostream>. We are facing problems in compiling this code with PCC compiler
Sample Code:
File test1.h
#ifndef TEST1H
#define TEST1H
#include<iostream>
#include<list>
class test
private:
int i;
public:
int k;
#endif
File test1.pc
#include <iostream>
#include<test1.h>
int main()
int i;
std::cout << "Enter a value :";
std::cin >> i;
std::cout << std::endl;
return 0;
When this code is compiled with Code=cpp CPP_SUFFIX=cpp PARSE=PARTIAL options we get the following errors
Pro*C/C++: Release 8.1.5.0.0 - Production on Fri Feb 1 12:46:00 2002
(c) Copyright 1999 Oracle Corporation. All rights reserved.
System default option values taken from: /oracle8/app/oracle/product/8.1.5/precomp/admin/pcscfg.cfg
Error at line 2, column 10 in file test1.pc
#include <iostream>
.........1
PCC-S-02015, unable to open include file
Error at line 3, column 9 in file test1.h
#include<iostream>
........1
PCC-S-02015, unable to open include file
Error at line 4, column 9 in file test1.h
#include<list>
........1
PCC-S-02015, unable to open include file
I guess so PCC compiler does not identify include files without .h extension.
LataDo you have the SUNWhea package on your system? This package contains the headers you seem to be missing. It's on the Solaris 8 CDROM 2 of 2. If you don't know how to add packages from the CDROM, look up "Adding and Removing Software After Installing Solaris 8" in the "Solaris 8 Advanced Installation Guide" on docs.sun.com.
-
Trial version of SAP J2EE engine and Development environment for Windows
Hello,
I am looking for a trial version of the SAP J2EE Development Environment and the corresponding SAP J2EE Engine for windows environment. I looked at the link https://www.sdn.sap.com/irj/sdn/nw-downloads. But the downloads are for the Linux environment. Are there any downloads for the Windows Environment.
Thanks for your help in advance.
Sumit Agarwal.Hi Sumit,
Currently trial versions of SAP NetWeaver 2004 and 2004s (7.0) are only available for Linux.
Java EE development environment (the latest Java EE version - 5) trial versions for Windows are available in the [SAP NetWeaver CE download section|https://www.sdn.sap.com/irj/sdn/nw-ce-downloads].
HTH!
-- Vladimir -
Recommend development environment for Adobe Drive 4
Looking at what is needed for Adobe Drive 4 and I wonder what the recommended development environment is.
Would this suffice:
Adobe Drive 4 SDK
OSX 10.7
Eclipse Juno 4.2 64Bit
JDK 1.6 64bit
Or should I be looking at 32bit versions?
And should I follow what was in the documentation which was older version, 3.6 of Eclipse for instance?Please take 32 bit application to set up you dev environment, especially, make sure JDK 1.6 32 bit is used.
Regarding Eclipse, 3.6 is recommended -
Got lost on Setting up a PHP development environment for Dreamweaver
I am following Dave Powers article on building a dynamic website. I am using Mac 10.6.7 and Dreamweaver CS5. I have downloaded Dave's example file and tried putting it on the desktop that didn't work. Next I tried dragging it into the website folder. That didn't work. Then I tried putting the php_test file into MAMP/hedocs and that didn't work. Where should the file go? I got to 2 green lights on the MAMP and can open the start page. The next step was to put in the time code which I did. It looks fine in design but when I click on "live view" it wants me to save the file. I save it as a php on my desktop. It then tells me I havn't specified a testing server. I have tried several ways of setting up the testing server. I set up the file name as :Local Testing---connect using: Local/Network---for the sever folder I have tried /Applications/MAMP/htdocs/php_test with web url: http://localhost/php_test/ . And I have tried it with: /Users/checkout/Desktop/php_test. Any ideas?
Thanks,
SheDon't have the pro version? That's unfortunate. catch-22 for you... can't get any $$ to buy tools for web development until you start getting $$ developing websites and can't develop websites until you get $$ to buy tools for web development.
You have no doubt learned by now through searching (and REsearching) that virtual host is a MAMP Pro feature. If you're too cheap/poor/whatever to afford $59 for MAMP Pro (but you somehow managed to afford the high price of Dreamweaver) then put your site files in MAMP's host location: Applications/MAMP/htdocs
You said in OP that you did something like that... that you put php_test file (presumably php_test.php with contents unknown to forum readers) in the MAMP directory and could not load the page by visiting http://localhost/php_test
That is probably because you did not specify the file extension in the localhost URL like this: http://localhost/php_test.php
How about this... what exact tutorial are you following (provide a URL) and what exact step in the tutorial are you having trouble with? Or try this: instead of php_test use index.php in htdocs directory. For contents of index.php put <?php phpinfo(); ?> then visit http://localhost and see what happens. -
Development environment for Case Management
Hi,
I want to get started with Case Management, but I could use some startup tips as this is the first time I am installing a Java environment from scratch. To be able to design and develop case management solutions, JDeveloper is required and it seems that there is a WebLogic server embedded in the JDeveloper installation. I can install the BPM extensions for JDeveloper and I have the support for Case Management. But is this enough to actually deploy and test a solution? Or does that require a stand alone weblogic+SOA suite installation? I would rather have all this figured out before I start installing all the different things.
ThanksAnd if you are starting to work with Case Management you probably will like this post at SOA & BPM Partner Community Blog: https://blogs.oracle.com/soacommunity/entry/case_management_samples_released_by
As well as this other references:
Oracle® Fusion Middleware Modeling and Implementation Guide for Oracle Business Process Management 11g Release 1 (11.1.1.7)
31 Working with Case Management
http://docs.oracle.com/cd/E28280_01/doc.1111/e15176/case_mgmt_bpmpd.htm#CIHJBBCA
Series of posts from the Oracle A-Team (start from the end of the list below):
Case Management In-Depth: Cases & Case Activities Part 2 – Case Rules
http://www.ateam-oracle.com/case-management-in-depth-cases-case-activities-part-2-case-rules/
Case Management In-Depth: Cases & Case Activities Part 1 – Acivity Scope
http://www.ateam-oracle.com/case-management-in-depth-cases-case-activities-part-1-acivity-scope/
Case Management In-Depth: Stakeholders & Permissions
http://www.ateam-oracle.com/case-management-in-depth-stakeholders-permissions/
Case Management Part 3: Runtime Lifecycle of a Project
http://www.ateam-oracle.com/case-management-part-3-runtime-lifecycle-of-a-project/
Case Management Part 2: Anatomy of a Project
http://www.ateam-oracle.com/case-management-part-2-anatomy-of-a-project/
Case Management Part 1: An Introduction
http://www.ateam-oracle.com/case-management-part-1-an-introduction/
Maybe you are looking for
-
I accidently deleted my "recently added" playlist. how do I get it back?
I'm very new to itunes and having trouble getting the hang of it. I was trying to clean up some playlist files and was attempting to delete songs I didn't want or need. I hit shift-delete and all of sudden EVERYTHING disappeared. the songs I had purc
-
Video from iPhone won't play on iPad
I received a video from iPhone in an email but iPad won't play it? Any way to get it to play on iPad.
-
Hi! gurus can i get links to download mm module training material
Hi! gurus I am madhu persuing MM module. Can u post me some links to find Training material for MM module
-
Firefox wants newer Flash player but my machine doesn't meet Flash 10.2 CPU speed
Just installed Firefox 3.6 and it says I need to update Flash player plug-in, but my machine doesn't meet the current Flash player 10.2 system requirements, ie for CPU speed. My CPU is 1.7 GHz. New Flash wants something like 2.4 GHz. I have 128 MB of
-
I just want to be able to use my phone, l thought maybe the battery was too low for it to finish loading so l plugged it in over night and it hasn't moved at all. What should l do?