Development environment set up

Hi,
  I just want to set up a development environment for ISA and was going through the Dev and Extension Guide. I have the following questions that I need help with:
a) What version of Developer workplace is required? Can I use the latest or have to stick with 2004s only for ISA development? I see there are two more later versions NW 7.0  SR3 Developer Workplace and NW 7.0 EHP1 SR1 Developer Workplace.
b) Do I need to have NWDI? I only intend to make changes on my laptop and test it. The server version will remain AS-IS.
Any inputs are greatly appreciated.
Thanks,
Ken

Thanks for you answers. I am trying to install the developer workplace on Windows 7 (64 bit OS) with SQL server 2008.
I get the following error
Running msiexec failed with return code 1603: Fatal error during installation.
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
I check some sdn posts on this error but the solutions refer to updating MSI installer on Windows XP. no solution to windows 7
Any ideas...?
Regards,
Reid

Similar Messages

  • Development environment for SharePoint 2013

    Hi,
    We have requirement for one of the project. Team size would be approximately 30 resources. Development would be entirely for SharePoint 2013 Intranet solution. this will be OOTB Intranet application. We will be developing InfoPath forms and Nintex Workflows.
    For such requirement we would like to setup local development environment by using either Virtual Machines.
    Can anyone help me to identify that how many VM's would be required for the same? How many simultaneous users can use and work at a time? What other things I need to consider for infrastructure? How can i suggest the best possible solution for this.
    Thanks in advance.
    Abhijeet Khopade

    Hi,
    According to your description, my understanding is that you want to set up the environment for SharePoint Development.
    Here is a detailed article about configuring development environment:
    Setting up a SharePoint 2013 Development Environment
    For VM count, it depends on your project development requirements, for VM license and management ,if you are using Hyper-V, I suggest you can create posts in Hyper-V forum:
    Hyper-V forum
    Thanks
    Best Regards
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • ISupplier - Setting up the Development Environment with JDeveloper 9.0.3

    Hi friends,
    Can you please tell me the steps involved in setting up the development environment for iSupplier Module with JDeveloper in my PC.
    Please give me the details about what are the files to be downloaded from Apps, folder structure for development environment etc...
    Gurus please reply ASAP.
    Thanks,
    San

    You should better pick the class files from the JAVA_TOP appropraite to that product and add it to either myclasses in your project in jdev or add it to the classpath.
    Once you have these required files then you can launch the pages by either using a test.jsp or use the xml files directly if you know what parameters to pass. I would suggest you to use a test.jsp and launch the first page in the flow which launches from the menu - function by picking it's web_html_call.

  • Correctly setting up a C++ development environment with clang++

    I'm going to reinstall Arch x64 soon, as the current installation was not done properly, and I have some doubts on how I should set up my development environment correctly.
    My compiler of choice is clang++ 3.4 SVN and my IDE of choice is QTCreator git.
    I currently get and install those manually, but I may use the AUR in my next Arch installation.
    Anyway, the issue is that QTCreator and other applications use /usr/bin/c++ by default, which is g++.
    To solve (horribly) the issue, I changed my /usr/bin/c++ to an executable bash script that fowards the arguments to clang++.
    This lead to issues such as warnings and errors not being catched by the IDE.
    My question is: what is the correct way to set up a clang++ development environment?
    How can I set clang++ as the default compiler for everything except AUR packages?
    If you use clang++ as your main compiler, how did you solve this issue?

    The canonical method of setting your (C++) compiler is to set the CXX environment variable.
    Searching Google for "qtcreator compiler" yields things like: https://qt-project.org/doc/qtcreator-2. … hains.html

  • Setting up the development environment

    hi,
    can anybody suggest the best way to set up the weblogic server
    development environment.
    we are a group of 5 EJB developers working on weblogic 7.0.
    (evaluation version)
    each one is developing ejbs which has to interact with other
    developer's beans.
    each one has installed the server on their own m/c. for developing and
    testing the beans.
    Once done, integration of the ejbs is done on another server and
    tested.
    should we use a single server for development? but that may lead to
    shutdown/ restart of the server frequently during testing and affect
    the other developer's work.
    anybody please suggest a better way.
    thanks in advance.
    anil

    On Tue, 05 Nov 2002 21:55:11 +0000, anil wrote:
    hi,
    can anybody suggest the best way to set up the weblogic server
    development environment.
    we are a group of 5 EJB developers working on weblogic 7.0.
    (evaluation version)
    each one is developing ejbs which has to interact with other
    developer's beans.
    each one has installed the server on their own m/c. for developing and
    testing the beans.
    Once done, integration of the ejbs is done on another server and
    tested.
    should we use a single server for development? but that may lead to
    shutdown/ restart of the server frequently during testing and affect
    the other developer's work.
    anybody please suggest a better way.
    thanks in advance.
    anilYour milleage may vary from others, here we had this environment setup for
    a 7 people developing WLS applications:
    - Single server for development (Sun Solaris box)
    - using remote telnet from Windows workstation/linux workstation
    - create a source code repository (e.g. CVS) for source code control and
    user workspace
    - create standard deployment descriptor with modular directory structures
    - system admin only allowed to startup and shutdown server
    - server running in "Development Mode" for hotdeploy and avoid shutdown
    and restart.
    Thank you,
    Neo Gigs
    "Follow the white rabbit..."

  • Setting up Oracle DB 11G in a development environment

    Hi
    I need to setup a new development environment with Oracle Database 11g and Oracle Apps Server 10G Forms and Reports.
    Currently we are running a live system (using Microsoft Virtual PC) on a domain and the virtual servers are joined to the domain.
    Where I want to get to with the new development environment is to be able to eventually move these new virtual servers to a completely new domain.
    What would be the best way to set this up to minimize the amount of work when setting up the database and apps server with the assumption that I will want to migrate the virtual servers to a new domain in the future. Would it be better to set up a basic workgroup and do the installation of both virtual servers in a workgroup environment?
    Also besides having security enhancements is there any advantage of having Oracle installed on a server versus installing on a Windows XP box?
    Many thanks.
    Spencer

    İf you first try to create db you get above errors, then you select "Create new objects in schema" option drop&create process starts.
    Result :
    TESTTYPEıD_TRG, CUSTOMOPTıONıD_TRG , ıSSUEVERSİONTYPEıD_TRG triggers are dropped and but not created again. ETESTPAGEID_TRG, TESTCASEATTACHMENTID_TRG, ATTCHSTDATA_TRG are newly created instead
    As I mentioned above after creation of ATTCHSTDATA_TRG, it throws an error and process stop. In additon, due to this error, all the dropped views are not created again.
    All my problem is newly created triggers an couldnt created views I suppose.
    Please advice
    thank you

  • Setting Up Shared Development Environment

    Is there any diagrams, white papers, guides or best practices on setting up the J-Developer and connecting to shared Services and database? The Developer guide (E10148.pdf) does not really cover what the standards is or the overall infrastructure of the JDeveloper and setting up a Shared Developer enviroment.
    I looking for something like http://docs.oracle.com/cd/E25178_01/fusionapps.1111/e15524/gs_install_e.htm but for (11.1.1.6.0) version webcenter.
    I basically looking for something to help me get our Shared Development Environment setup with Jdeveloper.

    The issue is connecting the Jdeveloper to the WebCenter DS and Activity DS schemas. In the Development guide it says I need to connect to these schemas to be able to utilize several of the WebCenter Services, ( http://docs.oracle.com/cd/E21764_01/webcenter.1111/e10148/jpsdg_svc_intro.htm#BHCDJHAI - 7.2.2 Setting Up a Database Connection
    We are trying to set up the connection to our shared development environment database. Our database group is concerned with giving developers access to these schemas. They are concerned that JDeveloper will changes or modify the schema and cause the database to fail. They created a account with read only access but we are not sure it this will work.
    I been trying to find anything in the documentation to find what access JDeveloper needs to the WebCenter DS and Activity DS schemas and if JDeveloper can modify these schema in any way.
    Additionally try to find anything on the best practices on connecting to a shared database and setting up a Development environment and its connection to Jdeveloper .

  • Setting up development environment with several projects

    We struggle with Workshop when having a large workshop application. One way of getting out of this issue was to use several deployments and to use WSRP as a mechanism to get resources from several deployed portlet applications. Performance isn't an issue for our deployment.
    This setup might help us with having smaller Workshop applications and making the development environment more efficient, but we see some issues with this.
    - Framework package
    How should we handle the framework part with CSS files. Duplicating these framework files is not a good solution since some developers most certainly will forget to update all framework files when editing them.
    - Portal Administration
    Can we just drop the portal administration web app in the most of the workshop application?
    - Data project
    We use a custom UUP. How should this be handled when splitting the workshop application into several smaller applications?
    Trond Andersen, Invenia AS, http://www.invenia.no

    I used this for a little different purpose; we wanted to generate the whole development environment at one mouse click (formsweb.cfg, reports server etc.); as we used ANT for creating the svn local working copy for each developer we used ANT for this. but you can also use perl or bash :D.
    I'd create one template, then loop through all directorys and append the configs to a temp file
    /var
         /you
         /not_you=> create one config section named as the folder in the temp file basing on your template.
    in your real formsweb.cfg you might append a line like
    # THE DEVELOPER CONFIGS STARTS HERE
    after that you locate your config-entries.
    when the temp formsweb.cfg is ready, simply delete everything after
    # THE DEVELOPER CONFIGS STARTS HERE
    and append the configs from the temp file.
    That's the way I'd do this ;)
    regards

  • Setting a new EJB + JSF development environment

    Dear friends,
    nowadays me and some friends are dealing with the task of define the a Java development environment for a big enterprise...
    After some discussion and also evaluating the available machinery (a Z/os mainframe, a DB2 database and some oter minor servers...) - we decided to use EJB + JSF/Servlets.
    The JSF 4.0/Servlets support web requests while the Mainframe bundle the business components (EJB 2.1).
    Is that correct?
    have you some advices about our first decisions ?
    the development tools will be also discussed but we are pending to Eclipse WTP and JBoss for local tests.. and also MAVEN and ANT to integrate all this bunch of technologies....
    do you have some tip about plugins or frameworks that could help us to design a confortable and productive office ?
    best regards,
    Felipe Ga�cho

    Hi Louis,
    Thanks for the swift reply and for the insight into how Jdeveloper initialisation operates. I have since added the "ojaudit -profilehelp" to the setup scripts so that the system folder is correctly initialised. However, it is still not helping with my problem :(
    The preferences.xml file is not getting created as part of the call. It creates quite a few other files, but not preferences.xml
    $ ojaudit -profilehelp
    Oracle JDeveloper Audit 11.1.1.4.0 (5923)
    Copyright (c) 2003, 2010, Oracle and/or its affiliates. All rights reserved.
    ADE version extension, using view: noshea_mos_test_view
    Defined profiles:
    Code Assist Rules
    All Metrics
    Compile Rules
    All Rules
    Javadoc Rules
    Audit Rules
    $ pwd
    /system11.1.1.4.37.59.23
    $ cd o.jdeveloper
    $ ls
    1.6.0_18-rev.jdk Default.kdf Eclipse.kdf applications.xml
    Brief.kdf DefaultWorkspace Emacs.kdf audit
    Classic.kdf Default_macosx.kdf VisualCPP.kdf ide.properties
    $
    I tried copying in a pre-created file, but i still see the same exception as before.
    At the moment, i am doing pretty much what the other team are doing in the make file :
    export JDEV_USER_DIR ; $(T_WORK)/jdevshiphome/jdeveloper/jdev/bin/ojaudit -profilehelp
    $(CP) $(NDE_PRODUCT_ROOT)/setup/preferences.xml $$PREF_FILE
    $(CHMOD) +w $$PREF_FILE;\
    Do you know how they generated the preferences.xml that they pick up from the setup directory? Maybe this is where im going wrong.
    The steps I follow to generate mine are:
    - Install Jdeveloper
    - Open jdeveloper, and use my audit profile as default.
    - close jdeveloper.
    - Copy the generated preferences.xml into my setup scripts.
    Then as part of the installation process
    - Install jdeveloper (using a script).
    - Run ojaudit -profilehelp.
    - copy the preferences.xml file into the o.jdeveloper directory.
    - Start Jdeveloper.
    Do I need to make some changes to this preferences.xml to somehow make it more generic before it can be reused.
    Thanks,

  • Error Page shown while runnning a Test page from Development environment

    Hi,
    I have set the development environment for JDeveloper with OA Extension.
    I completed the setup steps for "You are Customer,Consultant or Support Rep".
    I have created a new Database Connection for the DB server and obtained "Success" status on clicking "Test Connection" buton in the Dtabase Connection wizard.
    When I run the Test JSP(Tutorial.jpr),I get an error page.
    It shows following exception with a lengthy stack trace.
    oracle.apps.fnd.framework.OAException:
    Application: FND, Message Name: FND_GENERIC_MESSAGE. Tokens: MESSAGE = java.sql.SQLException: ORA-01003: no statement parsed
    A reply about solution for this issue would be of great help.
    Thanks,
    Gowtam

    FYI,
    Could not lookup message because there is no database connection
    Thanks

  • Serious performance issue with LV 7.1 Development Environment

    I'm posting this issue to the forums prior to submitting a bug report to ensure that the problems I'm having are reproducible. To reproduce this bug, you're going to have to be an advanced user with a large project (hundreds to thousands of VIs) as the performance problem is related to the number of VIs loaded.
    The issue is the increasingly poor performance of the LabVIEW 7.1 Development Environment as the number of VIs in memory increases. The actions affected include switching between front panel and diagram, saving a VI, copy and paste, clicking a menu, and the mysterious time spent (compiling? editing the runtime menu? changing the toolbar state?) between pressing the run button and when the code actually starts executing. Scrolling and, interestingly, copying via a control-drag are not affected. Running time of entirely on-diagram code does not seem to be affected.
    These problems are quite severe and significantly decrease my productivity as a programmer. Since they are development environment UI issues, it's been difficult for me to find a good example VI; the best I can do is the attached "LV Speed Test.vi". It doesn't test the issues that affect me most, but it seems to suffer from the same problem.
    This simple VI just shows and hides the menu bar 100 times in a tight for loop. When it is the only VI loaded, it executes in about 350 msec on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a single project-encompassing VI (let's call it the "giant") that references a total of about 900 user and VI-lib subVIs, the test routine takes almost a minute and half to run...about 240 times slower! I've tried this on my laptop with similar results.
    The problem appears to be related to the *number* of VIs loaded and not the memory utilization. For example, if I close the "giant", and create a new VI ("memhog") that does nothing but initialize a length 20,000,000 array of doubles and stores it in an uninitialized shift register, LabView's overall memory usage (as shown in the task manager) jumps enormously, but LV Speed Test executes in about 450 msec...only slightly slower than with a fresh copy of Labview.
    The problem seems to be related to excessive context switching. The Windows task manager shows over a thirteen hundred page faults occur when "LV Speed Test" is run with the "giant" in the background, versus zero or none when run by itself or when "memhog" has used up 160+MB of space.
    The problem only seems to affect the frontmost window. (Unfortunately, that's where we LV programmers spend all of our time!) If you start "LV Speed Test" and then put "giant" in the foreground "LV Speed Test" runs much faster. In fact, if you use the VI server to put the "giant" VI in the foreground programmatically at the start of "LV Speed Test", execution time drops back to 450 msec, and there are no page faults!
    These results show the issue is not related to video drivers or the Windows virtual memory system. My suspicion is that there is a faulty routine in LV 7.1 that is traversing the entire VI hierarchy every time certain events are thrown in the foreground window. It could be due to a problem with the Windows event tracking system, but this seems less likely.
    I have been programming LV for about 7 years and switched from LV 6.1 to 7.1 about four months ago. I know NI engineers have put thousands of hours developing and testing LV 7.1, but honestly I find myself wishing I had never upgraded from using LV 6.1. (To whomever thought "hide trailing zeros" should be the default for floating point controls...what were you thinking?!)
    I know each new version of LabView causes old-timers like me to grouse that things were better back in the days when we etched our block diagrams on stone tablets, etc., and honestly I'm not going to go back. I am committed to LabView 7.1. I just wish it were not so slow on my big projects!
    Attachments:
    LV_Speed_Test.vi ‏22 KB

    Hi,
    I can confirm this behavior. Setting the execution system to "user
    interface" helps a bit, but there is still a big difference.
    I get a feeling it has something to do with window messages, perhaps
    WM_PAINT or something, that is handled differently if a VI is not
    frontmost... But what do I know...
    Don't know if it should be called a bug, but it sure is something that could
    be optimized.
    Regards,
    Wiebe.
    "Rob Calhoun" wrote in message
    news:[email protected]...
    > I'm posting this issue to the forums prior to submitting a bug report
    > to ensure that the problems I'm having are reproducible. To reproduce
    > this bug, you're going to have to be an advanced user with a large
    > project (hundreds to thousands of VIs) as the performance problem is
    > related to the number of VIs loaded.
    >
    > The issue is the increasingly poor performance of the LabVIEW 7.1
    > Development Environment as the number of VIs in memory increases. The
    > actions affected include switching between front panel and diagram,
    > saving a VI, copy and paste, clicking a menu, and the mysterious time
    > spent (compiling? editing the runtime menu? changing the toolbar
    > state?) between pressing the run button and when the code actually
    > starts executing. Scrolling and, interestingly, copying via a
    > control-drag are not affected. Running time of entirely on-diagram
    > code does not seem to be affected.
    >
    > These problems are quite severe and significantly decrease my
    > productivity as a programmer. Since they are development environment
    > UI issues, it's been difficult for me to find a good example VI; the
    > best I can do is the attached "LV Speed Test.vi". It doesn't test the
    > issues that affect me most, but it seems to suffer from the same
    > problem.
    >
    > This simple VI just shows and hides the menu bar 100 times in a tight
    > for loop. When it is the only VI loaded, it executes in about 350 msec
    > on my machine. (2.4 GHz P-IV/640 MB RAM/Win2k). However, when I load a
    > single project-encompassing VI (let's call it the "giant") that
    > references a total of about 900 user and VI-lib subVIs, the test
    > routine takes almost a minute and half to run...about 240 times
    > slower! I've tried this on my laptop with similar results.
    >
    > The problem appears to be related to the *number* of VIs loaded and
    > not the memory utilization. For example, if I close the "giant", and
    > create a new VI ("memhog") that does nothing but initialize a length
    > 20,000,000 array of doubles and stores it in an uninitialized shift
    > register, LabView's overall memory usage (as shown in the task
    > manager) jumps enormously, but LV Speed Test executes in about 450
    > msec...only slightly slower than with a fresh copy of Labview.
    >
    > The problem seems to be related to excessive context switching. The
    > Windows task manager shows over a thirteen hundred page faults occur
    > when "LV Speed Test" is run with the "giant" in the background, versus
    > zero or none when run by itself or when "memhog" has used up 160+MB of
    > space.
    >
    > The problem only seems to affect the frontmost window. (Unfortunately,
    > that's where we LV programmers spend all of our time!) If you start
    > "LV Speed Test" and then put "giant" in the foreground "LV Speed Test"
    > runs much faster. In fact, if you use the VI server to put the "giant"
    > VI in the foreground programmatically at the start of "LV Speed Test",
    > execution time drops back to 450 msec, and there are no page faults!
    >
    > These results show the issue is not related to video drivers or the
    > Windows virtual memory system. My suspicion is that there is a faulty
    > routine in LV 7.1 that is traversing the entire VI hierarchy every
    > time certain events are thrown in the foreground window. It could be
    > due to a problem with the Windows event tracking system, but this
    > seems less likely.
    >
    > I have been programming LV for about 7 years and switched from LV 6.1
    > to 7.1 about four months ago. I know NI engineers have put thousands
    > of hours developing and testing LV 7.1, but honestly I find myself
    > wishing I had never upgraded from using LV 6.1. (To whomever thought
    > "hide trailing zeros" should be the default for floating point
    > controls...what were you thinking?!)
    >
    > I know each new version of LabView causes old-timers like me to grouse
    > that things were better back in the days when we etched our block
    > diagrams on stone tablets, etc., and honestly I'm not going to go
    > back. I am committed to LabView 7.1. I just wish it were not so slow
    > on my big projects!

  • Eclipse as a development environment with Jakarta Tomcat

    Hello:
    I am setting up the new development environment for my application (project). Below are the components involved::
    �     Eclipse 3.1
    �     myEclipse - EnterpriseWorkbenchInstaller_4.0GA_E3.1
    �     jakarta-tomcat-5.0.28 (Application Server)
    �     Sysdeo Eclipse Tomcat Launcher plugin - tomcatPluginV31beta
    �     SDK 1.4.2_08
    �     Microsoft XP sp2 operating system
    I have no issue with creation of project structure in eclipse IDE, compilation, and deployment, but there are some exception upon running the application.
    My project folder structure as follows:
    MyApplication/
    src/
    Conf/
    Web/
    classes
    taglib
    lib
    web.xml
    �     my application has few dependent projects, therefore I copied all the dependent projects final compiled classes (jars) to �lib� folder.
    �     I set all necessary classpath according to tomcat documentation.
    �     I created MyApplication.xml file under D:\jakarta-tomcat-5.0.28\conf\Catalina\localhost\ folder with the below context
    <Context path="/MyApplication " docBase="D:/xx/xxx/dev/src/ MyApplication/web" debug="0" reloadable="true" />
    �     I don�t get any exception during compilation and deployment process.
    �     I would greatly appreciate if you could give me a tips!!!!!!!!!!!!!!!!!!!!!!
    Error as follows:
    2005-10-10 17:31:45 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
    2005-10-10 17:31:47 StandardContext[jsp-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[jsp-examples]SessionListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]SessionListener: contextInitialized()
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Associated with Deployer 'localhost'
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Global resources are available
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: list: Listing contexts for virtual host 'localhost'
    2005-10-10 17:32:35 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
    java.lang.IllegalStateException: getOutputStream() has already been called for this response
         at org.apache.coyote.tomcat5.CoyoteResponse.getWriter(CoyoteResponse.java:599)
         at org.apache.coyote.tomcat5.CoyoteResponseFacade.getWriter(CoyoteResponseFacade.java:163)
         at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:122)
         at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:115)
         at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:190)
         at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115)
         at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)
         at org.apache.jsp.default_jsp._jspService(default_jsp.java:101)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    path setting as follows:
    %JAVA_HOME%\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Borland\AppServer\bin;C:\Program Files\CA\PEC\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\nls;%SystemRoot%\system32\nls\ENGLISH;C:\Program Files\Attachmate\E!E2K\;C:\Program Files\CA\AllFusion Harvest Change Manager;D:\jwsdp-1.1\jaxb-1.0\bin;D:\jwsdp-1.1\jwsdp-shared\bin;C:\Borland\classes12.zip;C:\Program Files\UltraEdit;D:\jakarta-tomcat-5.0.28\webapps\cst\WEB-INF\classes;D:\EPS\EB_CST_v3.7.2\dev\src\cst;%PATH%
    Classpath setting as follows:
    .;%third_pty%\xerces.jar;D:\EPS\EB_CST_v3.7.2\dev\src\cst;D:\jakarta-tomcat-5.0.28\webapps\cst;D:\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar;D:\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-ri.jar;%third_pty%\ant.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\dom.jar;D:\jwsdp-1.1\jwsdp-shared\lib\jax-qname.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-libs.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-xjc.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\jaxp-api.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\sax.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\xercesImpl.jar;%third_pty%\activation.jar;%third_pty%\ant-optional.jar;%third_pty%\j2ee.jar;%third_pty%\jakarta-regexp.jar;%third_pty%\jaxp.jar;%third_pty%\jcert.jar;%third_pty%\jnet.jar;%third_pty%\jsse.jar;%third_pty%\xalan.jar;C:\MSJDBSLib\msbase.jar;C:\MSJDBSLib\mssqlserver.jar;C:\MSJDBSLib\msutil.jar;
    Other IDE setting:
    As per tomcat documentation.

    Hello:
    I overcame the above issue by changing index.html to index.jsp, but now i am facing another issue as shown below:
    On top of the above change i too included j2ee.jar (from websphere) in the classpath to overcome the below issue, but even then i am getting the same error.
    Error as follows:
    javax.servlet.ServletException: Error instantiating servlet class com.metavante.cst.control.web.LoginMainServlet
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:996)
         at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:687)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:671)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
         at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:214)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:504)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    ----- Root Cause -----
    java.lang.NoClassDefFoundError: javax/ejb/EJBObject
         at java.lang.ClassLoader.defineClass0(Native Method)
         at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
         at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
         at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634)
         at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860)
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307)
         at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
         at java.lang.Class.getDeclaredConstructors0(Native Method)
         at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
         at java.lang.Class.getConstructor0(Class.java:1930)
         at java.lang.Class.newInstance0(Class.java:278)
         at java.lang.Class.newInstance(Class.java:261)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:987)
         at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:687)
         at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:671)
         at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:474)
         at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:409)
         at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:312)
         at org.apache.catalina.authenticator.FormAuthenticator.authenticate(FormAuthenticator.java:214)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:504)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)

  • Eclipse as a development environment with Jakarta Tomcat - Need help!!

    Hello:
    Subject: Eclipse as a development environment with Jakarta Tomcat
    I am setting up the new development environment for my application (project). Below are the components involved::
    �     Eclipse 3.1
    �     myEclipse - EnterpriseWorkbenchInstaller_4.0GA_E3.1
    �     jakarta-tomcat-5.0.28 (Application Server)
    �     Sysdeo Eclipse Tomcat Launcher plugin - tomcatPluginV31beta
    �     SDK 1.4.2_08
    �     Microsoft XP sp2 operating system
    I have no issue with creation of project structure in eclipse IDE, compilation, and deployment, but there are some exception upon running the application.
    My project folder structure as follows:
    MyApplication/
    src/
    Conf/
    Web/
    classes
    taglib
    lib
    web.xml
    �     my application has few dependent projects, therefore I copied all the dependent projects final compiled classes (jars) to �lib� folder.
    �     I set all necessary classpath according to tomcat documentation.
    �     I created MyApplication.xml file under D:\jakarta-tomcat-5.0.28\conf\Catalina\localhost\ folder with the below context
    <Context path="/MyApplication " docBase="D:/xx/xxx/dev/src/ MyApplication/web" debug="0" reloadable="true" />
    �     I don�t get any exception during compilation and deployment process.
    �     I would greatly appreciate if you could give me a tips!!!!!!!!!!!!!!!!!!!!!!
    Error as follows:
    2005-10-10 17:31:45 StandardContext[balancer]org.apache.webapp.balancer.BalancerFilter: init(): ruleChain: [org.apache.webapp.balancer.RuleChain: [org.apache.webapp.balancer.rules.URLStringMatchRule: Target string: News / Redirect URL: http://www.cnn.com], [org.apache.webapp.balancer.rules.RequestParameterRule: Target param name: paramName / Target param value: paramValue / Redirect URL: http://www.yahoo.com], [org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL: http://jakarta.apache.org]]
    2005-10-10 17:31:47 StandardContext[jsp-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[jsp-examples]SessionListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]ContextListener: contextInitialized()
    2005-10-10 17:31:47 StandardContext[servlets-examples]SessionListener: contextInitialized()
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Associated with Deployer 'localhost'
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: init: Global resources are available
    2005-10-10 17:32:27 StandardContext[manager]HTMLManager: list: Listing contexts for virtual host 'localhost'
    2005-10-10 17:32:35 StandardWrapperValve[jsp]: Servlet.service() for servlet jsp threw exception
    java.lang.IllegalStateException: getOutputStream() has already been called for this response
         at org.apache.coyote.tomcat5.CoyoteResponse.getWriter(CoyoteResponse.java:599)
         at org.apache.coyote.tomcat5.CoyoteResponseFacade.getWriter(CoyoteResponseFacade.java:163)
         at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:122)
         at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:115)
         at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:190)
         at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115)
         at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)
         at org.apache.jsp.default_jsp._jspService(default_jsp.java:101)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:462)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    path setting as follows:
    %JAVA_HOME%\bin;D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Borland\AppServer\bin;C:\Program Files\CA\PEC\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SystemRoot%\system32\nls;%SystemRoot%\system32\nls\ENGLISH;C:\Program Files\Attachmate\E!E2K\;C:\Program Files\CA\AllFusion Harvest Change Manager;D:\jwsdp-1.1\jaxb-1.0\bin;D:\jwsdp-1.1\jwsdp-shared\bin;C:\Borland\classes12.zip;C:\Program Files\UltraEdit;D:\jakarta-tomcat-5.0.28\webapps\cst\WEB-INF\classes;D:\EPS\EB_CST_v3.7.2\dev\src\cst;%PATH%
    Classpath setting as follows:
    .;%third_pty%\xerces.jar;D:\EPS\EB_CST_v3.7.2\dev\src\cst;D:\jakarta-tomcat-5.0.28\webapps\cst;D:\jakarta-tomcat-5.0.28\common\lib\servlet-api.jar;D:\jakarta-tomcat-5.0.28\common\lib\jsp-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-api.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-ri.jar;%third_pty%\ant.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\dom.jar;D:\jwsdp-1.1\jwsdp-shared\lib\jax-qname.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-libs.jar;D:\jwsdp-1.1\jaxb-1.0\lib\jaxb-xjc.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\jaxp-api.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\sax.jar;D:\jwsdp-1.1\jaxp-1.2.2\lib\endorsed\xercesImpl.jar;%third_pty%\activation.jar;%third_pty%\ant-optional.jar;%third_pty%\j2ee.jar;%third_pty%\jakarta-regexp.jar;%third_pty%\jaxp.jar;%third_pty%\jcert.jar;%third_pty%\jnet.jar;%third_pty%\jsse.jar;%third_pty%\xalan.jar;C:\MSJDBSLib\msbase.jar;C:\MSJDBSLib\mssqlserver.jar;C:\MSJDBSLib\msutil.jar;
    Other IDE setting:
    As per tomcat documentation.

    Need tips to solve this issue!!!

  • Using Oracle Database Express Edition in development environment

    Hi All,
    I have doubt regarding the usage Oracle Database Express Edition in Development environment. I am not sure weather I can ask a non technical question here or not. Pleas forgive me if I have done any thing wrong.
    I am working in an IT company where we take up projects outsourced by our clients. As part of our current project we are making some modification to a web application used by an institution. Our client is using Oracle Data Base standard edition. Due to budgetary constraints of our Company we can not set up a Oracle standard edition data base in our development environment.
    So would it be illegal if we use  Oracle Database Express Edition in our development environment?  We can guarantee that  only our internal development team which comprise a maximum of 10 people will have access to this development database and this development data base will never be opened to our Client for their business purpose(Who have their own Oracle standard edition in their environment). As part of the project we delver only table DDL script and stored procedure to our client and they put it in their environment.The sole purpose of a internal Express database will be development only.
    Could some one please tell me if it would be violation of license agreement if we install Oracle Database Express Edition in our development environment.

    Hi Paul,
    Actually I have already gone through the Oracle Technology Network Developer License Terms for Oracle Database 11g Express Edition . But was not quiet clear about the content. It says in the license terms that "We grant you a nonexclusive, nontransferable limited license to use the programs for: (a) purposes of developing, prototyping and running your applications for your own internal data processing operations". Does the term "your application" includes an application we are developing for another company. Since the Express database  is installed in the development environment only and is not opened to any one else not even for Our client it definitely falls under the term "internal data processing operations" right?

  • Hostnames with local web development environment

    I'm running the latest version of OS X Server 2.0.23 on Mountain Lion 10.8.2, and am trying to get set up to use X Server as a local web development environment.
    When I went through the steps of installing X Server, I used the hostname "jb.local". By enabling the websites feature, and pointing my browser to jb.local, I was able to see the default welcome page, and thought everything was going well. However, I can't figure out how to add additional hosts to this domain (i.e. drupal.local, or wordpress.local) without modifying my hosts file.
    Do I now need to setup DNS in the server and set my Mountain Lion client to use it or something, or is there some better way that I'm missing?

    When I was installing Server, it guessed the .local extension, (which we are using as the name of our local subnet) but not the whole hostname "jb.local". I added that myself. This machine is not registered as "jb.local" anywhere in our internal DNS.
    This confuses me because pinging jb.local correctly resolves to the internal IP address of this machine on our network. So how is this resolving?  There is no entry for this in my hosts file, and our internal DNS has no record of the hostname "jb.local".
    This hostname was invented during the installation of the Server app, so there must be some communication between this machine, and the server app, that is resolving this hostname correctly, but I can't find anything on it.

Maybe you are looking for