Development framework template

Hi Experts,
Can anyone help me in getting a template for the ABAP Development Process( or Development framework Template ) for an implementation project .If there is no template then help me in developing a template with details that are needed in this process.
Regards,
Amrutha.

Venky,
Send me an email at mailto:[email protected]
Are you in the states or abroad?

Similar Messages

  • Error while creating a Development plan template

    Hi Gurus,
    I am facing errors  while creating Development Plan Template.
    This is how it goes :
    When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
    In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
    Now after clicking next, I am adding 2 development areas :
    1) Training
    2) Mentoring,
    now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
    error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
    error2 : Value type 000000XXX of value class Q does not exists
    Warning 1 : You have maintained a description that is not displayed.
    In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
    Kindly let me know how to proceed further.
    Regards
    bharti

    Hi,
    Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
    But when I run the Concurent program and see the output,the output still shows me the old template.
    Regards
    Jujaar

  • Positioning problems develop with template

    I have been developing a template or templates for a site in order to make child pages, there will be some variations in these pages but would like them to remain as similar as possible and use the same style sheet if possible.  The overall page is simple and works OK but as the content variations solidify as does the css to accommodate it problems arise.  It starts as a body, wrapper, header (includes logo, and navigation table) left col, right col and a footer. I wanted to be able to have more than 12 thumbs and keep the page at 600px height so a scroll bar was needed. I put an AP div in the left column the full width of the col and the height of four thumb frames and the problems start, The heading over it cannot scroll with the content so it must be outside the AP div.  In a browser it drops under the table and its div. I went through all css rules for the assoc. divs  zeroing margins & padding, but it didn't work so I nested this AP div in another the full side of the left col. while that worked I don't Know why it moved in the first place, or why all the margin zeroing for the #leftColumn a  link, the #leftColumn and #content did nothing.  Is the Nested AP divs the way to go, and should I go back and take out all the margin and padding changes that did nothing?  the pages are athttp://www.thunderbirdtrading.ca/Test-1.dwt this is the page with the shift, and uses the first style sheet, the corrected page is Test-2 using the second sheet and the odd thing is that Test-3 views correctly using the third style sheet which doesn't have nested AP divs 
    http://www.thunderbirdtrading.ca/css/apparelHomeAP.css
    http://www.thunderbirdtrading.ca/css/apparelHomeAPNest.css
    http://www.thunderbirdtrading.ca/css/apparelItemsAP.css
    I would like to be able to change the left column table to 3 4 & 6 row tables (they are library items) to make different pages, also the right column block of text in Test-1 and Test-2 for the two column table in Test-3, is it advisable or possible to write css rules for different content appearing in the same div? That is one template making many templates by changing library items all using the same style sheet? Are there guidelines as to when to attach a second sheet?
    Thanks hope someone can shed a little light.
    CH

    Using APDivsions as your primary layout method is going to drive you crazy.
    http://apptools.com/examples/pagelayout101.php
    Try changing top value to provide some extra room between your logo and scrolling division:
    #apDivLeftCol {
        position:absolute;
        width:240px;
        height:405px;
        z-index:8;
       top: 250px;
        overflow: auto;
        left: 0;
        text-align: center;
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Application Development Framework

    Is there an application development framework for HTML5? Not the generic CSS and Javascript version where you build your own app, rather some kinda framework like Flex where everything gets embedded into the Canvas and javascripts gets cretade as you build your software.

    How about Adobe Edge Preview version?  It is free and you can have a basic tutorial from this link:
    <http://www.adobe.com/newsletters/inspire/november2011/articles/article2/index.html?trackin gid=JLRCV>
    Good luck and let us know if it helped.

  • Business Development Process Template

    Can anyone help me in getting a template for the Business Development Process in SAP.If there is no template then help me in developing a template with details that are needed in this process.
    Regards,
    Arun Krishnan.G

    First of all thanks for the reply.
    But this is not the one I am looking for.Once again I am repeating my question.
    I am working in a SAP platform oriented software firm and my company is going for ISO & CMMi Level3 certifications.Now I am a part of the QA department which is doing all the documentation work for achieving this.As you may aware of the different process areas like HR process,Finance process etc that comes under this.
    Business Development team, which is responsible for getting projects for a firm is an important one.So I am asking for a Process area documentation in Business Development.Please help in preparing this.
    Regards,
    Arun Krishnan.G

  • Getting error while configuring WAS 7 Fix Pack 37 with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0)

    Hi,
    I have installed Oracle Unified Directory 11.1.2.2.0 and WebSphere Application Server 7 with Fix Pack 37.
    I am getting error while configuring WAS 7 Fix Pack 37 (7.0.0.37) with Oracle Application Development Framework (Oracle JDeveloper 11.1.1.7.0). While adding products to cell (Oracle Directory Services Manager for WebSphere - 11.1.2.2.0), I am getting below error:
    CFGFWK-64069: The following prerequisites were found to be missing: Oracle WebCenter Composer Extension - 11.1.1.0
    Also attached the screenshot of the error.
    Please help.
    Thanks,
    Himanshu Verma

    Hello,
    ODSM has the following dependencies apart from ADF (both components depend also on ADF):
    - UIShell (oracle.idm.uishell.war)
    - Webcenter Composer (oracle.webcenter.composer.war).
    Apparently the composer is missing.
    Important points to check when using ODSM with WAS:
    - To install and configure Oracle Fusion Middleware with IBM WebSphere, you must first install (but not configure) IBM WebSphere
    - You must install the Oracle Application Development Framework as the same user who installed Oracle Unified Directory.
    - appdev must be installed under the same ORACLE_HOME as OUD
    Sylvain
    Please mark this response as correct or helpful when appropriate to make it easier for others to find it

  • Oracle Application Development Framework 11g Essentials

    Hi,
    I am planning to give Oracle Application Development Framework 11g Essentials exam but I could not find any Oracle Application Development Framework 11g Essentials certified.
    1) Is this exam has a worth?
    2) What is the importance of this exam?
    3) Why the number of Oracle Application Development Framework 11g Essentials certified is less, even ADF is getting popular?
    4) Should I have Practical experience of Oracle ADF mean everything that is part of exam?
    Thanks and Regards
    Nasir

    Hi,
    +1) Is this exam has a worth?+
    Its not an exam for the "ADF Essentials" edition but the essential ADF knowledge that is tested by this exam. Its the first part of a multipart certification
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=5001&get_params=p_exam_id:1Z0-554&p_org_id=&lang=
    +2) What is the importance of this exam?+
    As said, its the first in a series
    +3) Why the number of Oracle Application Development Framework 11g Essentials certified is less, even ADF is getting popular?+
    Less to what? Note that you can run your business on ADF without being certified. However, as a partner or consultant certification certainly is seen as a proof of your skill set
    +4) Should I have Practical experience of Oracle ADF mean everything that is part of exam?+
    Well, luck may be on your side and you could guess some correct answers. However. practical experience certainly is the better guarantee to pass the test
    Frank

  • Problems trying to develop a template using Fluid Grid Design

    Having serious problems trying to get a template to work using Fluid Grid Design with Dreamweaver CS6
    I have develop my template with editable regions etc, however when I load it to make an html5 page and preview it on any browser it comes completely blank
    If I do this on an HTML5 document without Fluid Grid it comes out fine.
    I heard this issue is happening to other people as well
    Need to resolve this issue as soon as possible
    Your help will be highly appreciated
    Mike Riego

    Before you create a template, you need to a) properly define a local site folder in DW. And b) test your prototype (Fluid Grid page) to ensure the code is valid and it works in all target browsers/devices.  
    When you're completely happy with your prototype page, SaveAs a DW Template and close it.
    DW will create a Templates folder in your local site folder for you.
    1. File > New > Page from Template > select your newly created template from the 3rd panel. Hit Create.
    2. This is a child page spawned from a Template.dwt.  
    SaveAs index.html. 
    Preview in browsers.  It should work just fine.
    Repeat Steps 1-2 for remaining site pages.
    Nancy O.

  • Unified Test Development Framework (Oracle Testware) available for 11gR1?

    Hi,
    found this article: http://blogs.oracle.com/testware/2009/07/introduction.html
    Is Oracle Testware available for 11gR1?
    I posted the question at the blog too but didn't get an answere.
    regards
    Peter

    Hello,
    ODSM has the following dependencies apart from ADF (both components depend also on ADF):
    - UIShell (oracle.idm.uishell.war)
    - Webcenter Composer (oracle.webcenter.composer.war).
    Apparently the composer is missing.
    Important points to check when using ODSM with WAS:
    - To install and configure Oracle Fusion Middleware with IBM WebSphere, you must first install (but not configure) IBM WebSphere
    - You must install the Oracle Application Development Framework as the same user who installed Oracle Unified Directory.
    - appdev must be installed under the same ORACLE_HOME as OUD
    Sylvain
    Please mark this response as correct or helpful when appropriate to make it easier for others to find it

  • IOS development framework

    I'm looking for an iOS development framework where it is possible to make an App using HTML pages like jQTouch: http://jqtouch.com/.
    Instead of adding the webpage as a bookmark on the home screen, I would like it to build a App for the App Store. Is that possible?

    Thanks, that's just what I wanted!
    Which UI framework would you then recommend? jQTouch, JQuery Mobile etc.?

  • Help in identifying best available development framework and language for native app development for Windows and mac osx desktops through single code base

    Hi Guys
    i am try to identify the right development framework and technology for developing GUI application which can run on windows and mac osx. 
    i am sure that there will be specific handling for both of these os, but at the same time there could lot of code can be same.
    is it possible to fulfill requirements of both these OS's through single code base. As of now i am more experienced with Dotnet C# on windows.
    Regards
    Mukesh Vashisth

    Just wanted to quickly confirm
    before i dive into xamarian.
    Is Xamerian can be Used to build applications for MAC and Windows PC along with mobile devices.

  • CSI Developement Framework

    Hi,
    I am working on "INstall Base" and the pages are built using CSI framework.
    There is nothing mentioned in the internet regarding CSI framework.
    My requirement is,
    In "Additional Attributes" page, there is a result table region.
    The columns displayed here are "Name", "value" and "Category".
    "Name" and "Category" columns are read only.
    But the "Value" is input type.
    Now according to my requirement, I have to modify this "Value" column as a "Drop Down List".
    I am able to achieve this by making the changes in "TableDescriptor.property" file.
    But for me, the values which are going to be displayed in Drop down list should be dynamic.
    As in depending on the "Additional Atibute" name ie "Name" column in the table region, the values in the Drop Down has to be changed.
    I tried lot of turn arounds but nothing worked out.
    Please reply as it is very urgent.
    Thanks in advance.
    Regards,
    Veena

    Pl do not post duplicate threads - CSI Developement Framework
    Srini

  • SOA Development frameworks

    Hi
    I am looking to complete SOA reference architecture with details on development frameworks for logging, validation, error handling, notification and others.
    Anyone could provide me some references and tips to get this information?
    Thanks
    Arun

    Download the Java SDK and a copy TextPad. Good enough for me.
    If you mean "I want to use a full blown IDE," get any current version of Visual Cafe, JBuilder, etc., etc. They all support Swing.

  • How to develop Framework Extension for join two tables

    Dear developers,
    My project contains more than 200 maintenance tables.
    Maintenance tables are very small and less than 100 lines.
    Maintenance tables mostly associated with a translation table.
    Translation tables are used for localized texts.
    Translation tables consists of Master Table Key + LanguageKey.
    I want to edit customizing tables only session language as single table.
    Translation table row may or may not be. Thats mean relationship is 1 to 0..1.
    ADF table control ignore this relationship.
    I tried view link between master view and detail view objects, but if translation table line is empty ADF table control throws translation iterator is null exception.
    I tried entity based left joined editable view I get view link inconsisty problem.
    In this case, the BC forcing me to framework extension.
    How is develop solution?

    topic is update

  • How to find out the developed Web templates with repect to the User?

    Hi All,
    Can anyone help me to find out the User specific web templates i.e
    How can we find that the User wise web templates.

    Hi,
    Thanks for ur replyyy
    Can u give a solution for this problem which is mentioned in the previous threads also..but not got the solution still...
    An error came while using Web Aplication Designer functionality.
    Can you please help me to resolve this issue.
    X person Developed a web template, but when Y person attempted to broadcast the associated query result, an error message returned indicating access was denied: part of error message Form: PHIO_GET_CONTENT_ACCESS of program SAPLSDCI.
    The same X person developed a web template, but when he attempted to broadcast the associated query result, an error message was returned indicating access was denied.
    From these test results it appears as though the errors encountered are authorization related. It is a requirement that web templates developed by X to be broadcasted.
    I need to understand what permissions the X person requires in order for this to work so that his access can be changed.
    Waiting for quick response.
    Can u give me solution for this problem that what needs to be done.

Maybe you are looking for