Development machine

Hello OTN Members,
I have a server box on win NT and Oracle 8.1.6, Portal 3.0 installed on it. I am planning to install Forms Developer 6i. My question is can I install form Developer 6i and forms Server on to this same box and for the development purpose can I access this site from some other machine by giving the URL like we can do for Portal. Or do I have to install form Developer on the development machine and forms server on this server box ?
I would like to know if somebody has come across with this kind of situation and would appreciate an urgent reply.
Thanks in advance....

Crystal Reports runtime info (including CR 11.5) is listed [here|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsforVisualStudio.NETRuntimeDistribution-Versions9.1to12.0]. The developer help file also contains good info on runtime distribution.
Note that CR XI r2 is not supported with .NET 2008. See [this|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsassemblyversionsandVisualStudio+.NET] wiki for more details.
Ludek

Similar Messages

  • Report using charts not work on non-development machine

    Post Author: ftsoft
    CA Forum: .NET
    using visual studio report uses charts.  works fine on development machine when I move the web app to a test machine which does NOT contain visual studio, the chart report does not worknote: other reports which only display data records work fine. the space where the charts should be displayed contain the following two lines CrystalReportViewer - CrystalReportViewer1 Error: Fail to render the page.  any help would be appreciated

    Solution suggested worked for me. 
    On my test server Crystal was trying to use the c:\temp directory to write the temporary images, my report always ran ok on the test server.  On the live server CRW was running under with the ASPNET account and / or my own user account. 
    I ran FileMon and filtered on the aspnet_wp.exe process across both servers and ran the application up to the point of generating the issue.  The FileMon output from the test server showed no issues we as the output from FileMon off the live server showed an access denied message.
    I gave access right to the relevant accounts on the relevant folders on the live server and the report ran fine.

  • Delete the existing sharepoint farm it is a development machinie and re create again in same server

    Hi
    i want to 
    delete the existing sharepoint farm it is a development machinie  and re create again in same server.
    because i am facing issues to configure user profile service, 
    the user profile syncronisation service starting and after some time its stopped.
    while i am reading http://www.harbar.net/articles/sp2010ups.aspx
    in current farm i given ip address for sql server while installing sharepoint
    you have not used a Fully Qualified Domain Name or IP Address when specifying
    the SQL Server when running the SharePoint Configuration Wizard (PSConfig). Using either is strongly discouraged,
    if i recreate the farm is it creates new databases in sql srver?
    adil

    1. Uninstall any custom / third party solutions deployed in server.
    2. from central admin, delete web applications along with DB.
    3. delete all service applications.
    4. From the program settings, un-install sharepoint.
    5. Go to SQL and delete if any DB from SP is left.
    6. Uninstall SQL, if you see any issue.
    These are high level reverse steps of the installation.
    Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

  • Deploy problem - CSS and overall look different on development machine

    Hi.
    My ADF app looks nice on my development machine. However, when I deploy it to weblogic server, CSS or something seems to be missing (for example, I lost nice textfield look)
    Did I forget to turn on some deployment setting?
    BR
    Edited by: user509804 on 22.4.2011 12:54

    chk for all the files...it seems u hv missed out on some css

  • J2SE or J2EE on development machine

    Hi,
    I am a newbie trying to find my way in the java SDK environment. I just read the part in the BO SDK development guide about setting up the development machine.
    However, some things are not very clear to me:
    Our BO XI R2 server is running with Apache Tomcat. On my development machine (which is on another computer than the BO server) I downloaded the Eclipse IDE. For this I need a Java installation.
    1. Do I need to download the Java J2SE or the J2EE from the Sun website on my development machine ?
    2. In the development guide they speak about deploying the JAR files. Do I need to copy the JAR files from the BO server on my development PC ?
    3. Set up your web application: must this be done on the development machine or on the Tomcat installed on the BO server ??
    Thanks for helping me out.
    Regards
    Sofie

    Hello Sofie,
    -As per your description, you are using kind of a distributed environment where your Application server is on one machine and your Business Objects Enterprise is on a separate machine.
    Following are the answers of your questions :
    1)Do I need to download the Java J2SE or the J2EE from the Sun website on my development machine ?
    >
    As far as executing a application from remote machine is concerned, I am not getting why you want to install Java.This is because Java is also get installed when you install Businees objects Enterprise(BOE).And this can be seen by going to the default installation directory of BOE.
    However if it is asking you to install Java,you can install it from Sun site.Make sure that Java version that you are going to install should be compatible with your BOE.
    2)In the development guide they speak about deploying the JAR files. Do I need to copy the JAR files from the BO server on my development PC ?
    >
    Yes.You have to copy all the JAR files from the location where you have installed BOE.
    Go to the path : BOEInstallationDirectory/Program Files/Business Objects/common/3.5/Java/lib and copy all the JAR files.You need to paste these JAR files inside lib directory of your client machine where your application is residing on.
    3)Set up your web application: must this be done on the development machine or on the Tomcat installed on the BO server ??
    >
    If you are using distributed environment, you can install Tomcat on client machine to connect it with server machine.
    Just make sure that there are no connectivity issues.This could be checked by typing following URL on client machine:
    http://servermachinename:8080
    Hit the above URL and determine if connectivity is done properly or not.
    Thanks,
    Chinmay

  • Weblogic 8.1 Development, Machine hangs

    Hi,
    I am new to Weblogic 8.1. My development machine is P4, 512 MB RAM. But system hangs when I try to develop/run applications in WebLogic 8.1. I have to run Weblogic Workshop, server . Is there any better pattern/strategy for development machines. Can we have the server on other machine and deploy our application remotely (during development) ?
    Please guide me.
    Jik

    Hi,
    Go through the following links and find the tunning parameters for JVM ,Weblogic Server & OS tuning parameters.
    http://e-docs.bea.com/wls/docs81/perform/index.html
    http://e-docs.bea.com/wls/docs81/cluster/overview.html#1003768
    Whatever information you want on weblogic server ,go through the following link and read the documentation.
    http://e-docs.bea.com
    Regards
    Anikumar kari

  • Clone a development machine taking old references

    Hi,
    We have clone or copied image of one virtual development machine. my intention was that i don't need to configure machine and also web application again and i can have multiple development environments.
    But when i try to cretae one new site collection in one of web application in new iamge. this new site collection is not opening and giving 503 error.
    i verified and found that the new site collection i create is in old environment, so new machine's sharepoint still refering old machine.
    can you please let me know how i can change reference. it is singleeton machine with database on same server.
    Thanks,
    Heerak

    Cloning is not supported for SharePoint by Microsoft. It can be achived but there will be lots of challenges especially when you have both the Environment running.
    503 usually comes when application pool is stopped, check the application pool on the clone server IIS and make sure it is started.
    check you Alternat Access Mapping - make sure it points to the new clone server.
    on CA, go to system settings --> manage servers in farm --> check the SQL server for configuration database, it must be pointing to the old server, create a SQL alias and point it to the clone serevr.
    but the best i'd recommend , copy
    and move all the databases to the new SQL server 
    install the sharepoint and  conncet to the configuration database using SQL alias.
    you 'll ge a new environment with same settings as old one and same data, you just might have to change some AAM settings.
    hope it helps !
    Thanks, Noddy

  • Different disk space alarms for development machines vs. production machines

    In vCOps 5.8 I used attribute packages to differentiate between production and development machines on alerting and monitoring for disk space alarms.  So if a production machine reached 95% utilization on a drive it would generate an alarm.  I set this up in an attributed package and assigned it to production machines.  I had a different attribute package assigned to development machines that would not create an alarm.  So when a production machine exceeded the 95% threshold I would get an email indicating I needed to take action.  I also had some different attribute packages assigned to some production machines that have chronically high disk space usage, but never reach the 100% utilization.  These wouldn't alarm at the 95% threshold but maybe at the 99% threshold.  In vROps I seem to have lost this ability which I'm not thrilled about.  It doesn't appear that you can set different monitoring thresholds for different machines.  So now after migrating to vROps I get alarms for development machines.  Is there anyway to setup different monitoring thresholds for different machines.  I know I could just put a development machine into permanent maintenance mode, but that doesn't really help me out with the ability to set different thresholds for production machines.

    Hi, rgcda.
    > Are you saying that I need to create new symptom definitions that I want to assign to development machines and then enable them in this specific policy in the Override Alert / Symptom Definitions?
    When you define a symptom that triggers over 95% of disk space usage, the default threshold value of the symptom will be 95.
    But if you want different threshold value of 99% for your development machines group with the same symptom definition,
    you don't have to define another duplicated symptom but just override(modify) the threshold value of original symptom to 99 in the policy edit screen.
    In other words, single symptom definition can have different threshold values in each policy.
    > Also for alert notifications would I have to create a new alert definition and enable it in is this specific policy?
    Nope, you do not have to create a new alert in this case.
    If a symptom threshold value changes via policy override, alerts which have that symptom will fire at different threshold value accordingly.
    > If I would have different symptom definitions for the same object are you saying I have to make the change in the KB you mentioned?
        For instance if I want the C drive to be a critical alarm when it reaches 95% on this machine and a critical when it reached 99% on a different machine.
    Nope, as you see in the above example, applying different threshold value to each machine can be done regardless of the metric you use is instanced or not.
    The KB is about treating a metric that has many instances for a machine and you may need it for disk space usage.
    Regards,
    Ho-Sung.

  • Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine

    Hi Dear SharePoint 2013 Experts,
    I request you to kindly guide like; the Correct No. of Accounts and their Privileges for Installing SharePoint 2013 Developer Machine. Is there any step by step blog or Video on "Installing SharePoint 2013 Developer Machine".
    Tried Installing ALL in one single Virtual Machine using account spDeveloper (which is a Member of "Administrators" and "Domain Admins" Group(s). Any kind of SharePoint Web-Application and/or Sites (Developer-Site, Team-Site, ....) can
    be created including MySites and Intranet Sites.
    But when tried creating SharePoint App Project in Visual Studio 2013 and deploying, stuck here with 2 weird Issues like;
    1. This task requires the application to have elevated permission
    2. Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action
    If Visual Studio 2013 is run NORMALLY (WITHOUT 'As Administrator'), it throws above 1st error  - "This task requires the application to have elevated permission"
    Because of the above 1st Issue, if the Visual Studio 2013 is run 'AS ADMINISTRATOR', it again throws an error (2nd error) - "Error occurred in deployment step 'Install App for SharePoint': The System Account can not perform this action"
    How to over cum this "chicken and egg problem"??
    Regards,
    developementsharepoint

    Hi, 
    Have you had a look at the TechNet guidance for configuring SharePoint and SQL on a single server? It's here: http://technet.microsoft.com/en-us/library/cc262243(v=office.15).aspx
    There is also a good TechNet wiki article on creating a SharePoint dev environment here,
    http://social.technet.microsoft.com/wiki/contents/articles/19178.sharepoint-2013-setting-up-a-dev-environment-one-piece.aspx and here http://social.technet.microsoft.com/wiki/contents/articles/15289.sharepoint-2013-creating-a-development-environment.aspx
    Regards, Matthew
    MCPD | MCITP
    My Blog
    View
    Matthew Yarlett's profile
    See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
    Upload and Crop User Profile Photos

  • Cannot setup windows 10 machine as developer machine

    I have just installed build 10074 and VS2015 RC on a new machine (not VM) and I am trying to start porting some of my phone and tablet apps to Windows 10 Universal. On starting VS2015 I get the message that the computer is not a development machine, and
    that I should switch it by going to Settings-Update and Security-For Developers but when I click on For Developers the Settings Panel closes and the machine has not been switched.
    This stops me from getting a developer license, and doing any development.is this a bug? Will it be corrected ASAP?

    PM
    Known issue in 74.  Did you read the known problems in the insider hub
    Wanikiya and Dyami--Team Zigzag

  • Running DAQ-9188 with LV13 runs great on developing machine not on target machine

    Hi
    Running DAQ-9188 with LV13 runs great on developing machine, built exe, transferred to new machine and I cannot get the values to update. Front panel opens everything looks good but no updated values, and no errors. Can someone help?  Thanks.

    Looks like others are pointing you in the right direction let me just add a few things.
    You must have a project to build an EXE.  You add VIs to the project and then under the Build Specifications in the project you can right click and create a new EXE build.  Here you must specify what the top level VI is which is the thing that gets ran when you run the EXE.
    After that you need to make an installer.  To do this go back to the project, and right click Build Specifications but this time make a build for the Installer.  Here you need to say what things to include in the installer.  You can choose to include the EXE you built earlier.  In addition to that under the "Additional Installers" section you can choose to add other installers.  The default one selected will be the run-time engine.  That thing you went and downloaded.  
    Other things you'll need depend on what is in your EXE.  Did you use DAQmx?  Then you'll need to include it in the additional installers.  Did you use XNET?  Include it.  Did you use Report Generation? Internet Connectivity Toolkit?  Vision?  VISA?  etc.
    It is some times hard to know what to include that's why in 2013 NI added a feature to try to can for things you used and include them.
    Including these things will balloon the installer.  Expect several GBs for the installer if you used DAQmx and other things.  Once these are installed on a new machine you can make an update installer that doesn't include these things, and just includes the updated EXE.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • How to install forms and reports 11g in developer machines

    Hi All,
    I have installed Database server 11.2.0.1.0 and installed application server forms(32bit) 11.1.1.4.0 separetely in two machine. Forms and Report builder working fine and connecting to the database.
    I have 5 Developers working in forms11g and reports11g .
    What i need to install in 5 developer systems.
    Please clarify at the earliest
    Thanks in Advance
    GV

    This came up awhile back, read the entire thing and make sure you use the same versions.
    Oracle 11g Developer suite installation
    Note that you will need to install Weblogic Server before you can install Forms 11g.
    Best Regards
    mseberg

  • Since updating to FF 11.0 it seems that every one of our development machines as well as personal machines no longer plays nice with Flash/SCORM for education..

    We have a client who uses a 3rd party application called Articulate to develop online learning courses. Those courses are then compiled and exported out to Flash. Everything works fine in IE and used to work in FF now on any machine with FF 11 it fails to post the users end score. We've tested it on FF 3.6 and it works fine. Is there a download link on the mozilla network where I can download and install 10, I'd rather not trust "oldapps" web sites.

    Hi James,
    Thank you for sharing your solution with us. It will help other users with a similar issue.
    Thanks,
    Preran

  • Crystal tries to access the printer on the initial development machine ...

    Post Author: duman
    CA Forum: General
    Hi,
    I have following issue:
    I developed many reports on my machine in Germany, by using a network printer.
    Now that the reports are approved, they are installed on a citrix machine in boston.
    Somehow loading of the reports in the citrix session took 3-10minutes, until the application poped up the parameter screen. After typing in the parameters opening the report took only view seconds.
    On my local machine I did not have this problem. The reports were loaded quickly. The behavior on 5 different citrix servers were the same like the described one (each loading delayed 3-10 minutes ).
    By tracing the processes in the citrix session I found out that the spooler.exe accessed my development printer in germany (shared printer \ slow network connection). The spooler loads the drivers on the server in germany, where the printer is.
    Why does crystal by loading a report access the printer on which I developed?
    Even if I change the printer in the pagepreferences of the report, crystal still tries to access my initial printer on which i developed. ??
    Can anyone help me on this?
    thanks
    Duman

    Well it seems from your error message that JDeveloper is trying to create this directory here:
    C:/Documents and Settings/cyounger/Desktop/jdevstudio10134/jdev/system/oracle.j2ee.10.1.3.42.70/embedded-oc4j/applications/datatags.ear
    This is probably failing because of the space in the path (i.e. Documents and Settings).
    So the question is why is it trying to create the directory there if your JDeveloper is installed elsewhere.
    I'm going to guess that you either have an environment setting pointing to this directory (maybe something like JDEV_USER_DIR) or it is because you upgraded from another JDeveloper install that used that directory. If this is the case I would suggest a fresh install of JDeveloper and to choose "NO" when asked if you want to upgrade from a previous installation.

  • Report not get generate through URL on Development machine

    Hi
    I have got development environment on machine where only weblogic admin is there [ No Forms/Report Services ]. Can I run run report on that machine through URL.
    I am using weblogic with Forms 11g [ 11.1.2.1.0 ]
    Thanks
    Vishal

    So, you are using 11g-Release2 with a "Development" installation type.  The part I don't understand is why you said you are using Forms 11, but then mention running a report through a URL.  Are you trying to call a report from a Forms application?  If not and you are simply trying to call a report from a URL directly in a browser, you may want to post your "Reports" question in the Reports forum, which is here:
    https://forums.oracle.com/community/developer/english/development_tools/application_development_in_pl_sql/reports
    Generally speaking, I see no reason why you wouldn't be able to run a report from a URL or from Forms.  Both should work.  Have you read the documentation?
    http://docs.oracle.com/cd/E24269_01/doc.11120/e24479/pbr_run001.htm

Maybe you are looking for