Development of Form for Returnable and Non-returnable material Gate pass

Dear Experts,
I am working with an Indian client impementing SAP PM. I need help in developing a form for Returnable and Non Returnable Gatepass. Requirements are below;
RGP/NRGP should be made for all materials going out of the factory, irrespective of it being coded or not
It should be plant specific
It should have reference to material movement document for tracking purpose
It should have details of vendor, transport company, vehicle number, permits if required, etc
A Z report should give details of all RGP/NRGP based on material document number and date
Please guide me based on your experience.
Thanks,
Boby

Boby,
This can be met. But before developing this, have you implemented the refurbishment process of PM module? This will really help in tracking the equipment and also for the development of RGP/NRGP.
First you have to create a form for the gate pass  and have to create an enhancement in MIGO for triggering the RGP/NRGP, else you can also create a separate Z transaction code for printing the Gate pass. You will get all the fields like vendor, material, QTY, movement type from the MIGO GI document. 
For the gate pass the MIGO document will be the reference all the times, you can also develop a Z report for the records for the gate pass.
Regards,
Praveen

Similar Messages

  • Need to demo to issue naterials on returable and non returnable basis,with

    Dear SAp Experts,
    please advise me that we need to demo to issue naterials on returable and non returnable basis,with refernce of service po and without PO ref in full cycle.
    Thanks
    Mohit

    Hi,
    Please check below link for the solution. Thanking you.
    Returnable & Non returnable material issue

  • Please explain me how I can use Form feed(\f) and Carriage return(\r)

    what is Form feed(\f) and Carriage return(\r)?
    Please explain to me.
    Thank you.

    These control characters aren't used much these days except that if you example a Windows or MSDOS text file in a binary editor you'll find each line ends with "\r\n". However when reading or writing text through classes these carriage returns will be added and removed automatically so your program doesn't see them.
    The controlls date back to teletype machines which operated rather like typewriters. Cariage return, as it's name implied, caused the print head to move back to the start of the line, line feed advanced a line (without, necessarilly, returning the carriage) and formfeed skipped to the next page.
    Newline on these machines was always "return, linefeed" because executing the carriage return on these machine could take too long. The early machines had only a single character buffer so that they had to executed the characters as quickly as they arrived. So doing the linefeed after the carriage return gave the carriage more time to return. On some teletypes if you did "linefeed, return" then the first character of the new line would often be printed somewhere in the middle of the line.
    This is the origin of the MSDOS/Windows end of line sequence.
    Many printers will still respect formfeed if printing is direct. Some will take carriage return without linefeed to allow you to start again overprinting the same line.
    However printing, these days, is seldom direct but done in bitmap form.

  • Invoice Posting using INVOIC02 Idoc for PO and Non-Po based invoices

    Hi All,
      We have a problem regarding posting Invoices using Idocs.
    We have po and non-po invoices coming frm thirdparty in the form of idoc files.
    We need a clarification whether Invoic02 idoc can handle both Po and Non Po Based invoices or threre are seperate idoc types or message types for Po and Non Po Invoices.
    Could any one give some inputs on Partner Profiles also for this senario.
    Please kindly reply as early as possible.
    Regards
    Anil Kumar K

    Hi
      I Got your name from this site.I would be very thankful if you can help me here.I am designing a EDI based invoice LIV.Is it possible to post some charges which are without PO reference but are coming in Vendor Invoices.Is it possible to post these kind of charges with EDI message INOIC01 or we have to post through FI posting.If possible through EDI in which segment of IDOC we will enter these charges with amt.Also is it possible to post credit memo also with EDI
    Thanks
    Sanjeev

  • Command+Return and Shift+Return keyboard shortcuts stopped working

    I'm using Firefox 4.0 on a 21.5" iMac running Mac OS X version 10.6.7. Just this morning, the command+return and shift+return keyboard shortcuts to auto-complete the .com and .net addresses of websites stopped working. Command+w still closes a tab, and command+left click still opens a tab in a new window. However, when I type anything in the address bar ("mac" for example) and then hit command+enter, Firefox opens up a new tab with a Google search for the word I typed. The address for this new tab is as follows:
    http://www.google.com/search?q=mac&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a
    Any idea what gives? I'm rather perplexed and frustrated.

    Just removed OmniBar and the problem went away.

  • Report for Excisable and Non Excisable vendor

    Hello
    Is there any Std report is there....it can give us the list of Excisable and Non excisable Vendors based on the Perticular Purchase Orgnisation.
    Regards
    sapman man

    Hi
    I do not think in SAP this kind of report is available.
    what you can do , if your vendor master has different  accounting group for Excisable and Non excisable vendor then you can check in standard table of vendor master like LFA1  and LFM1 or create Z report or Query.
    Awaiting your feedback.
    Kishor Rudani

  • Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

    Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • Different segment in same document for leading and non-leading ledger

    Hi,
    Is it possible to have different segments derived in the same document for Leading and Non-leading ledgers.
    Is there an exit where we can substitute the segment originally derived so as to update only in one particular ledger
    Please suggest.

    Thanks Alex for your response.
    But would it be possible to update the segment only in one ledger, the other one carrying the default values coming from profit center?

  • Material Design for bonded and non-bonded warehouse

    In some countries the materials put in bonded and non-bonded warehouse are treated differently, for example the cost, shipment, trace of the material.
    In general, there are two designs. One is "Only One Material Number", and the other is "Two material numbers".
    Which design you used?
    My client is in China.

    One material to extend it to two different plant, using evaluation class to diff the cost.
    cons are
    a. complex cost accounting for surcharge and freight distributed to material, not necessary for bonded-inventory
    b. MRP will combine the PR for bonded and non-bonded.
    two material ID
    solves the previous problem.
    cons are
    a. one material have two id, makes little sense
    b. big number of material, high volumn of data maintenance

  • Reg Excisable Material and non Excisable material. Billing and delivery....

    Dear Experts,
    Greetings!!!
    Here I am using TAXINN; my client is doing business excisable material and non excisable material.
    He received the order from his customer both excisable material and non excisable material in Single PO.
    At the time of delivery he needu2019s non- excisable and excisable material would be separate delivery documents.
    He is not ready to do manually selection in out bound delivery.
    In this process what should I need to configure.
    Please do need full.
    Prasad.

    Hi Laxmipathi Garu,
    Yes , we are not using trasportation group.
    I will follow as you suggested.
    I will copy the same routien, there i will write programme, when ever delivery is going to save, then system slpit two delivery documents, one for excisable material, second non excisable material.
    If i am doing wrong please you can correct me.
    Once i done this, let you know.
    Thanks,
    Prasad.

  • Validity and non-validity material

    hi frnds
    what is validity material and non-validity material ?
    regards

    Hi Santosh,
    Please go through this SAP help it may not give you Exact answer for your quiery but you can get some idea on Material validity.
    http://help.sap.com/saphelp_47x200/helpdata/en/f3/7c8fe6a39411d19daf0000e8323350/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Difference between stock and non stock material

    what is the difference between stock and non stock material. example of stock and non stock material?

    Hello,
    Stock Material
    Material that is constantly kept in stock .A stock material has a material master record and is managed on a value basis in a material stock account.
    Ex: Raw Material.
    Non-stock Material
    Material that is not held in stock because it is consumed immediately.
    Ex: Office Stationary.
    You need to create purchase order and accounting document for payment but the stock balance is always zero as it is issued out immediately to the various department.
    Prase

  • I have office for mac and my return button just keeps on takeing me to the next page as does any letter. I can only basicaly do one line, please help?

    I have a macbook pro and my return key keeps on taking me to another page, I can only basically do one line per page can anyone help?

    Office is a Microsoft application and your issues may be best handled at their web site support.

  • Search Example Code inside for Versioned and non-Versioned Documents

    These may be of use to someone...
    File names:
    AttributeSearch.java
    AttributeContentSearch.java
    The AttributeSearch application will search for documents (both versioned and non-versioned) with a file name containing "txt", residing in the user "system"'s home directory.
    The AttributeContentSearch application will search for documents (both versioned and non-versioned) with a file name containing "txt", and document content containing the word "hello", residing in the user "system"'s home directory.

    import oracle.ifs.beans.LibraryService;
    import oracle.ifs.beans.LibrarySession;
    import oracle.ifs.common.CleartextCredential;
    import oracle.ifs.common.ConnectOptions;
    import oracle.ifs.common.IfsException;
    import java.util.Locale;
    import oracle.ifs.beans.DirectoryUser;
    import oracle.ifs.beans.PrimaryUserProfile;
    import oracle.ifs.beans.PublicObject;
    import oracle.ifs.beans.Document;
    import oracle.ifs.beans.Folder;
    import oracle.ifs.beans.ContentObject;
    import oracle.ifs.beans.Search;
    // SEARCH RESULT
    import oracle.ifs.beans.SearchResultObject;
    // CONTENT + ATTRIBUTE SEARCH
    import oracle.ifs.search.ContextSearchSpecification;
    // SELECT, FROM
    import oracle.ifs.search.SearchClassSpecification;
    // ORDER BY
    import oracle.ifs.search.SearchSortSpecification;
    // WHERE
    import oracle.ifs.search.SearchClause;
    import oracle.ifs.search.SearchQualification;
    import oracle.ifs.search.JoinQualification;
    import oracle.ifs.search.FolderRestrictQualification;
    import oracle.ifs.search.AttributeQualification;
    import oracle.ifs.search.ContextQualification;
    public class AttributeContentSearch
    public static void main(String args[])
    try {
    LibraryService ifsService = new LibraryService();
    System.out.println("Oracle iFS Version " + ifsService.getVersionString());
    CleartextCredential credentials = new CleartextCredential("system","manager");
    ConnectOptions options = new ConnectOptions();
    options.setLocale(Locale.getDefault());
    options.setServiceName("ServerManager");
    options.setServicePassword("ifssys");
    LibrarySession ifsSession = ifsService.connect(credentials,options);
    DirectoryUser thisUser = ifsSession.getUser();
    System.out.println("Connected as \"" + thisUser.getDistinguishedName() + (thisUser.isAdminEnabled() ? "\" (admin enabled)" : "\""));
    PrimaryUserProfile userProfile = thisUser.getPrimaryUserProfile();
    SearchResultObject[] sro = runSearch (ifsSession,"hello");
    if (sro != null)
    for (int i = 0; i < sro.length; i++)
    System.out.print (((PublicObject)sro.getLibraryObject()).getName());
    System.out.println (" (" + ((PublicObject)sro[i].getLibraryObject()).getId() + ")");
    } catch (IfsException e)
    public static SearchResultObject [] runSearch( LibrarySession ifsSession, String searchCriteria) throws IfsException
    ContextSearchSpecification ss = null;
    SearchClassSpecification scs = new SearchClassSpecification();
    SearchSortSpecification sss = new SearchSortSpecification();
    SearchQualification sc = null;
    ss = new ContextSearchSpecification();
    ss.setContextClassname(ContentObject.CLASS_NAME);
    scs.addSearchClass( PublicObject.CLASS_NAME );
    scs.addSearchClass( Document.CLASS_NAME );
    scs.addSearchClass( ContentObject.CLASS_NAME );
    scs.addResultClass( Document.CLASS_NAME );
    sss.add( Document.CLASS_NAME, "NAME", true );
    sc = buildSearchClause( ifsSession, searchCriteria);
    ss.setSearchClassSpecification( scs );
    ss.setSearchQualification( sc );
    ss.setSearchSortSpecification( sss );
    Search s = new Search( ifsSession, ss );
    s.open();
    SearchResultObject [] sro = s.getItems();
    s.close();
    return sro;
    public static SearchQualification buildSearchClause( LibrarySession ifsSession, String searchCriteria ) throws IfsException
    Folder f = ifsSession.getUser().getPrimaryUserProfile().getHomeFolder();
    FolderRestrictQualification frq = new FolderRestrictQualification();
    frq.setStartFolder( f );
    frq.setSearchClassname(PublicObject.CLASS_NAME);
    AttributeQualification aq = new AttributeQualification();
    aq.setAttribute(Document.CLASS_NAME, PublicObject.NAME_ATTRIBUTE);
    aq.setOperatorType(AttributeQualification.LIKE);
    aq.setValue("%txt%");
    ContextQualification cq = new ContextQualification();
    cq.setQuery(searchCriteria);
    cq.setName("Test0");
    JoinQualification jq1 = new JoinQualification();
    jq1.setLeftAttribute ( Document.CLASS_NAME, Document.CONTENTOBJECT_ATTRIBUTE );
    jq1.setRightAttribute( ContentObject.CLASS_NAME, null);
    JoinQualification jq = new JoinQualificatio n();
    jq.setLeftAttribute ( PublicObject.CLASS_NAME, PublicObject.RESOLVEDPUBLICOBJECT_ATTRIBUTE );
    jq.setRightAttribute( Document.CLASS_NAME, null);
    SearchClause sc;
    sc = new SearchClause(jq, jq1, SearchClause.AND);
    sc = new SearchClause(sc, cq, SearchClause.AND);
    sc = new SearchClause(sc, frq, SearchClause.AND);
    sc = new SearchClause(sc, aq, SearchClause.AND);
    return sc;
    null

  • Reg: Report on GR Returns and IR Returns with PI 2005.1 700

    Hi,
       I would like to report on GR Returns and IR retuns from Purchasing Datasources i.e. 2LIS_02_SCL(total returns).
       I created GR with 101 movement and GR with 102 movement. I checked in RSA3, i could see data with Procecs Key 002. But, i don't see any entry with process key 006. <u>Does any body investigated how these process keys attached to document changes? am i missing some thing?</u> I can able to calculate Actual Delived Qty and Invoice Qty, but i could't able to calculate total GR and IR Returns?.
    We are on ECC 6.0 and PI 2005.1 700 and BI 7.0 .
    Does any body have any idea about this.
    Note: as of now i don't want to look into IM for return quantity. we don't have any Plans to implement IM.
    Thanks in advance!
    Nagesh Ganisetti.

    Chetan,
       Both notes won't help... as you didn't understood my Issue. I was able to get actual Delivered or Invoiced Qty or Values. 1st won't help in my Case (This note is for how to calculate Invoice or GR value with Current Exachnge Rate instead of Original Exchange Rate).
    I did all the settings for Purchasing. Some reason i couldn't able to generate any Entry with Process Key '6' or '7'.
    Any idea where these process keys attached to these Documents. I want to debugg this, as you know i need to debugg while filling setup tables.
    I would be very happy if you can share any Document on BI Objects Naming Conventions (Query or Cube or any BI Object).
    Nagesh Ganisetti.

Maybe you are looking for