Development on a database server or work on the engine ?
Hello,
Which is the interest to make development on a database server, compared to a repatriation of data in an environment of dedicated development, where one intervenes directly on the engine of the language of development?
Thank you for your answer.
I don't know the official answer but given my familiarity with the vhdx format in hyper-v, unless you have a specialized application to index it, I doubt the built-in windows indexing service can do anything to optimize file searches
having said that, when users login and the UPD file is mounted, you may be able to index it from the RDS server instead but I don't know what kind of performance hit you would see
Similar Messages
-
My incoming mail server stopped working for the 3rd time Help?
This is the third time my incoming mail server stopped working any suggestions on how to repair this?
Thank You!If Apple replaced the logic board three times for the same issue, and the third board has now broken for the same reason, you may be able to ask Apple for a replacement machine. You're out of warranty, and Apple is under no obligation to do anything for you (unless the current logic board was replaced by Apple less than 90 days ago in which case it's still under warranty), however, as a good will gesture, they may be willing to exchange your system for another one. You can start at the Apple store or call Apple customer care directly.
-
Has anyone got the saaj or server service working in the coffee break app
i get both FAIL - Service could not be started at context path server and saaj-coffee-break, is there any obvious thing it could be
i build the common first
then i build the jaxrpc service and publish it in registry
then i build and install the saaj service, but it fails to start in tomcat manager
same with server.
i use tomcat and j2sdk1.4 -
Form auto query works in 10g developer, but not when served by forms server
I have a form with a master and two detail blocks on the same canvas. When I run it from the developer tool on my desktop, it works great, the master block populates as expected based on the GO_BLOCK and EXECUTE_QUERY statements, and the detail blocks both populate automatically, firing their POST_QUERY triggers as well. When I run it on the server, I have to execute query manually, and then navigate to each of the detail blocks and then execute their queries manually too. When I do that, their POST_QUERY triggers are not firing.
Desktop is (Windows XP Professional version 5.1 build 2600.xpsp_sp3_gdr.100427-1636 : Service Pack 3)
Developer version is Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
Server version is OAS forms/reports install – 10.1.2.3
OS – x86-64bit (Red Hat Enterprise Linux Server release 5.4)hello,
does oracle showing any errors in user_scheduler_job_run_details for this job ? I would advise try inserting some debug statement to identify where exactly its stuck. Also please check sample configurations syntax for user_scheduler_jobs.
Cheers
Sush -
After upgrading ACS 3.3.1 to 4.2 on windows the local database is not working
Hi,
I have upgaded the ACS 3.3.1 for windows server to 4.2. Everything went fine but the local database is not working.
The CD is an upgrade kit from 3.x to 4.2 on windows. I tried to install directly the 4.2 I was able to install but integration with AD/LDAp is not working. Anysay its an upgrade kit so I cant expect it shoud work when install drectly the 4.2 but by upgrading from 3.3 to 4.2 everything should work fine.
I followed the upgradation path as recomended.
Also we have a requirment that once it is upgraded to 4.2 we need to shift the whole thing from the physical server to a virtual machine on VMware ESX server 3.5.
Can anybody pls guide me if anything else to do after the upgradation.
Thanks & Regards
SachiHi Javier,
First of all I was facing a problem of restoring the old database of 3.3 to 4.2. Somehow I overcame that issue by following the below steps. Now local authentication is working fine but AD/other External database authentication is not working. As you told the setting for the unknown users are configured to fetch the credentials from the external database if it is not in the local database.
Do we need to do anything in the AD itself?
Regards
Sachi
Steps for ACS upgrade to 4.2 version
Below are the requested steps mentioned for the up gradation from ACS 3.3.2 to ACS 4.2.
1) Take a configuration backup from existing ACS. ACS--->System
configuration----> ACS Backup
2) now if you have ACS 3.3.2 on server. take backup of the ACS
3) Insert the cd or if you have the set up on the system then Run the setup of ACS 3.3.4. During the process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 3.3.4 upgrade.
4) Once you are at 3.3.4, take a backup and keep it handy.
5) Run the setup of 4.1.1. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.1 upgrade.
6)Once you are at 4.1.1.24 take a backup and keep it handy.
7) Run the setup of 4.2. During this process it will prompt you to
upgrade existing configuration. Make sure you check that option else we will
loose the database. Now you need to hit next.next to finish the 4.2 upgrade.
8) Once you are at 4.2 take a backup and keep it handy. Now run the
patch 12 and take a backup again.
9) Now fresh install 4.2 on your new production server and install patch
12. Restore the 4.2 patch 12 backup and you should be all set. -
Orcale App Server and Database Server in a distributed setup
Hi,
I had a question about orcale db server. Now, as I understand it in a cluster there is one database SERVER and each machine in the cluster has access to the shared database server.
The entire cluster presents a unified view of the database server. To the developer it appears as though there is only one database server.
Is it possible to have several such clusters and run a query across these clusters in a transparent manner? Say I have Table 1 on database SERVER 1 and table 2 on database SERVER 2. Given the current architecture SERVER 1 is on CLUSTER 1 and SERVER 2 is on CLUSTER 2. Can I run a query joining Table 1 and Table 2 such that I do not have to worry about where CLUSTER 1 is and where CLUSTER 2 is? I am nit talking about partiitioning where one table is spread across nodes in a CLUSTER but is still within the same database server.
Regards,
SandeepHi,
I had a question about orcale db server. Now, as I understand it in a cluster there is one database SERVER and each machine in the cluster has access to the shared database server.
The entire cluster presents a unified view of the database server. To the developer it appears as though there is only one database server.
Is it possible to have several such clusters and run a query across these clusters in a transparent manner? Say I have Table 1 on database SERVER 1 and table 2 on database SERVER 2. Given the current architecture SERVER 1 is on CLUSTER 1 and SERVER 2 is on CLUSTER 2. Can I run a query joining Table 1 and Table 2 such that I do not have to worry about where CLUSTER 1 is and where CLUSTER 2 is? I am nit talking about partiitioning where one table is spread across nodes in a CLUSTER but is still within the same database server.
Regards,
Sandeep -
SSM - Configure Multiple Webserver's with a Single Database Server
Hi,
I need to install SSM using the following system landscape: Distributed system using a single database server and two webserver's.
The system is configured to use the Microsoft Network Load Balancing and that's the reason why exist two webserver's. When the user put the URL, the connection can be done to the webserver 1 or webserver 2 (the Microsoft Network Load Balancing will manage that).
I was checking the install guide "NW CE 7_1 SP5 SQL Server Install Guide.pdf" but there is no reference to this system landscape. The only "similar" is for High Availability System using Microsoft Cluster Service (MSCS), but that's not what I need.
I was planning to do a distributed installation and in the database server I will install:
- the Database Instance of NetWeaver
- the Database components of SSM (PAS)
In the Webserver I will install:
- the SCS Instance of NetWeaver
- the Primary Application Instance of NetWeaver
- the Web components of SSM (PIP, etc...)
For a scenario of a single webserver and a single database server, this work just fine.
My questions are:
- how can I configure SSM to work in a scenario of two webserver's and a single database server?
- Should I install the same components in both WebServer's?
- Should I use the same instance number or a different one?
- It is possible to have two netweaver instance sharing the same database?
Thanks in advance for all the help
Regards
PedroHi Pedro,
- how can I configure SSM to work in a scenario of two webserver's and a single database server?
Yes see below. But also make sure SAP will support the configuration you're planning!
- Should I install the same components in both WebServer's?
yes.
- Should I use the same instance number or a different one?
The same makes configuration eaiser
- It is possible to have two netweaver instance sharing the same database?
Not for the SCS but yes for application server (your Java instances)
The central services, SCS instance, are one per a SAP System. So you cannot install one on each Web Server and operate them simultaneously.
Given your database is also a single point of failure then I would suggest you install the SCS with it on the database server.
On each of the Web Servers install an application instance of SAP NW CE.
Since the instance are on different servers they can share the same instance number. It is not mandatory but it may make configuration easier. e.g. for the the webservice the port will not change.
There can only be one Interactive Publisher (PIP) running so this may as well also go on your database server.
The Pilot Application Server (PAS) there can be multiple of so install one on each Web Server.
See section 5.2.3 of Server Installation Guide SAP Strategy Management Release 7.0 Support Package 2 and higher for configuring SAP NW CE to point to the one instance on Interactive publisher.
See section 5.2.7 of Server Installation Guide SAP Strategy Management Release 7.0 Support Package 2 and higher for setting up the Web Service target in Interactive publisher this will need to use the virtual ip(or hostname) of your Network Load Balancer.
Best of luck.
Marcel. -
We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
I found a similar query from March 2014 found here
http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281
Has there been an update released to resolve this
Cheers DHi ,
According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support -
Hi,
look ( http://orcasoracle.blogspot.com/ ) at some statistics about the Patchsets of the Oracle 9.2 Database Server.
regards
CarlYes!
the problem is that .NET is availabe only on WinX Platforms.
I hve heared somethong of mono a .NET Framework on Linux/Unix.
But it's not only this base it's the question which tools/Patterns/Principials
they use to ensure high quality coding.
Carl -
Reading text file from database server in OA Page
Hi Guys,
I am trying to embed an applet with in an OA Page. The applet is used to mainly for showing Gantt chart. I have to pass my connection details from OA Page to applet, I dont pass directly the connection details to the applet so i am placing all the server details, user name and password in a text file on the database server.
So from the OA Page i have to read the contents of the file on the database server and pass them to the applet using the <PARAM> tag. My question is how to read the text file from the database server.Any Inputs?
Thanks in advance for your help.
Regards,
Nagesh Manda.If the file to be read is on the database, then it makes sense to use the pl/sql code to read the file. Make a call to this pl/sql code from page controller to get back the values.
--Shiv -
How can i connect to a Database Server (live data)?
hi,
i'm trying to figure out how i can create a dashboard that's connected to live data coming from a Database server. i have the username and password and the DB name, but can't find a direct way from within SAP dashboard design where i can make the connection.
MUST i go through XML?
i know other tools like Tableu that allow direct connections to the server.
is this possible?Hi Sam
Please refer to the tutorial http://scn.sap.com/docs/DOC-7946 and under "Connecting to Data Sources" section you will get the step by step guidance of various data connectivity options..
Basically the options available under Data > Connections > Add and Query Browser in Dashboards 4 are your options.
If you want to write direct SQL to get data you have to use add-ons InfoBurst like InfoBurst infosol.com/solutions/infoburst/
Runali -
Need help Installing OID Repository on existing database server using RepCA
I have an oracle database server running 10g (10.2.0.4) and I want to install metadata repository on it. I downloaded the Application Server Metadata Repository Creation Assistant 10.1.2.0.1 (standard edition).
I find that there are no batch files in the download, just setup.exe. When I run that I am asked for an ORA_HOME - when I provide the home where the database is installed I get the message that the home already has the database and the software cannot be installed on it.
How do I add the repository to an existing instance of oracle database server? Also, is the version I downloaded the right version #
ThanksHi sameer khan,
first let me ask, are you talking about Netweaver04s (WAS 7.00), in this case my answer can give you some hints.
Note 883948 gives information of the installation of an additional usage tye (like BI JAVA)
You have more than one possibility to install the usage type BI JAVA. The most common installation types are:
1. BI installation and a separate BI JAVA installation with 2 <SID>
2. BI JAVA Addin Installation in an existing NW04s
I recommend to use option 1:
In case you install a separate BI-JAVA instance, you need a separate <SID> for your J2EE environment. In this case it is not possible to use the same <SID>. This installation can be done on the same or a separate server. Furthermore, you can use a separate database or install the J2EE instance in the same database (--> MCOD). I recommend to use a separate database. Note: In this installation option, Sapinst normally installs a separate user store. With the usage type BI JAVA it makes (in most cases) sense, to use the user store of the BI system, where it belongs to. If you want to do so, "Revise" the user store option before you start the installation and and choose the production client of the BI system.
If you like to use an Addin Installation, another <SID> is not possible. I would only recommend this kind of installation in test environments.
It doesn't matter, which kind you choose, after installation, you have to do the steps for "Setting up bex Web", see Note 917950. This is sometimes a little bit tricky, with Note 937697 there is a Support Tool, which can help.
Good luck with your installation
Kind Regards
Marc -
Win32 Oracle 10g Database Server Installation problems
Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkkI can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock; -
Software to connect to a Oracle database server.
Does anyone know of software that enables me to connect to a Oracle database server, and check out the content? Doesn't need to have a gui.
Orjanp...JAVA + JDBC type 4.
-
Mimic Database/Server crash
Guys,
What is the best way to mimic Database/Server crash to test the backup and recovery strategy?
ThanksUnplug the server. I'm not joking, that's the way I do it on my laptop (on which I installed Oracle). If you want a more elegant way, a "shutdown abort" is exactly like an instance crash.
Daniel
Maybe you are looking for
-
Can't import photos from finepix A345 to iPhoto or Finepix viewer mac ibook
I had previously imported photos from my fuji finepix A345 camera to iPhoto on my macBookPro 10.4.9. Now I am trying to import new images from the same camera and iPhoto displays a message "no photos to import". I have installed Finepix viewer but it
-
Serius project problems - Need help please
Hi, I'm using adobe premiere and after effects to my last film (this is not the first time). I'm using DV 1280*720 default sound settings (as I did before in other movies). I have an Imac C2D and plenty of hard disk space. Yesterday when I import new
-
InDesign CS3 crashes when synchronizing a book
InDesign CS3 V5.02 repeatedly crashes (unkown software exception 0xc0000d) when synchronizing a book. It does not matter if the book was created with CS3 or CS2. If a book with several documents is opened with CS2, resynchronizing works as expected.
-
Changing up what happens at the 'select resource - queued' step
Greetings! So, I'm curious .. we'd like to change how we do things regarding what happens at the select resource - queued step. Our current state is a series of business checks, place the call on hold, play CUCM MOH, take the call off hold, go back t
-
I have been experiencing constant dysfunction in my Gmail calendar on my Mac Mini, but not on any other computer. It happens whether I am using Safari or Firefox. This morning Firefox sent a notice that is no longer works with Mac OS X 10. Suggest