Development, quality analysis & production servers

hi,
can anyone tell what is the use of Development server, Quality Analysis server & Production Server...pls... tell me what are its uses & where are they used? If we develop any project, it comes under which server? when will we use Production server.....
Thanks & Regards,
vijaya

Development Server - Used while you are developing your application (product). Its of general usage.
Quality Server - The application targetted to have some application only that meant to be shipped or used by customer. Here you can have environment similar to production system and test the application (product).
Production Server - Used to have the actual application (product). Used by customer directly.
Having different servers helps to control the development and maintainence of your product.
Regards,
Ashwani Kr Sharma

Similar Messages

Upgrade from 4.6C to ECC6.0 - development quality and production

Upgrade from 4.6C to ECC6.0
I have got three systems right now...
Development(D1) Quality(Q1) Production(P1).
These three systems need to be upgraded to ECC6.0
The recommended process is to copy D1 to a new temporary server(D2) and
then upgrade it. At the time of the copy we will have to run the transactions
SPDD and SPAU for which the one one transport requests will be created.
Now after the complete upgradation we will be running the UCCCHECK and SCUV.
The problem is after running this process we are going to copy the Quality(Q1)
to a new quality system Q2. Now the code in the D2 system is unicode complaint with all the
same functionalities as in D1.
How to get all the change and customizing objects which is updated in the D2 system
to the Q2 system (only the relevant ones - this will also ensure for PRD as the same process could be followed)?
Or else do we have to repeat the process for both the new quality(Q2) and new production(P2)
systems?
Useful answers will be rewarded accordingly....

Hi,
If you do SPDD and SPAU changes to create unique transports (as per upgrade guide) so the Q2 upgrade will have it embeded during the upgrade process then you should not have any problem because after the D2 combined upgrade (unicode and Technical Upgrade) the system will be in Unicode, UCCHECK is to check unicode compatibility as long as I know. You won´t need to use SPDD and SPAU again in Q2.
Also you could do Upgrade to D2, run UCCHECK and SCOV and then create all changes to objects that needs to be changed to create requests. Then do Q2 upgrade and when is finished then you move every transport you need from D2 to Q2 to do the necesary tests, it should not take much time. In the upgrades I know and done this is the way the changes were moved up to PRD, we have never used the unique transport request mentioned in the Guide. During Quality tests developers and funtional consultants will need to keep doing changes until everything is OK so even if you create unique requests, you will also have to transport after PRD upgrade.
Either way you won't need to run SPDD and SPAU after D2 upgrade.
Good luck
Edited by: AC on Nov 18, 2008 1:26 PM

What are the Phases in Development ,Quality and Production

Development-----> CREATING PROCESS CHAIN,IF, DSO , QUERY IN BEX WHAT ELSE IN QUALITY AND PRODUCTION AND IMPLEMENTATION.

Hi Suri,
SCN won't teach any modules here.
If your under training please ask your trainer or refer your training notes.
Even on Google you can search and help yourself.
in future also please never ask basic questions here.Soon your thread will be hidden.
if your new to scn please read scxn rules.
The SCN Rules of Engagement
Getting Started with SCN
Thanks

Development, quality and produntion servers.

Hi All,
please let me know the the procedure in which data are transferred from development server to quality server and from there to production server.
Also give an example of how the testing is done in the quality server.
Does consultant have any job to be done in the production server?

Hi
Your understanding is correct.
Development -
> Quality
Move TRs from Development to Quality till the time it is working as expected by business / comitted to business....
Development -
> Production
Once the results in Quality (post UAT) are satisfactory, move the TRs from development to Production....
Good Luck !!!!
Kumarpal Jain.

Deploying BO universes and webi reports in quality and production

Hi
We are on BO XIR2 SP5 and reporting on SAP BI Infocubes and Queries.
We have 3 environments setup,each for development,quality and production.
During universe development,while creating a new connection we provide the IP address of application server,username ,password,system id,client number etc details.
The above details would defer for 3 different environments.In our case we have built around 50 universes.
So what would be the smart way of deploying these universes in each of the other 2 environments?Because changing universe connection details would mean re creating the universe classes and objects which would be a huge effort.Would the webi reports continue to work upon re creating the universe with new connection details?
Please suggest a best and smart practice for the above scenario.

Hi,
Using Import Wizard tool in BO you can migrate Universe and Reports from dev env to test.
Using the Import Wizard tool you can migrate the reports.
Steps are as follows:
Open Import window:
In Source environment , enter the details of dev environment.
Destination wizard you have to enter Test env credentials.
Then you have to select all the universe and the wid files from this wizard (The files you want to transfer ).
Finally finish this wizard by pressing finish button.........
Hope this will help you
Regards
Sindhu

Browser IE7.0 does not support WebDynpro in Quality and production only

Hi All,
Our portal version is NW04 SP15 adn NWDI is on NW700.We have Development ,Quality and production portal.We are using browser IE6.0 to see the WebDynpro application as we are unable to see the webdynpro application on browser IE7.0.We are gettimg message "Browser does not support WebDynpro".
However few days ago suddenly we are able to see webdynpro application on browser IE7.0 in the Development portal only.When we open the quality and production url on the browser IE7.0 we are getting error message "Browser does not support webdynpro".
Our Basis team askes us to analyze when we open the development url on IE7.0 we are able to see webDynpro application where as when we open the quality and prosuction url on browser IE 7.0 we are getting message "Browser does not support webdynpro"
Can anybody tell why does IE7 work in development (PWD), but not in other EP6 instances quality(PWQ), production (PWP)?
Thanks
Susmita

Hi
Thanks for all your response.
I have alredy gone through the forums why IE 7.0 doesnot support WebDynpro.What to do to make IE7.0 work for webDynpro(SAP note 991449).
I have already told basis team regarding the behaviour of IE7.0.However basis team is sticking to their question what has done in the development so that IE7.0 is working for WebDynpro in Development.
I will ask the patch level from basis team for Development,Quality,production.May be patch is different thats why Dev is working in IE7.0 and not in quality and production.
I am sure the issue not related to code or iView property and related to IE property.Is anything done on the Development instance PWD at Server so that we are able to see webdynpro on IE7.0 for development?
What i need to check in the url https://websmp106.sap-ag.de/pam as i am new to this url.
Thanks
Susmita

Patches difference in development, quality & production

Hi,
Our Development & Quality environment is on patchlevel
SAP_ABA 700 0018
SAP_BASIS 700 0018
PI_BASIS 2005_1_700 0018
SAP_BW 700 0020
Our Production server is on
SAP_ABA 700 0019
SAP_BASIS 700 0019
PI_BASIS 2005_1_700 0019
SAP_BW 700 0021
Golive is next week. already developments and configuration are moved to quality and testing is going on.
Now i want to upgrade the patches in dev & quality to production level.
After that only i ll move the transports to production.
Please suggest us whether any problems will come in developments & configurations when the transports are moved to production.
Regards,
Raj

It's difficult to commnet on.
Best is building a Sandbox by copying production system , moving all those transports there and test. Then if everything is fine, upgrade quality and devlopment.
But in any case , do you want to downgrade production patch level if any problem occurs after moving the transports to PRD?
If the answer is NO, then you can upgrade quality first and test new patch level. If you find any problem try to solve that ( may be by applying some notes or rasing a message with SAP)
I can make sure at least PI_BASIS 2005_1_700 0018 upgrade will not pose any problem.
Regards
Anindya

Tcode in production client but not in development & quality client

I am facing this particular situation, I am seeing a particular Ztode which is in production client but not in development & quality client
Is it possible to have a tcode in production client but not in development & quality client, If yes what would be the reasons for maining in production client but not in development & quality client

It could be a local object that a person who has developer access in production created. This is unusual, but not unheard of.
Or the transaction could have been deleted in DEV and the deletion transported to QA but not PRD.
Rob

SAP TAO,What is the purpose of Development,Quality,Production environment?

Hi All,
What is the significance of Development,Quality,Production environment under license tab of configuration in SAP TAO.
Which environment has to be selected for better operatability of SAP TAO functions.
Thanks and Regards,
Ujwal Kandimalla

Hi,
As TAO deals with the testing aspect, a 3 system landscape is recommended:
DEV : For unit testing
QA: For system testing and integrated testing
PRD: Has to be available for production usage
You could also have a Pre-Prod for load and UAT.
Regards,
Srikishan

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
 Execution of programs after import (XPRA)
 Transport request : RBDK904992
 System : RBP
 tp path : tp
 Version and release: 372.04.04 700
 Post-import methods for change/transport request: RBDK904992
 Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
 Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
 Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
 Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
 The errors affect the following components:
 BW-WHM (Warehouse Management)
 Post-import methods of change/transport request RBDK904992 completed
 Start of subsequent processing ... 20080406140407
 End of subsequent processing... 20080406140408
 Execute reports for change/transport request: RBDK904992
 Reports for change/transport request RBDK904992 have been executed
 Start of................ 20080406140408
 End of.................. 20080406140408
 Execution of programs after import (XPRA)
 End date and time : 20080406140408
 Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Vendor master Creation in Development Server and Production Server - ASAP

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Hello everyone,
I just want to know that how to transfer the vendor accounts or vendor master data from dev client to Prod client?
Vendor accounts are already in the dev client, created mannually, any one please guide me how to transfer these vendor accounts in the prod server, without the USE OF LSMW.
Please Reply ASAP
Thanks
M

Hi
Your understanding is correct.
Development -
> Quality
Move TRs from Development to Quality till the time it is working as expected by business / comitted to business....
Development -
> Production
Once the results in Quality (post UAT) are satisfactory, move the TRs from development to Production....
Good Luck !!!!
Kumarpal Jain.

How i can transport request created in R3AR2 from Quality to Production ?

Hi, Gurus !
I'm new in CRM 7.0, and need your help. Well, we made our implementation in 7.0 version, and the things will be fine, until the start of work.....
Well, the initial download of CUSTOMER_MAIN (in transaction R3AR2) do'n't run OK, because a lot of customers in selection have a bad data.... and this time, anybody change this data,
Today, i know how to re-made this task.....
But my question is : how can transport this request, created in R3AR2, from Quality to Production ?
If the transport is not possible, the answer for the question is remake the request in Production ?
Thank you very much.....
Loduca

Did you put your development in a transport when you first saved it? If yes, and if your transport system is properly configured you can release the transport using SE09 and import it into the production using transaction STMS.
Markus

Process of moving TR from Quality to Production

Dear Experts,
we are in a process of moving TR from Quality to Production. While moving we faced transport incositencies like some old requests have been overwritten into the new one and dependant objects were failed during import in PRD. Now production rehearsal client is kind of messed up. what is the right procedure to transport the requests from Quality to Production. (actually we transferred the TR individually based on the list send by the respectivr module owners). Please help me to findout the solution for this issue.
regards,
Yasin.

Hi,
This situation comes every now & then when you don't have any client strategy define in your landscape I'm not blaming you but for your Project Manager and then rest of the team adopt SAP standard practice if you really want things to go well act NOW..!! here is the basic to start:
Ex,
DEV ::
100 => Golden Client
200 => Customizing Client
300 => Test Client
Things to check before importing request in QAS :
1) Always get the request in sequence format ask the owner of the request for the sequence to avoid dependency issues
2) Technical Specification doc - this doc will be prepare by Functional / Developer on what changes are included in TR
QAS::
400 => Quality Client
Things to check before importing request in PRD :
1) User acceptance doc i.e UAT - client / customer will check the functionality if it's on then move this to PRD
2) Get the request in sequence format
3) Approval for production transport
PRD::
500 => Production Client
Thanks,
Saleem

Transport of object from Quality to Production.

Hi,
I am a technical designer and have a limited understanding on the transport management system and basis.
I had recently created an object on the development system and provided my user with the transport request number. She had moved it to Quality and tested it. The object is working fine and she wants to move it to the production system.
I was under the impression that the request would show up on the production system and could be imported from quality but it is not.
Could some one explain as to what I am missing here? Is there anything I could do from my side to get the object moved from Quality to Production?
Regards,
Prem.

Hi Prem
Plz check whether your request is relased and transported
correctly.
for this log into quality system and type the tcode STMS_IMPORT.
search for your request,
if available ,check if there is a green tick mark against that, if yes then it can be imported to production system ( that has to be done by your BASIS personell).
if not,
check any filter criteria is set in the fields displayed and remove / change if required that as per requirement.
or , use the menu path GOTO -> IMPORT HISTORY (Ctrl+F7) and search ther (here also check for the filter criteria).
it should be available, if it is transported correctly.
do the same in your production system also, u can find your request (but unless transported to production there will not be the green tick mark against that)
reward if useful.
Regards
Prabumanoharan

Transport of Employees from Quality to Production

Hello,
This is regarding Employee assignment in CRM Sales Organizations (using T code PPOMA_CRM). We have around 1200 employees to be assigned in CRM Sales Organizations & we have to assign USER ID's for each of these employees.Since we do not have all 1200 employee master data in Development Server we will have to do this excercise in Quality Server. We want to save all these assignments in a Transport request directly from Quality server, so later same can be transported to Production Server .
Kindly let me know standard procedure for transporting all the assignments of employees & user ids from Quality to Production.
Regards,
Rajendra

Hi Rajendra,
Salesorganisation assignment to employee is masterdata and it willl not involve any tranport .
You need to create the assignment in production client. Sales organisation Id will change from client to
Client.
Regards
Pavan.A

Development, quality analysis & production servers

Similar Messages

Maybe you are looking for